Environmental and Cost Assessment of Several Injection Molded Powder Electronics Packaging Materials

2011 ◽  
Author(s):  
Misha V. Sahakian ◽  
Malcolm O. Brown ◽  
Sundar V. Atre ◽  
Karl R. Haapala
Keyword(s):  
Environmental Impact ◽  
Electronics Packaging ◽  
Packaging Materials ◽  
Performance Study ◽  
Cost Performance ◽  
The Past ◽  
Injection Molded ◽  
Relative Differences ◽  
Transfer Properties ◽  
Better Than

Electronics manufacturing technology has been advancing at an increasing rate for the past few decades and has forced related industries to do the same. One related industry involves the packaging technology used to enclose chips for power electronics. As demands of electronics manufacturers continue to increase in terms of cost, performance, and environmental impacts, so do demands on the packaging technologies involved. A variety of packaging materials have been used and proposed. The performance of each material varies in terms of ease of manufacturing, as well as its heat transfer properties. This study addresses performance, cost, and environmental impact measures to assist in selecting the most appropriate electronics packaging material. A performance study identified epoxy, aluminum nitride (AlN), and silicon carbide (SiC) to be the most viable options. Further analysis then found that epoxy outperforms the other options in terms of cost and environmental impact on a per-part basis, with AlN shown to be slightly better than SiC according to both metrics. Since it is known that AlN and SiC have superior material performance to epoxy packaging, further investigation is warranted to elucidate these relative differences, which will result in a more representative functional unit for comparative analysis.

Implementasi Algoritma Hamming Distance dan Brute Force dalam Mendeteksi Kemiripan Source Code Bahasa Pemrograman C

2017 ◽  
Vol 8 (2) ◽  
Author(s):  
Andreas Budiman ◽  
Dennis Gunawan ◽  
Seng Hansun
Keyword(s):  
College Presidents ◽  
Hamming Distance ◽  
Source Code ◽  
Structural Type ◽  
Brute Force ◽  
Important Thing ◽  
The Past ◽  
Index Terms ◽  
Better Than

Plagiarism is a behavior that causes violence of copyrights. Survey shows 55% of college presidents say that plagiarism in students’ papers has increased over the past 10 years. Therefore, an application for detecting plagiarism is needed, especially for teachers. This plagiarism checker application is made by using Visual C# 2010. The plagiarism checker uses hamming distance algorithm for matching line code of the source code. This algorithm works by matching the same length string of the code programs. Thus, it needs brute will be matched with hamming distance. Another important thing for detecting plagiarism is the preprocessing, which is used to help the algorithm for detecting plagiarized source code. This paper shows that the application works good in detecting plagiarism, the hamming distance algorithm and brute force algorithm works better than levenstein distance algorithm for detecting structural type of plagiarism and this thesis also shows that the preprocessing could help the application to increase its percentage and its accuracy. Index Terms—Brute Force, Hamming Distance, Plagiarisme, Preprocessing.

Ways of Being and Time

2017 ◽  
Author(s):  
Kris McDaniel
Keyword(s):  
Being And Time ◽  
Present Moment ◽  
Ontological Pluralism ◽  
The Past ◽  
Mode Of Being ◽  
Ways Of Being ◽  
Better Than

This chapter develops a version of ontological pluralism that respects two common intuitions about time: that the present moment is metaphysically distinguished but not in such a way that the past is unreal. The version of ontological pluralism developed—presentist existential pluralism (PEP)—embraces two modes of being, the mode of being that present objects enjoy and the mode of being that past objects enjoy. The author argues that this view fares at least as well, and probably better, than other views in which the present is metaphysically distinguished. The chapter also introduces another form of ontological superiority called “levels of being.”

scholarly journals A Review of the Applications and Biodegradation of Polyhy-droxyalkanoates and Poly(lactic acid) and Its Composites

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1544
Author(s):  
Jet Yin Boey ◽  
Lydia Mohamad ◽  
Yong Sen Khok ◽  
Guan Seng Tay ◽  
Siti Baidurah
Keyword(s):  
Food Packaging ◽  
Synthesis Process ◽  
Poly Lactic Acid ◽  
Packaging Materials ◽  
The Past ◽  
Food Packaging Materials ◽  
Potential Alternative ◽  
Negative Impacts ◽  
Available Information ◽  
Potential Food

Overconsumption of plastic goods and improper handling of petroleum-derived plastic waste have brought a plethora of negative impacts to the environment, ecosystem and human health due to its recalcitrance to degradation. These drawbacks become the main driving force behind finding biopolymers with the degradable properties. With the advancement in biopolymer research, polyhydroxyalkanoate (PHA) and poly(lacyic acid) (PLA) and its composites have been alluded to as a potential alternative to replace the petrochemical counterpart. This review highlights the current synthesis process and application of PHAs and PLA and its composites for food packaging materials and coatings. These biopolymers can be further ameliorated to enhance their applicability and are discussed by including the current commercially available packaging products. Factors influencing biodegradation are outlined in the latter part of this review. The main aim of this review article is to organize the scattered available information on various aspects of PHAs and PLA, and its composites for packaging application purposes. It is evident from a literature survey of about 140 recently published papers from the past 15 years that PLA and PHA show excellent physical properties as potential food packaging materials.

Taking Peritoneal Dialysis beyond the Year 2000

1999 ◽  
Vol 19 (3_suppl) ◽  
pp. 35-42 ◽  
Author(s):  
Ram Gokal
Keyword(s):  
Peritoneal Dialysis ◽  
Peritoneal Membrane ◽  
Membrane Function ◽  
Fluid Removal ◽  
The Past ◽  
First Choice ◽  
Year 2000 ◽  
Economic Considerations ◽  
Appropriate Prescription ◽  
Better Than

Over the past 25 years, peritoneal dialysis (PD) has steadily improved so that now its outcomes, in the form of patient survival, are equivalent to, and at times better than, those for hemodialysis. We now have a better understanding of the pathophysiology of peritoneal membrane function and damage and the importance of appropriate prescription to meet agreed-upon targets of solute and fluid removal. In the next millennium, greater emphasis will be put on prescription setting and subsequent monitoring. This will entail an increase in automated PD, especially for lifestyle reasons as well as for patients with a hyperpermeable peritoneal membrane. To improve outcomes, dialysis should be started earlier than is currently the case. It is easy to do this with PD, where an incremental approach is made easier by the introduction of icodextrin for long-dwell PD. In the future, solutions will be tailored to be more biocompatible and to provide improved nutrition and better cardiovascular outcomes. Finally, economic considerations favor PD, which is cheaper than in-centre hemodialysis. Thus, for many, PD has become a first-choice therapy, and with further improvements this trend will continue.

Frozen Negotiations: The Peace Process in Chiapas

2006 ◽  
Vol 22 (1) ◽  
pp. 131-152 ◽  
Author(s):  
Raúúl Beníítez Manaut ◽  
Andrew Selee ◽  
Cynthia J. Arnson
Keyword(s):  
Armed Conflict ◽  
Democratic Transition ◽  
Political Process ◽  
Peace Process ◽  
Democratic Society ◽  
The Political ◽  
Peace Agreement ◽  
The Past ◽  
The Government ◽  
Better Than

Mexico's democratic transition has helped reduce, if not eliminate, the threat of renewed armed conflict in Chiapas. However, absent more active measures from the government and the Ejéército Zapatista de Liberacióón Nacional (EZLN) to seek a permanent peace agreement and come to terms with the legacies of the past, the conflict will linger on in an unstable déétente, which we term ““armed peace.”” While this situation is far better than the open hostilities of the past, it also belies the promise of a fully democratic society in which all citizens are equally included in the political process. La transicióón democráática en Mééxico ha contribuido a reducir, si no eliminar, la posibilidad de que el conflicto armado en Chiapas se reanude. Sin embargo, sin esfuerzos mas activos por parte del gobierno y del Ejéército Zapatista de Liberacióón Nacional (EZLN) para buscar un acuerdo de paz permanente y saldar cuentas con el pasado, el conflicto permaneceráá en un estado inestable que llamamos ““paz armada””. Aunque esta situacióón es mucho mejor que las tensiones y agresiones del pasado, no cumple los requisitos de una sociedad plenamente democráática en que todos los ciudadanos participan en condiciones de igualdad en el proceso políítico.

scholarly journals Validation of SCIAMACHY limb NO<sub>2</sub> profiles using solar occultation measurements

2011 ◽  
Vol 4 (4) ◽  
pp. 4753-4800
Author(s):  
R. Bauer ◽  
A. Rozanov ◽  
C. A. McLinden ◽  
L. L. Gordley ◽  
W. Lotz ◽  
...  
Keyword(s):  
The Past ◽  
Middle Latitudes ◽  
Solar Occultation ◽  
Time Period ◽  
Vertical Distributions ◽  
Global Coverage ◽  
Scanning Imaging ◽  
Diurnal Effect ◽  
Better Than ◽  
Balloon Measurements

Abstract. The increasing amounts of reactive nitrogen in the stratosphere necessitates accurate global measurements of stratospheric nitrogen dioxide (NO2). Over the past decade, the SCIAMACHY (SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY) instrument on ENVISAT (European Environmental Satellite) has been providing global coverage of stratospheric NO2 every 6 days, which is otherwise difficult to achieve with other systems (e.g. balloon measurements, solar occultation). In this study, the vertical distributions of NO2 retrieved from limb measurements of the scattered solar light from the SCIAMACHY instrument are validated using NO2 products from three different satellite instruments (SAGE II, HALOE and ACE-FTS). The retrieval approach, as well as the sensitivity of the SCIAMACHY NO2 limb data product are discussed, and the photochemical corrections needed to make this validation feasible, as well as the chosen collocation criteria are described. For each instrument, a time period of two years is analyzed with several hundreds of collocation pairs for each year and instrument. The agreement between SCIAMACHY and each instrument is found to be better than 10 % between 22–24 km and 40 km. Additionally, NO2 amounts in three different latitude regions are validated individually, with considerably better agreements in high and middle latitudes compared to tropics. Differences with SAGE II and ACE-FTS below 20 km are consistent with those expected from the diurnal effect.

Pigmented aqueous barrier coatings

TAPPI Journal ◽  
2020 ◽  
Vol 19 (11) ◽  
pp. 551-558
Author(s):  
ANTHONY V. LYONS ◽  
GREGG REED
Keyword(s):  
Barrier Function ◽  
Packaging Material ◽  
Physical Characteristics ◽  
Packaging Materials ◽  
Functional Coatings ◽  
Barrier Coatings ◽  
Coating Performance ◽  
Fundamental Understanding ◽  
Sustainable Packaging ◽  
Better Than

The desire for more sustainable packaging has led to the development of new packaging materials that are fiber based. Aqueous coatings are a pathway to improve the recyclability of these materials. Pigments used in these coatings can improve the performance of the coating and reduce cost while further improving the recyclability. Mineral pigments are also considered to be compost neutral. In this paper, we provide the reader a better fundamental understanding of the mechanisms by which pigments work in barrier coatings. A pigment’s mineralogy and physical characteristics are important to how it will perform, and there have been recent pigment developments that improve coating performance. This paper shows that some pigments are better than others in particular barrier applications. Also, pigmented base or pre-coats can be used to prepare the surface for more highly functional coatings that go on top, improving the barrier function of packaging material and reducing overall cost. Finally, the converting operation is of major importance in driving formulation choices for barrier applications.

A Different View of Surfactant Development

PEDIATRICS ◽  
1992 ◽  
Vol 89 (1) ◽  
pp. 172-173
Author(s):  
JOHN KATTWINKEL
Keyword(s):  
Respiratory Distress Syndrome ◽  
Respiratory Distress ◽  
Drug Administration ◽  
Distress Syndrome ◽  
Research Groups ◽  
The Past ◽  
Joint Product ◽  
International Joint ◽  
Neonatal Respiratory Distress ◽  
Better Than

To the Editor.— Dr Lucey has praised the neonatology profession for finally "getting it right" in its recent development of surfactant therapy for neonatal respiratory distress syndrome.1 Although, in some respects, I agree that we have done it better than in the past, I believe there needs to be an opposing view presented to his uniformly rosy assessment. Yes, we do have a "therapy which we know works and is safe," and which was an international joint product of research groups, industry, and the Food and Drug Administration.

scholarly journals LifeChair: A Conductive Fabric Sensor-Based Smart Cushion for Actively Shaping Sitting Posture

Sensors ◽  
2018 ◽  
Vol 18 (7) ◽  
pp. 2261 ◽  
Author(s):  
Karlos Ishac ◽  
Kenji Suzuki
Keyword(s):  
Detection Accuracy ◽  
Upright Posture ◽  
Performance Study ◽  
Vibrotactile Feedback ◽  
Pressure Sensing ◽  
Sitting Posture ◽  
Conductive Fabric ◽  
The Past ◽  
Sensing System ◽  
Average Accuracy

The LifeChair is a smart cushion that provides vibrotactile feedback by actively sensing and classifying sitting postures to encourage upright posture and reduce slouching. The key component of the LifeChair is our novel conductive fabric pressure sensing array. Fabric sensors have been explored in the past, but a full sensing solution for embedded real world use has not been proposed. We have designed our system with commercial use in mind, and as a result, it has a high focus on manufacturability, cost-effectiveness and adaptiveness. We demonstrate the performance of our fabric sensing system by installing it into the LifeChair and comparing its posture detection accuracy with our previous study that implemented a conventional flexible printed PCB-sensing system. In this study, it is shown that the LifeChair can detect all 11 postures across 20 participants with an improved average accuracy of 98.1%, and it demonstrates significantly lower variance when interfacing with different users. We also conduct a performance study with 10 participants to evaluate the effectiveness of the LifeChair device in improving upright posture and reducing slouching. Our performance study demonstrates that the LifeChair is effective in encouraging users to sit upright with an increase of 68.1% in time spent seated upright when vibrotactile feedback is activated.

Sign in / Sign up

Export Citation Format

Share Document