scholarly journals A New Operation for Producing Disease-Suppressive Compost from Grass Clippings

1998 ◽  
Vol 64 (10) ◽  
pp. 4015-4020 ◽  
Author(s):  
Kiyohiko Nakasaki ◽  
Sachiko Hiraoka ◽  
Hiroyuki Nagata
Keyword(s):  
Population Density ◽  
High Speed ◽  
Pathogenic Fungus ◽  
Dry Weight ◽  
Raw Material ◽  
Golf Courses ◽  
Initial Stage ◽  
Mesophilic Bacterium ◽  
Patch Disease ◽  
Made In

ABSTRACT This study evaluated the use of grass clippings discharged from golf courses as the raw material for production of a suppressive compost to control Rhizoctonia large-patch disease in mascarene grass. Bacillus subtilis N4, a mesophilic bacterium with suppressive effects on the pathogenic fungusRhizoctonia solani AG2-2, was used as an inoculum in a procedure developed with the aim of controlling composting temperatures and inoculation timing. The population density of mesophilic bacteria in the raw material was reduced to around 5 log10 CFU/g (dry weight) of composting material in the self-heating reaction at the initial stage of composting by maintaining a temperature of 80°C for 1 day. The inoculum was applied immediately, and the composting material was maintained at 40°C for 3 days. This served both to highly concentrate the suppressive bacterium and to achieve sporulation. The temperature was then raised to 60°C and maintained, enabling hygienic, high-speed composting while maintaining the population density of the suppressive bacterium as high as 8 log10 CFU/g (dry weight) in the compost. The suppressiveness of compost made in this way was confirmed in a turf grass disease prevention assay.

Community based design approach as initial stage to promote urban composting from a Hill Station of the Philippines

2019 ◽  
Author(s):  
Marcelino Jr Lunag ◽  
Jessie C. Elauria ◽  
Juanito D. Burguillos
Keyword(s):  
Population Density ◽  
Community Involvement ◽  
The Philippines ◽  
Design Stage ◽  
High Population Density ◽  
Community Based ◽  
Hill Station ◽  
Initial Stage ◽  
Household Members ◽  
Community Based Design

This study confirms that lack of space due to high population density restricts household members and the barangay to comply with the existing law regarding composting. With these, community involvement in the design stage of compost bin as initial stage was done accordingly. The participants were voluntarily interviewed and were given questionnaires, which was endorsed and approved by barangay committee.

Activated Sludge Exocellular Material Extraction Methods and Problems

1974 ◽  
Vol 9 (1) ◽  
pp. 250-261
Author(s):  
D.F. Carr ◽  
J. Ganczarczyk
Keyword(s):  
Activated Sludge ◽  
High Speed ◽  
Sewage Treatment ◽  
Dry Weight ◽  
Extraction Methods ◽  
Volatile Material ◽  
Bacterial Cultures ◽  
Volatile Solids ◽  
Pure Bacterial Cultures ◽  
Material Extraction

Abstract Activated sludge samples from two Toronto sewage treatment plants were subjected to the extraction of exocellular material by means of 9 different methods suggested for this purpose. Some of those methods, originally developed for pure bacterial cultures, were modified for the application to activated sludge. The amount of exocellular material obtained varied for Lakeview sludges from 0.4 to 3.2% of their dry volatile solids, and for Humber sludges from 0.3 to 5.3%. It has been found that extractions by the use of sulphuric acid, high-speed centrifugation and sodium hydroxide, were not suitable for the studied material. Especially surprising was the ineffectiveness of high-speed centrifugation to yield any measurable amounts of extract. The boiling water extraction is recommended for further studies on activated sludge exocellular material. The material extracted from activated sludge is very complex in nature. Generally more polysaccharide than protein was extracted, but the remaining volatile material may form up to 70% of the dry weight.

scholarly journals Co-Microencapsulated Black Rice Anthocyanins and Lactic Acid Bacteria: Evidence on Powders Profile and In Vitro Digestion

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2579
Author(s):  
Carmen-Alina Bolea ◽  
Mihaela Cotârleț ◽  
Elena Enachi ◽  
Vasilica Barbu ◽  
Nicoleta Stănciuc
Keyword(s):  
Lactic Acid ◽  
Lactic Acid Bacteria ◽  
Oryza Sativa L ◽  
Milk Proteins ◽  
Ethanolic Extract ◽  
Dry Weight ◽  
Hot Water ◽  
Raw Material ◽  
Black Rice

Two multi-functional powders, in terms of anthocyanins from black rice (Oryza sativa L.) and lactic acid bacteria (Lactobacillus paracasei, L. casei 431®) were obtained through co-microencapsulation into a biopolymer matrix composed of milk proteins and inulin. Two extracts were obtained using black rice flour as a raw material and hot water and ethanol as solvents. Both powders (called P1 for aqueous extract and P2 for ethanolic extract) proved to be rich sources of valuable bioactives, with microencapsulation efficiency up to 80%, both for anthocyanins and lactic acid bacteria. A higher content of anthocyanins was found in P1, of 102.91 ± 1.83 mg cyanindin-3-O-glucoside (C3G)/g dry weight (DW) when compared with only 27.60 ± 17.36 mg C3G/g DW in P2. The morphological analysis revealed the presence of large, thin, and fragile structures, with different sizes. A different pattern of gastric digestion was observed, with a highly protective effect of the matrix in P1 and a maximum decrease in anthocyanins of approximatively 44% in P2. In intestinal juice, the anthocyanins decreased significantly in P2, reaching a maximum of 97% at the end of digestion; whereas in P1, more than 45% from the initial anthocyanins content remained in the microparticles. Overall, the short-term storage stability test revealed a release of bioactive from P2 and a decrease in P1. The viable cells of lactic acid bacteria after 21 days of storage reached 7 log colony forming units (CFU)/g DW.

Paper 23: The Collision of Drops with Dry and Wet Surfaces in an Air Atmosphere

1969 ◽  
Vol 184 (7) ◽  
pp. 57-63
Author(s):  
G. J. Parker ◽  
E. Bruen
Keyword(s):  
Steam Turbine ◽  
High Speed ◽  
Size Range ◽  
Drop Surface ◽  
Wet Steam ◽  
Air Atmosphere ◽  
Made In

This paper describes an investigation into the behaviour of drops which impinge upon dry and wet surfaces. This is of particular interest in the context of the wet steam turbine. Two approaches have been made in the studies; these are: (1) Drops were made to impinge normally on to various types of dry, stationary surfaces. The drops were in the size range 300–1500 μm diameter with velocities of 2–9 m/s. (2) Drops were made to impinge on to surfaces moving with considerable velocity at right angles to the motion of the drop. Surface velocities ranged up to 45 m/s. The latter study is of direct interest for the splashing of drops on turbine casings at small glancing angles, as occurs near drainage belts. Analysis of the mechanisms involved is made from the records of high-speed ciné photography.

Microstructure, Mechanical Properties, and Electrical Resistivities of Mica Glass-Ceramics with Flake Phlogopite and Waste Glass

2014 ◽  
Vol 602-603 ◽  
pp. 640-643
Author(s):  
Yu Fei Chen ◽  
Yan Gai Liu ◽  
Xiao Wen Wu ◽  
Zhao Hui Huang ◽  
Ming Hao Fang
Keyword(s):  
High Speed ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Glass Ceramics ◽  
Waste Glass ◽  
Raw Material ◽  
Bending Test ◽  
Electric Locomotive ◽  
Molding Process ◽  
Electrical Resistivities

Mica glass-ceramics can be applied in all kinds of electrical equipment, locomotive internal circuits in high-speed rail, ordinary electric locomotive and subway locomotive. In this study, mica glass-ceramics were prepared by sintering process using flake mica and waste glass as the main raw material with low cost. Different mica glass-ceramic samples were fabricated by changing the formula of raw materials, molding process and sintering temperature. X-ray diffraction, scanning electron microscopy, three-point bending test, and balanced-bridge technique were applied to investigate the phase, microstructure, mechanical and electrical resistivities of the samples, respectively. The results show that the optimum sintering temperature is 900 to 1000 °C holding for two hours, the desirable ratio is 70 wt% of mica powder while 30 wt% of glass powder. In that condition the sample could be less porosity, high flexural strength (63.3 MPa) and eligible electrical resistivity (0.4×1013 Ω·cm).

scholarly journals Use of the copepod Oithona hebes as a bioencapsulator of essential fatty acids

2015 ◽  
Vol 63 (3) ◽  
pp. 331-336 ◽  
Author(s):  
Marcia Vanacor Barroso ◽  
Breno Barroso Boos ◽  
Rosemar Antoniassi ◽  
Luiz Fernando Loureiro Fernandes
Keyword(s):  
Essential Fatty Acids ◽  
Subsurface Layer ◽  
Dry Weight ◽  
Estuarine System ◽  
Chaetoceros Gracilis ◽  
Final Population ◽  
Freeze Dried ◽  
The Mean ◽  
Conical Tanks ◽  
Made In

AbstractThe advantages of using copepods in aquaculture include nutritional superiority, high digestibility and broad spectrum of sizes, with the possibility of bioencapsulation of nutrients, probiotics and medicines. This study aimed to compare the effects of feeding copepods with a microalgae diet and two commercial inert diets on the copepod culture performance and their fatty acid profile. Wild copepods were collected in the estuarine system of Piraquê-açu River, Aracruz, Espírito Santo, Brazil, with a conical net of 60 cm in diameter and 200 μm mesh with a blind cup end, towed through the subsurface layer at a speed of 1 knot for 5 minutes. Once collected, the material was sieved in order to select only Oithona hebes. The experiment was conducted in nine cylindrical-conical tanks with a 60 L capacity, salinity of 25.8 ± 1.3, temperature of 25.5 ± 0.5 ºC and weak aeration, stocked with a density of 1.5 copepod/mL. Treatments were made in triplicate and consisted of: Treatment 1 (Control) fed with microalgae Chaetoceros gracilis and Nannochloropsis oculata (1:1) with 50,000 cells.mL-1each; Treatment 2 with S.Parkle® INVE (1g.million-1); and Treatment 3 with freeze-dried spirulina (1g.million-1). The mean final population was compared by a Tukey test (p < 0.05). Results showed higher population growth for copepods treated with S.parkle, which was the only treatment that presented copepodites. S.parkle was a good source of total lipids (9.54 g.100g-1 dry weight), high availability of DHA, EPA and had a good DHA:EPA:ARA ratio of 12.4:3.4:1.0. Copepods that were fed S.parkle had the highest DHA levels and a DHA:EPA:ARA ratio of 15.4:2.2:1.0. This study showed that S.parkle is a good inert food for rearing the copepod O. hebes, demonstrating the ability of copepods to bioencapsulate nutrients, allowing their transfer in the food chain.

scholarly journals Use of seed treatment with fungicide in control of colletotrichum truncatum and physiological quality of soybean seeds glycine max

2013 ◽  
Vol 4 (2) ◽  
pp. 98-106
Author(s):  
Vinícius Almeida Oliveira ◽  
Lorenxo Paradiso Martins ◽  
Rogério Cavalcante Gonçalves ◽  
Luíz Paulo Figueredo Benício ◽  
Daniella Lima da Costa ◽  
...  
Keyword(s):  
Glycine Max ◽  
Seed Treatment ◽  
Pathogenic Fungus ◽  
Dry Weight ◽  
Soybean Seeds ◽  
Colletotrichum Truncatum ◽  
Fresh Weight ◽  
Crop Development ◽  
Physiological Quality

The fungus are the main microorganisms present in seeds, is the main cause of deterioration and loss in production. The anthracnose caused by C. truncatum associated with soybean seeds as has main vehicle for introduction into the planting areas can be detected in all stages of crop development, from the cotyledons to the end of the cycle, being present in the stems, veins, leaflets and pods. Thus aimed to evaluate the influence of using different products fungicides as seed treatment, where the seeds were inoculated with the pathogenic fungus and treated with the chemicals They take Carbedazim + Fludioxonil + metalaxyl-M and carboxin + thiram. For each fungicide product was two tramentos done using the doses recommended by the manufacturer and 75% of dose. We evaluated health, germination and promote plant (Plant growth, fresh weight and dry weight of root and shoot). This work concludes that the use of fungicide controls significantly seeds infected with C. truncatum and presents a significant improvement as the development of structures seedling.

scholarly journals Comparison of the Sub-Critical Fluid Extraction of the Essential Oil of Turmeric (Curcuma longa L.) with That of Hydrodistillation

Eng ◽  
2021 ◽  
Vol 2 (4) ◽  
pp. 608-619
Author(s):  
David Mc Gaw ◽  
Rosemarie Skeene
Keyword(s):  
Essential Oil ◽  
Curcuma Longa ◽  
Dry Weight ◽  
Weight Basis ◽  
Operating Conditions ◽  
Raw Material ◽  
Fluid Extraction ◽  
Total Extract ◽  
Pharmaceutical Properties ◽  
The Tropics

Turmeric (Curcuma longa L.) is a spice plant grown in the tropics that contains both an essential oil and an oleoresin. The essential oil is important as a flavouring and has pharmaceutical properties, while the oleoresin is bright yellow in colour and has medicinal properties. The essential oil has traditionally been extracted by hydrodistillation/steam distillation with the total extract being extracted by solvent extraction and more recently by supercritical fluid extraction (SFE). The objective of the work described in this paper was to investigate the possibility of extracting the essential oil using sub-critical fluid extraction and to compare it with hydrodistillation. The experiments using hydrodistillation showed that unpeeled fresh turmeric was the preferred raw material, giving an oil yield of ≈6% dry weight basis, which is similar to that reported in the literature. The experimental programme on the extraction of the oil from dried unpeeled turmeric was carried out over a temperature range from 25 to 30 °C and pressures from 65 to 71 bar. Yields were generally higher than hydrodistillation (up to ≈9% dry weight basis) as were the compositions of the extracted oils. The preferred operating conditions were determined to be 25 °C temperature and 65 bar pressure. Curcumin, the major component of the oleoresin, was not found in the oil, thereby demonstrating that the sub-critical extract is a pure essential oil. It is suggested that consideration be given to evaluating an SFE process whereby the essential oil is initially fully extracted under sub-critical fluid extraction conditions, after which the oleoresin is extracted separately by raising the pressure to ≈250 bar.

scholarly journals AMINO ACID COMPOSITION OF LEAVES OF THREE SPECIES OF ARTEMISIA L. GROWING IN THE ELTON REGION

2021 ◽  
pp. 219-225
Author(s):  
Галина Табаленкова
Keyword(s):  
Amino Acids ◽  
Czech Republic ◽  
Amino Acid ◽  
Dry Weight ◽  
Biologically Active ◽  
Raw Material ◽  
Buffer System ◽  
Amino Acid Analyzer ◽  
Growing Conditions ◽  
High Level

The results of studies of the qualitative composition and quantitative content of amino acids (AAs) in the leaves of three plant species of the genus Artemisia, widespread in the Elton region, were presented. Protein AAs were determined on an AAA T-339 amino acid analyzer (Czech Republic) after hydrolysis of a sample in 6N HCl at 105 °C for 24 h, free AAs – on an AAA-400 amino acid analyzer (Czech Republic) in a lithium buffer system. The protein AAs amount varied from 66 mg / g in A. lerchiana to 113 mg / g dry weight in A. santonica. 17 AAs were found in composition of these species, aspartic and glutamic acids were dominant. The content of free AAs varied from 4.4 mg / g in A. santonica to 8.3 mg / g dry weight in A. pauciflora. 14 AAs have been identified, among them proline was the predominant free AA. The share of proline was 75-81% of the total free AAs. Among the minor components, 3-4 compounds with a content above 2% dominated. The free AAs contain 3 non-proteinogenic ones (ornithine, citruline, and γ-aminobutyric acid). A. lerchiana and A. pauciflora species were similar in protein and free amino acids, probably due to the same growing conditions. A high level of free proline, together with a complex of biologically active substances in Artemisia species, which grow abundantly in the Elton region, allow to consider the possibility of their use as a medicinal raw material.

scholarly journals Heavy Metals Content in Phaeophyceae from Malang Rapat Waters, Bintan

2021 ◽  
Vol 26 (1) ◽  
pp. 57-62
Author(s):  
Hilda Novianty ◽  
Emienour Muzalina Mustafa ◽  
Suratno Suratno
Keyword(s):  
Heavy Metals ◽  
Metal Contamination ◽  
Heavy Metal Contamination ◽  
Dry Weight ◽  
Raw Material ◽  
National Agency ◽  
Brown Macroalgae ◽  
Turbinaria Conoides ◽  
Processed Products

The use of brown-macroalgae (Phaeophyceae) as an alginate source is very broad, covering the food and non-food industry, because of that it is necessary to know the safety of these natural resources, one of which is safe from heavy metal contamination. The purpose of this study was to determine heavy metals concentrations accumulated in several types of Phaeophyceae (brown macroalgae) as an alginate source from Malang Rapat waters, Bintan. The method used was descriptive non-experimental. The determination of the location of sampling was done by purposive sampling method. Samples were taken through free collection, identified species and measured of metal contamination concentrations for As, Cd, and Pb. The data obtained were analyzed descriptively. The results showed that Phaeophyceae found in Malang Rapat waters were Turbinaria conoides, Sargassum aquifolium, Padina australis, Hormophysa cuneiformis with each metal concentration contamination of As 13.95 to 23.30 µg.g-1 dry weight; Cd from 0.33 to 1.08 µg.g-1 dry weight and Pb from 4.72 to 9.92 µg.g-1 dry weight. This study showed that all metal contamination ranges in all Phaeophyceae were on the verge of the maximum limit set by the National Standardization Agency of Indonesia Indonesian (SNI) No 7387 of 2009 and National Agency of Drug and Food Control of RI (BPOM) Regulation No 5 of 2018 for dried macroalgae product so that Phaeophyceae from Malang Rapat waters - Bintan was not safe to be used as raw material for alginate source or other processed products of brown-macroalgae.

Sign in / Sign up

Export Citation Format

Share Document