Fire spreading experiments on heterogeneous fuel beds. Applications of percolation theory

2000 ◽  
Vol 30 (8) ◽  
pp. 1318-1328 ◽  
Author(s):  
Jean Nahmias ◽  
Hervé Téphany ◽  
José Duarte ◽  
Sophie Letaconnoux

In the experimental work presented here, fire spread was studied through various laboratory and full-scale models containing different types of combustible and noncombustible materials. We have examined the dynamic behaviour of the flame front and the final state (after extinction) on randomly created heterogeneous zones, both with and without wind. The principal conclusion is that critical thresholds exist, for the ratio between combustible and noncombustible parts, at the transition between nonpropagation and propagation of the fire. This result is common to all types of spreading (with or without wind). The values of the critical thresholds in the nonwind-driven experiments are those of the percolation theory. The critical exponent, obtained for wind-driven experiments, is in accordance with current values suggested by the directed percolation approach.

Fire ◽  
2021 ◽  
Vol 4 (4) ◽  
pp. 69
Author(s):  
Daryn Sagel ◽  
Kevin Speer ◽  
Scott Pokswinski ◽  
Bryan Quaife

Most wildland and prescribed fire spread occurs through ground fuels, and the rate of spread (RoS) in such environments is often summarized with empirical models that assume uniform environmental conditions and produce a unique RoS. On the other hand, representing the effects of local, small-scale variations of fuel and wind experienced in the field is challenging and, for landscape-scale models, impractical. Moreover, the level of uncertainty associated with characterizing RoS and flame dynamics in the presence of turbulent flow demonstrates the need for further understanding of fire dynamics at small scales in realistic settings. This work describes adapted computer vision techniques used to form fine-scale measurements of the spatially and temporally varying RoS in a natural setting. These algorithms are applied to infrared and visible images of a small-scale prescribed burn of a quasi-homogeneous pine needle bed under stationary wind conditions. A large number of distinct fire front displacements are then used statistically to analyze the fire spread. We find that the fine-scale forward RoS is characterized by an exponential distribution, suggesting a model for fire spread as a random process at this scale.


2020 ◽  
Vol 10 (5) ◽  
pp. 647-654
Author(s):  
Ahmed A. Alfakhry

The traditional building in Iraq characterised by the using of a certain number of finishing's in external façades like cement plastering, limestone and perforated yellow brick because the raw materials of manufacturing are available locally. Fire spread through the facades is widely recognized as one of the fastest pathways of fire spreading in the buildings, so the appropriate choose of highly performance finishing material against fire will be potentially the main factor in controlling the fire and suppressed it. This study uses computer modeling and fire simulation technology of Pyrosim, FDS and smoke view to compare the difference between the performance of some traditional finishing materials like cement plastering, limestone and perforated yellow brick with the ACPs and their speed to transfer fire from floor to floor if used in multi storey buildings. The study highlighted that traditional finishing materials are more efficient than modern cladding materials and that the performance of ACP-PE is the worst among the materials examined by this study. Moreover, the cement plastering is the worst among the traditional local finishing materials.


Author(s):  
Xiaolin Xie ◽  
Duane Boning

Die-scale models of chemical-mechanical polishing (CMP) have been previously reported for a number of different CMP processes used in integrated circuit manufacturing, including oxide, dual material shallow trench isolation, and dual material copper damascene processes. These models can dynamically predict the evolution of surface topography (e.g., local feature step heights, film thickness nonuniformity across the different pattern density regions of the chip, dishing, and erosion) for any time point during CMP. This topography evolution information can be applied to better understand the basis for observed friction and wear in the CMP process. In this work, we explore models of the macroscopic frictional force based on the surface topography. CMP endpoint measurements, such as those from motor current traces, enable verification of model predictions relating friction to CMP surface topography evolution, for different types of CMP processes and patterned chips.


Author(s):  
Koyu Satoh ◽  
Naian Liu ◽  
Qiong Liu ◽  
K. T. Yang

It is important to examine the behavior of forest fires and city fires to mitigate the property damages and victims by fires. There have been many previous studies on forest fires where the fire spreading patterns were investigated, utilizing artificial satellite pictures of forest fires, together with the use of corresponding weather data and GIS data. On the other hand, large area city fires are very scarce in the world, particularly in modern cities where high-rise concrete buildings are constructed with sufficient open spaces. Thus, the examples of city fires to be referred are few and detailed investigations of city fires are limited. However, there have still been existing old cities where traditional houses built with flammable material such as wood, maybe historically important, only separated with very small open spacing. Fires may freely spread in those cities, once a big earthquake happens there and then water supply for the fire brigade is damaged in the worst case along with the effect of strong wind. There are some fundamental differences between the forest fires and city fires, as the fuel may distribute either continuously or discretely. For instance, in forest fires, the dead fallen leaves, dry grasses and trees are distributed continuously on the ground, while the wooden houses in cities are discretely distributed with some separation of open spacing, such as roads and gardens. Therefore, the wooden houses neighboring the burning houses with some separation are heated by radiation and flames to elevate the temperatures, thus causing the ignition, and finally reaching a large city fire. The authors have studied the forest fire spread and are planning to start a laboratory experiment of city fire spreading. In the preliminary investigation, a numerical study is made to correlate with the laboratory experiment of city fire propagation, utilizing the three-dimensional CFD simulations. Based on the detailed experimental analysis, the authors are attempting to modify the three dimensional CFD code to predict the forest fires and city fires more precisely, taking into account the thermal heating and ignition processes. In this study, some fundamental information on the city fire propagation has been obtained, particularly to know the safe open spacing distances between the houses in the cities and also the wind speed.


2013 ◽  
Vol 357-360 ◽  
pp. 415-420
Author(s):  
Yun Yang ◽  
Jun Jie He ◽  
Jun Tao Yang

Aiming at the problem of fire risk of the traditional scaffold construction scheme, a new type of scaffold construction scheme was proposed. In the vertical layout of scaffold board, this scheme alternately arranged to take the "two layers of bamboo fence one layer steel fence". In order to verify the feasibility of the prevention of the spread of fire about the new scaffold construction scheme, three groups of fire experiments were designed. By the analysis of experimental phenomena and data results, it is concluded that the steel fence boards used as isolation layers in the new scaffold construction scheme can effectively mitigate the risk of fire spreading upward or downward along the burning scaffold.


Author(s):  
W. E. Lewis ◽  
M. J. Holmes

This paper describes experimental work on scale models of the intakes to gas circulators for gas-cooled reactors. One model was of a geometry suitable for the older type of reactor in which the boilers were outside the main pressure vessel while the other was associated with the more recent concrete pressure vessel concept. In both models the flow was through a complex annular bend into the blade annulus in which the flow distribution was measured. In one case the bend was axisymmetric and turned the flow through 180° from one annulus into a concentric inner one. In the other model the geometry was much more complex with flow from a near hemispherical chamber being diverted into the blade annulus by a bend of more than 90° at the top of the intake and 180° at the bottom. The tests showed that the original design of the first model gave a satisfactory performance but the other model required considerable development work.


2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
R. U. Halwatura

Urbanization related to population growth is one of the burning issues that the world is facing today. Parallel to this, there is visible evidence of a possible energy crisis in the near future. Thus, scientists have paid attention to sustainable development methods, and in the field of building construction also, several innovations have been proposed. For example, green roof concept is one of such which is considered a viable method mainly to reduce urban heat island effect, to regain lost land spaces in cities, and to increase aesthetics in cities. The present study was aimed at investigating the impact of green roofs on indoor temperature of buildings, the effect of different types of roofs on the air conditioning loads, and the life cycle cost of buildings with different types of roofing. The study was conducted in several phases: initial small-scale models to determine the heat flow characteristics of roof top soil layers with different thicknesses, a large-scale model applying the findings of the small-scale models to determine temperature fluctuations within a building with other common roofing systems, a computer simulation to investigate air conditioning loads in a typical building with cement fiber sheets and green roof slabs, a comparative analysis of the effect of traditional type roofs and green roofs on the air conditioning loads, and finally an analysis to predict the influence of traditional type roofs and green roofs on life cycle cost of the buildings. The main findings of the study were that green roofs are able to reduce the indoor temperature of buildings and are able to achieve better heat transfer through the roof, and, thus a lower cooling load is necessary for air conditioning and has the possibility of reducing life cycle cost of a building.


2007 ◽  
pp. 367-376
Author(s):  
Anders Lönnermark

Recent restrictions regarding landfills and handling of waste, have led to a new storagesituation for a number of different types of storages of waste, ranging from existing landfillsto temporary storages. This also means that new fire risks have evolved. The fires meanseveral different problems: economic losses, stop in operation (which in addition to economiceffects can affect other parties), risk for fire spread to other premises, etc. Other importantissues are health and environmental effects of waste fires.In this paper, a number of fires and fire tests involving different types of stored waste arepresented and discussed. Measured or estimated yields of emissions are presented andcompared. A series of fire tests involving electrical and electronics waste (EE waste) and usedtyres, performed in varied configurations, is described in more detail with example of resultsfrom gas analysis and analysis of runoff water. Clearly, as restrictions on emissions fromcontrolled combustion are regulated and reduced, emissions from fires will becomeincreasingly important from an environmental point of view.


Fire Safety ◽  
2021 ◽  
Vol 37 ◽  
pp. 16-23
Author(s):  
Ya. Ballo ◽  
R. Yakovchuk ◽  
V. Nizhnyk ◽  
O. Sizikov ◽  
A. Kuzyk

Purpose. The research based on FDS modeling aims to identify design parameters influence of the façade firefighting eaves at fire compartment border on the prevention of fire spreading in high-rise buildings.Methods. To calculate the temperature in high-rise building model Pyrosim computer system is used which serves as the user's shell application Fire Dynamics Simulator (FDS). This FDS system uses numerical algorithms to solve the complete Navier-Stokes differential equation system to determine the temperature and other hazardous factors during a fire.Results. This article deals with the results of using the FDS modeling to substantiate fire-fighting eaves design parameters, which are extended beyond the facade and are located at fire compartment border along the perimeter of high-rise buildings with a conventional height of more than 73.5 m. A comparative analysis of eaves' design parameters and their effect on the temperature distribution along the building facade during a possible fire was conducted. Comparative dependences of tempera-ture distribution on building facades were constructed, as well as their heating areas were determined.Scientific novelty. According to national and foreign regulations requirement analytical research and information sources on the of high-rise buildings design, fire safety requirements to the high-rise public buildings facades with a conventional height of more than 73.5 m were scientifically substantiated in terms of the requirements formation for limiting the fire spreading, smoke and building facades exterior constructions heating.Practical value. Obtained data was analyzed as a result of FDS modeling under the same reference conditions to provide a conclusion on facade fire-fighting eaves design parameters effectiveness at fire compartment border and further improvement ways of their construction and fire spread prevention in high-rise buildings.


2019 ◽  
Vol 26 (2) ◽  
pp. 22-27
Author(s):  
Ali Khalaf ◽  
Mohammed Rajab

Crude oil desalting is the first processing step in a refinery. The objectives of crude desalting are the removal of salts, solids, and the formation of water from unrefined crude oil before the crude is introduced in the crude distillation unit of the refinery. The experimental work is divided into three schemes covering the effect of surfactant dosage, test different types of surfactants, and the effect of salt content on desalting efficiency. The results show that the crude oil desalting efficiency, increased with increasing surfactant quantity., The results indicate that desalting efficiency has lowered with increasing the salt content in crude oil. Also, the results show that the best solvent was toluene, and the best mixing ratio of solvent was 10 Vol. %.


Sign in / Sign up

Export Citation Format

Share Document