scholarly journals ISOLATION AND STUDY OF THE POLYSACCHARIDE COMPLEX ISOLATED FROM AESCULUS HIPPOCASTA-NUM L.

2021 ◽  
pp. 115-122
Author(s):  
Luiza Bakhtiyarovna Azimova ◽  
Al'bina Vasil'yevna Filatova ◽  
Abbaskhan Sabirkhanovich Turaev ◽  
Djalol Turgunbaevich Djurabaev
Keyword(s):  
Microwave Radiation ◽  
Monosaccharide Composition ◽  
Analysis Data ◽  
Raw Material ◽  
Horse Chestnut ◽  
Absorption Bands ◽  
Polysaccharide Complex ◽  
Molecular Weight Characteristics ◽  
The Republic ◽  
Trimethylsilyl Derivatives

This paper presents the results of a study of the polysaccharide complex, first obtained using microwave radiation from the shells of horse chestnut seeds (Aesculus Hippocastanum L.), collected on the territory of the Tashkent region of the Republic of Uzbekistan. It is shown that the use of microwave waves makes it possible to intensify the method of obtaining polysaccharides with an increase in their yield. The yield of the obtained product reaches 13%, compared with the method of obtaining without using microwave radiation (9.85%), which indicates the prospects of using microwave radiation in the isolation of polysaccharides from this type of raw material. The molecular weight characteristics were determined, and using GC/MS analysis of trimethylsilyl derivatives, the monosaccharide composition of the complex isolated from the shells of the Semyon chestnut by alkaline extraction was established. It was found that the isolated polysaccharides consist mainly of arabinose and galactose residues (65–100%), and also, as minor monosaccharides, up to 35% of glucose, xylose, mannose, rhamnose, ribose residues. Signals and absorption bands corresponding to total polysaccharides were observed in 13C NMR and IR spectra. The NMR analysis data are consistent with the results of the analysis of the monosaccharide composition of the polysaccharide complex obtained using GC / MS. The antiradical activity of the polysaccharide complex has been established.

Neutral Lipids of Oats Fruit (Avena Sativa L.)

2020 ◽  
Vol 9 (4) ◽  
pp. 40-43
Author(s):  
N. K. Yuldasheva ◽  
S. D. Gusakova ◽  
D. Kh. Nurullaeva ◽  
N. T. Farmanova ◽  
R. P. Zakirova ◽  
...  
Keyword(s):  
Avena Sativa ◽  
Neutral Lipids ◽  
The Body ◽  
Biologically Active ◽  
Absorption Bands ◽  
Vital Functions ◽  
The Republic ◽  
Living Organisms ◽  
Main Components ◽  
Active Substances

Introduction. Lipids are a widespread group of biologically active substances in nature, making up the bulk of the organic substances of all living organisms. They accumulate in plants in seeds, as well as in fruits and perform a number of vital functions: they are the main components of cell membranes and the energy reserve for the body.Aim. Study of neutral lipids of sown oats (Avena sativa L.).Materials and methods. The objects of the study were fruits (grains) of oats of the sown variety "Tashkent 1," harvested in the Republic of Uzbekistan. Results and discussions. Neutral lipids of oat grains have been found to contain 13 fatty acids with a predominance of the sum of oleic, linolenic and linoleic acids. The total degree of unsaturation was almost 78%. Absorption bands characteristic of these substances were observed in the IR spectrum of MEGC.Conclusion. According to the results of the NL analysis, oat grains consisted of triacylglycerides and free LCDs, which were accompanied by hydrocarbons, phytosterols, triterpenoids and tocopherols.

The Research of Iron Containing Wastes Modification Process of Leninabad Rare Metals Plant

2021 ◽  
Vol 410 ◽  
pp. 778-783
Author(s):  
Pavel V. Matyukhin ◽  
Daler I. Mirzoev
Keyword(s):  
Chemical Composition ◽  
Building Materials ◽  
Raw Material ◽  
Filling Material ◽  
Rare Metals ◽  
X Ray ◽  
Modification Process ◽  
Before And After ◽  
The Republic ◽  
Enrichment Process

The paper presents the results of ferriferous wastes modification process research carried on the basis of JCS “Leninobad rare metals Plant” located in the Republic of Tajikistan. The wastes for the study were taken from the western tailing. The article presents the justification of the chosen wastes as a filling material in the development of new radiation protective composite building materials. The data on the initial ferriferous chemical composition of the tailing wastes and the chemical composition of the material that passed the enrichment process is presented. The study contains microphotos of ferriferous haematite raw material particles surface before and after completing the modifying process. The paper presents and describes the study of X-ray phase analysis diffractograms of enriched iron-containing wastes before and after the modification process. The current research proves that the enrichment ferriferous wastes particles modification process is possible and as a result it can be used as a filling for the development of new kinds of radioprotective composite materials.

scholarly journals Technogenic wastes and ecological problems

2020 ◽  
Vol 3 ◽  
pp. 61-65
Author(s):  
Anvar Aliyev ◽  
Keyword(s):  
Land Reclamation ◽  
Surface Mining ◽  
Ore Deposits ◽  
Raw Material ◽  
Historical Period ◽  
Administrative District ◽  
Technogenic Contamination ◽  
The Republic ◽  
Lesser Caucasus ◽  
Technogenic Wastes

The northeastern part of the Lesser Caucasus encompasses the western part of the Republic of Azerbaijan and is characterized with a prevalence of unique flora and fauna and the availability of rich natural resources, particularly metals. It is known that the long-term exploitation of these resources by surface mining has led to technogenic contamination in the area. Exploitation of ore deposits is associated with the origination of huge hills of waste which cause heavy degradation of pastures, forests, and croplands. A significant part of widely degraded areas in the northeastern Lesser Caucasus is found in the territory of the Gedabek administrative district. This paper deals with the problem of restoration for contaminated lands formed due to raw material extraction on territory of valuable mountain forests and meadows over a long historical period as well as the use of collected technogenic wastes for different purposes (e.g. in land reclamation, construction of motorways etc.).

scholarly journals Localization of enterprises for primary processing of milk in Almaty region

2021 ◽  
Vol 3 ◽  
pp. 13-23
Author(s):  
G.U. Akimbekova ◽  
◽  
A.B. Baymuhanov ◽  
U.R. Kaskabaev ◽  
◽  
...  
Keyword(s):  
Dairy Products ◽  
Dairy Industry ◽  
Raw Material ◽  
Agricultural Cooperatives ◽  
Milk Processing ◽  
Existing Problems ◽  
Technological Chain ◽  
The Republic ◽  
Production Capacities ◽  
Potential Reserve

The purpose-on the basis of the analysis of the current state and location of enterprises in the dairy industry of the republic and Almaty region, in particular, to identify the main factors that hinder its development, to develop recommendations for solving the existing problems. Methods - monographic, computational-constructive, analytical, economic-statistical, logical generalization. Results - research confirms the underdevelopment of the infrastructure for effective promotion of dairy products from producer to consumer along the production-processing-sale technological chain, especially primary milk processing; often there is a discrepancy between the required proportions between the existing production capacities of milk processing enterprises and the level of development of their raw material zones. Based on production potential of each district of a specific region and calculation of the population's demand for dairy products, a forecast for creation of agricultural cooperatives (APC) of dairy direction for purification of milk from mechanical impurities, cooling, storage and transportation in the context of districtsis presented. It is necessary to create 77 APC for the period 2021-2022, incl. 64 cooperatives for primary milk processing. Conclusions - it is recommended to merge small farms into agricultural cooperatives. The economic efficiency of organizing a cooperative milk collection point at the district level has been justified. Based on the study of the existing schemes for location of milk processing enterprises, proposals have been developed for the localization of new cooperative milk collection points in the territorial units of the region. Dairy industry enterprises need investments to renew their fixed assets. The authors note that the possibilities and advantages of cooperative principles and the potential reserve of agricultural cooperation are not yet fully realized.

scholarly journals ANALYSIS CONTROL SUPPLIES RAW MATERIALS TO EFFICIENCY COST, USING THE METHOD OF ECONOMIC QUANTITY ORDER AT CV. PQR

2018 ◽  
Vol 1 (01) ◽  
pp. 41
Author(s):  
Wartoyo Hadi
Keyword(s):  
Production Process ◽  
Raw Materials ◽  
Analysis Data ◽  
Raw Material ◽  
Economic Order Quantity ◽  
Economic Order ◽  
Order Quantity ◽  
Safety Stock ◽  
Reorder Point ◽  
Efficiency Cost

The purpose of the implementation of this research is to find the effectiveness of supplies raw materials, the method of analysis data used in the square is the smallest trend for planning raw materials and controling supplies use method of economic order quantity (EOQ) analyze reorder point. Analysis reorder point and safety stock. And analyzes efficiency cost of raw materials. Forecasting raw materials years 20x7 according to the smallest trend, cloth and dakron happened the difference is greater than of the target needed (according to a company); controling supplies raw materials with the methods eoq in 20x7 more effective than reservations raw materials cloth and dakron and more efficient than cost raw materials. The company should review the policy of forecasting raw material supplies that had been undertaken and make planning supplies the raw material that more accurate using the firm’s historical data and not only targeting the output production next year, so that machines production can be optimized. Considering the use of control supplies with the methods economic order quantity to companies, so this analysis can determine material reservations, supplies safety, maximum supplies to avoid the risk of running out of raw materials, because the companies often happened less dressed up a result of reservations that time is inaccurate, the lack of safety stock and the deferred the delivery of goods which often disturb the production process, by this method can prevent these things, so that the production process can run smoothly and minimize the cost of raw materials supplies.

scholarly journals PERSPECTIVES FOR DEVELOPMENT OF TECHNICAL BUILDING STONE- LIMESTONE IN THE REPUBLIC SRPSKA

2015 ◽  
Vol 1 (12) ◽  
Author(s):  
Slobodan Majstorović ◽  
Vladimir Malbašić ◽  
Miodrag Čelebić
Keyword(s):  
Raw Materials ◽  
Production Capacity ◽  
Mineral Resources ◽  
Building Stone ◽  
Raw Material ◽  
Material Base ◽  
Standard Quality ◽  
The Republic ◽  
Fragmentation Of Production ◽  
Republika Srpska

Curent situation of raw material base and study of limestone like construction stone deposits in the Republic of Serbian were relatively poorly considered during the last decades, and the main problems are the following: low production capacity fragmentation of production, needs for raw materials homogenization and delivering of standard quality, undeveloped market, the recession of the domestic economy and the economies in the region, the relatively low level of exploration by many deposits, especially lack of knowledge of the occurrence legality for certain types and quality of raw materials and lack of complete quality indicators for raw material, which sometimes causes the utilization of only the highest quality deposit parts.This paper provides an overview of active quarries in the Republic Srpska with exploitation of limestone like technical building stone and present an attempt to determine the basic quantitative and qualitative characteristics of the raw material and the current working conditions at these quarries. The purpose of such a review would be in an effort to create a clearer picture about production, market, social and other aspects of the limestone exploitation in the Republika Srpska and the realistic possibilities of maintaining and developing of these mineral resources utilization, which can certainlybe interesting for the development of many other industries in the Republic Srpska.

scholarly journals STUDY OF THE FLAVONOID COMPOSITION AND BIOLOGICAL ACTIVITY OF HAWTHORN`S LEAVES CRATAEGUS PONTICA

2021 ◽  
pp. 201-209
Author(s):  
Kamola Vakhabjanova Raimova ◽  
Nodira Gulomzhanovna Abdulladzhanova ◽  
Farrukh Nazimovich Toshpulatov ◽  
Nurali Azamovich Ergashev ◽  
Alimzhan Davlatbaevich Matchanov
Keyword(s):  
Antioxidant Activity ◽  
Raw Materials ◽  
Liver Mitochondria ◽  
Dry Mass ◽  
Polyphenolic Compounds ◽  
Raw Material ◽  
Rat Liver Mitochondria ◽  
Mountainous Regions ◽  
Flavonoid Composition ◽  
The Republic

The results of studies of the content of polyphenolic compounds and their antioxidant activity in the Pontic hawthorn plant Crataegus pontica K.Koch., growing in the mountainous regions of the Tashkent region of the Republic of Uzbekistan are presented. The collection of raw materials took place in the spring at the beginning of October 2019 and at the end of April 2020. The conditions for the isolation of polyphenolic compounds were selected under various conditions. It was shown that the optimal content of polyphenols is extracted with 70% acetone, followed by fractionation of the aqueous residue with ethyl acetate and precipitation with hexane. It was shown that in the plants harvested in spring, the amount of polyphenols was 4.28%, and the collected volume was 2.6%, of the air-dry mass of the raw material. Chromatographic methods (BC and TLC) revealed that the composition of plant leaves collected in spring contains more polyphenols than those collected in autumn. This plant contains compounds belonging to the class of flavonols, phenolic acids and flavan-3-ols. Polyphenols were identified by rutin, quercetin, quercetin-3-O-β-galactoside, catechin, and gallic acid by BC and TLC methods. The antioxidant activity of the sum of polyphenolic compounds was studied in the model of lipid peroxidation (LPO) in rat liver mitochondria. It was found that polyphenols have a protective effect on mitochondria, a reduced damaging effect of Fe2+ / ascorbate and antioxidant activity depends on the concentration of the studied polyphenolic substances. The introduction of rutin into the incubation medium in 5 μM medium inhibits LPO processes by 32.0%, and at 10 μM – by 85.9% and in 20 μM – by 96.8%, compared with the control.

scholarly journals Effect of PEEK degradation on commingled fabrics consolidation

2021 ◽  
Author(s):  
Lisa Feuillerat ◽  
Olivier De Almeida ◽  
Jean-Charles Fontanier ◽  
Fabrice Schmidt
Keyword(s):  
Melt Spinning ◽  
Molar Mass ◽  
Degradation Kinetics ◽  
Gel Permeation Chromatography ◽  
Raw Material ◽  
High Porosity ◽  
Absorption Bands ◽  
Mass Distributions ◽  
Key Factor ◽  
Lower Molar

The effects of PEEK degradation on consolidation of commingled semi-finished products have been investigated. Two commingled semi-finished products provided by two different suppliers have been studied and compared to a powdered fabric based on the same PEEK grade. Both were manufactured from aligned AS4 carbon and PEEK yarns but the first product referred as the NCF1 has a lower commingling level than the second one identified as the NCF2. Contrary to what could be expected, under the same processing conditions, consolidation of the NCF1 and the NCF2 systematically results in a high porosity content, above 10%. Fourier Transform Infrared spectrophotometry (FTIR) in ATR mode and Gel Permeation Chromatography (GPC) have shown small molecular structure modifications of PEEK yarns compared to the raw material, such as a shift of molar mass distributions towards lower molar mass and the appearance of C-H absorption bands attributed to non-aromatic alkanes. These modifications have been attributed to sizing of PEEK filament. Calorimetric (DSC) and rheological analyses have demonstrated that the presence of sizing in the semi-finished products have huge consequences on the degradation kinetics. The crystallization temperature decreases and the viscosity increases significantly. This acceleration of the degradation kinetics is the reason of the poor consolidation behavior during composite manufacturing. The conditions of melt spinning extrusion under which the neat PEEK is transformed into filament are therefore a key factor of PEEK degradation.

scholarly journals LUNG CANCER - STATISTICAL ANALYSIS DATA IN A 5 YEAR PERIOD IN BITOLA, REPUBLIC OF NORTH MACEDONIA

2020 ◽  
Vol 8 (2) ◽  
pp. 108-117
Author(s):  
Jihe Zhu ◽  
Blagica Arsovska ◽  
Kristina Kozovska
Keyword(s):  
Public Health ◽  
Lung Cancer ◽  
Analysis Data ◽  
Malignant Cells ◽  
Female Population ◽  
Female Patients ◽  
The World ◽  
Pulmonary Parenchyma ◽  
Male Patients ◽  
The Republic

Lung cancer is one of the most common and deadly malignancies in the world, which is characterized by uncontrolled division and growth of malignant cells in the pulmonary parenchyma. For the purposes of this paper was used data from the clinical hospital “Dr. Trifun Panovski'' in the Municipality of Bitola, Republic of North Macedonia  in the period of 2015-2019. The results show that the most of the cases are male with the leading age of about 55-64 years. However, the disease is becoming more common in the female population at a later age. Regarding the number of male patients treated in the Municipality of Bitola, it can be noted that the highest number of male patients was in 2018, and the lowest in 2017. Most female patients were treated in 2016 and the least in 2018. From the analysis of the Institute of Public Health, the highest number of male deaths in Bitola occurred in 2014 and the lowest in 2015 and 2018, among female patients, the highest number of deaths was in 2014, but the lowest in 2018. Death outcomes in Bitola represent about 6-7% of total number of deaths in the Republic of North Macedonia.

scholarly journals CALCULATION OF PRODUCTION COST IN UD. USAHA BARU WITH FULL COSTING METHOD

2019 ◽  
Vol 4 (1) ◽  
pp. 28-42
Author(s):  
Suprianto Suprianto ◽  
Bina Andari ◽  
Yely Sulistyawati
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Analysis Data ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Other Information ◽  
Cost Of Production ◽  
The Cost

This study aims to evaluate the calculation of cost of production. The accuracy of the calculation of cost of production is influenced by the suitability in the accumulation and calculation of production costs which includes the cost of raw materials, direct labor costs and other costs (factory overhead costs). This research was conducted at UKM UD. Usaha Baru which aims to determine the calculation of cost of production at UD. Usaha Baru and to find out whether the calculation of cost of production is in accordance with the full costing method. The technique (method) of data analysis used in this study is quantitative analysis. Data collection techniques use interview techniques directly to obtain information from the number of units of monthly production, raw material costs, direct labor costs, and factory overhead costs, as well as other information relating to the calculation of cost of production. Based on the evaluation results for the calculation of raw material costs and labor costs are in accordance with the full costing method. However, the calculation of factory overhead costs is not in accordance with the full costing method because there are costs that have not been included in the calculation of production costs.

Sign in / Sign up

Export Citation Format

Share Document