scholarly journals Antibacterial Activity and Impact of Different Antiseptics on Biofilm-Contaminated Implant Surfaces

2019 ◽  
Vol 9 (24) ◽  
pp. 5467
Author(s):  
Marco Lollobrigida ◽  
Simone Filardo ◽  
Rosa Sessa ◽  
Marisa Di Pietro ◽  
Giuseppina Bozzuto ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Sodium Hypochlorite ◽  
Spectroscopic Analysis ◽  
Chemical Properties ◽  
Bacterial Count ◽  
Sem Analysis ◽  
Liquid Sodium ◽  
Chemical Agent ◽  
Implant Surface ◽  
Sterile Saline

Several antiseptic agents have been proposed for the treatment of peri-implantitis as a complementary therapeutic strategy in addition to mechanical devices. The aim of this study was to compare six different antiseptics, as well as alternative formulations of the same chemical agent, with respect to their decontamination efficacy and impact on chemical properties of the implant surface. Titanium disks with a micro-rough surface, previously contaminated with Porphyromonas gingivalis and Streptococcus mutans biofilms, were treated for 2 min with different antiseptics (liquid sodium hypochlorite 5.25%, gel sodium hypochlorite 5.25%, liquid chlorhexidine 0.2%, gel chlorhexidine 1%, gel citric acid 40%, and gel orthophosphoric acid 37%) or sterile saline solution (control) and their antibacterial activity as well as their ability to remove biofilm were assessed by viable bacterial count and scanning electron microscopy, respectively. Spectroscopic analysis was also performed on non-contaminated disks after exposure to the antiseptics, in order to detect any change in the elemental composition of the titanium surface. All the antimicrobial formulations examined were effective against P. gingivalis and S. mutans biofilms. SEM analysis revealed however that liquid sodium hypochlorite 5.25% was more effective in dissolving biofilm residues. Spectroscopic analysis detected traces of the antiseptics, probably due to insufficient rinsing of the titanium surfaces. In conclusion, since gel formulations of these antiseptic agents possessed a similar antibacterial activity to the liquid formulations, these may be proposed as alternative treatments given their properties to avoid overflows and increase contact time without significant side effects on the bone.

scholarly journals Multidisciplinary Studies of Folk Medicine “Five Thieves’ Oil” (Olejek Pięciu Złodziei) Components

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2931
Author(s):  
Przemysław Siejak ◽  
Wojciech Smułek ◽  
Farahnaz Fathordobady ◽  
Anna Grygier ◽  
Hanna Maria Baranowska ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Membrane Permeability ◽  
Significant Contribution ◽  
Spectroscopic Analysis ◽  
Folk Medicine ◽  
Cell Activity ◽  
Biological Properties ◽  
Cell Membrane Permeability ◽  
Comparable Activity ◽  
Terpene Derivatives

To meet the growing interest in natural antibacterial agents, we evaluated the physicochemical and biological properties of the folk medicine known as “five thieves’ oil” (Polish name: olejek pięciu złodziei). Five thieves’ oil consists of a mixture of five oils: rosemary, lemon, clove, eucalyptus, and cinnamon. In this study, we performed gas chromatography, FTIR, and UV–vis spectroscopic analysis, as well as L-a-b color tests, contact angle determination, and surface tension determination. To verify its antibacterial activity, the metabolic activity and changes in cell membrane permeability of bacteria of the genus Pseudomonas were studied. As a result, it was found that among the constituent oils, the oils of clove and cinnamon were the least volatile and, at the same time, had the strongest antibacterial activity. However, a mix of all the oils also showed comparable activity, which was even more pronounced for the oils after 4 weeks of aging. This effect can be linked to the high content of terpene derivatives such as eugenol and cinnamaldehyde, which can cause changes in bacterial membrane permeability, affecting cell activity and survival. This study is the first to characterize the constituents of the popular folk medicine five thieves’ oil, confirming and explaining its strong antibacterial activity, thus constituting a significant contribution to contemporary health education.

The Effect of Bleach Liquid and Household Cleaner on Surface Hardness and Roughness of Acrylic Base of Orthodontic Appliances

2021 ◽  
Author(s):  
Saeed Noorollahian ◽  
Farinaz Shirban ◽  
Vahid Mojiri
Keyword(s):  
Surface Roughness ◽  
Hydrochloric Acid ◽  
Sodium Hypochlorite ◽  
Surface Hardness ◽  
Acrylic Resin ◽  
Liquid Sodium ◽  
P Value ◽  
Orthodontic Appliances ◽  
Acrylic Resins ◽  
Significant Difference

Introduction: The daily use of orthodontic removable plates can interfere with the self-cleansing function of the mouth. Although various techniques have been proposed for cleaning removable orthodontic appliances, there is no consensus on the use of a safe method that preserves the physical properties of the appliance. This study aimed to investigate the effect of using hydrochloric acid (10%, for removal of mineral deposits) and sodium hypochlorite (5.25%, to remove organic matter and discolorations) on surface hardness and roughness of self-cure orthodontic acrylic resins. Materials & Methods: This cross-sectional laboratory study was conducted in the fall of 2017 at Isfahan University of Medical science and Isfahan University of Technology. In this study two orthodontic acrylic resins (Orthocryl® and Acropars®) were used. Eighty samples (12×10×3 mm) from each one were fabricated and divided into four groups (n = 20). Group 1: 15 minutes immersion in household cleaner liquid (Hydrochloric acid, 10%) followed by15 minutes immersion in household bleach liquid (Sodium Hypochlorite, 5.25%). In group 2, immersions were repeated just like group two times and in group 3, were done three times. Group 4 was as control and had no immersion. The surface hardness and roughness of samples were measured. Data were analyzed with Two Way ANOVA and the significance level was set at 0.05. Results: The number of immersion procedures did not significantly affect the surface hardness (p value = 0.958) and surface roughness (p value = 0.657) in the different study groups. There was no significant difference in the surface hardness between the two acrylic resin brands (p value = 0.077); however, Acropars acrylic resin samples exhibited significantly higher surface roughness compared to the Orthocryl acrylic resin samples(p value < 0.001). Conclusion: 15 minutes of immersion in 10% HCl, followed by 15 minutes of immersion in 5.25% NaOCl and repetition of the procedure three times did not significantly affect the surface hardness and roughness of self-cured acrylic resins.

scholarly journals Antimicrobial Peptides Epinecidin-1 and Beta-Defesin-3 Are Effective against a Broad Spectrum of Antibiotic-Resistant Bacterial Isolates and Increase Survival Rate in Experimental Sepsis

Antibiotics ◽  
2022 ◽  
Vol 11 (1) ◽  
pp. 76
Author(s):  
Albert Bolatchiev
Keyword(s):  
Antibacterial Activity ◽  
Survival Rate ◽  
Antimicrobial Peptides ◽  
Lethal Dose ◽  
Experimental Models ◽  
Experimental Sepsis ◽  
Epinephelus Coioides ◽  
Sterile Saline

The antimicrobial peptides human Beta-defensin-3 (hBD-3) and Epinecidin-1 (Epi-1; by Epinephelus coioides) could be a promising tool to develop novel antibacterials to combat antibiotic resistance. The antibacterial activity of Epi-1 + vancomycin against methicillin-resistant Staphylococcus aureus (22 isolates) and Epi-1 + hBD-3 against carbapenem-resistant isolates of Klebsiella pneumoniae (n = 23), Klebsiella aerogenes (n = 17), Acinetobacter baumannii (n = 9), and Pseudomonas aeruginosa (n = 13) was studied in vitro. To evaluate the in vivo efficacy of hBD-3 and Epi-1, ICR (CD-1) mice were injected intraperitoneally with a lethal dose of K. pneumoniae or P. aeruginosa. The animals received a single injection of either sterile saline, hBD-3 monotherapy, meropenem monotherapy, hBD-3 + meropenem, or hBD-3 + Epi-1. Studied peptides showed antibacterial activity in vitro against all studied clinical isolates in a concentration of 2 to 32 mg/L. In both experimental models of murine sepsis, an increase in survival rate was seen with hBD-3 monotherapy, hBD-3 + meropenem, and hBD-3 + Epi-1. For K. pneumoniae-sepsis, hBD-3 was shown to be a promising option in overcoming the resistance of Klebsiella spp. to carbapenems, though more research is needed. In the P. aeruginosa-sepsis model, the addition of Epi-1 to hBD-3 was found to have a slightly reduced mortality rate compared to hBD-3 monotherapy.

scholarly journals Evaluation of the performance of encapsulated lifting system composting technology with a GORE(R) cover membrane: Physico-chemical properties and spectroscopic analysis

2019 ◽  
Vol 25 (3) ◽  
pp. 299-308
Author(s):  
Mutaz Al-Alawi ◽  
Loubna El Fels ◽  
Ramadan Benjreid ◽  
Tamas Szegi ◽  
Mohamed Hafidi ◽  
...  
Keyword(s):  
Spectroscopic Analysis ◽  
Chemical Properties ◽  
Physico Chemical ◽  
Lifting System

Antibacterial Activity of Nickel -Doped ZnO\MWCNTs hybrid Prepared by Sol-Gel technique

2021 ◽  
Author(s):  
Selma M.H. AL-Jawad ◽  
Zahraa S. Shakir ◽  
Duha S. Ahmed
Keyword(s):  
Antibacterial Activity ◽  
Sol Gel ◽  
Inhibition Zone ◽  
Sem Analysis ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Zno Nps ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Doped Zno

ZnO/MWCNTs hybrid and doped with different concentration of Nickel element prepared by using Sol-gel been technique reported. All samples were prepared and characterized by X-Ray Diffraction Analysis (XRD), Energy Dispersive X-ray Spectroscopy (EDS), Fourier-Transform Infrared Spectroscopy (FTIR), Field-Emission Scanning Electron Microscopy (FE-SEM), and UV-Vis spectroscopy have been identified the structural, optical and morphological properties. X-ray diffraction showed the polycrystalline nature with hexagonal wutzite structure of hybrid and doped with Nickel. The crystalline size of the hybrid nanostructure was increasing from 23.73 nm to 34.59 nm. Besides, the UV-Vis spectroscopy showed a significant decrease in the band gap values from 2.97 eV to 2.01 eV. Whereas the FE-SEM analysis confirm the formation spherical shapes of ZnO NPs deposited on cylindrical tubes representing the MWCNTs. The antibacterial activity reveals that the inhibition zone of Ni doped-ZnO/MWCNTs hybrid was 28.5 mm, 26.5 mm toward E. coli and S. aureus bacteria, respectively.

Fracture Failure Analysis of Φ50.8mm Coiled Tubing

2020 ◽  
Vol 993 ◽  
pp. 1235-1241
Author(s):  
Na Li ◽  
Li Xia Zhu ◽  
Shen Cong ◽  
Yao Rong Feng
Keyword(s):  
Fatigue Fracture ◽  
Chemical Properties ◽  
Source Area ◽  
Sem Analysis ◽  
Fracture Failure ◽  
Coiled Tubing ◽  
Micro Cracks ◽  
Macroscopic Observation ◽  
Physical And Chemical ◽  
And Chemical Properties

The fractured coiled tubing of TS90 steel grade Φ50.8 mm ×3.96 mm in a certain oilfield was analyzed through macroscopic observation, magnetic powder inspection, physical and chemical properties testing, microstructure analysis and SEM analysis. The results showed that the coiled tubing fracture belonged to fatigue fracture and the fatigue crack originated from the area of cyclic friction on the outer surface of the tubing. The cyclic axial plastic stress of the tubing in service caused micro-cracks in the source area and finally led to fatigue fracture failure of the tubing.

scholarly journals Q-Switch Nd:YAG Laser-Assisted Decontamination of Implant Surface

2019 ◽  
Vol 7 (4) ◽  
pp. 99 ◽  
Author(s):  
Namour ◽  
El Mobadder ◽  
Magnin ◽  
Peremans ◽  
Verspecht ◽  
...  
Keyword(s):  
Pulse Duration ◽  
Nd:Yag Laser ◽  
Yttrium Aluminum Garnet ◽  
Short Pulse ◽  
Sem Analysis ◽  
P Value ◽  
Implant Surface ◽  
Contact Mode ◽  
Short Pulse Duration ◽  
Clean Contaminated

Peri-implantitis (PI) is an inflammatory disease of peri-implant tissues, it represents the most frequent complication of dental implants. Evidence revealed that microorganisms play the chief role in causing PI. The purpose of our study is to evaluate the cleaning of contaminated dental implant surfaces by means of the Q-switch Nd:YAG (Neodymium-doped Yttrium Aluminum Garnet) laser and an increase in temperature at lased implant surfaces during the cleaning process. Seventy-eight implants (titanium grade 4) were used (Euroteknika, Sallanches, France). Thirty-six sterile implants and forty-two contaminated implants were collected from failed clinical implants for different reasons, independent from the study. Thirty-six contaminated implants were partially irradiated by Q-switch Nd:YAG laser (1064 nm). Six other contaminated implants were used for temperature rise evaluation. All laser irradiations were calibrated by means of a powermetter in order to evaluate the effective delivered energy. The irradiation conditions delivered per pulse on the target were effectively: energy density per pulse of 0.597 J/cm2, pick powers density of 56 mW/cm2, 270 mW per pulse with a spot diameter of 2.4 mm, and with repetition rate of 10 Hz for pulse duration of 6 ns. Irradiation was performed during a total time of 2 s in a non-contact mode at a distance of 0.5 mm from implant surfaces. The parameters were chosen according to the results of a theoretical modeling calculation of the Nd:YAG laser fluency on implant surface. Evaluation of contaminants removal showed that the cleaning of the irradiated implant surfaces was statistically similar to those of sterile implants (p-value ≤ 0.05). SEM analysis confirmed that our parameters did not alter the lased surfaces. The increase in temperature generated at lased implant surfaces during cleaning was below 1 °C. According to our findings, Q-switch Nd:YAG laser with short pulse duration in nanoseconds is able to significantly clean contaminated implant surfaces. Irradiation parameters used in our study can be considered safe for periodontal tissue.

scholarly journals Dental Sealant Empowered by 1,3,5-Tri Acryloyl Hexahydro-1,3,5-Triazine and α-Tricalcium Phosphate for Anti-Caries Application

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 895 ◽  
Author(s):  
Juliana Caletti Monteiro ◽  
Michele Stürmer ◽  
Isadora Martini Garcia ◽  
Mary Anne Melo ◽  
Salvatore Sauro ◽  
...  
Keyword(s):  
Contact Angle ◽  
Antibacterial Activity ◽  
Streptococcus Mutans ◽  
Tricalcium Phosphate ◽  
Calcium Phosphates ◽  
Dental Materials ◽  
Antibacterial Properties ◽  
Chemical Properties ◽  
Knoop Hardness ◽  
Dental Sealant

: Quaternary ammonium compounds and calcium phosphates have been incorporated into dental materials to enhance their biointeractivity and preventive effects. This study aimed at evaluating the physical and chemical properties and effects against Streptococcus mutans of a dental sealant containing 1,3,5-tri acryloyl hexahydro-1,3,5-triazine (TAT) and α-tricalcium phosphate (α‐TCP). A methacrylate-based dental sealant was initially formulated. α‐TCP and TAT (Gα-TCPTAT) were added to the experimental sealant at 2 wt.% each. One group was formulated without α‐TCP and TAT and used as control (GCTRL). All tested resins were analyzed for polymerization kinetics and degree of conversion (DC %), Knoop hardness (KHN), softening in solvent (∆KHN%), ultimate tensile strength (UTS), the contact angle with water or with α-bromonaphthalene, surface free energy (SFE) and antibacterial activity against Streptococcus mutans in biofilm and in planktonic cells. The polymerization kinetic was different between groups, but without statistical differences in the DC % (p<0.05). KHN and ΔKHN% did not change between groups (p>0.05), but Gα-TCPTAT presented greater UTS compared to GCTRL (p<0.05). No differences were found for contact angle (p>0.05) or SFE (p>0.05). Gα-TCPTAT showed greater antibacterial activity in comparison to GCTRL (p<0.05). The formulation of dental sealants containing TAT and α-TCP can be characterized by improved mechanical and antibacterial properties.

Comparative study of microbiological, chemical and sensory properties of kefirs produced in Estonia, Latvia and Lithuania

2016 ◽  
Vol 83 (1) ◽  
pp. 89-95 ◽  
Author(s):  
Dea Anton ◽  
Piret Raudsepp ◽  
Mati Roasto ◽  
Kadrin Meremäe ◽  
Sirje Kuusik ◽  
...  
Keyword(s):  
High Performance ◽  
Ion Trap ◽  
Chemical Properties ◽  
Principal Component ◽  
Bacterial Count ◽  
Starter Cultures ◽  
Oxidation Products ◽  
Total Bacterial Count ◽  
Codex Standard ◽  
Primary Oxidation

In the current study the microbiological, sensory and chemical properties of 24 kefirs (12 producers) from Estonian, Latvian and Lithuanian retail market were determined using gas chromatography (GC), high performance liquid chromatography (HPLC-MS/MS-Q-TOF and LC-ion trap MS/MS), spectrophotometry and other methods. Antihypertensive, angiotensin-converting enzyme (ACE) inhibiting, antioxidant and antibacterial peptides were found in the kefir samples. According to the results of principal component analysis of 200 most abundant compounds obtained with HPLC-MS/MS-Q-TOF analysis, Estonian kefirs differed from the rest. Kefirs of Latvian and Lithuanian origin showed similarities in several characteristics, probably related to the starter cultures and technological processes. The fatty acids composition of all Baltic kefirs was uniform. The antioxidant capacity of the kefirs varied slightly, whereas intermediate positive correlation (r= 0·32,P< 0·05) was found between antioxidativity and total bacterial count. The lipid oxidation level, estimated as the content of linoleic and oleic acid primary oxidation products, oxylipins, was very low in all studied kefirs. Only one third of analysed kefirs met the requirements of the minimum sum of viable microorganisms, indicated in the Codex Standard for Fermented Milks.

scholarly journals Agro-residues and weed biomass as a source bioenergy: Implications for sustainable management and valorization of low-value biowastes

2019 ◽  
Vol 8 (3) ◽  
pp. 243-251 ◽  
Author(s):  
Utsab Deb ◽  
Nilutpal Bhuyan ◽  
Satya Sundar Bhattacharya ◽  
Rupam Kataki
Keyword(s):  
Chemical Properties ◽  
Calorific Value ◽  
Sem Analysis ◽  
Paddy Straw ◽  
Energy Product ◽  
Content Ratio ◽  
Physico Chemical ◽  
Biomass Resources ◽  
The Face ◽  
Noxious Weed

Biomass resources are gaining increasing importance world over due to their ease of conversion to various energy product in the face of depleting fossil fuel store and increasing environmental concerns over their use. The present work elucidates different physico-chemical properties of three biomasses, paddy straw (PS)- an agricultural residue, spent paddy straw obtained after mushroom cultivation (SS), and a noxious weed (Parthenium hysterophorus; PR) to understand their properties and to explore the feasibility of using them as feedstocks in different biomass to bioenergy conversion routes. In addition to physico-chemical analysis, biochemical analysis of these biomasses along with XRD, thermogravimetric analysis, FTIR and SEM analysis have been carried out. Present study suggests that PS is a better choice as feedstock compared to both PR and SS. The calorific value to ash content ratio is more in PS (1.13) as compared to PR (1.06) and SS (0.84). Thus, it may be inferred that the biomasses in question are at par with commonly used bio-energy feedstocks like sugarcane bagasse and corn cob. ©2019. CBIORE-IJRED. All rights reserved

Sign in / Sign up

Export Citation Format

Share Document