scholarly journals Energy-Saving Inertial Drive for Dual-Frequency Excitation of Vibrating Machines

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 71
Author(s):  
Volodymyr Gursky ◽  
Igor Kuzio ◽  
Pavlo Krot ◽  
Radoslaw Zimroz
Keyword(s):  
Energy Saving ◽  
Large Scale ◽  
Bulk Material ◽  
Spectral Composition ◽  
Rotation Frequency ◽  
Element Model ◽  
Single Frequency ◽  
Dual Frequency ◽  
Higher Harmonics ◽  
Strength Capacity

The low energy efficiency and excessive power of electric motors of large-scale vibrating machines for processing bulk materials motivated a new design of the inertial drive. This drive consists of one motor and two coaxial unbalanced masses, whose rotational frequencies are related in the ratio 2:1. This approach allows for a generation of the excitation force with variable amplitude and frequency, which changes depending on the inertial characteristics and shaft rotation frequency and does not relate to the phase difference of the unbalanced masses. Because of this, the symmetry axis of the resulting vector hodograph can be changed. The spectral composition of the exciting force up to 200 Hz contains higher harmonics, the energy share of which is 25.4% from the 2nd harmonic and 14.1% from the 3rd and higher harmonics that correspondingly improves bulk material treatment in comparison to single-frequency vibrators. The finite element model is used for checking the strength capacity of the most loaded units of a dual-frequency drive. Its use allows the realization of complex trajectories of motion that are more technologically efficient for variable parameters of the treated media and energy saving in sieving screens and other vibrating machines.

scholarly journals A Novel Dual-Band Conformal Surface Plasmons Waveguide With Tunable Frequency Response In Large-scale

2021 ◽  
Author(s):  
Yijiao Fang ◽  
Jiangwei Zhong
Keyword(s):  
Surface Plasmons ◽  
Fundamental Mode ◽  
Large Scale ◽  
Dual Band ◽  
Single Frequency ◽  
Dual Frequency ◽  
Microwave Frequencies ◽  
Frequency Tunability ◽  
Tunable Frequency ◽  
Almost All

Abstract A novel dual-band conformal surface plasmons (CSPs) waveguide is designed and well studied in this paper. In earlier researches, we have recognized that electromagnetic field of CSPs waveguide are always confined to a sub-wavelength area and have a strong potential to be applied in devices designing. However, almost all of the earlier CSP structures is mainly focus on the fundamental mode characteristics with only single resonance frequency. Here we propose a innovative dual inverted-L structure with excellent performance not only on the fundamental mode but also on a new upper mode. This structure operates in microwave frequencies regime and shows outstanding frequency tunability characteristic. Being different from frequency characteristics in the earlier CSP waveguides which always used to be designed single-frequency device, dual-frequency tunability can be obtained via the dual L-type bending branch of the periodical CSP structure. In present paper, we also realize a tunable dual-frequency filter by changing the scaling factor of inverted-L stubs.

scholarly journals Vibration characteristics of triple-gear-rotor system in compressed air energy storage under variable torque load

2021 ◽  
Vol 104 (1) ◽  
pp. 003685042098705
Author(s):  
Xinran Wang ◽  
Yangli Zhu ◽  
Wen Li ◽  
Dongxu Hu ◽  
Xuehui Zhang ◽  
...  
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Element Model ◽  
Rotor System ◽  
Dynamic Responses ◽  
System Response ◽  
Rotating Speed ◽  
Torque Load ◽  
Set Up ◽  
Two Stages

This paper focuses on the effects of the off-design operation of CAES on the dynamic characteristics of the triple-gear-rotor system. A finite element model of the system is set up with unbalanced excitations, torque load excitations, and backlash which lead to variations of tooth contact status. An experiment is carried out to verify the accuracy of the mathematical model. The results show that when the system is subjected to large-scale torque load lifting at a high rotating speed, it has two stages of relatively strong periodicity when the torque load is light, and of chaotic when the torque load is heavy, with the transition between the two states being relatively quick and violent. The analysis of the three-dimensional acceleration spectrum and the meshing force shows that the variation in the meshing state and the fluctuation of the meshing force is the basic reasons for the variation in the system response with the torque load. In addition, the three rotors in the triple-gear-rotor system studied show a strong similarity in the meshing states and meshing force fluctuations, which result in the similarity in the dynamic responses of the three rotors.

scholarly journals A Dual Frequency Ultrasonic Cleaning Tank Developed by Transient Dynamic Analysis

2021 ◽  
Vol 11 (2) ◽  
pp. 699
Author(s):  
Worapol Tangsopa ◽  
Jatuporn Thongsri
Keyword(s):  
High Performance ◽  
Acoustic Pressure ◽  
Single Frequency ◽  
Response Analysis ◽  
Dual Frequency ◽  
Transient Dynamic Analysis ◽  
Ultrasonic Cleaning ◽  
Calculational Method ◽  
Successful Design ◽  
Harmonic Response Analysis

At present, development of manufacturer’s ultrasonic cleaning tank (UCT) to match the requirements from consumers usually relies on computer simulation based on harmonic response analysis (HRA). However, this technique can only be used with single-frequency UCT. For dual frequency, the manufacturer used information from empirical experiment alongside trial-and-error methods to develop prototypes, resulting in the UCT that may not be fully efficient. Thus, lack of such a proper calculational method to develop the dual frequency UCT was a problem that greatly impacted the manufacturers and consumers. To resolve this problem, we proposed a new model of simulation using transient dynamics analysis (TDA) which was successfully applied to develop the prototype of dual frequency UCT, 400 W, 18 L in capacity, eight horn transducers, 28 and 40 kHz frequencies for manufacturing. The TDA can indicate the acoustic pressure at all positions inside the UCT in transient states from the start to the states ready for proper cleaning. The calculation also reveals the correlation between the positions of acoustic pressure and the placement positions of transducers and frequencies. In comparison with the HRA at 28 kHz UCT, this TDA yielded the results more accurately than the HRA simulation, comparing to the experiments. Furthermore, the TDA can also be applied to the multifrequency UCTs as well. In this article, the step-by-step development of methodology was reported. Finally, this simulation can lead to the successful design of the high-performance dual frequencies UCT for the manufacturers.

scholarly journals Coherent suppression of backscattering in optical microresonators

2020 ◽  
Vol 9 (1) ◽  
Author(s):  
Andreas Ø. Svela ◽  
Jonathan M. Silver ◽  
Leonardo Del Bino ◽  
Shuangyou Zhang ◽  
Michael T. M. Woodley ◽  
...  
Keyword(s):  
Quality Factor ◽  
Bulk Material ◽  
Near Field ◽  
High Quality Factor ◽  
Dual Frequency ◽  
High Quality ◽  
Frequency Combs ◽  
Optical Microresonators ◽  
Whispering Gallery ◽  
The Stability

AbstractAs light propagates along a waveguide, a fraction of the field can be reflected by Rayleigh scatterers. In high-quality-factor whispering-gallery-mode microresonators, this intrinsic backscattering is primarily caused by either surface or bulk material imperfections. For several types of microresonator-based experiments and applications, minimal backscattering in the cavity is of critical importance, and thus, the ability to suppress backscattering is essential. We demonstrate that the introduction of an additional scatterer into the near field of a high-quality-factor microresonator can coherently suppress the amount of backscattering in the microresonator by more than 30 dB. The method relies on controlling the scatterer position such that the intrinsic and scatterer-induced backpropagating fields destructively interfere. This technique is useful in microresonator applications where backscattering is currently limiting the performance of devices, such as ring-laser gyroscopes and dual frequency combs, which both suffer from injection locking. Moreover, these findings are of interest for integrated photonic circuits in which back reflections could negatively impact the stability of laser sources or other components.

scholarly journals Precise Point Positioning Using Dual-Frequency GNSS Observations on Smartphone

Sensors ◽  
2019 ◽  
Vol 19 (9) ◽  
pp. 2189 ◽  
Author(s):  
Qiong Wu ◽  
Mengfei Sun ◽  
Changjie Zhou ◽  
Peng Zhang
Keyword(s):  
Precise Point Positioning ◽  
Frequency Mode ◽  
Single Frequency ◽  
Dual Frequency ◽  
Static Mode ◽  
Position Errors ◽  
Point Positioning ◽  
Similar Accuracy ◽  
Positioning Algorithm ◽  
Gnss Observations

The update of the Android system and the emergence of the dual-frequency GNSS chips enable smartphones to acquire dual-frequency GNSS observations. In this paper, the GPS L1/L5 and Galileo E1/E5a dual-frequency PPP (precise point positioning) algorithm based on RTKLIB and GAMP was applied to analyze the positioning performance of the Xiaomi Mi 8 dual-frequency smartphone in static and kinematic modes. The results showed that in the static mode, the RMS position errors of the dual-frequency smartphone PPP solutions in the E, N, and U directions were 21.8 cm, 4.1 cm, and 11.0 cm, respectively, after convergence to 1 m within 102 min. The PPP of dual-frequency smartphone showed similar accuracy with geodetic receiver in single-frequency mode, while geodetic receiver in dual-frequency mode has higher accuracy. In the kinematic mode, the positioning track of the smartphone dual-frequency data had severe fluctuations, the positioning tracks derived from the smartphone and the geodetic receiver showed approximately difference of 3–5 m.

scholarly journals A Robust Dual-Frequency Radar Profiling Algorithm

2011 ◽  
Vol 50 (7) ◽  
pp. 1543-1557 ◽  
Author(s):  
Mircea Grecu ◽  
Lin Tian ◽  
William S. Olson ◽  
Simone Tanelli
Keyword(s):  
Synthetic Data ◽  
Optimization Procedure ◽  
Correction Method ◽  
Single Frequency ◽  
Retrieval Algorithm ◽  
Dual Frequency ◽  
Ka Band ◽  
Radar Observations ◽  
Distribution Shape ◽  
Ku Band

AbstractIn this study, an algorithm to retrieve precipitation from spaceborne dual-frequency (13.8 and 35.6 GHz, or Ku/Ka band) radar observations is formulated and investigated. Such algorithms will be of paramount importance in deriving radar-based and combined radar–radiometer precipitation estimates from observations provided by the forthcoming NASA Global Precipitation Measurement (GPM) mission. In GPM, dual-frequency Ku-/Ka-band radar observations will be available only within a narrow swath (approximately one-half of the width of the Ku-band radar swath) over the earth’s surface. Therefore, a particular challenge is to develop a flexible radar retrieval algorithm that can be used to derive physically consistent precipitation profile estimates across the radar swath irrespective of the availability of Ka-band radar observations at any specific location inside that swath, in other words, an algorithm capable of exploiting the information provided by dual-frequency measurements but robust in the absence of Ka-band channel. In the present study, a unified, robust precipitation retrieval algorithm able to interpret either Ku-only or dual-frequency Ku-/Ka-band radar observations in a manner consistent with the information content of the observations is formulated. The formulation is based on 1) a generalized Hitschfeld–Bordan attenuation correction method that yields generic Ku-only precipitation profile estimates and 2) an optimization procedure that adjusts the Ku-band estimates to be physically consistent with coincident Ka-band reflectivity observations and surface reference technique–based path-integrated attenuation estimates at both Ku and Ka bands. The algorithm is investigated using synthetic and actual airborne radar observations collected in the NASA Tropical Composition, Cloud, and Climate Coupling (TC4) campaign. In the synthetic data investigation, the dual-frequency algorithm performed significantly better than a single-frequency algorithm; dual-frequency estimates, however, are still sensitive to various assumptions such as the particle size distribution shape, vertical and cloud water distributions, and scattering properties of the ice-phase precipitation.

scholarly journals Validation of GPM Rainfall and Drop Size Distribution Products through Disdrometers in Italy

2021 ◽  
Vol 13 (11) ◽  
pp. 2081
Author(s):  
Elisa Adirosi ◽  
Mario Montopoli ◽  
Alessandro Bracci ◽  
Federico Porcù ◽  
Vincenzo Capozzi ◽  
...  
Keyword(s):  
Size Distribution ◽  
Drop Size ◽  
Global Scale ◽  
Drop Size Distribution ◽  
Single Frequency ◽  
Dual Frequency ◽  
Near Surface ◽  
Active Sensor ◽  
Long Time ◽  
Global Precipitation

The high relevance of satellites for collecting information regarding precipitation at global scale implies the need of a continuous validation of satellite products to ensure good data quality over time and to provide feedback for updating and improving retrieval algorithms. However, validating satellite products using measurements collected by sensors at ground is still a challenging task. To date, the Dual-frequency Precipitation Radar (DPR) aboard the Core Satellite of the Global Precipitation Measurement (GPM) mission is the only active sensor able to provide, at global scale, vertical profiles of rainfall rate, radar reflectivity, and Drop Size Distribution (DSD) parameters from space. In this study, we compare near surface GPM retrievals with long time series of measurements collected by seven laser disdrometers in Italy since the launch of the GPM mission. The comparison shows limited differences in the performances of the different GPM algorithms, be they dual- or single-frequency, although in most cases, the dual-frequency algorithms present the better performances. Furthermore, the agreement between satellite and ground-based estimates depends on the considered precipitation variable. The agreement is very promising for rain rate, reflectivity factor, and the mass-weighted mean diameter (Dm), while the satellite retrievals need to be improved for the normalized gamma DSD intercept parameter (Nw).

Research on Energy-Saving Algorithms with Migration Energy Consumption in Heterogeneous Cloud Environment

2014 ◽  
Vol 986-987 ◽  
pp. 1383-1386
Author(s):  
Zhen Xing Yang ◽  
He Guo ◽  
Yu Long Yu ◽  
Yu Xin Wang
Keyword(s):  
Cloud Computing ◽  
Energy Consumption ◽  
Energy Saving ◽  
Large Scale ◽  
Electrical Energy ◽  
Cloud Environment ◽  
Migration Energy ◽  
Live Migration ◽  
Large Scale Data ◽  
Heterogeneous Cloud

Cloud computing is a new emerging paradigm which delivers an infrastructure, platform and software as services in a pay-as-you-go model. However, with the development of cloud computing, the large-scale data centers consume huge amounts of electrical energy resulting in high operational costs and environment problem. Nevertheless, existing energy-saving algorithms based on live migration don’t consider the migration energy consumption, and most of which are designed for homogeneous cloud environment. In this paper, we take the first step to model energy consumption in heterogeneous cloud environment with migration energy consumption. Based on this energy model, we design energy-saving Best fit decreasing (ESBFD) algorithm and energy-saving first fit decreasing (ESFFD) algorithm. We further provide results of several experiments using traces from PlanetLab in CloudSim. The experiments show that the proposed algorithms can effectively reduce the energy consumption of data center in the heterogeneous cloud environment compared to existing algorithms like NEA, DVFS, ST (Single Threshold) and DT (Double Threshold).

Sign in / Sign up

Export Citation Format

Share Document