scholarly journals Influence of Stabilizing and Encapsulating Polymers on Antioxidant Capacity, Stability, and Kinetic Release of Thyme Essential Oil Nanocapsules

Foods ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 1884
Author(s):  
Ricardo M. González-Reza ◽  
Humberto Hernández-Sánchez ◽  
Maria L. Zambrano-Zaragoza ◽  
Gustavo F. Gutiérrez-López ◽  
Alicia Del-Real ◽  
...  
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Zeta Potential ◽  
Antioxidant Capacity ◽  
Infrared Spectra ◽  
Diffuse Reflectance ◽  
Release Kinetics ◽  
Strong Dependence ◽  
Thyme Essential Oil ◽  
Polymeric Nanocapsules

The release kinetics, stability, and antioxidant capacity of thyme essential oil polymeric nanocapsules as a function of encapsulating (poly-ε-caprolactone and ethylcellulose) and stabilizing (polyvinyl alcohol and Pluronic® F-127) polymers were established. Samples were evaluated in terms of particle size, zeta potential, release kinetics, calorimetry, infrared spectra, antioxidant capacity, and diffuse reflectance. The particle size obtained was below 500 nm in all cases, ensuring nanometric size. Zeta potential as a function of the stabilizing polymer. Encapsulation efficiency was higher in the samples that contained ethyl cellulose (around 70%), associated with its affinity for the molecules contained in the essential oil. Differential scanning calorimetry revealed a strong dependence on the encapsulating polymers as a function of the melting temperatures obtained. Infrared spectra confirmed that the polymeric nanocapsules had the typical bands of the aromatic groups of thyme essential oil. The antioxidant capacity evaluated is a function exclusively of the active content in the nucleolus of the nanocapsules. Nanoencapsulation was not a significant factor. Diffuse reflectance revealed high physical stability of the dispersions related directly to the particle size and zeta potential obtained (either by ionic or steric effect). These findings confirm favorable characteristics that allow proposing these systems for potential applications in food processing and preservation.

scholarly journals Synthesis, Controlled Release, and Stability on Storage of Chitosan-Thyme Essential Oil Nanocapsules for Food Applications

Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 212
Author(s):  
Ricardo M. González-Reza ◽  
Humberto Hernández-Sánchez ◽  
David Quintanar-Guerrero ◽  
Liliana Alamilla-Beltrán ◽  
Yair Cruz-Narváez ◽  
...  
Keyword(s):  
Particle Size ◽  
Infrared Spectroscopy ◽  
Essential Oil ◽  
Zeta Potential ◽  
Antioxidant Capacity ◽  
Physical Stability ◽  
Release Kinetic ◽  
Scanning Calorimetry ◽  
Thyme Oil ◽  
Thyme Essential Oil

The nanoencapsulation of thyme essential oil has been greatly important in food science, given its remarkable antioxidant and antimicrobial capacity. However, its analysis in storage has not been established in terms of physical stability, antioxidant capacity, and release studies. In this paper, chitosan-thyme oil nanocapsules were prepared by the ionic gelation method. These were characterized for differential calorimetry, release kinetic, and infrared spectroscopy. The chitosan-thyme oil nanocapsules were stored at 4 and 25 °C for 5 weeks, the changes in particle size, zeta potential, stability (diffuse reflectance), and antioxidant capacity were analyzed and associated with nanocapsules’ functionality. The results show that the storage time and temperature significantly modify the particle size (keeping the nano-size throughout the storage), the release of the bioactive was Fickian with t0.193 according to Korsmery & Peppas and best described by Higuchi model associated with changes in the zeta potential from 8 mV to −11 mV at 4 °C. The differential scanning calorimetry and infrared spectroscopy results confirm the good integration of the components. The antioxidant capacity revealed a direct relationship with residual oil concentration with a decrease in the ABTS test of 15% at 4 °C and 37% at 25 °C. The residual bioactive content was 77% at 4 °C and 62% at 25 °C, confirming nanoencapsulation effectiveness. The present investigation provides helpful information so that these systems can be applied in food conservation.

Incorporation of micro/nanoparticles of PCL with essential oil of Cymbopogon nardus in bacterial cellulose

2018 ◽  
Vol 1 (2) ◽  
pp. 37
Author(s):  
Aline Krindges ◽  
Vanusca Dalosto Jahno ◽  
Fernando Morisso
Keyword(s):  
Particle Size ◽  
Particulate Matter ◽  
Essential Oil ◽  
Zeta Potential ◽  
Bacterial Cellulose ◽  
Culture Medium ◽  
Static Culture ◽  
Cymbopogon Nardus ◽  
Cellulose Membranes

Incorporation studies of particles in different substrates with herbal assets growing. The objective of this work was the preparation and characterization of micro/nanoparticles containing cymbopogon nardus essential oil; and the incorporation of them on bacterial cellulose. For the development of the membranes was used the static culture medium and for the preparation of micro/nanoparticles was used the nanoprecipitation methodology. The incorporation of micro/nanoparticles was performed on samples of bacterial cellulose in wet and dry form. For the characterization of micro/nanoparticles were carried out analysis of SEM, zeta potential and particle size. For the verification of the incorporation of particulate matter in cellulose, analyses were conducted of SEM and FTIR. The results showed that it is possible the production and incorporation of micro/nanoparticles containing essential oil in bacterial cellulose membranes in wet form with ethanol.

scholarly journals FORMULATION AND CHARACTERIZATION OF TIMOLOL MALEATE-LOADED NANOPARTICLES GEL BY IONIC GELATION METHOD USING CHITOSAN AND SODIUM ALGINATE

2019 ◽  
pp. 48-54 ◽  
Author(s):  
RISA AHDYANI ◽  
LARAS NOVITASARI ◽  
RONNY MARTIEN
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Polydispersity Index ◽  
Ionic Gelation ◽  
Timolol Maleate ◽  
Optimum Formula

Objective: The objectives of this study were to formulate and characterize nanoparticles gel of timolol maleate (TM) by ionic gelation method using chitosan (CS) and sodium alginate (SA). Methods: Optimization was carried out by factorial design using Design Expert®10.0.1 software to obtain the concentration of CS, SA, and calcium chloride (CaCl2) to produce the optimum formula of TM nanoparticles. The optimum formula was characterized for particle size, polydispersity index, entrapment efficiency, Zeta potential, and molecular structure. Hydroxy Propyl Methyl Cellulose (HPMC) K15 was incorporated into optimum formula to form nanoparticles gel of TM and carried out in vivo release study using the Franz Diffusion Cell. Results: TM nanoparticles was successfully prepared with concentration of CS, SA, and CaCl2 of 0.01 % (w/v), 0.1 % (w/v), and 0.25 % (w/v), respectively. The particle size, polydispersity index, entrapment efficiency, and Zeta potential were found to be 200.47±4.20 nm, 0.27±0.0154, 35.23±4.55 %, and-5.68±1.80 mV, respectively. The result of FTIR spectra indicated TM-loaded in the nanoparticles system. In vitro release profile of TM-loaded nanoparticles gel showed controlled release and the Korsmeyer-Peppas model was found to be the best fit for drug release kinetics. Conclusion: TM-loaded CS/SA nanoparticles gel was successfully prepared and could be considered as a promising candidate for controlled TM delivery of infantile hemangioma treatment.

scholarly journals Potential food additive of Boswellia carterii essential oil encapsulated within gum arabic: a particle size distribution and zeta potential analysis

Food Research ◽  
2020 ◽  
Vol 4 (S2) ◽  
pp. 19-23
Author(s):  
M.S. Barre ◽  
F.B. Ali ◽  
M.E.S. Mirghani ◽  
N.F. Hazri ◽  
H. Anuar ◽  
...  
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Zeta Potential ◽  
Gum Arabic ◽  
Food Additive ◽  
Acacia Senegal ◽  
Production Chain ◽  
Flight Mass Spectrometry ◽  
Product Gas ◽  
Boswellia Carterii

Boswellia carterii (BC) {Burseraceae family} essential oil (EO) were extracted by hydrodistillation process. Gum Arabic (GA) {Acacia senegal} polymer particles containing a BCEO were prepared by spray drying technique. The mean particle size and its distribution, as well as the zeta-potential of the microcapsules, were analyzed and found Z-Average 382±203nm, PDI 0.77±0.3, ZP-25±2.73mV, respectively. Product encapsulation efficiency (EE %) was found at 75±0.8%. The surface morphology of the particles was obtained by scanning electron microscope (SEM). Furthermore, particles moisture content was analyzed by the oven drying method. The efficiency of encapsulation (EE %) was estimated by specifying the content of essential oil in the product. Gas chromatography (GC) coupled with time-of-flight mass spectrometry (TOFMS) analysis of EO has been performed to determine the chemical compounds and their prevalence concentrations respectively. The composition of initial essential oil (added in the emulsion) and the encapsulated essential oil (extracted from spray dried powder) were analyzed and compared. The outcome of the research encourages the high potentiality and usefulness of the product in the food industries sector as a food additive agent, moreover, it suggests for further research to unravel potential implementation of BCEO microcapsules in the food production chain

scholarly journals PREPARATION, PHYSICAL CHARACTERIZATION, AND PHARMACOKINETIC STUDY OF DOCETAXEL NANOCRYSTALS

2019 ◽  
pp. 238-244
Author(s):  
ARVIND GANNIMITTA ◽  
PRATHIMA SRINIVAS ◽  
VENKATESHWAR REDDY A ◽  
PEDIREDDI SOBHITA RANI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Water Solubility ◽  
Release Kinetics ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Sustained Drug Release ◽  
Egg Lecithin

Objective: The main objective of this study was to prepare and evaluate the nanocrystal formulation of docetaxel. Methods: Docetaxel nanocrystals were formulated to improve the water solubility. Docetaxel nanocrystals were prepared by nanoprecipitation method using Tween 80, egg lecithin, and povidone C-12 as stabilizers and poly(lactic-co-glycolic acid) (PLGA) as polymer in acceptable limits. A total of 16 formulations were prepared by changing stabilizer and polymer ratios. The prepared nanocrystals were characterized by particle size, zeta potential, crystalline structure, surface morphology, assay, saturation solubility, and in vitro drug release. Results: Based on particle size, polydispersity index, and zeta potential data, four formulations were optimized. The formulation containing Tween 80 as stabilizer has shown lowest particle size and better drug release than the formulations containing egg lecithin and povidone C-12 as stabilizers. The formulation containing Tween 80 and PLGA has shown still lower sized particles than the Tween 80 alone and exhibited prolonged sustained drug release. The release kinetics of formulations containing Tween 80 and PLGA followed zero-order release kinetics and formulations containing egg lecithin and povidone C-12 followed Higuchi diffusion (non-Fickian). Conclusion: From the study, we concluded that as the type and concentration of stabilizer changed the size and shape of the crystals were also changed and the formulations showed sustained drug release with non-Fickian diffusion.

scholarly journals FABRICATION AND IN VITRO CHARACTERIZATION OF A NOVEL NANOSUSPENSION OF TELMISARTAN: A POORLY SOLUBLE DRUG PREPARED BY ANTISOLVENT PRECIPITATION TECHNIQUE USING 33 FACTORIAL DESIGN

2020 ◽  
pp. 286-294
Author(s):  
PRASANTA KUMAR MOHAPATRA ◽  
SIREESHA ◽  
VAIBHAV RATHORE ◽  
HARISH CHANDRA VERMA ◽  
BIBHUTI PRASAD RATH ◽  
...  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Dissolution Rate ◽  
Release Kinetics ◽  
Precipitation Method ◽  
Lauryl Sulfate ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Objective: The motivation behind the current examination was to build the solvency and dissolution rate of an antihypertensive drug telmisartan by the planning of nanosuspension by precipitation method at the research facility scale. We researched the nanoparticle manufacture of telmisartan employing a 33 factorial experimental configuration considering the impacts of nanosuspension on the physical, morphological, and dissolution properties of telmisartan. Methods: To get ready, nanosuspension particles of an ineffectively dissolvable drug are moreover of a drug solution to the anti-solvent leads to abrupt supersaturation and precipitation the making of nanoparticles. The nanosuspension particles of a poorly soluble drug loaded with urea and surfactants (sodium lauryl sulfate (SLS), poloxamer 188, Tween 80) have been prepared by a precipitation method. The nanosuspension particles were characterized for particle size, zeta potential, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), in vitro drug release, and release kinetics. Results: The readily optimized batch nanosuspension particles evaluated and exhibited the particle size (750 nm), zeta potential (-24.33 mV), differential scanning calorimetry (DSC) drug exhibited a change in crystalline form to amorphous, in vitro dissolution (F12 was higher 95% within 5 min) and drug release kinetics. The formulation parameter of surfactant concentration is optimized. Conclusion: The formulation of the nanosuspension approach has been shown to substantial improvement in the dissolution rate, thereby enhancing the oral bioavailability with the future development of this technology.

scholarly journals FORMULATION AND EVALUATION OF ETHAMBUTOL POLYMERIC NANOPARTICLES

2020 ◽  
pp. 207-217
Author(s):  
MONOWAR HUSSAIN ◽  
ANUPAM SARMA ◽  
SHEIKH SOFIUR RAHMAN ◽  
ABDUL MATIN SIDDIQUE ◽  
TANUKU PAVANI EESWARI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Polymeric Nanoparticles ◽  
Release Kinetics ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Compatibility Study ◽  
Bacterial Disease ◽  
Dose Frequency

Objective: Tuberculosis (TB) is an infectious bacterial disease caused by Mycobacterium tuberculosis which most commonly affects the lungs. TB has the highest mortality rate than any other infectious disease occurs worldwide. The main objective of the present investigation was to develop polymeric nanoparticles based drug delivery system to sustain the ethambutol (ETB) release by reducing the dose frequency. Methods: The Preformulation studies of drug ETB were done by physical characterization, melting point determination, and UV spectrophotometric analysis. The ETB loaded nanoparticles were prepared by double-emulsion (W/O/W) solvent evaporation/diffusion technique. The prepared polymeric nanoparticles were evaluated for particle size, polydispersity index, zeta potential, drug entrapment efficiency, drug loading, drug-polymer compatibility study, surface morphology, in vitro drug release, and release kinetics. Results: Based on the result obtained from the prepared formulations, F11 showed the best result and was selected as the optimized formulation. Optimized batch (F11) showed better entrapment efficiency (73.3%), good drug loading capacity (13.21%), optimum particle size (136.1 nm), and zeta potential (25.2 mV) with % cumulative drug release of 79.08% at the end of 24 h. Conclusion: These results attributed that developed polymeric nanoparticles could be effective in sustaining the ETB release over 24 h. Moreover, the developed nanoparticles could be an alternate method for ETB delivery with a prolonged drug release profile and a better therapeutic effect can be achieved for the treatment of tuberculosis.

scholarly journals An Innovative Formulation Based on Nanostructured Lipid Carriers for Imatinib Delivery: Pre-Formulation, Cellular Uptake and Cytotoxicity Studies

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 250
Author(s):  
Evren Gundogdu ◽  
Emine-Selin Demir ◽  
Meliha Ekinci ◽  
Emre Ozgenc ◽  
Derya Ilem-Ozdemir ◽  
...  
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Cellular Uptake ◽  
Enzyme Inhibitor ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Nanostructured Lipid Carrier ◽  
Loading Capacity ◽  
Cytotoxicity Studies

Imatinib (IMT) is a tyrosine kinase enzyme inhibitor and extensively used for the treatment of gastrointestinal stromal tumors (GISTs). A nanostructured lipid carrier system (NLCS) containing IMT was developed by using emulsification–sonication methods. The characterization of the developed formulation was performed in terms of its particle size, polydispersity index (PDI), zeta potential, entrapment efficiency, loading capacity, sterility, syringeability, stability, in vitro release kinetics with mathematical models, cellular uptake studies with flow cytometry, fluorescence microscopy and cytotoxicity for CRL-1739 cells. The particle size, PDI, loading capacity and zeta potential of selected NLCS (F16-IMT) were found to be 96.63 ± 1.87 nm, 0.27 ± 0.15, 96.49 ± 1.46% and −32.7 ± 2.48 mV, respectively. F16-IMT was found to be stable, thermodynamic, sterile and syringeable through an 18 gauze needle. The formulation revealed a Korsmeyer–Peppas drug release model of 53% at 8 h, above 90% of cell viability, 23.61 µM of IC50 and induction of apoptosis in CRL-1739 cell lines. In the future, F16-IMT can be employed to treat GISTs. A small amount of IMT loaded into the NLCSs will be better than IMT alone for therapy for GISTs. Consequently, F16-IMT could prove to be useful for effective GIST treatment.

scholarly journals Polysaccharide-Based Multilayer Nano-Emulsions Loaded with Oregano Oil: Production, Characterization, and In Vitro Digestion Assessment

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 878
Author(s):  
Luz Espinosa-Sandoval ◽  
Claudia Ochoa-Martínez ◽  
Alfredo Ayala-Aponte ◽  
Lorenzo Pastrana ◽  
Catarina Gonçalves ◽  
...  
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Zeta Potential ◽  
In Vitro Digestion ◽  
High Energy ◽  
Oregano Essential Oil ◽  
Emulsification Capacity ◽  
Octenyl Succinic Anhydride ◽  
Nano Emulsion

The food industry has increased its interest in using “consumer-friendly” and natural ingredients to produce food products. In the case of emulsifiers, one of the possibilities is to use biopolymers with emulsification capacity, such as octenyl succinic anhydride modified starch, which can be used in combination with other polysaccharides, such as chitosan and carboxymethylcellulose, in order to improve the capacity to protect bioactive compounds. In this work, multilayer nano-emulsion systems loaded with oregano essential oil were produced by high energy methods and characterized. The process optimization was carried out based on the evaluation of particle size, polydispersity index, and zeta potential. Optimal conditions were achieved for one-layer nano-emulsions resulting in particle size and zeta potential of 180 nm and −42 mV, two layers (after chitosan addition) at 226 nm and 35 mV, and three layers (after carboxymethylcellulose addition) of 265 nm and −1 mV, respectively. The encapsulation efficiency of oregano essential oil within nano-emulsions was 97.1%. Stability was evaluated up to 21 days at 4 and 20 °C. The three layers nano-emulsion demonstrated to be an efficient delivery system of oregano essential oil, making 40% of the initial oregano essential oil available versus 13% obtained for oregano essential oil in oil, after exposure to simulated digestive conditions.

scholarly journals Development of nano-emulsions based on Ayapana triplinervis essential oil for the control of Aedes aegypti larvae

PLoS ONE ◽  
2021 ◽  
Vol 16 (7) ◽  
pp. e0254225
Author(s):  
Alex Bruno Lobato Rodrigues ◽  
Rosany Lopes Martins ◽  
Érica de Menezes Rabelo ◽  
Rosana Tomazi ◽  
Lizandra Lima Santos ◽  
...  
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Zeta Potential ◽  
Aedes Aegypti ◽  
Essential Oils ◽  
Dimethyl Ether ◽  
Inflammatory Cells ◽  
Polydispersity Index ◽  
Oral Toxicity ◽  
Nano Emulsion

Ayapana triplinervis is a plant species used in traditional medicine and in mystical-religious rituals by traditional communities in the Amazon. The aim of this study are to develop a nano-emulsion containing essential oil from A. triplinervis morphotypes, to evaluate larvicidal activity against Aedes aegypti and acute oral toxicity in Swiss albino mice (Mus musculus). The essential oils were extracted by steam dragging, identified by gas chromatography coupled to mass spectrometry, and nano-emulsions were prepared using the low energy method. Phytochemical analyses indicated the major compounds, expressed as area percentage, β-Caryophyllene (45.93%) and Thymohydroquinone Dimethyl Ether (32.93%) in morphotype A; and Thymohydroquinone Dimethyl Ether (84.53%) was found in morphotype B. Morphotype A essential oil nano-emulsion showed a particle size of 101.400 ± 0.971 nm (polydispersity index = 0.124 ± 0.009 and zeta potential = -19.300 ± 0.787 mV). Morphotype B essential oil nano-emulsion had a particle size of 104.567 ± 0.416 nm (polydispersity index = 0.168 ± 0.016 and zeta potential = -27.700 ± 1.307 mV). Histomorphological analyses showed the presence of inflammatory cells in the liver of animals treated with morphotype A essential oil nano-emulsion (MAEON) and morphotype B essential oil nano-emulsion (MBEON). Congestion and the presence of transudate with leukocyte infiltration in the lung of animals treated with MAEON were observed. The nano-emulsions containing essential oils of A. triplinervis morphotypes showed an effective nanobiotechnological product in the chemical control of A. aegypti larvae with minimal toxicological action for non-target mammals.

Sign in / Sign up

Export Citation Format

Share Document