scholarly journals Three-Dimensional Soft Material Micropatterning via Grayscale Photolithography for Improved Hydrophobicity of Polydimethylsiloxane (PDMS)

Micromachines ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 78
Author(s):  
Intan Sue Liana Abdul Hamid ◽  
Beh Khi Khim ◽  
Mohammad Faiz Mohamed Omar ◽  
Khairu Anuar Mohamad Zain ◽  
Nuha Abd Rhaffor ◽  
...  
Keyword(s):  
Pure Water ◽  
Three Dimensional ◽  
Surface Hydrophobicity ◽  
Contact Angles ◽  
Master Mold ◽  
Water Contact ◽  
Pdms Surface ◽  
Lithography Technique ◽  
Scanning Electron ◽  
Micropillar Arrays

In this present work, we aim to improve the hydrophobicity of a polydimethylsiloxane (PDMS) surface. Various heights of 3D PDMS micropillars were fabricated via grayscale photolithography, and improved wettability was investigated. Two approaches of PDMS replication were demonstrated, both using a single master mold to obtain the micropillar arrays. The different heights of fabricated PDMS micropillars were characterized by scanning electron microscopy (SEM) and a surface profiler. The surface hydrophobicity was characterized by measuring the water contact angles. The fabrication of PDMS micropillar arrays was shown to be effective in modifying the contact angles of pure water droplets with the highest 157.3-degree water contact angle achieved by implementing a single mask grayscale lithography technique.

scholarly journals The Effect of Hydroxyl on the Superhydrophobicity of Dodecyl Methacrylate (LMA) Coated Fabrics through Simple Dipping-Plasma Crosslinked Method

Coatings ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1263
Author(s):  
Liyun Xu ◽  
Yu Zhang ◽  
Ying Guo ◽  
Ruiyun Zhang ◽  
Jianjun Shi ◽  
...  
Keyword(s):  
Thermoplastic Polyurethane ◽  
Hydrophobic Effect ◽  
Surface Hydrophobicity ◽  
Contact Angles ◽  
Binding Property ◽  
Interesting Phenomenon ◽  
Water Contact ◽  
Capacitively Coupled ◽  
Pet Fabric ◽  
Dodecyl Methacrylate

In order to obtain stable superhydrophobicity, suitable hydrophobic treatment agents should be selected according to different material properties. In this paper, cotton and poly(ethylene terephthalate) (PET) fabrics were respectively coated with dodecyl methacrylate (LMA) via argon combined capacitively coupled plasma (CCP), and the surface hydrophobicity and durability of the treated cotton and polyester fabrics are also discussed. An interesting phenomenon happened, whereby the LMA-coated cotton fabric (Cotton-g-LMA) had better water repelling and mechanical durability properties than LMA-coated PET fabric (PET-g-LMA), and LMA-coated hydroxyl-grafted PET fabrics (PET fabrics were successively coated with polyethylene glycol (PEG) and LMA, PET-g-PEG & LMA) had a similar performance to cotton fabrics. The water contact angles of Cotton-g-LMA, PET-g-LMA and PET-g-PEG & LMA were 156°, 153° and 155°, respectively, and after 45 washing cycles or 1000 rubbing cycles, the corresponding water contact angles decreased to 145°, 88°, 134° and 146°, 127° and 143°, respectively. Additionally, thermoplastic polyurethane (TPU) and polyamides-6 (PA6) fabrics all exhibited the same properties as the PET fabric. Therefore, the grafting of hydroxyl can improve the hydrophobic effect of LMA coating and the binding property between LMA and fabrics effectively, without changing the wearing comfort.

scholarly journals Enhanced Anti-Mold Property and Mechanism Description of Ag/TiO2 Wood-Based Nanocomposites Formation by Ultrasound- and Vacuum-Impregnation

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 682
Author(s):  
Lin Lin ◽  
Jiaming Cao ◽  
Jian Zhang ◽  
Qiliang Cui ◽  
Yi Liu
Keyword(s):  
Electron Microscopy ◽  
Cell Walls ◽  
Mercury Intrusion Porosimetry ◽  
Water Source ◽  
Contact Angles ◽  
Vacuum Impregnation ◽  
Water Contact ◽  
Mercury Intrusion ◽  
Wood Surfaces ◽  
Scanning Electron

Ag/TiO2 wood-based nanocomposites were prepared by the methods of ultrasound impregnation and vacuum impregnation. The as-prepared samples were characterized by field emission scanning electron microscopy (FESEM), energy-dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), mercury intrusion porosimetry (MIP), and water contact angles (WCAs). The anti-mold properties of the Ag/TiO2 wood-based nanocomposites were improved by 14 times compared to those of the original wood. The nano-Ag/TiO2, which was impregnated in the tracheid and attached to the cell walls, was able to form a two-stage rough structure and reduce the number of hydroxyl functional groups on the wood surfaces. The resulting decline of wood hydrophobic and equilibrium moisture content (EMC) destroyed the moisture environment necessary for mold survival. Ag/TiO2 was deposited in the wood pores, which reduced the number and volume of pores and blocked the path of mold infection. Thus, the anti-mold properties of the Ag/TiO2 wood-based nanocomposite were improved by cutting off the water source and blocking the mold infection path. This study reveals the anti-mold mechanism of Ag/TiO2 wood-based nanocomposites and provides a feasible pathway for wood-based nanocomposites with anti-mold functions.

scholarly journals Polycaprolactone-Chitin Nanofibrous Mats as Potential Scaffolds for Tissue Engineering

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Min Sup Kim ◽  
Sang Jun Park ◽  
Bon Kang Gu ◽  
Chun-Ho Kim
Keyword(s):  
Electron Microscopy ◽  
Tissue Engineering ◽  
Contact Angles ◽  
Dermal Fibroblasts ◽  
Human Dermal Fibroblasts ◽  
Water Contact ◽  
Mean Diameter ◽  
Poly Caprolactone ◽  
Scanning Electron

We describe here the preparation of poly(caprolactone) (PCL)-chitin nanofibrous mats by electrospinning from a blended solution of PCL and chitin dissolved in a cosolvent, 1,1,1,3,3,3-hexafluoro-2-propanol and trifluoroacetic acid. Scanning electron microscopy showed that the neutralized PCL-chitin nanofibrous mats were morphologically stable, with a mean diameter of340.5±2.6 nm, compared with a diameter of524.2±12.1 nm for PCL mats. The nanofibrous mats showed decreased water contact angles as the proportion of chitin increased. However, the tensile properties of nanofibrous mats containing30~50% (wt/wt) chitin were enhanced compared with PCL-only mats.In vitrostudies showed that the viability of human dermal fibroblasts (HDFs) for up to 7 days in culture was higher on composite (OD value:1.42±0.09) than on PCL-only (0.51±0.14) nanofibrous mats, with viability correlated with chitin concentration. Together, our results suggest that PCL-chitin nanofibrous mats can be used as an implantable substrate to modulate HDF viability in tissue engineering.

The Use of X-Ray Photoelectron Spectroscopy for the Study of Oral Streptococcal Cell Surfaces

1997 ◽  
Vol 11 (4) ◽  
pp. 388-394 ◽  
Author(s):  
H.C. Van Der Mei ◽  
H.J. Busscher
Keyword(s):  
Cell Surface ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
Cell Surface Hydrophobicity ◽  
Surface Hydrophobicity ◽  
Contact Angles ◽  
Microbial Cell ◽  
Cell Surfaces ◽  
Water Contact ◽  
X Ray

Physicochemical and structural properties of microbial cell surfaces play an important role in their adhesion to surfaces and are determined by the chemical composition of the outermost cell surface. Many traditional methods used to determine microbial cell wall composition require fractionation of the organisms and consequently do not yield information about the composition of the outermost cell surface. X-ray photoelectron spectroscopy (XPS) measures the elemental composition of the outermost cell surfaces of micro-organisms. The technique requires freeze-drying of the organisms, but, nevertheless, elemental surface concentration ratios of oral streptococcal cell surfaces with peritrichously arranged surface structures showed good relationships with physicochemical properties measured under physiological conditions, such as zeta potentials. Isoelectric points ap-peared to be governed by the relative abundance of oxygen- and nitrogen-containing groups on the cell surfaces. Also, the intrinsic microbial cell-surface hydrophobicity by water contact angles related to the cell-surface composition as by XPS and was highest for strains with an elevated isoelectric point. Inclusion of elemental surface compositions for tufted streptococcal strains caused deterioration of the relationships found. Interestingly, hierarchical cluster analysis on the basis of the elemental surface compositions revealed that, of 36 different streptococcal strains, only four S. rattus as well as nine S. mitis strains were located in distinct groups, well separated from the other streptococcal strains, which were all more or less mixed in one group.

Mucin Coating on Hydrophobic Polymer Materials

1999 ◽  
Vol 599 ◽  
Author(s):  
L. Shi ◽  
K. D. Caldwell
Keyword(s):  
Submaxillary Gland ◽  
Surface Concentration ◽  
Surface Hydrophobicity ◽  
Contact Angles ◽  
Polymer Materials ◽  
Adsorption Model ◽  
Kinetics Parameters ◽  
Water Contact ◽  
Long Term Observation

AbstractIn this work, the adsorption isotherm and kinetics of bovine submaxillary gland mucin (BSM) onto a hydrophobic polystyrene surface were studied by the solution depletion method, in which mucin surface concentrations were analyzed by amino acid analysis. Using a Langmuir adsorption model and non-linear curve fitting, kinetics parameters, kon and koff were determined. The coating was found to be very stable with very limited desorption (less than 2%) from a long term observation. By measuring the water contact angles, the changes in surface hydrophobicity due to mucin coating were monitored on four polymer materials, namely polymethylmethacrylate (PMMA), polyurethane (PU), polystyrene (PS), and silicone. After coating, all the hydrophobic surfaces turned into very hydrophilic. A strict correlation between mucin surface concentration and surface wettability has been found.

scholarly journals Bacterial factors influencing adhesion of Pseudomonas aeruginosa strains to a poly(ethylene oxide) brush

Microbiology ◽  
2006 ◽  
Vol 152 (9) ◽  
pp. 2673-2682 ◽  
Author(s):  
Astrid Roosjen ◽  
Henk J. Busscher ◽  
Willem Norde ◽  
Henny C. van der Mei
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Ethylene Oxide ◽  
Cell Surface Hydrophobicity ◽  
Surface Hydrophobicity ◽  
Contact Angles ◽  
Bacterial Strains ◽  
Water Contact ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Brush Coating

Most bacterial strains adhere poorly to poly(ethylene oxide) (PEO)-brush coatings, with the exception of a Pseudomonas aeruginosa strain. The aim of this study was to find factors determining whether P. aeruginosa strains do or do not adhere to a PEO-brush coating in a parallel plate flow chamber. On the basis of their adhesion, a distinction could be made between three adhesive and three non-adhesive strains of P. aeruginosa, while bacterial motilities and zeta potentials were comparable for all six strains. However, water contact angles indicated that the adhesive strains were much more hydrophobic than the non-adhesive strains. Furthermore, only adhesive strains released surfactive extracellular substances, which may be engaged in attractive interactions with the PEO chains. Atomic force microscopy showed that the adhesion energy, measured from the retract curves of a bacterial-coated cantilever from a brush coating, was significantly more negative for adhesive strains than for non-adhesive strains (P<0.001). Through surface thermodynamic and extended-DLVO (Derjaguin, Landau, Verwey, Overbeek) analyses, these stronger adhesion energies could be attributed to acid–base interactions. However, the energies of adhesion of all strains to a brush coating were small when compared with their energies of adhesion to a glass surface. Accordingly, even the adhesive P. aeruginosa strains could be easily removed from a PEO-brush coating by the passage of a liquid–air interface. In conclusion, cell surface hydrophobicity and surfactant release are the main factors involved in adhesion of P. aeruginosa strains to PEO-brush coatings.

scholarly journals Surface Modification of Additively Manufactured Nitinol by Wet Chemical Etching

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7683
Author(s):  
Denis Nazarov ◽  
Aida Rudakova ◽  
Evgenii Borisov ◽  
Anatoliy Popovich
Keyword(s):  
Mechanical Properties ◽  
Free Surface ◽  
Surface Energy ◽  
Surface Composition ◽  
Three Dimensional ◽  
Physicochemical Characteristics ◽  
Contact Angles ◽  
Free Surface Energy ◽  
Flat Plates ◽  
Water Contact

Three-dimensional printed nitinol (NiTi) alloys have broad prospects for application in medicine due to their unique mechanical properties (shape memory effect and superplasticity) and the possibilities of additive technologies. However, in addition to mechanical properties, specific physicochemical characteristics of the surface are necessary for successful medical applications. In this work, a comparative study of additively manufactured (AM) NiTi samples etched in H2SO4/H2O2, HCl/H2SO4, and NH4OH/H2O2 mixtures was performed. The morphology, topography, wettability, free surface energy, and chemical composition of the surface were studied in detail. It was found that etching in H2SO4/H2O2 practically does not change the surface morphology, while HCl/H2SO4 treatment leads to the formation of a developed morphology and topography. In addition, exposure of nitinol to H2SO4/H2O2 and HCl/H2SO4 contaminated its surface with sulfur and made the surface wettability unstable in air. Etching in NH4OH/H2O2 results in surface cracking and formation of flat plates (10–20 microns) due to the dissolution of titanium, but clearly increases the hydrophilicity of the surface (values of water contact angles are 32–58°). The etch duration (30 min or 120 min) significantly affects the morphology, topography, wettability and free surface energy for the HCl/H2SO4 and NH4OH/H2O2 etched samples, but has almost no effect on surface composition.

Tailoring Surface Hydrophobicity of Commercial Polyimide by Laser-Induced Nanocarbon Texturing

2020 ◽  
Vol 8 (3) ◽  
Author(s):  
Moataz Abdulhafez ◽  
Angela J. McComb ◽  
Mostafa Bedewy
Keyword(s):  
Contact Angle ◽  
Surface Characterization ◽  
Surface Engineering ◽  
Processing Parameters ◽  
Surface Hydrophobicity ◽  
Spot Size ◽  
Contact Angles ◽  
Water Contact ◽  
Wide Range ◽  
Surface Nanostructure

Abstract The growth of laser-induced nanocarbons, referred to here as laser-induced nanocarbon (LINC) for short, directly on polymeric surfaces is a promising route toward surface engineering of commercial polymers. This paper aims to demonstrate how this new approach can enable achieving varied surface properties based on tuning the nanostructured morphology of the formed graphitic material on commercial polyimide (Kapton) films. We elucidate the effects of tuning laser processing parameters on the achieved nanoscale morphology and the resulting surface hydrophobicity or hydrophilicity. Our results show that by varying lasing power, rastering speed, laser spot size, and line-to-line gap sizes, a wide range of water contact angles are possible, i.e., from below 20 deg to above 110 deg. Combining water contact angle measurements from an optical tensiometer with LINC surface characterization using optical microscopy, electron microscopy, and Raman spectroscopy enables building the process–structur–property relationship. Our findings reveal that both the value of contact angle and the anisotropic wetting behavior of LINC on polyimide are dependent on their hierarchical surface nanostructure which ranges from isotropic nanoporous morphology to fibrous morphology. Results also show that increasing gap sizes lead to an increase in contact angles and thus an increase in the hydrophobicity of the surface. Hence, our work highlight the potential of this approach for manufacturing flexible devices with tailored surfaces.

Preparation and characterization of phenolphthalein polyethersulfone/silica nanofibrous membranes by solution blowing

2018 ◽  
Vol 32 (6) ◽  
pp. 746-760 ◽  
Author(s):  
Guocheng Song ◽  
Yang Chen ◽  
Jing Zhu ◽  
Junrong Yu ◽  
Yan Wang ◽  
...  
Keyword(s):  
Pure Water ◽  
Composite Membranes ◽  
Contact Angles ◽  
Attenuated Total Reflectance ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Water Contact ◽  
Solution Blowing ◽  
Nanofibrous Membranes

Phenolphthalein polyethersulfone (PES-C)/silica (SiO2) composite nanofibrous membranes were prepared via solution blowing. The spinning solutions were prepared by mixing a solution of PES-C in dimethylacetamide with different amounts of colloidal SiO2 in ethylene glycol. Attenuated total reflectance–Fourier transform infrared spectroscopy, wide-angle X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, and water contact angles were conducted to characterize the properties of composite nanofibrous membranes. The results showed that the thermal properties and surface wettability were improved by the addition of appropriate amount of nano-SiO2. Furthermore, permeation fluxes of pure water and the filtration of starch suspension were measured to evaluate the antifouling property of the PES-C/SiO2 composite membranes.

Uniformly Structured Methyltrimethoxysilane-Based Silica Aerogels with Enhanced Mechanical Property by Surfactant-Free Fabrication

2019 ◽  
Vol 19 (03) ◽  
pp. 1950017
Author(s):  
Yutie Bi ◽  
Jiayi Zhu ◽  
Zikai Xie ◽  
Hongbo Ren
Keyword(s):  
Contact Angle ◽  
Failure Strain ◽  
Testing Machine ◽  
Three Dimensional ◽  
Silica Aerogels ◽  
Water Contact ◽  
Molar Ratios ◽  
Universal Testing ◽  
Superhydrophobic Property ◽  
Scanning Electron

The uniformity, elasticity and hydrophobicity of methyltrimethoxysilane (MTMS)-based silica aerogels, which were prepared by using dimethyl sulfoxide (DMSO) as the solvent, were investigated. The as-prepared silica aerogels were characterized by means of scanning electron microscope, Fourier transform infrared, contact angle/interface system and electronic universal testing machine. The hydrophobicity of the MTMS-based silica aerogels could be adjusted by tuning the MTMS/DMSO molar ratios. The water contact angle of the MTMS-based silica aerogels could be as high as 160.2∘, suggesting its superhydrophobic property. It was found that all the MTMS-based silica aerogels had the typical three-dimensional porous structure. The failure strain of MTMS-based silica aerogels could be as high as 66.14%.

Sign in / Sign up

Export Citation Format

Share Document