scholarly journals Titanium: An Overview of Resources and Production Methods

Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1425
Author(s):  
Mohammed El Khalloufi ◽  
Olivier Drevelle ◽  
Gervais Soucy
Keyword(s):  
Low Cost ◽  
Extractive Metallurgy ◽  
Metallurgical Industry ◽  
Metal Production ◽  
Production Methods ◽  
The Past ◽  
Kroll Process ◽  
Production Processes ◽  
Energy Consuming ◽  
Insight Into

For several decades, the metallurgical industry and the research community worldwide have been challenged to develop energy-efficient and low-cost titanium production processes. The expensive and energy-consuming Kroll process produces titanium metal commercially, which is highly matured and optimized. Titanium’s strong affinity for oxygen implies that conventional Ti metal production processes are energy-intensive. Over the past several decades, research and development have been focusing on new processes to replace the Kroll process. Two fundamental groups are categorized for these methods: thermochemical and electrochemical. This literature review gives an insight into the titanium industry, including the titanium resources and processes of production. It focuses on ilmenite as a major source of titanium and some effective methods for producing titanium through extractive metallurgy processes and presents a critical view of the opportunities and challenges.

scholarly journals Towards Sustainable and Environmentally Friendly Metallic Powder Production

2021 ◽  
Author(s):  
MELCHOR SALAZAR MARTINEZ ◽  
Flavio Américo Lagos-Galván
Keyword(s):  
Low Cost ◽  
Environmentally Friendly ◽  
High Energy ◽  
Human Beings ◽  
Production Methods ◽  
Manufacture Process ◽  
Very High Energy ◽  
Current Production ◽  
Energy Consuming ◽  
Powder Manufacture

Abstract Intermetallic Fe-Al compounds have become very interesting materials due to their properties, such as good corrosion resistance, high-temperature resistance, high resistance/weight ratios, creep resistance, good wear resistance, and low cost, including some applications where they could replace stainless steels. However, their low ductility at room temperature has limited their use. One of the solutions is to generate powders of these intermetallics and press them in the wished form. Current production methods of this type of powders are very high energy-consuming, polluting, and harmful for handling for human beings. Because of the environmental situation in our planet, it is necessary to develop more environmentally friendly processes, which have lower energy requirements. Therefore, a comparison of a novel water vapor-based FeAl powder manufacture process with Mechanical Alloying (MA), one of the most commonly used processes to produce this type of powder is made in this work. This comparison aims to focus on the advantages of the novel process concerning MA, the last one, considering environmental as well as energy criteria.

scholarly journals Recent Advances in Selective Photo-Epoxidation of Propylene: A Review

Catalysts ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 87 ◽  
Author(s):  
Van-Huy Nguyen ◽  
Ba-Son Nguyen ◽  
Hieu-Thao Vo ◽  
Chinh Chien Nguyen ◽  
Sa-Rang Bae ◽  
...  
Keyword(s):  
Low Cost ◽  
Vital Role ◽  
Active Oxygen ◽  
Photocatalytic Reaction ◽  
Fine Chemicals ◽  
Environmental Friendliness ◽  
Epoxidation Of Propylene ◽  
Production Processes ◽  
Recent Developments ◽  
Insight Into

The epoxidation of propylene to produce propylene oxide (PO) has a vital role in the industrial production of several commercial compounds and the synthesis of numerous intermediates, fine chemicals, and pharmaceuticals. However, the current PO production processes pose significant problems regarding the environment and economy. The direct photo-epoxidation of propylene using molecular oxygen (an ideal oxidant with active oxygen of 100 wt %) under light irradiation is a promising technology to produce PO. This process offers numerous advantages, including the use of simple technologies, low-cost methods, and environmental friendliness. Many efforts have focused on the design of new photocatalyst systems, optimizing the conditions for a photocatalytic reaction, and elucidating the mechanisms of photo-epoxidation. This review is expected to serve as a comprehensive background, providing researchers with insight into the recent developments regarding the direct photo-epoxidation of propylene.

Recovery boiler sootblowers: History and technological advances

TAPPI Journal ◽  
2015 ◽  
Vol 14 (1) ◽  
pp. 51-60
Author(s):  
HONGHI TRAN ◽  
DANNY TANDRA
Keyword(s):  
Cfd Modeling ◽  
Computing Systems ◽  
The Past ◽  
Technological Advances ◽  
Recovery Boilers ◽  
Computational Fluid Dynamics Cfd ◽  
Recovery Boiler ◽  
Steam Parameters ◽  
Insight Into ◽  
Deposit Removal

Sootblowing technology used in recovery boilers originated from that used in coal-fired boilers. It started with manual cleaning with hand lancing and hand blowing, and evolved slowly into online sootblowing using retractable sootblowers. Since 1991, intensive research and development has focused on sootblowing jet fundamentals and deposit removal in recovery boilers. The results have provided much insight into sootblower jet hydrodynamics, how a sootblower jet interacts with tubes and deposits, and factors influencing its deposit removal efficiency, and have led to two important innovations: fully-expanded sootblower nozzles that are used in virtually all recovery boilers today, and the low pressure sootblowing technology that has been implemented in several new recovery boilers. The availability of powerful computing systems, superfast microprocessors and data acquisition systems, and versatile computational fluid dynamics (CFD) modeling capability in the past two decades has also contributed greatly to the advancement of sootblowing technology. High quality infrared inspection cameras have enabled mills to inspect the deposit buildup conditions in the boiler during operation, and helped identify problems with sootblower lance swinging and superheater platens and boiler bank tube vibrations. As the recovery boiler firing capacity and steam parameters have increased markedly in recent years, sootblowers have become larger and longer, and this can present a challenge in terms of both sootblower design and operation.

Cross-culture outcomes of a brazilian professor Fulbright in the USA

2017 ◽  
Vol 26 (50) ◽  
pp. 115
Author(s):  
Marcelo Da Silva Leite ◽  
Celeste Gaia
Keyword(s):  
Higher Education ◽  
Low Cost ◽  
Cross Culture ◽  
College And University ◽  
Governmental Agencies ◽  
The Past ◽  
University Curriculum ◽  
Fulbright Scholar ◽  
The Usa ◽  
Higher Education Costs

Over the past decade due the expansion of globalization there has been an increasing emphasis on internationalization among faculty, administration and accrediting agencies in the Higher Education.  Although to promote internationalization in the Higher Education, costs are a big challenge, one way to have the international actions with low cost, it is seeking for grants from different governmental agencies and foundations.The Fulbright Scholar program provides a long-standing and externally-funded means for internationalizing college and university curriculum. This article is going to share the perspective   of a Brazilian Fulbright Scholar at an American college and the institution perspective of the Fulbright scholar participation at the College.

Light-Weight Tire Concept

1996 ◽  
Vol 24 (2) ◽  
pp. 119-131
Author(s):  
F. Lux ◽  
H. Stumpf
Keyword(s):  
Fuel Consumption ◽  
Automobile Industry ◽  
Rolling Resistance ◽  
Performance Standards ◽  
Light Weight ◽  
Production Methods ◽  
Lower Fuel Consumption ◽  
Material Resources ◽  
The Past ◽  
Tire Production

Abstract Current demands by the consumer, the automobile industry, and the environment have determined the basis of this investigation. In the past, the requirements—ever faster, ever sportier—were accepted as decisive parameters for the development of our study. In the future, rational and safety-related tire characteristics as well as environmental consciousness will increase, whereas purely performance-related parameters will diminish in their importance. Through our light-weight tire project, we have paved the way for future tire generations. The first priority is the minimal use of material resources; this means a reduction of materials and energy in tire production by using advanced design and production methods without sacrificing performance standards. This benefits the consumer—the final judge of all of our activities—by considerably reducing the rolling resistance, leading to lower fuel consumption. Further design targets include the improvement of rolling behavior and increased comfort by reducing tire weight, and therefore a reduction in unsprung masses on the vehicle.

An Assessment of a Low-Cost Wastewater Disposal System after Twenty-Five Years of Operation

1987 ◽  
Vol 19 (5-6) ◽  
pp. 701-710 ◽  
Author(s):  
B. L. Reidy ◽  
G. W. Samson
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Wastewater Disposal ◽  
Industrial Base ◽  
Industrial Wastewaters ◽  
The Past ◽  
Gasification Process ◽  
Appropriate Treatment ◽  
Environmentally Safe ◽  
Coal Resource

A low-cost wastewater disposal system was commissioned in 1959 to treat domestic and industrial wastewaters generated in the Latrobe River valley in the province of Gippsland, within the State of Victoria, Australia (Figure 1). The Latrobe Valley is the centre for large-scale generation of electricity and for the production of pulp and paper. In addition other industries have utilized the brown coal resource of the region e.g. gasification process and char production. Consequently, industrial wastewaters have been dominant in the disposal system for the past twenty-five years. The mixed industrial-domestic wastewaters were to be transported some eighty kilometres to be treated and disposed of by irrigation to land. Several important lessons have been learnt during twenty-five years of operating this system. Firstly the composition of the mixed waste stream has varied significantly with the passage of time and the development of the industrial base in the Valley, so that what was appropriate treatment in 1959 is not necessarily acceptable in 1985. Secondly the magnitude of adverse environmental impacts engendered by this low-cost disposal procedure was not imagined when the proposal was implemented. As a consequence, clean-up procedures which could remedy the adverse effects of twenty-five years of impact are likely to be costly. The question then may be asked - when the total costs including rehabilitation are considered, is there really a low-cost solution for environmentally safe disposal of complex wastewater streams?

Overview of Current Phosphoric Acid Production Processes and a New Idea of Kiln Method

2020 ◽  
Vol 17 ◽  
Author(s):  
Guangya Zheng ◽  
Jupei Xia ◽  
Zhengjie Chen
Keyword(s):  
Phosphoric Acid ◽  
Acid Production ◽  
Phosphate Rock ◽  
Low Grade ◽  
Production Methods ◽  
Production Processes ◽  
Major Equipment ◽  
Development Prospects ◽  
Great Competitiveness

: China primarily contains medium and low-grade phosphorus ores that are used to produce phosphoric acid. Here, we provide an overview of phosphoric acid production processes, including wet, thermal, and kiln methods, as well as the fundamental principles, major equipment, and technological aspects of each process. Progress in the kiln method using lowgrade phosphate rock is described, which involves the KPA and CDK processes. The literature shows that the addition of admixtures adds great competitiveness to kiln phosphate production methods and has considerable development prospects.

Upcoming Drifts In Bio-Similars

2020 ◽  
Vol 15 ◽  
Author(s):  
Geeta Aggarwal ◽  
Manju Nagpal ◽  
Ameya Sharma ◽  
Vivek Puri ◽  
Gitika Arora Dhingra
Keyword(s):  
Metabolic Diseases ◽  
Market Competition ◽  
Current Status ◽  
Medicinal Products ◽  
The Past ◽  
Biologic Activity ◽  
Emerging Trends ◽  
Regulatory Guidelines ◽  
Food Drug Administration ◽  
Insight Into

Background: Biopharmaceuticals such as Biologic medicinal products have been in clinical use over the past three decades and have benefited towards the therapy of degenerative and critical metabolic diseases. It is forecasted that market of biologics will be going to increase at a rate of 20% per year, and by 2025, more than ˃ 50% of new drug approvals may be biological products. The increasing utilization of the biologics necessitates for cost control, especially for innovators products that have enjoyed a lengthy period of exclusive use. As the first wave of biopharmaceuticals is expired or set to expire, it has led to various opportunities for the expansion of bio-similars i.e. copied versions of original biologics with same biologic activity. Development of biosimilars is expected to promote market competition, meet worldwide demand, sustain the healthcare systems and maintain the incentives for innovation. Methods: Appraisal of published articles from peer reviewed journals, PubMed literature, latest news and guidelines from European Medicine Agency, US Food Drug Administration (FDA) and India are used to identify data for review. Results: Main insight into the quality requirements concerning biologics, current status of regulation of biosimilars and upcoming challenges lying ahead for the upgrading of marketing authorization of bio-similars has been incorporated. Compiled literature on therapeutic status, regulatory guidelines and the emerging trends and opportunities of biosimilars has been thoroughly stated. Conclusion: Updates on biosimilars will support to investigate the possible impact of bio-similars on healthcare market.

Economic Consequences of War

1943 ◽  
Vol 3 (S1) ◽  
pp. 1-8
Author(s):  
Curtis P. Nettels
Keyword(s):  
Low Cost ◽  
Economic Consequences ◽  
Competitive Advantages ◽  
Competitive Position ◽  
The Past ◽  
History Of ◽  
Costs Of Production ◽  
Foreign Competitors

One influence of war has repeatedly asserted itself in the past—an effect on the costs of production and on the competitive position of the industries and firms of victorious or neutral nations. This subject needs more study, but certain facts suggest a hypothesis, of three parts. First: war expands some industries or concerns, increases their efficiency, enables them to operate, at the end of the struggle, on a comparatively low-cost basis, intensifies their competitive advantages, and improves their position in relation to foreign competitors. Second: war—for the duration—bolsters up some high-cost units by enabling them to sell at a profit all they can produce. The end of the war places such high-cost units at a disadvantage in the process of absorbing the shocks of the transition to a peacetime economy. Third: the history of postwar periods usually exhibits a sharp contest between such low-cost and high-cost enterprises. While “low cost” and “high cost” may refer to the relative positions of units within the same country, in most of this discussion, the terms will be applied to the producers of one country (either victor or neutral) to mean that their costs are low or high in comparison with those of their foreign competitors.

scholarly journals Normative Aspects of Nudging in the International Sphere

AJIL Unbound ◽  
2021 ◽  
Vol 115 ◽  
pp. 263-267
Author(s):  
Doron Teichman ◽  
Eyal Zamir
Keyword(s):  
Energy Consumption ◽  
Organ Donation ◽  
Low Cost ◽  
National Level ◽  
The Past ◽  
The People ◽  
Posthumous Organ Donation ◽  
Regulatory Problems

The use of nudges—“low-cost, choice-preserving, behaviorally informed approaches to regulatory problems”—has become quite popular at the national level in the past decade or so. Examples include changing the default concerning employees’ saving for retirement in a bid to encourage such saving; altering the default about consent to posthumous organ donation to increase the supply of organs for transplantation; and informing people about other people's energy consumption to spur them to reduce theirs. Nudges are therefore used to promote the welfare of the people being nudged, and of society at large. However, the use of nudges has sparked a lively normative debate. When turning to the international arena, new arguments for and against nudges can be raised. This essay focuses on the normative aspects of using nudges in the international arena.

Sign in / Sign up

Export Citation Format

Share Document