Effect of Poly (Lactic–Co–Glycolic Acid) (75:25)/ Hydroxyapatite Composite on Chondrocyte Culture for Tissue Reconstruction

2007 ◽  
Vol 342-343 ◽  
pp. 353-356 ◽  
Author(s):  
Jung Bok Lee ◽  
Seong Mi Yu ◽  
Sang Gil Lee ◽  
Jae Bong Choi ◽  
Jeong Koo Kim
Keyword(s):  
Composite Film ◽  
Cell Attachment ◽  
Composite Films ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Control Group ◽  
Cellular Attachment ◽  
Control Film ◽  
Content Ratio

PLGA (75:25)/hydroxyapatite (HA) composite films were fabricated by solvent-casting method to investigate the effect of various hydroxyapatite content ratio to the PLGA film for cellular attachment and proliferation. Mechanical property of the composite film was characterized by tensile test. The ultimate tensile strength of 10% HA content film was two folds higher than control group. The surface of the film was characterized by contact angle measurement. The PLGA/HA composite film was more hydrophilic than control film. In vitro chondrocyte responses to the composite films were measured by cellular attachment and proliferation test. The attached and proliferated cells were significantly higher on PLGA/HA (10%) composite film than control group (1.44 times higher in attachment test and 1.31 times higher for 6th-day at culture in proliferation assaying, p<0.05). Base on these finding, the PLGA/HA (10%) composite was effective for the cell attachment for the initial stage of cultivation and cell proliferation.

scholarly journals Biological efficacy of perpendicular type-I collagen protruded from TiO2-nanotubes

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Chia-Yu Chen ◽  
David. M. Kim ◽  
Cliff Lee ◽  
John Da Silva ◽  
Shigemi Nagai ◽  
...  
Keyword(s):  
Platelet Activation ◽  
Type I Collagen ◽  
Cell Attachment ◽  
In Vitro Study ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Type I ◽  
Nih3t3 Cells ◽  
Biological Efficacy

AbstractThe aim of this study was to evaluate the biological efficacy of a unique perpendicular protrusion of type-I collagen (Col-I) from TiO2 nanotubes (NT-EPF surface). We hypothesized that the NT-EPF surface would play bifunctional roles in stimulating platelet-mediated fibroblast recruitment and anchoring fibroblast-derived Col-I to form a perpendicular collagen assembly, mimicking the connective tissue attachment around natural teeth for the long-term maintenance of dental implants. Ti surface modification was accomplished in two steps. First, TiO2 nanotubes (NT) array was fabricated via anodization. Diameters and depths of NTs were controlled by applied voltage and duration. Subsequently, an electrophoretic fusion (EPF) method was applied to fuse Col-I into nanotube arrays in a perpendicular fashion. Surface wettability was assessed by contact angle measurement. The bioactivity of modified TiO2 surfaces was evaluated in terms of NIH3T3 fibroblast attachment, platelet activation, and collagen extension. Early attachment, aggregation, and activation of platelets as well as release of platelet-related growth factors were demonstrated on NT-EPF surfaces. Platelet-mediated NIH3T3 cells migration toward NT-EPF was significantly increased and the attached cells showed a typical fibrous morphology with elongated spindle shape. A direct linkage between pseudopod-like processes of fibroblasts to NT-EPF surfaces was observed. Furthermore, the engineered EPF collagen protrusion linked with cell-derived collagen in a perpendicular fashion. Within the limitation of this in vitro study, the TiO2 nanotube with perpendicular Col-I surface (NT-EPF) promoted better cell attachment, induced a strong platelet activation which suggested the ability to create a more robust soft tissue seal.

Tailoring the in vitro characteristics of poly(vinyl alcohol)-nanohydroxyapatite composite scaffolds for bone tissue engineering

2016 ◽  
Vol 36 (8) ◽  
pp. 771-784 ◽  
Author(s):  
Tejinder Kaur ◽  
Arunachalam Thirugnanam ◽  
Krishna Pramanik
Keyword(s):  
Mechanical Strength ◽  
Vinyl Alcohol ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Poly Vinyl Alcohol ◽  
Apatite Formation ◽  
Composite Scaffolds ◽  
Alizarin Red ◽  
Casting Technique

Abstract Poly(vinyl alcohol) reinforced with nanohydroxyapatite (PVA-nHA) composite scaffolds were developed by varying the nHA (1%, 2%, 3%, 4%, and 5%, w/v) composition in the PVA matrix by solvent casting technique. The developed composite scaffolds were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and contact angle measurement. The stability of the composite scaffolds in physiological environment was evaluated by swelling and degradation studies. Further, these composite scaffolds were tested for in vitro bioactivity, hemolysis, biocompatibility, and mechanical strength. SEM micrographs showed a homogenous distribution of nHA (3%, w/v) in the PVA matrix. XRD and ATR-FTIR analysis confirmed no phase contamination and the existence of the chemical bond between PVA-nHA at approximately 2474 cm-1. PVA-nHA composite scaffolds with 3% (w/v) concentration of nHA showed nominal swelling and degradation behavior with good mechanical strength. The mechanical strength and degradation properties of the scaffold above 3% (w/v) of nHA was found to deteriorate, which is due to the agglomeration of nHA. The in vitro bioactivity and hemolysis studies showed improved apatite formation and hemocompatibility of the developed scaffolds. In vitro cell adhesion, proliferation, alkaline phosphatase activity, and Alizarin red S staining confirmed the biocompatibility of the composite scaffolds.

scholarly journals Biological characterization of implant surfaces - in vitro study

2015 ◽  
Vol 44 (4) ◽  
pp. 195-199 ◽  
Author(s):  
Priscilla Barbosa Ferreira Soares ◽  
Camilla Christian Gomes Moura ◽  
Huberth Alexandre da Rocha Júnior ◽  
Paula Dechichi ◽  
Darceny Zanetta-Barbosa
Keyword(s):  
Alkaline Phosphatase ◽  
Cell Viability ◽  
Total Protein ◽  
Cell Attachment ◽  
Control Group ◽  
Mitochondrial Activity ◽  
Serum Total Protein ◽  
Trypan Blue Exclusion ◽  
Experimental Surface

<title>Abstract</title><sec><title>Objective</title><p>Evaluate the biological performance of titanium alloys grade IV under different surface treatments: sandblasting and double etching (Experimental surface 1; Exp1, NEODENT); surface with wettability increase (Experimental surface 2; Exp2, NEODENT) on response of preliminary differentiation and cell maturation.</p></sec><sec><title>Material and method</title><p>Immortalized osteoblast cells were plated on Exp1 and Exp2 titanium discs. The polystyrene plate surface without disc was used as control group (C). Cell viability was assessed by measuring mitochondrial activity (MTT) at 4 and 24 h (n = 5), cell attachment was performed using trypan blue exclusion within 4 hours (n = 5), serum total protein and alkaline phosphatase normalization was performed at 4, 7 and 14 days (n = 5). Data were analyzed using one-way ANOVA and Tukey test.</p></sec><sec><title>Result</title><p>The values of cell viability were: 4h: C– 0.32±0.01<sup>A</sup>; Exp1– 0.34±0.08<sup>A</sup>; Exp2– 0.29±0.03<sup>A</sup>. 24h: C– 0.43±0.02<sup>A</sup>; Exp1– 0.39±0.01<sup>A</sup>; Exp2– 0.37±0.03<sup>A</sup>. The cell adhesion counting was: C– 85±10<sup>A</sup>; Exp1- 35±5<sup>B</sup>; Exp2– 20±2<sup>B</sup>. The amounts of serum total protein were 4d: C– 40±2<sup>B</sup>; Exp1– 120±10<sup>A</sup>; Exp2– 130±20<sup>A</sup>. 7d: C– 38±2<sup>B</sup>; Exp1– 75±4<sup>A</sup>; Exp2– 70±6<sup>A</sup>. 14 d: C– 100±3<sup>A</sup>; Exp1– 130±5<sup>A</sup>; Exp2– 137±9<sup>A</sup>. The values of alkaline phosphatase normalization were: 4d: C– 2.0±0.1<sup>C</sup>; Exp1– 5.1±0.8<sup>B</sup>; Exp2– 9.8±2.0<sup>A</sup>. 7d: C– 1.0±0.01<sup>C</sup>; Exp1– 5.3±0.5<sup>A</sup>; Exp2– 3.0±0.3<sup>B</sup>. 14 d: C– 4.1±0.3<sup>A</sup>; Exp1– 4.4±0.8<sup>A</sup>; Exp2– 2.2±0.2<sup>B</sup>. Different letters related to statistical differences.</p></sec><sec><title>Conclusion</title><p>The surfaces tested exhibit different behavior at dosage of alkaline phosphatase normalization showing that the Exp2 is more associated with induction of cell differentiation process and that Exp1 is more related to the mineralization process.</p></sec>

Fabrication and characterization of customized tubular scaffolds for tracheal tissue engineering by using solvent based 3D printing on predefined template

2021 ◽  
Vol 27 (2) ◽  
pp. 421-428
Author(s):  
Rudranarayan Kandi ◽  
Pulak Mohan Pandey ◽  
Misba Majood ◽  
Sujata Mohanty
Keyword(s):  
Tissue Engineering ◽  
Cell Adhesion ◽  
3D Printing ◽  
Chemical Properties ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
In Vitro Cytotoxicity ◽  
Content Type ◽  
Tracheal Tissue

Purpose This paper aims to discuss the successful fabrication of customized tubular scaffolds for tracheal tissue engineering with a novel route using solvent-based extrusion 3D printing. Design/methodology/approach The manufacturing approach involved extrusion of polymeric ink over a rotating predefined pattern to construct customized tubular structure of polycaprolactone (PCL) and polyurethane (PU). Dimensional deviation in thickness of scaffolds were calculated for various layer thicknesses of 3D printing. Physical and chemical properties of scaffolds were investigated by scanning electron microscope (SEM), contact angle measurement, Fourier Transform Infrared Spectroscopy (FTIR) and X-ray diffraction (XRD). Mechanical characterizations were performed, and the results were compared to the reported properties of human native trachea from previous reports. Additionally, in vitro cytotoxicity of the fabricated scaffolds was studied in terms of cell proliferation, cell adhesion and hemagglutination assay. Findings The developed fabrication route was flexible and accurate by printing customized tubular scaffolds of various scales. Physiochemical results showed good miscibility of PCL/PU blend, and decrease in crystalline nature of blend with the addition of PU. Preliminary mechanical assessments illustrated comparable mechanical properties with the native human trachea. Longitudinal compression test reported outstanding strength and flexibility to maintain an unobstructed lumen, necessary for the patency. Furthermore, the scaffolds were found to be biocompatible to promote cell adhesion and proliferation from the in vitro cytotoxicity results. Practical implications The attempt can potentially meet the demand for flexible tubular scaffolds that ease the concerns such as availability of suitable organ donors. Originality/value 3D printing over accurate predefined templates to fabricate customized grafts gives novelty to the present method. Various customized scaffolds were compared with conventional cylindrical scaffold in terms of flexibility.

Limitations of In-Vitro Labeling of Endothelial Cells with Indium-111 Oxine

1995 ◽  
Vol 4 (3) ◽  
pp. 291-296 ◽  
Author(s):  
H.M.H. Carr ◽  
J.V. Smyth ◽  
O.B. Rooney ◽  
P.D. Dodd ◽  
H. Sharma ◽  
...  
Keyword(s):  
Endothelial Cells ◽  
Endothelial Cell ◽  
Cell Attachment ◽  
Control Group ◽  
Vascular Prostheses ◽  
Long Term Effect ◽  
Indium 111 ◽  
Suitable Technique

Indium-111 oxine labeling is widely used as a marker of endothelial cell attachment to vascular prostheses. The long term effect of labeling human adult endothelial cells (HAECs) with this isotope has not been determined. In this study the viability of labeled HAECs, leakage of isotope from labeled cells and adherence of circulating isotope to fibronectin coated prostheses were investigated over 24 h. The effect of incubation time on labeling efficiency was also assessed. There were significant differences in cell viability between the labeled and unlabeled groups beyond 4 h (p < 0.005, 2-tailed, unpaired t-test). In the control group cell numbers increased by 42% while in the labeled group this had decreased by 20% at 24 h. Spontaneous leakage increased with time but was maximal in the first 2 h. Adherence of circulating isotope to fibronectin coated expanded polytetrafluoroethylene (ePTFE) grafts was minimal but was significantly greater to gelatin impregnated Dacron (GEL-SEAL) beyond 1 hour (p < 0.05). Incubation times greater than 5 minutes during labeling do not significantly improve labeling efficiency, and may contribute to toxicity by prolonging exposure to oxine. Indium-111 oxine labeling of HAECs is a suitable technique for acute studies of endothelial cell kinetics up to 4 h, but its use in chronic studies may lead to significant underestimations of cell retention.

In Vitro Human Osteoblast Responses to Titanium Oxide-Based Surfaces with Varying Topology and Composition

2009 ◽  
Vol 1187 ◽  
Author(s):  
Charles Andrew Collier ◽  
Julien M. Paillard ◽  
Athina E. Markaki ◽  
James A. Curran ◽  
Helen J Griffiths ◽  
...  
Keyword(s):  
Titanium Oxide ◽  
Cellular Proliferation ◽  
Surface Characteristics ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Surface Topology ◽  
Implant Design ◽  
Cell Responses ◽  
Alp Activity

AbstractThe surface topology and composition of prosthetic implant materials affect cell responses and are therefore important design features. Plasma electrolytic oxidation (PEO) is a surface modification technique that can be used to produce oxidized surfaces with various surface properties. In this work, Ti-6Al-4V was PEO processed to give two surfaces with different morphologies but similar chemical composition. Surface characteristics were assessed using X ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, stylus profilometry and contact angle measurement.In vitro culture of human foetal osteoblasts (HOB) was performed on the surfaces, to examine cell responses to them. Cellular proliferation, morphology and differentiation were examined, using the AlamarBlue assay, SEM imaging and an alkaline phosphatase (ALP) activity assay respectively. Additionally, the individual effects of oxides present in the PEO processed surfaces (rutile and anatase) on the cells were examined, by binding them in powder form to produce surfaces with similar morphology, but different composition.Changes in the topology and chemistry of the surfaces affected osteoblast response. HOB proliferated more on the rougher PEO surface, and also displayed greater ALP activity. Also, cells responded differently to surfaces containing just rutile or anatase, indicating that the chemical phase of titanium oxide is of consequence for implant design.

scholarly journals Temporary Wettability Tuning of PCL/PDMS Micro Pattern Using the Plasma Treatments

Materials ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 644 ◽  
Author(s):  
Wei-Chih Lin ◽  
Nur Mohd Razali
Keyword(s):  
Cell Attachment ◽  
Fibroblast Cell ◽  
Cell Types ◽  
Contact Angle Measurement ◽  
Mouse Embryonic Fibroblast ◽  
Angle Measurement ◽  
Surface Wettability ◽  
Pdms Surface ◽  
Primary Mouse ◽  
Micro Pattern

Surface wettability plays an important role in determining the function of a wound dressing. Dressings with hydrophobic surfaces are suitable for bacterial adsorption, however, a hydrophilic surface is needed to improve cell attachment for most anchorage-dependent cell types. Furthermore, the hydrophobicity/hydrophilicity of the surface can be used to direct cellular processes such as cell initial attachment, adhesion, and migration during wound healing. Thus, a surface with an ability to switch their surface wettability improves the practicality of the dressing. In this study, we propose a temporary surface wettability tuning for surface patterning utilizing plasma treatment. Polycaprolactone (PCL) and polydimethylsiloxane (PDMS) surfaces were treated with tetrafluoromethane (CF4), sulphur hexafluoride (SF6), and oxygen (O2) plasma, and the effects on the surface wettability, roughness, and chemical composition were investigated. Based on the contact angle measurement, CF4 plasma altered surface wettability of PCL and PDMS films to hydrophobic and hydrophilic, respectively. After CF4 treatment, better attachment of primary mouse embryonic fibroblast cell (3T3) was observed on the treated PDMS surface. Embedding PCL into PDMS generated a hydrophobic-hydrophilic pattern mixture surface, which offers great potential in the tissue engineering field such as cell patterning and guidance.

scholarly journals Characterization and Antimicrobial Activity of Biodegradable Active Packaging Enriched with Clove and Thyme Essential Oil for Food Packaging Application

Foods ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1117
Author(s):  
Shubham Sharma ◽  
Sandra Barkauskaite ◽  
Brendan Duffy ◽  
Amit K. Jaiswal ◽  
Swarna Jaiswal
Keyword(s):  
Antimicrobial Activity ◽  
Composite Film ◽  
Food Packaging ◽  
Antimicrobial Agents ◽  
Composite Films ◽  
Clove Oil ◽  
Thyme Oil ◽  
Uv Blocking ◽  
Control Film ◽  
Active Food Packaging

Bioactive packaging contains natural antimicrobial agents, which inhibit the growth of microorganisms and increase the food shelf life. Solvent casting method was used to prepare the Poly (lactide)-Poly (butylene adipate-co-terephthalate) (PLA-PBAT) film incorporated with the thyme oil and clove oil in various concentrations (1 wt%, 5 wt% and 10 wt%). The clove oil composite films depicted less green and more yellow as compared to thyme oil composite films. Clove oil composite film has shown an 80% increase in the UV blocking efficiency. The tensile strength (TS) of thyme oil and clove oil composite film decreases from 1.35 MPs (control film) to 0.96 MPa and 0.79, respectively. A complete killing of S. aureus that is a reduction from 6.5 log CFU/mL to 0 log CFU/mL was observed on the 10 wt% clove oil incorporated composite film. Clove oil and thyme oil composite film had inhibited E. coli biofilm by 93.43% and 82.30%, respectively. Clove oil composite film had exhibited UV blocking properties, strong antimicrobial activity and has high potential to be used as an active food packaging.

scholarly journals A durable and biocompatible ascorbic acid-based covalent coating method of polydimethylsiloxane for dynamic cell culture

2017 ◽  
Vol 14 (132) ◽  
pp. 20170318 ◽  
Author(s):  
Joni Leivo ◽  
Sanni Virjula ◽  
Sari Vanhatupa ◽  
Kimmo Kartasalo ◽  
Joose Kreutzer ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Cell Attachment ◽  
Collagen Type I ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Type I ◽  
Simple Method ◽  
Dynamic Conditions ◽  
Coating Method ◽  
Cross Linker

Polydimethylsiloxane (PDMS) is widely used in dynamic biological microfluidic applications. As a highly hydrophobic material, native PDMS does not support cell attachment and culture, especially in dynamic conditions. Previous covalent coating methods use glutaraldehyde (GA) which, however, is cytotoxic. This paper introduces a novel and simple method for binding collagen type I covalently on PDMS using ascorbic acid (AA) as a cross-linker instead of GA. We compare the novel method against physisorption and GA cross-linker-based methods. The coatings are characterized by immunostaining, contact angle measurement, atomic force microscopy and infrared spectroscopy, and evaluated in static and stretched human adipose stem cell (hASC) cultures up to 13 days. We found that AA can replace GA as a cross-linker in the covalent coating method and that the coating is durable after sonication and after 6 days of stretching. Furthermore, we show that hASCs attach and proliferate better on AA cross-linked samples compared with physisorbed or GA-based methods. Thus, in this paper, we provide a new PDMS coating method for studying cells, such as hASCs, in static and dynamic conditions. The proposed method is an important step in the development of PDMS-based devices in cell and tissue engineering applications.

scholarly journals Comparison of the Effect of Sol-Gel and Coprecipitation Routes on the Properties and Behavior of Nanocomposite Chitosan-Bioactive Glass Membranes for Bone Tissue Engineering

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Elke M. F. Lemos ◽  
Sandhra M. Carvalho ◽  
Patrícia S. O. Patrício ◽  
Claudio L. Donnici ◽  
Marivalda M. Pereira
Keyword(s):  
Tissue Engineering ◽  
Cell Viability ◽  
Bioactive Glass ◽  
Bone Regeneration ◽  
Sol Gel ◽  
Composite Films ◽  
Maximum Tensile Stress ◽  
Control Group ◽  
Nanoparticle Dispersion

Recent studies in tissue engineering have highlighted the importance of the development of composite materials based on biodegradable polymers containing bioactive glasses, in particular, composites for high load support and excellent cell viability for potential application in bone regeneration. In this work, hybrid composite films were obtained by combining chitosan with bioactive glass in solution form and in nanoparticle dispersion form obtained by the two different synthesis routes: the sol-gel method and coprecipitation. The bioactive glass served both as a mechanical reinforcing agent and as a triggering agent with high bioactivity. The results ofin vitroassays with simulated body fluid demonstrated the formation of a significant layer of fibrils on the surface of the film, with a typical morphology of carbonated hydroxyapatite, reflecting induction of a favorable bioactivity. Maximum tensile stress increased from 42 to 80 MPa to the sample with 5% wt bioactive glass. In addition, samples containing 5% and 10% wt bioactive glass showed a significant increase in cell viability, 18 and 30% increase compared to the control group. The samples showed significant response, indicating that they could be a potential material for use in bone regeneration through tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document