Design and Implementation of a High Accuracy Interpolation Encoder IC for Magnetic Sensor

2019 ◽  
Author(s):  
Wen-Yu Chen ◽  
Yi-Feng Zhang ◽  
Paul C.-P. Chao ◽  
Eka Fitrah Pribadi
Keyword(s):  
Measurement System ◽  
Noise Immunity ◽  
Supply Voltage ◽  
High Accuracy ◽  
Cmos Process ◽  
Specific Method ◽  
Clock Frequency ◽  
Design And Implementation ◽  
Equal Distance ◽  
Interpolation Technique

Abstract The magnetic encoder (ME) always employs sensor passing through periodic and equal distance grating and then generates periodic quadrature scaling signals for displacement measurement. The phase is relative to the movement. To improve encoder accuracy or resolution, electronic interpolation technique had been developed to subdivide the phase of quadrature scaling signals. According to the trends, this paper proposed a specific method with excellent noise immunity characteristic and a complete calibration process to improve the accuracy of the system. The designed circuit is taped-out using TSMC 0.18-μm CMOS process, where the active area is 1643 μm × 1676 μm. The chip has the specification of 3.3 V supply voltage, 20 MHz clock frequency, and 0.0859 mW power consumption. The accuracy of the measurement system is 1.065um.

scholarly journals Design Strategies and Architectures for Ultra-Low-Voltage Delta-Sigma ADCs

Electronics ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 1156
Author(s):  
Lorenzo Benvenuti ◽  
Alessandro Catania ◽  
Giuseppe Manfredini ◽  
Andrea Ria ◽  
Massimo Piotto ◽  
...  
Keyword(s):  
Low Voltage ◽  
Flicker Noise ◽  
Supply Voltage ◽  
Cmos Process ◽  
Clock Frequency ◽  
Design Environment ◽  
Ultra Low Power ◽  
Analog Cmos ◽  
Gain Error ◽  
Dc Gain

The design of ultra-low voltage analog CMOS integrated circuits requires ad hoc solutions to counteract the severe limitations introduced by the reduced voltage headroom. A popular approach is represented by inverter-based topologies, which however may suffer from reduced finite DC gain, thus limiting the accuracy and the resolutions of pivotal circuits like analog-to-digital converters. In this work, we discuss the effects of finite DC gain on ultra-low voltage ΔΣ modulators, focusing on the converter gain error. We propose an ultra-low voltage, ultra-low power, inverter-based ΔΣ modulator with reduced finite-DC-gain sensitivity. The modulator employs a two-stage, high DC-gain, switched-capacitor integrator that applies a correlated double sampling technique for offset cancellation and flicker noise reduction; it also makes use of an amplifier that implements a novel common-mode stabilization loop. The modulator was designed with the UMC 0.18 μm CMOS process to operate with a supply voltage of 0.3 V. It was validated by means of electrical simulations using the CadenceTM design environment. The achieved SNDR was 73 dB, with a bandwidth of 640 Hz, and a clock frequency of 164 kHz, consuming only 200.5 nW. It achieves a Schreier Figure of Merit of 168.1 dB. The proposed modulator is also able to work with lower supply voltages down to 0.15 V with the same resolution and a lower power consumption despite of a lower bandwidth. These characteristics make this design very appealing in sensor interfaces powered by energy harvesting sources.

scholarly journals A Novel Ultrasonic TOF Ranging System Using AlN Based PMUTs

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 284
Author(s):  
Yihsiang Chiu ◽  
Chen Wang ◽  
Dan Gong ◽  
Nan Li ◽  
Shenglin Ma ◽  
...  
Keyword(s):  
Clock Cycle ◽  
High Accuracy ◽  
Ultrasonic Waves ◽  
Oxide Semiconductor ◽  
Average Error ◽  
Cmos Process ◽  
Clock Frequency ◽  
Time Frequency ◽  
Range Finding ◽  
Wide Range

This paper presents a high-accuracy complementary metal oxide semiconductor (CMOS) driven ultrasonic ranging system based on air coupled aluminum nitride (AlN) based piezoelectric micromachined ultrasonic transducers (PMUTs) using time of flight (TOF). The mode shape and the time-frequency characteristics of PMUTs are simulated and analyzed. Two pieces of PMUTs with a frequency of 97 kHz and 96 kHz are applied. One is used to transmit and the other is used to receive ultrasonic waves. The Time to Digital Converter circuit (TDC), correlating the clock frequency with sound velocity, is utilized for range finding via TOF calculated from the system clock cycle. An application specific integrated circuit (ASIC) chip is designed and fabricated on a 0.18 μm CMOS process to acquire data from the PMUT. Compared to state of the art, the developed ranging system features a wide range and high accuracy, which allows to measure the range of 50 cm with an average error of 0.63 mm. AlN based PMUT is a promising candidate for an integrated portable ranging system.

The Design and Implementation of Ship Electric Field Measurement System Based on MSP430

2012 ◽  
Vol 622-623 ◽  
pp. 1378-1383
Author(s):  
Peng Han ◽  
Yang Li
Keyword(s):  
Electric Field ◽  
Measurement System ◽  
Field Measurement ◽  
High Accuracy ◽  
Low Power Consumption ◽  
Electric Field Measurement ◽  
Low Snr ◽  
Design And Implementation ◽  
Key Technologies ◽  
Software And Hardware

The ship electric field has become a new physical field which is widely concerned at home and abroad in recent years. For the research of ship electric field, one of the most effective methods is to measure it underwater. According to the analysis of ship electric field signal’s characteristics, the ship electric field measurement system based on MSP430F149 was designed and the key technologies of software and hardware were also presented in this paper. The results of experiment demonstrated that the system could effectively measure the ship electric field signal in a low SNR. Meanwhile, it has the advantages of low power consumption, high accuracy and credible.

scholarly journals A 6-Locking Cycles All-Digital Duty Cycle Corrector with Synchronous Input Clock

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 860
Author(s):  
Shao-Ku Kao
Keyword(s):  
Duty Cycle ◽  
Delay Line ◽  
Supply Voltage ◽  
Cmos Process ◽  
Delay Lines ◽  
Clock Frequency ◽  
Quantization Method ◽  
Total Delay ◽  
Chip Area ◽  
Measurement Results

This paper proposes an all-digital duty cycle corrector with synchronous fast locking, and adopts a new quantization method to effectively produce a phase of 180 degrees or half delay of the input clock. By taking two adjacent rising edges input to two delay lines, the total delay time of the delay line is twice the other delay line. This circuit uses a 0.18 μm CMOS process, and the overall chip area is 0.0613 mm2, while the input clock frequency is 500 MHz to 1000 MHz, and the acceptable input clock duty cycle range is 20% to 80%. Measurement results show that the output clock duty cycle is 50% ± 2.5% at a supply voltage of 1.8 V operating at 1000 MHz, the power consumed is 10.1 mW, with peak-to-peak jitter of 9.89 ps.

Integral Type Multi-Ramp for Single-Slope ADC

2013 ◽  
Vol 303-306 ◽  
pp. 1908-1912 ◽  
Author(s):  
Nan Lyu ◽  
Ning Mei Yu ◽  
He Jiu Zhang
Keyword(s):  
Power Consumption ◽  
High Speed ◽  
Supply Voltage ◽  
High Accuracy ◽  
Sampling Frequency ◽  
Cmos Process ◽  
Voltage Reference ◽  
Integral Type ◽  
Power Supply Voltage ◽  
The One

This paper presents a integral type Multi-ramp architecture apply to MRSS ADC (Multiple-ramp single-slope ADC).On the one hand to improve the capacitance mismatch by change voltage reference, On the other hand to reduced the power consumption greatly. Implemented in the GSMC 180nm 2P4M CMOS process, in the power supply voltage of 1.8 V, 11-bit resolution, 10 MHZ sampling frequency, the result of max power consumption is 1.33mW of single unit .The DNL < 0.1LSB and max INL < 0.49LSB .The Multi-ramp achieved requirements for high speed and high accuracy MRSS ADC.

64-BIT PIPELINE CARRY LOOKAHEAD ADDER USING ALL-N-TRANSISTOR TSPC LOGICS

2006 ◽  
Vol 15 (01) ◽  
pp. 13-27 ◽  
Author(s):  
KUO-HSING CHENG ◽  
SHUN-WEN CHENG ◽  
WEN-SHIUAN LEE
Keyword(s):  
Supply Voltage ◽  
Internal Node ◽  
Cmos Process ◽  
Clock Frequency ◽  
Mos Transistors ◽  
Power Performance ◽  
Process Technology ◽  
Operation Speed ◽  
Circuit Techniques ◽  
Full Swing

This paper proposes two improved circuit techniques of True Single-Phase Clocking (TSPC) logic, which called Nonfull Swing TSPC (NSTSPC) and All-N-TSPC (ANTSPC). The voltage of internal node of the NSTSPC is not full swing; it saves partial dynamic power dissipation. And the ANTSPC uses NMOS transistors to replace PMOS transistors, the output loading of Φ-section is therefore reduced and a higher layout density is obtained. Through postlayout simulation comparisons between number of stacked MOS transistors and delay time, and supply voltage vs maximum frequency, the proposed NSTSPC and ANTSPC circuits show better operation speed and power performance than the conventional TSPC circuit. Finally, the new TSPC circuits are applied to a 64-bit hierarchical pipeline Carry Lookahead Adder (CLA), which based on TSMC 0.35 μm CMOS process technology. By using the techniques of NSTSPC and ANTSPC alternately, the 64-bit CLA is successfully implemented as a pipelined structure. The results of post-layout simulation show that the 64-bit CLA can be operated on 1.25 GHz clock frequency and its power/maximal frequency ratio is 151.4 μW/MHz.

DESIGN OF AN AREA-EFFICIENT HIGH-THROUGHPUT SHIFT-BASED LDPC DECODER

2013 ◽  
Vol 22 (06) ◽  
pp. 1350039 ◽  
Author(s):  
Yun-Ching Tang ◽  
Hong-Ren Wang ◽  
Hongchin Lin ◽  
Jun-Zhe Huang
Keyword(s):  
High Throughput ◽  
Supply Voltage ◽  
Critical Path ◽  
Cmos Process ◽  
Path Delay ◽  
Clock Frequency ◽  
Storage Unit ◽  
Ldpc Decoder ◽  
Routing Congestion ◽  
Area Efficient

An area-efficient high-throughput shift-based LDPC decoder architecture is proposed. The specially designed (512, 1,024) parity-check matrix is effective for partial parallel decoding by the min-sum algorithm (MSA). To increase throughput during decoding, two data frames are fed into the decoder to minimize idle time of the check node unit (CNU) and the variable node unit (VNU). Thus, the throughput is increased to almost two-fold. Unlike the conventional architecture, the message storage unit contains shift registers instead of de-multiplexers and registers. Therefore, hardware costs are reduced. Routing congestion and critical path delay are also reduced, which increases energy efficiency. An implementation of the proposed decoder using TSMC 0.18 μm CMOS process achieves a decoding throughput of 1.725 Gbps, at a clock frequency of 56 MHz, a supply voltage of 1.8 V, and a core area of 5.18 mm2. The normalized area is smaller and the throughput per normalized power consumption is higher than those reported using the conventional architectures.

scholarly journals Low-Power Highly Robust Resistance-to-Period Converter

Sensors ◽  
2018 ◽  
Vol 19 (1) ◽  
pp. 8
Author(s):  
Luis Álvarez-Simón ◽  
Emmanuel Gómez-Ramírez ◽  
María Sanz-Pascual
Keyword(s):  
Low Power ◽  
Output Signal ◽  
Supply Voltage ◽  
High Accuracy ◽  
Cmos Process ◽  
Temperature Variations ◽  
Signal Variation ◽  
Novel Structure ◽  
Voltage Variation ◽  
Complex Circuits

This paper presents a novel structure of Resistance- to-Period (R-T) Converter highly robust to supply and temperature variations. Robustness is achieved by using the ratiometric approach so that complex circuits or high accuracy voltage references are not necessary. To prove the proposed architecture of R-T converter, a prototype was implemented in a 0.18 μ m CMOS process with a single supply voltage of 1.8 V and without any stable reference voltage. Experimental results show a maximum ±1.5% output signal variation for ±10% supply voltage variation and in a 3–95 ° C temperature range.

scholarly journals A High-Accuracy Ultra-Low-Power Offset-Cancelation On-Off Bandgap Reference for Implantable Medical Electronics

Electronics ◽  
2019 ◽  
Vol 8 (7) ◽  
pp. 814 ◽  
Author(s):  
Jiangtao Xu ◽  
Yawei Wang ◽  
Minshun Wu ◽  
Ruizhi Zhang ◽  
Sufen Wei ◽  
...  
Keyword(s):  
Low Power ◽  
Supply Voltage ◽  
Sampling Strategy ◽  
High Accuracy ◽  
Cmos Process ◽  
Medical Electronics ◽  
Bandgap Reference ◽  
Ultra Low Power ◽  
Voltage Range ◽  
Average Current

An ultra-low-power and high-accuracy on-off bandgap reference (BGR) is demonstrated in this paper for implantable medical electronics. The proposed BGR shows an average current consumption of 78 nA under 2.8 V supply and an output voltage of 1.17 V with an untrimmed accuracy of 0.69%. The on-off bandgap combined with sample-and-hold switched-RC filter is developed to reduce power consumption and noise. The on-off mechanism allows a relatively higher current in the sample phase to alleviate the process variation of bipolar transistors. To compensate the error caused by operational amplifier offset, the correlated double sampling strategy is adopted in the BGR. The proposed BGR is implemented in 0.35 μm standard CMOS process and occupies a total area of 0.063 mm2. Measurement results show that the circuit works properly in the supply voltage range of 1.8–3.2 V and achieves a line regulation of 0.59 mV/V. When the temperature varies from −20 to 80 °C, an average temperature coefficient of 19.6 ppm/°C is achieved.

Sign in / Sign up

Export Citation Format

Share Document