scholarly journals Imaging alveolar-duct geometry during expiration via 3He lung morphometry

2011 ◽  
Vol 110 (5) ◽  
pp. 1448-1454 ◽  
Author(s):  
A. J. Hajari ◽  
D. A. Yablonskiy ◽  
J. D. Quirk ◽  
A. L. Sukstanskii ◽  
R. A. Pierce ◽  
...  

Acinar geometry has been the subject of several morphological and imaging studies in the past; however, surprisingly little is known about how the acinar microstructure changes when the lung inflates or deflates. Lung morphometry with hyperpolarized 3He diffusion MRI allows non-destructive evaluation of lung microstructure and acinar geometry, which has important applications in understanding basic lung physiology and disease. In this study, we have measured the alveolar and acinar duct sizes at physiologically relevant volumes by 3He lung morphometry in six normal, excised, and unfixed canine lungs. Our results imply that, during a 37% decrease in lung volume, the acinar duct radius decreases by 19%, whereas the alveolar depth increases by 9% ( P < 0.0001 and P < 0.05, respectively via paired t-tests with a Bonferroni correction). A comparison to serial sections under the microscope validates the imaging results and opens the door to in vivo human studies of lung acinar geometry and physiology during respiration using 3He lung morphometry.

2019 ◽  
Vol 374 (1783) ◽  
pp. 20190071 ◽  
Author(s):  
Martin J. R. Hall ◽  
Daniel Martín-Vega

Metamorphosis and, in particular, holometaboly, the development of organisms through a series of discrete stages (egg, larva, pupa, adult) that hardly resemble one another but are finely adapted to specific roles in the life cycle of the organism, has fascinated and mystified humans throughout history. However, it can be difficult to visualize the dramatic changes that occur during holometaboly without destructive sampling, traditionally through histology. However, advances in imaging technologies developed mainly for medical sciences have been applied to studies of insect metamorphosis over the past couple of decades. These include micro-computed tomography, magnetic resonance imaging and optical coherence tomography. A major advantage of these techniques is that they are rapid and non-destructive, enabling virtual dissection of an organism in any plane by anyone who has access to the image files and the necessary software. They can also be applied in some cases to visualize metamorphosis in vivo , including the periods of most rapid and dramatic morphological change. This review focusses on visualizing the intra-puparial holometabolous metamorphosis of cyclorraphous flies (Diptera), including the primary model organism for all genetic investigations, Drosophila melanogaster , and the blow flies of medical, veterinary and forensic importance, but also discusses similar studies on other insect orders. This article is part of the theme issue ‘The evolution of complete metamorphosis’.


Author(s):  
K.E. Krizan ◽  
J.E. Laffoon ◽  
M.J. Buckley

With increase use of tissue-integrated prostheses in recent years it is a goal to understand what is happening at the interface between haversion bone and bulk metal. This study uses electron microscopy (EM) techniques to establish parameters for osseointegration (structure and function between bone and nonload-carrying implants) in an animal model. In the past the interface has been evaluated extensively with light microscopy methods. Today researchers are using the EM for ultrastructural studies of the bone tissue and implant responses to an in vivo environment. Under general anesthesia nine adult mongrel dogs received three Brånemark (Nobelpharma) 3.75 × 7 mm titanium implants surgical placed in their left zygomatic arch. After a one year healing period the animals were injected with a routine bone marker (oxytetracycline), euthanized and perfused via aortic cannulation with 3% glutaraldehyde in 0.1M cacodylate buffer pH 7.2. Implants were retrieved en bloc, harvest radiographs made (Fig. 1), and routinely embedded in plastic. Tissue and implants were cut into 300 micron thick wafers, longitudinally to the implant with an Isomet saw and diamond wafering blade [Beuhler] until the center of the implant was reached.


Author(s):  
Ni Made Ridla Parwata

Overtraining syndrome is a decrease in physical capacity, emotions and immunity due to training that is too often without adequate periods of rest. Overtraining is often experienced by athletes who daily undergo heavy training with short break periods. This research aims to look at the effect of overtraining aerobic physical exercise on memory in mice. The research method was experimental in vivo with the subject of adult male rat (Rattus Norvegicus) Winstar strain aged 8-10 weeks, body weight 200-250 gr. Divided into three groups, namely the control group, aerobic group and overtraining group. The results of memory tests with water E Maze showed an increase in the duration of travel time and the number of animal errors made by the overtraining group (p = 0.003). This study concludes that overtraining aerobic physical exercise can reduce memory in rat hippocampus.


2020 ◽  
Vol 2020 (1) ◽  
pp. 34-52
Author(s):  
Rafał Szymański

AbstractThe article is in line with the contemporary interests of companies from the aviation industry. It describes thermoplastic material and inspection techniques used in leading aviation companies. The subject matter of non-destructive testing currently used in aircraft inspections of composite structures is approximated and each of the methods used is briefly described. The characteristics of carbon preimpregnates in thermoplastic matrix are also presented, as well as types of thermoplastic materials and examples of their application in surface ship construction. The advantages, disadvantages and limitations for these materials are listed. The focus was put on the explanation of the ultrasonic method, which is the most commonly used method during the inspection of composite structures at the production and exploitation stage. Describing the ultrasonic method, the focus was put on echo pulse technique and the use of modern Phased Array heads. Incompatibilities most frequently occurring and detected in composite materials with thermosetting and thermoplastic matrix were listed and described. A thermoplastic flat composite panel made of carbon pre-impregnate in a high-temperature matrix (over 300°C), which was the subject of the study, was described. The results of non-destructive testing (ultrasonic method) of thermoplastic panel were presented and conclusions were drawn.


1997 ◽  
Vol 36 (4I) ◽  
pp. 321-331
Author(s):  
Sarfraz Khan Qureshi

It is an honour for me as President of the Pakistan Society of Development Economists to welcome you to the 13th Annual General Meeting and Conference of the Society. I consider it a great privilege to do so as this Meeting coincides with the Golden Jubilee celebrations of the state of Pakistan, a state which emerged on the map of the postwar world as a result of the Muslim freedom movement in the Indian Subcontinent. Fifty years to the date, we have been jubilant about it, and both as citizens of Pakistan and professionals in the social sciences we have also been thoughtful about it. We are trying to see what development has meant in Pakistan in the past half century. As there are so many dimensions that the subject has now come to have since its rather simplistic beginnings, we thought the Golden Jubilee of Pakistan to be an appropriate occasion for such stock-taking.


Author(s):  
Deepak Goyal

Abstract Next generation assembly/package development challenges are primarily increased interconnect complexity and density with ever shorter development time. The results of this trend present some distinct challenges for the analytical tools/techniques to support this technical roadmap. The key challenge in the analytical tools/techniques is the development of non-destructive imaging for improved time to information. This paper will present the key drivers for the non-destructive imaging, results of literature search and evaluation of key analytical techniques currently available. Based on these studies requirements of a 3D imaging capability will be discussed. Critical breakthroughs required for development of such a capability are also summarized.


Author(s):  
Daiva Milinkevičiūtė

The Age of Enlightenment is defined as the period when the universal ideas of progress, deism, humanism, naturalism and others were materialized and became a golden age for freemasons. It is wrong to assume that old and conservative Christian ideas were rejected. Conversely, freemasons put them into new general shapes and expressed them with the help of symbols in their daily routine. Symbols of freemasons had close ties with the past and gave them, on the one hand, a visible instrument, such as rituals and ideas to sense the transcendental, and on the other, intense gnostic aspirations. Freemasons put in a great amount of effort to improve themselves and to create their identity with the help of myths and symbols. It traces its origins to the biblical builders of King Solomon’s Temple, the posterity of the Templar Knights, and associations of the medieval craft guilds, which were also symbolical and became their link not only to each other but also to the secular world. In this work we analysed codified masonic symbols used in their rituals. The subject of our research is the universal Masonic idea and its aspects through the symbols in the daily life of the freemasons in Vilnius. Thanks to freemasons’ signets, we could find continuity, reception, and transformation of universal masonic ideas in the Lithuanian freemasonry and national characteristics of lodges. Taking everything into account, our article shows how the universal idea of freemasonry spread among Lithuanian freemasonry, and which forms and meanings it incorporated in its symbols. The objective of this research is to find a universal Masonic idea throughout their visual and oral symbols and see its impact on the daily life of the masons in Vilnius. Keywords: Freemasonry, Bible, lodge, symbols, rituals, freemasons’ signets.


2018 ◽  
Vol 18 (2) ◽  
pp. 156-165 ◽  
Author(s):  
Jiaqiang Wang ◽  
Chien-shan Cheng ◽  
Yan Lu ◽  
Xiaowei Ding ◽  
Minmin Zhu ◽  
...  

Background: Propofol, a widely used intravenous anesthetic agent, is traditionally applied for sedation and general anesthesia. Explanation: Recent attention has been drawn to explore the effect and mechanisms of propofol against cancer progression in vitro and in vivo. Specifically, the proliferation-inhibiting and apoptosis-inducing properties of propofol in cancer have been studied. However, the underlying mechanisms remain unclear. Conclusion: This review focused on the findings within the past ten years and aimed to provide a general overview of propofol's malignance-modulating properties and the potential molecular mechanisms.


No other talent process has been the subject of such great debate and emotion as performance management (PM). For decades, different strategies have been tried to improve PM processes, yielding an endless cycle of reform to capture the next “flavor-of-the-day” PM trend. The past 5 years, however, have brought novel thinking that is different from past trends. Companies are reducing their formal processes, driving performance-based cultures, and embedding effective PM behavior into daily work rather than relying on annual reviews to drive these. Through case studies provided from leading organizations, this book illustrates the range of PM processes that companies are using today. These show a shift away from adopting someone else’s best practice; instead, companies are designing bespoke PM processes that fit their specific strategy, climate, and needs. Leading PM thought leaders offer their views about the state of PM today, what we have learned and where we need to focus future efforts, including provocative new research that shows what matters most in driving high performance. This book is a call to action for talent management professionals to go beyond traditional best practice and provide thought leadership in designing PM processes and systems that will enhance both individual and organizational performance.


Urban Science ◽  
2020 ◽  
Vol 4 (4) ◽  
pp. 70
Author(s):  
Till Koglin ◽  
Lucas Glasare

This paper evaluates the history and cycling accessibility of Nova, a shopping centre established in Lund, Sweden, in 2002. The current situation was also analysed through observation and a literature review. Moreover, the study conducted a closer analysis of the history and role of the municipality based on further literature study and interviews with officials. The conclusion of the analysis indicates poor and unsafe bikeways caused by conflicts of interest between politicians, officials, landowners and the general public. It also depicts a situation in which the municipality’s master plan has been ignored, and, in contrast to the local goals, cycling accessibility at Nova has seen no significant improvement since the shopping centre was first established. The reasons for this, arguably, are a relatively low budget for bikeway improvements in the municipality, as well as a situation in which decision-makers have stopped approaching the subject, as a result of the long and often boisterous conflicts it has created in the past. Lastly, it must be noted that it is easy to regard the whole process of Nova, from its establishment to the current situation, as being symptomatic of the power structures between drivers and cyclists that still affect decision-makers at all levels.


Sign in / Sign up

Export Citation Format

Share Document