scholarly journals The 370 Da inhibitor of the sodium pump in the plasma of haemodialysis patients

2021 ◽  
Author(s):  
David Makanjuola ◽  
Gwyn A. Lord ◽  
Philip J. Hilton
Keyword(s):  
Renal Failure ◽  
High Performance ◽  
Sodium Pump ◽  
High Sensitivity ◽  
Structural Isomers ◽  
Blood Samples ◽  
Intermittent Haemodialysis ◽  
Limit Of Quantitation ◽  
Study Population ◽  
Sodium Pump Inhibition

Background: Previous studies have shown that a molecule of mass 370 Da that inhibits the sodium pump can be extracted from human placentas and from the concentrated plasma or ultrafiltrate of volume-expanded patients. Aim: To study the abundance of the 370 Da molecule and its changes across dialysis in a population of patients with renal failure treated by haemodialysis. Methods: 4 mL pre- and post-dialysis blood samples (2 mL plasma) were taken from patients receiving intermittent haemodialysis and analysed by high performance liquid chromatography (HPLC) coupled to high sensitivity mass spectrometry. Results: In over half the study population, the 370 Da molecule was present in an abundance that exceeded the limit of quantitation. Most patients experienced a marked fall in the abundance of the molecule over a haemodiafiltration (HDF) session, though exceptions were seen in two individuals both of whom showed clear evidence for the presence of two structural isomers of the 370 Da molecule. Conclusions: Advanced renal failure is frequently accompanied by an increased abundance of a 370 Da inhibitor of the sodium pump and that abundance is strongly impacted by haemodialysis. The technique described here could readily be applied to other clinical situations where sodium pump inhibition might be anticipated, such as hypertension, pregnancy and fetal medicine and thereby lead to a better understanding of the physiology and patho-physiology of these conditions.

Assessment of the Validity of the INR System for Patients with Liver Impairment

1994 ◽  
Vol 71 (06) ◽  
pp. 727-730 ◽  
Author(s):  
M J Kovacs ◽  
A Wong ◽  
K MacKinnon ◽  
K Weir ◽  
M Keeney ◽  
...  
Keyword(s):  
Oral Anticoagulants ◽  
Control Population ◽  
Blood Samples ◽  
Liver Impairment ◽  
Study Population ◽  
Level Of Significance

SummaryThe INR system was developed to standardize PT reporting in patients on oral anticoagulants. We prospectively collected blood samples from 29 patients with liver impairment (INR 1.5-3.5). Control patients were on warfarin (n = 31). PT’s were measured on an ACL-300 with three thromboplastin reagents. INR’s were calculated using instrument specific ISI’s. Other tests performed were FDP’s, fibrinogen, aPTT, factors II, V, VII and X. The INR’s for each patient in the study population using the three thromboplastin reagents were significantly different (p = 0.0001). Those for the control population were not (p = 0.0658). Fibrinogen, factors V, II and X were different at the 5% level of significance between the populations. FDP’s were detected in 17 study subjects. The INR system is not valid for comparison of patients with liver impairment because different reagents do not give the same INR for the same sample. It is, however, no less valid than the use of PT with different thromboplastin reagents. Further study is recommended.

Determination of Selected Phthalates in Some Commercial Cosmetic Products by HPLC-UV

2020 ◽  
Vol 23 (10) ◽  
pp. 1010-1022
Author(s):  
Emrah Dural
Keyword(s):  
High Performance ◽  
Phthalate Esters ◽  
High Sensitivity ◽  
Hplc Method ◽  
Cosmetic Products ◽  
Limit Of Quantification ◽  
Nail Polish ◽  
Accuracy And Precision ◽  
Butyl Phthalate

Aim and scope: Due to the serious toxicological risks and their widespread use, quantitative determination of phthalates in cosmetic products have importance for public health. The aim of this study was to develop a validated simple, rapid and reliable high-performance liquid chromatography (HPLC) method for the determination of phthalates which are; dimethyl phthalate (DMP), diethyl phthalate (DEP), benzyl butyl phthalate (BBP), di-n-butyl phthalate (DBP), di(2- ethylhexyl) phthalate (DEHP), in cosmetic products and to investigate these phthalate (PHT) levels in 48 cosmetic products marketing in Sivas, Turkey. Materials and Methods: Separation was achieved by a reverse-phase ACE-5 C18 column (4.6 x 250 mm, 5.0 μm). As the mobile phase, 5 mM KH2PO4 and acetonitrile were used gradiently at 1.5 ml min-1. All PHT esters were detected at 230 nm and the run time was taking 21 minutes. Results: This method showed the high sensitivity value the limit of quantification (LOQ) values for which are below 0.64 μg mL-1 of all phthalates. Method linearity was ≥0.999 (r2). Accuracy and precision values of all phthalates were calculated between (-6.5) and 6.6 (RE%) and ≤6.2 (RSD%), respectively. Average recovery was between 94.8% and 99.6%. Forty-eight samples used for both babies and adults were successfully analyzed by the developed method. Results have shown that, DMP (340.7 μg mL-1 ±323.7), DEP (1852.1 μg mL-1 ± 2192.0), and DBP (691.3 μg mL-1 ± 1378.5) were used highly in nail polish, fragrance and cream products, respectively. Conclusion: Phthalate esters, which are mostly detected in the content of fragrance, cream and nail polish products and our research in general, are DEP (1852.1 μg mL-1 ± 2192.0), DBP (691.3 μg mL-1 ± 1378.5) and DMP (340.7 μg mL-1 ±323.7), respectively. Phthalates were found in the content of all 48 cosmetic products examined, and the most detected phthalates in general average were DEP (581.7 μg mL-1 + 1405.2) with a rate of 79.2%. The unexpectedly high phthalate content in the examined cosmetic products revealed a great risk of these products on human health. The developed method is a simple, sensitive, reliable and economical alternative for the determination of phthalates in the content of cosmetic products, it can be used to identify phthalate esters in different products after some modifications.

Validated Stability Indicating HPTLC Method for the Estimation of Amoxapine in Different Stress Conditions

2019 ◽  
Vol 15 (3) ◽  
pp. 273-279
Author(s):  
Shweta G. Rangari ◽  
Nishikant A. Raut ◽  
Pradip W. Dhore
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Degradation Products ◽  
Analysis Data ◽  
Peak Height ◽  
Good Resolution ◽  
Stability Indicating ◽  
Limit Of Quantitation ◽  
Wide Range ◽  
Hptlc Method

Background:The unstable and/or toxic degradation products may form due to degradation of drug which results into loss of therapeutic activity and lead to life threatening condition. Hence, it is important to establish the stability characteristics of drug in various conditions such as in temperature, light, oxidising agent and susceptibility across a wide range of pH values.Introduction:The aim of the proposed study was to develop simple, sensitive and economic stability indicating high performance thin layer chromatography (HPTLC) method for the quantification of Amoxapine in the presence of degradation products.Methods:Amoxapine and its degraded products were separated on precoated silica gel 60F254 TLC plates by using mobile phase comprising of methanol: toluene: ammonium acetate (6:3:1, v/v/v). The densitometric evaluation was carried out at 320 nm in reflectance/absorbance mode. The degradation products obtained as per ICH guidelines under acidic, basic and oxidative conditions have different Rf values 0.12, 0.26 and 0.6 indicating good resolution from each other and pure drug with Rf: 0.47. Amoxapine was found to be stable under neutral, thermal and photo conditions.Results:The method was validated as per ICH Q2 (R1) guidelines in terms of accuracy, precision, ruggedness, robustness and linearity. A good linear relationship between concentration and response (peak area and peak height) over the range of 80 ng/spot to 720 ng/spot was observed from regression analysis data showing correlation coefficient 0.991 and 0.994 for area and height, respectively. The limit of detection (LOD) and limit of quantitation (LOQ) for area were found to be 1.176 ng/mL and 3.565 ng/mL, whereas for height, 50.063 ng/mL and 151.707 ng/mL respectively.Conclusion:The statistical analysis confirmed the accuracy, precision and selectivity of the proposed method which can be effectively used for the analysis of amoxapine in the presence of degradation products.

scholarly journals Determination of 19 Psychoactive Substances in Premortem and Postmortem Whole Blood Samples Using Ultra-High-Performance Liquid Chromatography–Tandem Mass Spectrometry

Separations ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 78
Author(s):  
Sevasti Karampela ◽  
Jessica Smith ◽  
Irene Panderi
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Formic Acid ◽  
Whole Blood ◽  
High Performance ◽  
Tandem Mass ◽  
Psychoactive Substances ◽  
Blood Samples ◽  
Whole Blood Samples

An ever-increasing need exists within the forensic laboratories to develop analytical processes for the qualitative and quantitative determination of a broad spectrum of new psychoactive substances. Phenylethylamine derivatives are among the major classes of psychoactive substances available on the global market and include both amphetamine analogues and synthetic cathinones. In this work, an ultra-high-performance liquid chromatography-positive ion electrospray ionization tandem mass spectrometric method (UHPLC-ESI-MS/MS) has been developed and fully validated for the determination of 19 psychoactive substances, including nine amphetamine-type stimulants and 10 synthetic cathinone derivatives, in premortem and postmortem whole blood. The assay was based on the use of 1 mL premortem or postmortem whole blood, following solid phase extraction prior to the analysis. The separation was achieved on a Poroshell 120 EC-C18 analytical column with a gradient mobile phase of 0.1% formic acid in acetonitrile and 0.1% formic acid in water in 9 min. The dynamic multiple reaction monitoring used in this work allowed for limit of detection (LOD) and lower limit of quantitation (LOQ) values of 0.5 and 2 ng mL−1, respectively, for all analytes both in premortem and postmortem whole blood samples. A quadratic calibration model was used for the 12 quantitative analytes over the concentration range of 20–2000 ng mL−1, and the method was shown to be precise and accurate both in premortem and postmortem whole blood. The method was applied to the analysis of real cases and proved to be a valuable tool in forensic and clinical toxicology.

scholarly journals Design of a Sensitive Balloon Sensor for Safe Human–Robot Interaction

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2163
Author(s):  
Dongjin Kim ◽  
Seungyong Han ◽  
Taewi Kim ◽  
Changhwan Kim ◽  
Doohoe Lee ◽  
...  
Keyword(s):  
High Performance ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Robot Interaction ◽  
Large Area ◽  
Tactile Sensors ◽  
Robot Interaction ◽  
Mechanical Crack ◽  
Flexible Strain Sensor ◽  
Contact Sensing

As the safety of a human body is the main priority while interacting with robots, the field of tactile sensors has expanded for acquiring tactile information and ensuring safe human–robot interaction (HRI). Existing lightweight and thin tactile sensors exhibit high performance in detecting their surroundings. However, unexpected collisions caused by malfunctions or sudden external collisions can still cause injuries to rigid robots with thin tactile sensors. In this study, we present a sensitive balloon sensor for contact sensing and alleviating physical collisions over a large area of rigid robots. The balloon sensor is a pressure sensor composed of an inflatable body of low-density polyethylene (LDPE), and a highly sensitive and flexible strain sensor laminated onto it. The mechanical crack-based strain sensor with high sensitivity enables the detection of extremely small changes in the strain of the balloon. Adjusting the geometric parameters of the balloon allows for a large and easily customizable sensing area. The weight of the balloon sensor was approximately 2 g. The sensor is employed with a servo motor and detects a finger or a sheet of rolled paper gently touching it, without being damaged.

scholarly journals Integrating high-performing electrochemical transducers in lateral flow assay

2021 ◽  
Author(s):  
Antonia Perju ◽  
Nongnoot Wongkaew
Keyword(s):  
High Performance ◽  
Point Of Care ◽  
Low Cost ◽  
High Sensitivity ◽  
Lateral Flow ◽  
Analytical Performance ◽  
Label Free ◽  
High Performing ◽  
Lateral Flow Assays ◽  
Electrochemical Transducers

AbstractLateral flow assays (LFAs) are the best-performing and best-known point-of-care tests worldwide. Over the last decade, they have experienced an increasing interest by researchers towards improving their analytical performance while maintaining their robust assay platform. Commercially, visual and optical detection strategies dominate, but it is especially the research on integrating electrochemical (EC) approaches that may have a chance to significantly improve an LFA’s performance that is needed in order to detect analytes reliably at lower concentrations than currently possible. In fact, EC-LFAs offer advantages in terms of quantitative determination, low-cost, high sensitivity, and even simple, label-free strategies. Here, the various configurations of EC-LFAs published are summarized and critically evaluated. In short, most of them rely on applying conventional transducers, e.g., screen-printed electrode, to ensure reliability of the assay, and additional advances are afforded by the beneficial features of nanomaterials. It is predicted that these will be further implemented in EC-LFAs as high-performance transducers. Considering the low cost of point-of-care devices, it becomes even more important to also identify strategies that efficiently integrate nanomaterials into EC-LFAs in a high-throughput manner while maintaining their favorable analytical performance.

scholarly journals Evaluation of four different HPLC devices for hemoglobinopathy screening

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Müjgan Ercan Karadağ ◽  
Emiş Deniz Akbulut ◽  
Esin Avcı ◽  
Esra Fırat Oğuz ◽  
Saadet Kader ◽  
...  
Keyword(s):  
Gold Standard ◽  
High Performance ◽  
Public Health Problem ◽  
Reference Value ◽  
Comparison Study ◽  
Gold Standard Method ◽  
Blood Samples ◽  
Systematic Biases ◽  
Hemoglobin Variants ◽  
Thalassemia Screening

AbstractObjectiveHemoglobinopathies are a common public health problem in Turkey. In the screening of these disorders in population, cation-exchange high performance liquid chromatography (HPLC) is accepted as the gold standard method. In this study, the aim was to assess four different HPLC devices used in hemoglobinopathy screening.Materials and methodsA total of 58 blood samples were analyzed with four different HPLC methods (Bio-Rad variant II, Agilent 1100, Tosoh G8 and Trinity Ultra2 trademarks).ResultsThe comparison study demonstrated a good correlation between the results of each HPLC analyzer and the reference value obtained by averaging all the HbA2 results belonging to the methods tested in the study [ (Tosoh G8 (r=0.988), Bio-Rad variant II (r=0.993), Agilent 1100 (r=0.98) and Trinity Ultra2 (r=0.992) ]. HbA2 determination in the presence of HbE was interfered in both Bio-Rad variant II and Tosoh G8.ConclusionThe analyzers were found to have compatible HbA2 results but with accompanying different degrees of proportional and systematic biases. HPLC analyzers may be affected by different hemoglobin variants at different HbA2 concentrations, which is an important point to take into consideration during the evaluation of HbA2 results in thalassemia screening.

scholarly journals Development of One-Step Non-Solvent Extraction and Sensitive UHPLC-MS/MS Method for Assessment of N-(n-Butyl) Thiophosphoric Triamide (NBPT) and N-(n-Butyl) Phosphoric Triamide (NBPTo) in Milk

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2890
Author(s):  
Chikere G. Nkwonta ◽  
Macdara O’Neill ◽  
Niharika Rahman ◽  
Mary Moloney ◽  
Patrick J. Forrestal ◽  
...  
Keyword(s):  
Field Study ◽  
High Performance ◽  
Storage Temperature ◽  
Nitrous Oxide Emissions ◽  
Milk Samples ◽  
C Storage ◽  
Fortified Milk ◽  
Limit Of Quantitation ◽  
Improved Stability ◽  
Sensitivity Specificity

N-(n-butyl) thiophosphoric triamide (NBPT) is a urease inhibitor utilised in urea-based fertilizers. In Ireland, fertilizer treated with NBPT is applied to pasture to mitigate both ammonia and nitrous oxide emissions, but concerns arise as to the potential for residues in milk products. A quick ultrafiltration extraction and ultra-high performance liquid chromatography coupled with mass spectrometry triple quadrupole (UHPLC-MS/MS) quantitation method was developed and validated in this study. The method was applied in the analysis of samples collected from a field study investigating potential transfer of NBPT residues into milk. NBPT and NBPTo residues, were extracted from fortified milk samples and analysed on a UHPLC-MS/MS with recoveries ranging from 74 to 114%. Validation of the UHPLC-MS/MS method at low (0.0020 mg kg−1) and high (0.0250 mg kg−1) concentration levels in line with SANTE/12682/2019 showed overall trueness in the range of 99 to 104% and precision between 1 and 10%, RSD for both compounds. The limit of quantitation (LOQ) was 0.0020 mg kg−1 and other tested parameters (linearity, sensitivity, specificity, matrix effect, robustness, etc.) satisfied acceptance criteria. Stability assessment using spiked samples revealed the compounds were stable in raw and pasteurised milk for 4 weeks at –80 °C storage temperature. Maintaining samples at pH 8.5–9.0 further improved stability. Analysis of 516 milk samples from the field study found that NBPT and NBPTo concentrations were below the LOQ of 0.0020 mg kg−1, thus suggesting very low risk of residues occurring in the milk. The method developed is quick, robust, and sensitive. The method is deemed fit-for-purpose for the simultaneous determination of NBPT and NBPTo in milk.

scholarly journals Ultra-High Performance Liquid Chromatography-High Resolution Mass Spectrometry and High-Sensitivity Gas Chromatography-Mass Spectrometry Screening of Classic Drugs and New Psychoactive Substances and Metabolites in Urine of Consumers

2021 ◽  
Vol 22 (8) ◽  
pp. 4000
Author(s):  
Emilia Marchei ◽  
Maria Alias Ferri ◽  
Marta Torrens ◽  
Magí Farré ◽  
Roberta Pacifici ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Gas Chromatography ◽  
Mobile Phase ◽  
High Performance ◽  
High Resolution Mass Spectrometry ◽  
High Sensitivity ◽  
Gas Chromatography Mass Spectrometry ◽  
New Psychoactive Substances ◽  
Psychoactive Substances ◽  
Resolution Mass

The use of the new psychoactive substances is continuously growing and the implementation of accurate and sensible analysis in biological matrices of users is relevant and fundamental for clinical and forensic purposes. Two different analytical technologies, high-sensitivity gas chromatography-mass spectrometry (GC-MS) and ultra-high-performance liquid chromatography-high-resolution mass spectrometry (UHPLC-HRMS) were used for a screening analysis of classic drugs and new psychoactive substances and their metabolites in urine of formed heroin addicts under methadone maintenance therapy. Sample preparation involved a liquid-liquid extraction. The UHPLC-HRMS method included Accucore™ phenyl Hexyl (100 × 2.1 mm, 2.6 μm, Thermo, USA) column with a gradient mobile phase consisting of mobile phase A (ammonium formate 2 mM in water, 0.1% formic acid) and mobile phase B (ammonium formate 2 mM in methanol/acetonitrile 50:50 (v/v), 0.1% formic acid) and a full-scan data-dependent MS2 (ddMS2) mode for substances identification (mass range 100–1000 m/z). The GC-MS method employed an ultra-Inert Intuvo GC column (HP-5MS UI, 30 m, 250 µm i.d, film thickness 0.25 µm; Agilent Technologies, Santa Clara, CA, USA) and electron-impact (EI) mass spectra were recorded in total ion monitoring mode (scan range 40–550 m/z). Urine samples from 296 patients with a history of opioid use disorder were examined. Around 80 different psychoactive substances and/or metabolites were identified, being methadone and metabolites the most prevalent ones. The possibility to screen for a huge number of psychotropic substances can be useful in suspected drug related fatalities or acute intoxication/exposure occurring in emergency departments and drug addiction services.

Sign in / Sign up

Export Citation Format

Share Document