scholarly journals Trends in polymeric electrospun fibers and their use as oral biomaterials

2018 ◽  
Vol 243 (8) ◽  
pp. 665-676 ◽  
Author(s):  
Agnes B Meireles ◽  
Daniella K Corrêa ◽  
João VW da Silveira ◽  
Ana LG Millás ◽  
Edison Bittencourt ◽  
...  
Keyword(s):  
Polymeric Materials ◽  
Electrospun Fibers ◽  
Natural Polymers ◽  
Electrospinning Technique ◽  
Suitable Alternative ◽  
Materials Behaviors ◽  
Interdisciplinary Field ◽  
Recent Developments ◽  
Important Field ◽  
Materials Used

Electrospinning is one of the techniques to produce structured polymeric fibers in the micro or nano scale and to generate novel materials for biomedical proposes. Electrospinning versatility provides fibers that could support different surgical and rehabilitation treatments. However, its diversity in equipment assembly, polymeric materials, and functional molecules to be incorporated in fibers result in profusion of recent biomaterials that are not fully explored, even though the recognized relevance of the technique. The present article describes the main electrospun polymeric materials used in oral applications, and the main aspects and parameters of the technique. Natural and synthetic polymers, blends, and composites were identified from the available literature and recent developments. Main applications of electrospun fibers were focused on drug delivery systems, tissue regeneration, and material reinforcement or modification, although studies require further investigation in order to enable direct use in human. Current and potential usages as biomaterials for oral applications must motivate the development in the use of electrospinning as an efficient method to produce highly innovative biomaterials, over the next few years. Impact statement Nanotechnology is a challenge for many researchers that look for obtaining different materials behaviors by modifying characteristics at a very low scale. Thus, the production of nanostructured materials represents a very important field in bioengineering, in which the electrospinning technique appears as a suitable alternative. This review discusses and provides further explanation on this versatile technique to produce novel polymeric biomaterials for oral applications. The use of electrospun fibers is incipient in oral areas, mainly because of the unfamiliarity with the technique. Provided disclosure, possibilities and state of the art are aimed at supporting interested researchers to better choose proper materials, understand, and design new experiments. This work seeks to encourage many other researchers–Dentists, Biologists, Engineers, Pharmacists–to develop innovative materials from different polymers. We highlight synthetic and natural polymers as trends in treatments to motivate an advance in the worldwide discussion and exploration of this interdisciplinary field.

Sustainable adhesives and adhesion processes for the footwear industry

2020 ◽  
pp. 095440622095770
Author(s):  
F Arán-Ais ◽  
C Ruzafa-Silvestre ◽  
MP Carbonell-Blasco ◽  
MA Pérez-Limiñana ◽  
E Orgilés-Calpena
Keyword(s):  
Polymeric Materials ◽  
Environmental Footprint ◽  
Hazardous Chemicals ◽  
Footwear Industry ◽  
Plasma Surface Treatment ◽  
Volatile Organic ◽  
Recent Developments ◽  
Materials Used ◽  
Melt Adhesives ◽  
Hot Melt

The key to sustainable development in the footwear industry through the principles of circular economy lies in taking care of the design, as well as the introduction of innovative and more resource efficient materials and processes to reduce or avoid the use of water, energy, hazardous chemicals and to minimise emissions and waste. In fact, the environmental footprint is already being considered as another requirement of the footwear through eco-design. In this sense, previous studies carried out by INESCOP regarding its environmental impact in terms of carbon footprint showed that 15% of it corresponds to the assembly processes, mainly by adhesive joints, due to their content on organic solvents, hazardous chemicals and polymers from fossil origin. Therefore, this paper focuses on recent developments carried out by INESCOP on more sustainable adhesives and adhesion processes for the upper-to-sole assembly in the footwear manufacturing process, through different approaches. Firstly, bio-based reactive polyurethane hot melt adhesives have been synthesised using polyols from different renewable sources. Secondly, the use of the low-pressure plasma surface treatment to improve the adhesion of polymeric materials used as soling materials was assessed in order to reduce volatile organic compounds emissions, as well as the use of hazardous chemicals for total automation of the bonding process.

scholarly journals Fabrication, Modification, and Characterization of Lignin-Based Electrospun Fibers Derived from Distinctive Biomass Sources

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2277
Author(s):  
Amina Abdel Meguid Attia ◽  
Khadiga Mohamed Abas ◽  
Ahmed Ali Ahmed Nada ◽  
Mona Abdel Hamid Shouman ◽  
Alena Opálková Šišková ◽  
...  
Keyword(s):  
Dye Removal ◽  
Hybrid Composites ◽  
Polymeric Materials ◽  
Point Of View ◽  
Electrospun Fibers ◽  
Electrospinning Technique ◽  
Fiber Modification ◽  
Ft Ir ◽  
Palm Fronds

From the environmental point of view, there is high demand for the preparation of polymeric materials for various applications from renewable and/or waste sources. New lignin-based spun fibers were produced, characterized, and probed for use in methylene blue (MB) dye removal in this study. The lignin was extracted from palm fronds (PF) and banana bunch (BB) feedstock using catalytic organosolv treatment. Different polymer concentrations of either a plasticized blend of renewable polymers such as polylactic acid/polyhydroxybutyrate blend (PLA-PHB-ATBC) or polyethylene terephthalate (PET) as a potential waste material were used as matrices to generate lignin-based fibers by the electrospinning technique. The samples with the best fiber morphologies were further modified after iodine handling to ameliorate and expedite the thermostabilization process. To investigate the adsorption of MB dye from aqueous solution, two approaches of fiber modification were utilized. First, electrospun fibers were carbonized at 500 °C with aim of generating lignin-based carbon fibers with a smooth appearance. The second method used an in situ oxidative chemical polymerization of m-toluidine monomer to modify electrospun fibers, which were then nominated by hybrid composites. SEM, TGA, FT-IR, BET, elemental analysis, and tensile measurements were employed to evaluate the composition, morphology, and characteristics of manufactured fibers. The hybrid composite formed from an OBBL/PET fiber mat has been shown to be a promising adsorbent material with a capacity of 9 mg/g for MB dye removal.

scholarly journals Polymeric Materials Used for Immobilisation of Bacteria for the Bioremediation of Contaminants in Water

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1073
Author(s):  
Dmitriy Berillo ◽  
Areej Al-Jwaid ◽  
Jonathan Caplin
Keyword(s):  
Agricultural Waste ◽  
Polymeric Materials ◽  
Polluted Soil ◽  
Natural Polymers ◽  
Planktonic Cells ◽  
Waste Products ◽  
Applied Microbiology ◽  
Immobilised Cells ◽  
Materials Used ◽  
Synthetic And Natural Polymers

Bioremediation is a key process for reclaiming polluted soil and water by the use of biological agents. A commonly used approach aims to neutralise or remove harmful pollutants from contaminated areas using live microorganisms. Generally, immobilised microorganisms rather than planktonic cells have been used in bioremediation methods. Activated carbon, inorganic minerals (clays, metal oxides, zeolites), and agricultural waste products are acceptable substrates for the immobilisation of bacteria, although there are limitations with biomass loading and the issue with leaching of bacteria during the process. Various synthetic and natural polymers with different functional groups have been used successfully for the efficient immobilisation of microorganisms and cells. Promise has been shown using macroporous materials including cryogels with entrapped bacteria or cells in applications for water treatment and biotechnology. A cryogel is a macroporous polymeric gel formed at sub-zero temperatures through a process known as cryogelation. Macroporous hydrogels have been used to make scaffolds or supports for immobilising bacterial, viral, and other cells. The production of composite materials with immobilised cells possessing suitable mechanical and chemical stability, porosity, elasticity, and biocompatibility suggests that these materials are potential candidates for a range of applications within applied microbiology, biotechnology, and research. This review evaluates applications of macroporous cryogels as tools for the bioremediation of contaminants in wastewater.

scholarly journals Antiviral Textiles: A Review on their types and Significance

2021 ◽  
Vol 7 (03) ◽  
pp. 1-8
Author(s):  
Varsha N, Malavika B and Vyshnavi V Rao
Keyword(s):  
Therapeutic Potential ◽  
Polymeric Materials ◽  
Natural Fibre ◽  
Natural Polymers ◽  
Functional Nanomaterials ◽  
Scientific Communities ◽  
Virus Contamination ◽  
The World ◽  
Health Products ◽  
Materials Used

The world is ever developing with new inventions and technology to cater the changing lifestyles of people. The COVID-19 pandemic has stressed an increased importance of health products. One such innovation is antiviral textile which are which are capable of preventing the microbes or viruses to contact the surface of textiles. Natural fibre textiles are the best medium for the growth of many microbes which leads to degradation and unpleasant odours. To prevent all these undesirable effects, textiles are impregnated with antiviral nanoparticles in the fibres or fabrics. The use of nanoparticles makes the textiles antimicrobial, anti odour, water and stain repellent. In the last few decades, natural polymers have gained much attention among scientific communities owing to their therapeutic potential. Antiviral textiles are classified into a few broad groups, such as polymeric materials, metal ions/metal oxides, and functional nanomaterials, based on the type of materials used at the virus contamination sites. This review is an overview of antiviral textiles and their types, properties, structure of polymers and nanoparticles involved and their significance.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Recent Developments in Lignin- and Tannin-Based Non-Isocyanate Polyurethane Resins for Wood Adhesives—A Review

2021 ◽  
Vol 11 (9) ◽  
pp. 4242
Author(s):  
Manggar Arum Aristri ◽  
Muhammad Adly Rahandi Lubis ◽  
Sumit Manohar Yadav ◽  
Petar Antov ◽  
Antonios N. Papadopoulos ◽  
...  
Keyword(s):  
Automotive Industry ◽  
Polymeric Materials ◽  
Review Article ◽  
Future Perspectives ◽  
Wood Adhesives ◽  
Adhesion Properties ◽  
Lighting Industry ◽  
Renewable Natural Resources ◽  
Recent Developments ◽  
Strong Adhesion

This review article aims to summarize the potential of using renewable natural resources, such as lignin and tannin, in the preparation of NIPUs for wood adhesives. Polyurethanes (PUs) are extremely versatile polymeric materials, which have been widely used in numerous applications, e.g., packaging, footwear, construction, the automotive industry, the lighting industry, insulation panels, bedding, furniture, metallurgy, sealants, coatings, foams, and wood adhesives. The isocyanate-based PUs exhibit strong adhesion properties, excellent flexibility, and durability, but they lack renewability. Therefore, this study focused on the development of non-isocyanate polyurethane lignin and tannin resins for wood adhesives. PUs are commercially synthesized using polyols and polyisocyanates. Isocyanates are toxic, costly, and not renewable; thus, a search of suitable alternatives in the synthesis of polyurethane resins is needed. The reaction with diamine compounds could result in NIPUs based on lignin and tannin. The research on bio-based components for PU synthesis confirmed that they have good characteristics as an alternative for the petroleum-based adhesives. The advantages of improved strength, low curing temperatures, shorter pressing times, and isocyanate-free properties were demonstrated by lignin- and tannin-based NIPUs. The elimination of isocyanate, associated with environmental and human health hazards, NIPU synthesis, and its properties and applications, including wood adhesives, are reported comprehensively in this paper. The future perspectives of NIPUs’ production and application were also outlined.

Evaluation of Abrasive Wear of Polymeric Materials Using Single-Pass Pendulum Scratching

2002 ◽  
Author(s):  
Marcelo Torres Piza Paes ◽  
Antonio Marcos Rego Motta ◽  
Lauro Lemos Lontra Filho ◽  
Juliano Ose´ias de Morais ◽  
Sine´sio Domingues Franco
Keyword(s):  
Deep Water ◽  
Wear Mechanisms ◽  
Degradation Mechanism ◽  
Single Point ◽  
Polymeric Materials ◽  
Scratch Resistance ◽  
Wear Behaviour ◽  
Sediment Layer ◽  
Materials Used ◽  
Energy Dissipated

Scratching abrasion due to rubbing against the sediment layer is an important degradation mechanism of flexible cable in deep water oil and natural gas exploitation. The present study was initiated to gain relevant data on the wear behaviour of some commercial materials used to externally protect these cables. So, Comparison tests were carried out using the single-point scratching technique, which consists of a sharp point mounted at the extremity of a pendulum. The energy dissipated during the scratching is used to evaluate the relative scratch resistance. The results showed, that the contact geometry strongly affects the specific scratching energy. Using SEM imaging, it was found, that these changes were related to the operating wear mechanisms. The observed wear mechanisms are also compared with those observed on some cables in deep water operations.

scholarly journals Topographical and Biomechanical Guidance of Electrospun Fibers for Biomedical Applications

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2896
Author(s):  
Sara Ferraris ◽  
Silvia Spriano ◽  
Alessandro Calogero Scalia ◽  
Andrea Cochis ◽  
Lia Rimondini ◽  
...  
Keyword(s):  
Surface Modification ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Electrospun Fibers ◽  
Natural Polymers ◽  
Polymeric Fibers ◽  
Biological Phenomena ◽  
Proper Design ◽  
Synthetic And Natural Polymers ◽  
Selection Of

Electrospinning is gaining increasing interest in the biomedical field as an eco-friendly and economic technique for production of random and oriented polymeric fibers. The aim of this review was to give an overview of electrospinning potentialities in the production of fibers for biomedical applications with a focus on the possibility to combine biomechanical and topographical stimuli. In fact, selection of the polymer and the eventual surface modification of the fibers allow selection of the proper chemical/biological signal to be administered to the cells. Moreover, a proper design of fiber orientation, dimension, and topography can give the opportunity to drive cell growth also from a spatial standpoint. At this purpose, the review contains a first introduction on potentialities of electrospinning for the obtainment of random and oriented fibers both with synthetic and natural polymers. The biological phenomena which can be guided and promoted by fibers composition and topography are in depth investigated and discussed in the second section of the paper. Finally, the recent strategies developed in the scientific community for the realization of electrospun fibers and for their surface modification for biomedical application are presented and discussed in the last section.

Molecular materials for micro-electronics

2000 ◽  
Vol 78 (3) ◽  
pp. 231-241 ◽  
Author(s):  
M D'Iorio
Keyword(s):  
High Performance ◽  
Organic Materials ◽  
Coming Of Age ◽  
Polymeric Materials ◽  
Organic Light Emitting Diodes ◽  
Light Emitting ◽  
Light Emitting Devices ◽  
Plastic Electronics ◽  
Organic Light ◽  
Recent Developments

Molecular organic materials have had an illustrious past but the ability to deposit these as homogeneous thin films has rejuvenated the field and led to organic light-emitting diodes (OLEDs) and the development of an increasing number of high-performance polymers for nonlinear and electronic applications. Whereas the use of organic materials in micro-electronics was restricted to photoresists for patterning purposes, polymeric materials are coming of age as metallic interconnects, flexible substrates, insulators, and semiconductors in all-plastic electronics. The focus of this topical review will be on organic light-emitting devices with a discussion of the most recent developments in electronic devices.PACS Nos.: 85.60Jb, 78.60Fi, 78.55Kz, 78.66Qn, 73.61Ph, 72.80Le

Sign in / Sign up

Export Citation Format

Share Document