scholarly journals Effect of Chlorine-Containing VOCs on Silver Migration and Sintering in ZSM-5 Used in a TSA Process

Catalysts ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 686 ◽  
Author(s):  
Arnaud Monpezat ◽  
Gabriel Couchaux ◽  
Vincent Thomas ◽  
Antoine Artheix ◽  
Ludovic Deliere ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Silver Chloride ◽  
Chemical Properties ◽  
Pilot Scale ◽  
Regular System ◽  
Particle Migration ◽  
Synthesis Methods ◽  
Careful Study ◽  
Xenon Adsorption ◽  
Temperature Swing Adsorption

Silver nanoparticles are currently one of the most studied nanostructured nanomaterials. Because nanoparticle size and dispersion act together in determining a material’s physical and chemical properties, there is a continuous quest to develop size-controlled synthesis methods. Nonetheless, the instability of the nanometer-sized particles, which is caused by their tendency to aggregate irreversibly into larger particles, remains a recurrent problem. The use of confining scaffolds, such as the regular system of cages in a crystalline zeolite-type material, is often reported in the literature as an efficient solution to overcome particle migration at the surface. Silver nanoparticles encapsulated in ZSM-5 (Ag@ZSM-5) represent a new generation of adsorbent for Xe enrichment from the atmosphere that is currently being developed at the pilot scale in a Temperature Swing Adsorption (TSA) process. In this study, we have found that the presence of Cl-containing compounds in the air (VOCs) leads to a poisoning of the active silver phase by the formation of silver chloride. By a careful study of process parameters, we have found that most of the chlorine can be removed by heat treatment above 573 K so that the adsorption properties of silver are regenerated. That said, when applying 573 K temperature regeneration at the pilot scale, we observe a very minor but observable decay of xenon adsorption capacity that continues cycle after cycle. The mechanism of capacity decay is discussed in terms of (i) the residual presence of Cl at the surface of silver nanoparticles, (ii) the aggregation of silver nanoparticles into larger particles (sintering mechanism), and (iii) the acceleration of silver particle migration to the surface and sintering.

scholarly journals Silver Nanoparticles Stabilized with Phosphorus-Containing Heterocyclic Surfactants: Synthesis, Physico-Chemical Properties, and Biological Activity Determination

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1883
Author(s):  
Martin Pisárčik ◽  
Miloš Lukáč ◽  
Josef Jampílek ◽  
František Bilka ◽  
Andrea Bilková ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Biological Activity ◽  
Zeta Potential ◽  
Chain Length ◽  
Alkyl Chain ◽  
Chemical Properties ◽  
Alkyl Chain Length ◽  
Microbial Pathogens ◽  
Physico Chemical ◽  
Phosphorus Containing

Phosphorus-containing heterocyclic cationic surfactants alkyldimethylphenylphospholium bromides with the alkyl chain length 14 to 18 carbon atoms were used for the stabilization of silver nanodispersions. Zeta potential of silver nanodispersions ranges from +35 to +70 mV, which indicates the formation of stable silver nanoparticles (AgNPs). Long-chain heptadecyl and octadecyl homologs of the surfactants series provided the most intensive stabilizing effect to AgNPs, resulting in high positive zeta potential values and smaller diameter of AgNPs in the range 50–60 nm. A comparison with non-heterocyclic alkyltrimethylphosphonium surfactants of the same alkyl chain length showed better stability and more positive zeta potential values for silver nanodispersions stabilized with heterocyclic phospholium surfactants. Investigations of biological activity of phospholium-capped AgNPs are represented by the studies of antimicrobial activity and cytotoxicity. While cytotoxicity results revealed an increased level of HepG2 cell growth inhibition as compared with the cytotoxicity level of silver-free surfactant solutions, no enhanced antimicrobial action of phospholium-capped AgNPs against microbial pathogens was observed. The comparison of cytotoxicity of AgNPs stabilized with various non-heterocyclic ammonium and phosphonium surfactants shows that AgNPs capped with heterocyclic alkyldimethylphenylphospholium and non-heterocyclic triphenyl-substituted phosphonium surfactants have the highest cytotoxicity among silver nanodispersions stabilized by the series of ammonium and phosphonium surfactants.

scholarly journals Interrelations of Synthesis Method, Polyethylene Glycol Coating, Physico-Chemical Characteristics, and Antimicrobial Activity of Silver Nanoparticles

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2475
Author(s):  
Amirah Shafilla Mohamad Kasim ◽  
Arbakariya Bin Ariff ◽  
Rosfarizan Mohamad ◽  
Fadzlie Wong Faizal Wong
Keyword(s):  
Antimicrobial Activity ◽  
Silver Nanoparticles ◽  
Polyethylene Glycol ◽  
Pathogenic Bacteria ◽  
Synthesis Method ◽  
Chemical Characteristics ◽  
Synthesis Methods ◽  
Uniform Size ◽  
Transmission Electron Microscopy Analysis ◽  
Physico Chemical

Silver nanoparticles (AgNPs) have been found to have extensive biomedical and biological applications. They can be synthesised using chemical and biological methods, and coated by polymer to enhance their stability. Hence, the changes in the physico-chemical characteristics of AgNPs must be scrutinised due to their importance for biological activity. The UV-Visible absorption spectra of polyethylene glycol (PEG) -coated AgNPs displayed a distinctive narrow peak compared to uncoated AgNPs. In addition, High-Resolution Transmission Electron Microscopy analysis revealed that the shapes of all AgNPs, were predominantly spherical, triangular, and rod-shaped. Fourier-Transform Infrared Spectroscopy analysis further confirmed the role of PEG molecules in the reduction and stabilisation of the AgNPs. Moreover, dynamic light scattering analysis also revealed that the polydispersity index values of PEG-coated AgNPs were lower than the uncoated AgNPs, implying a more uniform size distribution. Furthermore, the uncoated and PEG-coated biologically synthesised AgNPs demonstrated antagonisms activities towards tested pathogenic bacteria, whereas no antagonism activity was detected for the chemically synthesised AgNPs. Overall, generalisation on the interrelations of synthesis methods, PEG coating, characteristics, and antimicrobial activity of AgNPs were established in this study.

scholarly journals Bimetallic Nanocrystals: Structure, Controllable Synthesis and Applications in Catalysis, Energy and Sensing

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1926
Author(s):  
Gaojie Li ◽  
Wenshuang Zhang ◽  
Na Luo ◽  
Zhenggang Xue ◽  
Qingmin Hu ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Chemical Properties ◽  
Research Progress ◽  
Synthesis Methods ◽  
Controlled Synthesis ◽  
Controllable Synthesis ◽  
Composition And Structure ◽  
Bimetallic Nanocrystals ◽  
Physical And Chemical ◽  
And Chemical Properties

In recent years, bimetallic nanocrystals have attracted great interest from many researchers. Bimetallic nanocrystals are expected to exhibit improved physical and chemical properties due to the synergistic effect between the two metals, not just a combination of two monometallic properties. More importantly, the properties of bimetallic nanocrystals are significantly affected by their morphology, structure, and atomic arrangement. Reasonable regulation of these parameters of nanocrystals can effectively control their properties and enhance their practicality in a given application. This review summarizes some recent research progress in the controlled synthesis of shape, composition and structure, as well as some important applications of bimetallic nanocrystals. We first give a brief introduction to the development of bimetals, followed by the architectural diversity of bimetallic nanocrystals. The most commonly used and typical synthesis methods are also summarized, and the possible morphologies under different conditions are also discussed. Finally, we discuss the composition-dependent and shape-dependent properties of bimetals in terms of highlighting applications such as catalysis, energy conversion, gas sensing and bio-detection applications.

Silver nanoparticles induce cytotoxicity, but not cell transformation or genotoxicity on Balb3T3 mouse fibroblasts

2013 ◽  
Vol 14 (1-2) ◽  
pp. 49-60 ◽  
Author(s):  
Francesca Broggi ◽  
Jessica Ponti ◽  
Guido Giudetti ◽  
Fabio Franchini ◽  
Vicki Stone ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Cell Transformation ◽  
Micronucleus Test ◽  
Chemical Properties ◽  
Neoplastic Transformation ◽  
Research Centre ◽  
Ag Nps ◽  
Joint Research ◽  
Ic50 Values ◽  
Average Size

AbstractSilver nanoparticles (Ag NPs) are one of the most common nanomaterials present in nanotechnology-based products. Here, the physical chemical properties of Ag NPs suspensions of 44 nm, 84 nm and 100 nm sizes synthesized in our laboratory were characterized. The NM-300 material (average size of 17 nm), supplied by the Joint Research Centre Nanomaterials Repository was also included in the present study. The Ag NPs potential cytotoxicity was tested on the Balb3T3 cell line by the Colony Forming Efficiency assay, while their potential morphological neoplastic transformation and genotoxicity were tested by the Cell Transformation Assay and the micronucleus test, respectively. After 24 h of exposure, NM-300 showed cytotoxicity with an IC50 of 8 µM (corresponding to 0.88 µg/mL) while for the other nanomaterials tested, values of IC50 were higher than 10 µM (1.10 µg/mL). After 72 h of exposure, Ag NPs showed size-dependent cytotoxic effect with IC50 values of 1.5 µM (1.16 µg/mL) for NM-300, 1.7 µM (1.19 µg/mL) for Ag 44 nm, 1.9 µM (0.21 µg/mL) for Ag 84 nm and 3.2 µM (0.35 µg/mL) for Ag 100 nm. None of the Ag NPs tested was able to induce either morphological neoplastic transformation or micronuclei formation.

Sēra dioksīda fizikāli ķīmisko īpašību pielietojums jaunu organiskās sintēzes metožu izstrādē / Development of New Organic Synthesis Methods Based on Physico-Chemical Properties of Sulfur Dioxide

2021 ◽  
Author(s):  
◽  
Krista Gulbe
Keyword(s):  
Organic Synthesis ◽  
Chemical Properties ◽  
Coupling Reaction ◽  
Synthetic Methods ◽  
Synthesis Methods ◽  
Chemical Transformations ◽  
Scientific Publications ◽  
Cross Coupling Reaction ◽  
Aryl Acetylenes ◽  
The Republic

The Doctoral Thesis has been prepared as a collection of thematically related scientific publications comprising five publications in the SCI journals, one patent of the Republic of Latvia, and one application for patent of the Republic of Latvia. We have carried out fundamental research on the applications of SO2 as a solvent and reagent in organic synthesis. We have developed several novel synthetic methods that represent the use of liquid SO2 as a solvent for chemical transformations that proceed via carbenium ion intermediates: a) hydration of aryl acetylenes; b) hydrohalogenation of aryl acetylenes; c) ring opening of methylenecyclopropanes with halides; d) glycosylation with glycosyl fluorides. By employing DABSO as an SO2 surrogate, we have also discovered the catalytic activity of Ru(II) complexes towards sulfonylative cross coupling reaction. This finding has been applied for the synthesis of sulfonyl derived compounds.

Synthesis, Characterization, Applications, and Toxicity of Green Synthesized Nanoparticles

2021 ◽  
Vol 22 ◽  
Author(s):  
João Marcos Pereira Galúcio ◽  
Sorrel Godinho Barbosa de Souza ◽  
Arthur Abinader Vasconcelos ◽  
Alan Kelbis Oliveira Lima ◽  
Kauê Santana da Costa ◽  
...  
Keyword(s):  
Green Synthesis ◽  
Low Cost ◽  
Chemical Properties ◽  
Analytical Techniques ◽  
Industrial Applications ◽  
Synthesis Methods ◽  
Methods Of Synthesis ◽  
Food Applications ◽  
Living Organisms ◽  
Harmful Effects

: Nanotechnology is a cutting-edge area with numerous industrial applications. Nanoparticles are structures that have dimensions ranging from 1–100 nm which exhibit significantly different mechanical, optical, electrical, and chemical properties when compared with their larger counterparts. Synthetic routes that use natural sources, such as plant extracts, honey, and microorganisms are environmentally friendly and low-cost methods that can be used to obtain nanoparticles. These methods of synthesis generate products that are more stable and less toxic than those obtained using conventional methods. Nanoparticles formed by titanium dioxide, zinc oxide, silver, gold, and copper, as well as cellulose nanocrystals are among the nanostructures obtained by green synthesis that have shown interesting applications in several technological industries. Several analytical techniques have also been used to analyze the size, morphology, hydrodynamics, diameter, and chemical functional groups involved in the stabilization of the nanoparticles as well as to quantify and evaluate their formation. Despite their pharmaceutical, biotechnological, cosmetic, and food applications, studies have detected their harmful effects on human health and the environment; and thus, caution must be taken in uses involving living organisms. The present review aims to present an overview of the applications, the structural properties, and the green synthesis methods that are used to obtain nanoparticles, and special attention is given to those obtained from metal ions. The review also presents the analytical methods used to analyze, quantify, and characterize these nanostructures.

scholarly journals Synthesis of L-DOPA Based Melanins with Reproducible Physic-Chemical Properties

2018 ◽  
Author(s):  
Koen Vercruysse ◽  
Jayla Moore
Keyword(s):  
Ir Spectroscopy ◽  
Enzymatic Synthesis ◽  
Chemical Properties ◽  
Size Exclusion ◽  
Synthesis Methods ◽  
Ongoing Research ◽  
Vis Spectroscopy ◽  
Exclusion Chromatography ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

This report expands our ongoing research efforts into the non-enzymatic synthesis of melanins. We have explored four different methods for the synthesis of L-DOPA based melanins and evaluated the reproducibility of some of their physic-chemical properties. The melanins were synthesized through the addition of NaOH, tyrosinate or Fe<sup>2+</sup>/H<sub>2</sub>O<sub>2</sub>. Two different approaches for the reactions involving Fe<sup>2+</sup> and H<sub>2</sub>O<sub>2</sub> were tested: a) addition of H<sub>2</sub>O<sub>2</sub> spread out over multiple days or b) addition of H<sub>2</sub>O<sub>2</sub> in one fraction at the start of the reaction. The physic-chemical properties of the melanins explored involved: 1) retention on size exclusion chromatography column, 2) FT-IR spectroscopy, 3) UV-Vis spectroscopy and 4) the capacity to reduce a redox dye, dichlorophenolindophenol. Overall the results obtained indicated that 1) the various synthesis methods lead to melanins with reproducible physic-chemical properties, 2) that the melanins synthesized in the presence of Fe<sup>2+</sup>/H<sub>2</sub>O<sub>2</sub> are distinctly different from the melanins synthesized in the presence of NaOH or tyrosinate and 3) that no distinctly different melanins were generated when comparing the two different synthesis approaches involving Fe<sup>2+</sup>/H<sub>2</sub>O<sub>2</sub>. Only the melanins synthesized in the presence of Fe<sup>2+</sup>/H<sub>2</sub>O<sub>2</sub> appeared to possess the capacity to reduce dichlorophenolindophenol.

scholarly journals Preparation and Photocatalytic Performance of ZnO/Sepiolite Composite Materials

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Chao Li ◽  
Huijuan Li ◽  
Guicheng He ◽  
Zhiwu Lei ◽  
Wenyuan Wu
Keyword(s):  
Composite Materials ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
Environmental Pollutants ◽  
Chemical Properties ◽  
Treatment Method ◽  
Blue Dye ◽  
Synthesis Methods ◽  
Gel Method ◽  
Sol Gel Method

Photocatalytic technology is a widely used water treatment method, whose efficiency can be increased by developing a suitable photocatalyst fabrication procedure. In this study, five different synthesis methods were utilised for the preparation of novel ZnO/sepiolite photolytic composites, namely, sol-gel method, hydrothermal reduction, hydrolytic precipitation, powder sintering, and impregnation-reduction. The obtained photocatalysts were characterised by scanning electron microscopy, infrared spectroscopy, and X-ray diffraction. The differences between the applied photocatalyst preparation methods and the reasons for these differences were discussed, and the photocatalytic activities of the prepared composite materials were compared. The obtained results revealed that the physical structure, chemical properties, and photocatalytic performance of the composite produced by the sol-gel method were superior to those of the materials fabricated by the other four methods. Moreover, this material also exhibited high photocatalytic stability, while its photocatalytic degradation of methylene blue dye proceeded via a quasi-first-order reaction. The prepared composites have broad application prospects in photocatalysis and can be potentially used for treating environmental pollutants.

scholarly journals Atomically Dispersed M-N-C Catalysts in Proton Exchange Membrane Fuel Cells: Recent Progress and Perspectives

2021 ◽  
Vol 308 ◽  
pp. 01019
Author(s):  
Haoran Kong ◽  
Jiarong Liu ◽  
Yu Yue
Keyword(s):  
Fuel Cells ◽  
Cost Effectiveness ◽  
Proton Exchange Membrane ◽  
High Surface ◽  
High Surface Area ◽  
Chemical Properties ◽  
Proton Exchange ◽  
Synthesis Methods ◽  
Zeolitic Imidazolate Framework ◽  
Exchange Membrane

The selection of oxygen reduction reaction (ORR) catalysts plays a key role in enhancing the performance of proton exchange membrane fuel cells (PEMFCs). To optimize the energy conversion technology in PEMFCs and improve the cost-effectiveness of ORR catalysts, atomically dispersed metal-nitrogen-carbon (M-N-C) catalyst is regarded as one of the most promising materials to replace Pt-based catalysts. In this review, we summarize the advantages of atomically dispersed M-N-C catalysts in both physical and chemical properties, including controllable dimensions, ease of accessibility, high surface area and excellent conductivity. Additionally, the unique merits of their cost-effectiveness are also described by a concise comparison with other ORR catalysts. Subsequently, some of its main synthesis methods are based on the most commonly used zeolitic imidazolate framework (ZIF) precursor. Several other precursors involve carbon, nitrogen, and one or more active transition metals (mainly iron or cobalt) are introduced briefly. Although there are a variety of synthesis methods, all these methods are in line with pyrolysis technology. Then, the recent advancements of atomically dispersed M-N-C catalysts related to their development and application of Fe-N-C, Mn-N-C, and Co-N-C catalysts are comprehensively described. Finally, based on some common M-N-C catalysts, many improvement ideas are also proposed. The focus is on how to control the negative reaction in Fe-N-C catalysts, improve the activity of Co-N-C catalysts and Mn-N-C catalysts, and find more suitable transition metal materials to prepare M-N-C catalysts.

Sign in / Sign up

Export Citation Format

Share Document