scholarly journals Fabrication of Novel Chitosan–Hydroxyapatite Nanostructured Thin Films for Biomedical Applications

Coatings ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1561
Author(s):  
Carmen Steluta Ciobanu ◽  
Simona Liliana Iconaru ◽  
Daniela Predoi ◽  
Roxana-Doina Trușcă ◽  
Alina Mihaela Prodan ◽  
...  
Keyword(s):  
Antimicrobial Properties ◽  
Analytical Techniques ◽  
Rf Magnetron Sputtering ◽  
Working Pressure ◽  
Force Microscopy ◽  
Si Substrates ◽  
Composite Layers ◽  
Composition And Structure ◽  
Ft Ir ◽  
Ar Gas

In this study, we develop chitosan–hydroxyapatite (CS–HAp) composite layers that were deposited on Si substrates in radio frequency (RF) magnetron sputtering discharge in argon gas. The composition and structure of CS–HAp composite layers were investigated by analytical techniques, such as Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), metallographic microscopy (MM), and atomic force microscopy (AFM). On the other hand, in the present study the second order derivative of FT-IR–ATR spectra, for compositional analyses of CS–HAp, were used. The SEM, MM, and AFM data have shown the formation of CS–HAp composite layers. The surface of CS–HAp composite layers showed uniform growth (at an Ar gas working pressure of p = 2 × 10−3 mbar). The surface of the CS–HAp composites coatings became more nanostructured, becoming granular as the gas pressure increased from 5 × 10−3 to 1.2 × 10−2 mbar. However, our studies revealed that the surface morphology of the CS–HAp composite layers varies with the Ar gas working pressure. At the same time, optical properties are slightly influenced by Ar pressure. Their unique physicochemical properties make them suitable for various applications in the biomedical field, if we consider the already proven antimicrobial properties of chitosan. The antifungal properties and the capacity of the CS–HAp composite layers to inhibit the development of fungal biofilms were also demonstrated using the Candida albicans ATCC 10231 (C. albicans) fungal strain.

scholarly journals Antimicrobial Properties of Samarium Doped Hydroxyapatite Suspensions and Coatings

Coatings ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1124
Author(s):  
Simona Liliana Iconaru ◽  
Andreea Groza ◽  
Sofia Gaiaschi ◽  
Krzysztof Rokosz ◽  
Steinar Raaen ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Antimicrobial Agents ◽  
Antimicrobial Properties ◽  
Optical Emission ◽  
Rf Magnetron Sputtering ◽  
Major Health Problem ◽  
Force Microscopy ◽  
Si Substrates ◽  
Major Interest ◽  
Microbial Strains

Post-implant infections are a major health problem, and it is well-known that treating them with conventional drugs is accompanied by many disadvantages. The development of new biomaterials with enhanced antimicrobial properties are of major interest for the scientific world. The aim of this study was to synthesize and characterize hydroxyapatite doped with Samarium (Ca10−xSmx(PO4)6(OH)2, xSm = 0.05, 5Sm-HAp) suspensions, pellets and coatings. The 5Sm-HAp coatings on Si substrates were obtained by rf magnetron sputtering technique. The different techniques such as ultrasound measurements, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Glow Discharge Optical Emission Spectroscopy (GDOES), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) were used to examine the obtained coatings. The results showed that the doped Sm ions entered the structure of hydroxyapatite successfully and Sm ions was uniformly doped onto the surface of the support. The depth profile curves of Ca, P, O, H, Ce and Si elements exhibit their presence from a surface to substrate interface as function of sputtering time. XPS analysis indicated as calcium-phosphate structures enriched in Sm3+ ions. Furthermore, the antimicrobial properties of the 5Sm-HAp suspensions, targets and coatings were assessed against Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923 and Candida albicans ATCC 10231. The results of the antimicrobial assays highlighted that that the samples presented a strong antimicrobial activity against the tested microbial strains. The results showed that the coatings after 48 h of incubation inhibited the growth of all tested microbial strains under the value of 0.6 Log CFU/mL. This study shows that the 5Sm-HAp samples are good candidates for the development of new antimicrobial agents.

Reactive Sputtering Growth and Characterizations of InN Thin Films on Si Substrates

2012 ◽  
Vol 545 ◽  
pp. 290-293
Author(s):  
Maryam Amirhoseiny ◽  
Hassan Zainuriah ◽  
Ng Shashiong ◽  
Mohd Anas Ahmad
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Rf Magnetron Sputtering ◽  
Rf Power ◽  
X Ray Diffraction ◽  
Nitrogen Gas ◽  
X Ray ◽  
Force Microscopy ◽  
Si Substrates ◽  
Atomic Force

We have studied the effects of deposition conditions on the crystal structure of InN films deposited on Si substrate. InN thin films have been deposited on Si(100) substrates by reactive radio frequency (RF) magnetron sputtering method with pure In target at room temperature. The nitrogen gas pressure, applied RF power and the distance between target and substrate were 2×10-2 Torr, 60 W and 8 cm, respectively. The effects of the Ar–N2 sputtering gas mixture on the structural properties of the films were investigated by using scanning electron microscope, energy-dispersive X-ray spectroscopy, atomic force microscopy and X-ray diffraction techniques.

Electrical and Mechanical Properties of Post-Annealed SiCxNy Films

2009 ◽  
Vol 615-617 ◽  
pp. 327-330 ◽  
Author(s):  
Mariana A. Fraga ◽  
M. Massi ◽  
I.C. Oliveira ◽  
N.C. Cruz ◽  
S.G. Dos Santos Filho
Keyword(s):  
Mechanical Properties ◽  
Rf Magnetron Sputtering ◽  
Argon Atmosphere ◽  
Electrical Characteristics ◽  
Metal Insulator ◽  
Si Substrates ◽  
Composition And Structure ◽  
Mechanical And Structural Properties ◽  
Deposited Films ◽  
Mis Structures

Amorphous SiCxNy films have been deposited on (100) Si substrates by RF magnetron sputtering of a SiC target in a variable nitrogen-argon atmosphere. The as-deposited films were submitted to thermal anneling in a furnace under argon atmosphere at 1000 °C for 1 hour. Composition and structure of unannealed and annealed samples were investigated by RBS and FTIR. To study the electrical characteristics of SiCxNy films, Metal-insulator-semiconductor (MIS) structures were fabricated. Elastic modulus and hardness of the films were determined by nanoindentation. The results of these studies showed that nitrogen content and thermal annealing affect the electrical, mechanical and structural properties of SiCxNy films.

Deposition of Titanium Nitride Thin Films onto Silicon by RF Reactive Magnetron Sputtering

2009 ◽  
Vol 609 ◽  
pp. 117-121 ◽  
Author(s):  
Nadia Saoula ◽  
K. Henda ◽  
R. Kesri
Keyword(s):  
Magnetron Sputtering ◽  
Film Growth ◽  
Rf Magnetron Sputtering ◽  
Gas Mixture ◽  
Substrate Bias Voltage ◽  
Tin Films ◽  
Force Microscopy ◽  
Atomic Force ◽  
Ar Gas ◽  
Deposited Films

The properties of TiN films deposited by magnetron sputtering are related to their deposition conditions. The elaboration of our films has been carried out by RF-Magnetron Sputtering (13.56 MHz) from a titanium metallic target in reactive N2/Ar gas mixture. The main variables investigated are the composition of the Ar/N2 gas mixture, the total pressure, the deposition time, the discharge power but in this work the attention is given to the effect of the substrate bias voltage. A study is carried out the effects of these variations on the film growth rates, the film thickness and the properties of TiN films. The deposited films were characterized by energy dispersive spectroscopy (EDS), and observed by means of atomic force microscopy (AFM).

Investigation of the Effect of Uv-Assisted Oxidation and Nitridation of Hafnium Metal Films

2003 ◽  
Vol 780 ◽  
Author(s):  
C. Essary ◽  
V. Craciun ◽  
J. M. Howard ◽  
R. K. Singh
Keyword(s):  
Uv Radiation ◽  
Photoelectron Spectroscopy ◽  
Grazing Angle ◽  
X Ray Diffraction ◽  
Metal Thin Films ◽  
X Ray ◽  
Force Microscopy ◽  
Si Substrates ◽  
Atomic Force ◽  
Silicon Interface

AbstractHf metal thin films were deposited on Si substrates using a pulsed laser deposition technique in vacuum and in ammonia ambients. The films were then oxidized at 400 °C in 300 Torr of O2. Half the samples were oxidized in the presence of ultraviolet (UV) radiation from a Hg lamp array. X-ray photoelectron spectroscopy, atomic force microscopy, and grazing angle X-ray diffraction were used to compare the crystallinity, roughness, and composition of the films. It has been found that UV radiation causes roughening of the films and also promotes crystallization at lower temperatures.Furthermore, increased silicon oxidation at the interface was noted with the UVirradiated samples and was shown to be in the form of a mixed layer using angle-resolved X-ray photoelectron spectroscopy. Incorporation of nitrogen into the film reduces the oxidation of the silicon interface.

scholarly journals Chitosan hydrogel/silk fibroin/Mg(OH)2 nanobiocomposite as a novel scaffold with antimicrobial activity and improved mechanical properties

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Reza Eivazzadeh-Keihan ◽  
Fateme Radinekiyan ◽  
Hooman Aghamirza Moghim Aliabadi ◽  
Sima Sukhtezari ◽  
Behnam Tahmasebi ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Cell Viability ◽  
Silk Fibroin ◽  
Analytical Techniques ◽  
Structural Features ◽  
Mechanical Tests ◽  
Chitosan Hydrogel ◽  
Biological Capacity ◽  
Ft Ir ◽  
Novel Scaffold

AbstractHerein, a novel nanobiocomposite scaffold based on modifying synthesized cross-linked terephthaloyl thiourea-chitosan hydrogel (CTT-CS hydrogel) substrate using the extracted silk fibroin (SF) biopolymer and prepared Mg(OH)2 nanoparticles was designed and synthesized. The biological capacity of this nanobiocomposite scaffold was evaluated by cell viability method, red blood cells hemolytic and anti-biofilm assays. According to the obtained results from 3 and 7 days, the cell viability of CTT-CS/SF/Mg(OH)2 nanobiocomposite scaffold was accompanied by a considerable increment from 62.5 to 89.6% respectively. Furthermore, its low hemolytic effect (4.5%), and as well, the high anti-biofilm activity and prevention of the P. aeruginosa biofilm formation confirmed its promising hemocompatibility and antibacterial activity. Apart from the cell viability, blood biocompatibility, and antibacterial activity of CTT-CS/SF/Mg(OH)2 nanobiocomposite scaffold, its structural features were characterized using spectral and analytical techniques (FT-IR, EDX, FE-SEM and TG). As well as, given the mechanical tests, it was indicated that the addition of SF and Mg(OH)2 nanoparticles to the CTT-CS hydrogel could improve its compressive strength from 65.42 to 649.56 kPa.

scholarly journals Extracellular Vesicles Analysis in the COVID-19 Era: Insights on Serum Inactivation Protocols towards Downstream Isolation and Analysis

Cells ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 544
Author(s):  
Roberto Frigerio ◽  
Angelo Musicò ◽  
Marco Brucale ◽  
Andrea Ridolfi ◽  
Silvia Galbiati ◽  
...  
Keyword(s):  
Extracellular Vesicles ◽  
Analytical Techniques ◽  
Heat Inactivation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Droplet Pcr ◽  
Detergent Treatment ◽  
Routine Procedures ◽  
The Impact ◽  
Mirna Content

Since the outbreak of the COVID-19 crisis, the handling of biological samples from confirmed or suspected SARS-CoV-2-positive individuals demanded the use of inactivation protocols to ensure laboratory operators’ safety. While not standardized, these practices can be roughly divided into two categories, namely heat inactivation and solvent-detergent treatments. These routine procedures should also apply to samples intended for Extracellular Vesicles (EVs) analysis. Assessing the impact of virus-inactivating pre-treatments is therefore of pivotal importance, given the well-known variability introduced by different pre-analytical steps on downstream EVs isolation and analysis. Arguably, shared guidelines on inactivation protocols tailored to best address EVs-specific requirements will be needed among the analytical community, yet deep investigations in this direction have not yet been reported. We here provide insights into SARS-CoV-2 inactivation practices to be adopted prior to serum EVs analysis by comparing solvent/detergent treatment vs. heat inactivation. Our analysis entails the evaluation of EVs recovery and purity along with biochemical, biophysical and biomolecular profiling by means of a set of complementary analytical techniques: Nanoparticle Tracking Analysis, Western Blotting, Atomic Force Microscopy, miRNA content (digital droplet PCR) and tetraspanin assessment by microarrays. Our data suggest an increase in ultracentrifugation (UC) recovery following heat treatment; however, it is accompanied by a marked enrichment in EVs-associated contaminants. On the other hand, solvent/detergent treatment is promising for small EVs (<150 nm range), yet a depletion of larger vesicular entities was detected. This work represents a first step towards the identification of optimal serum inactivation protocols targeted to EVs analysis.

scholarly journals Multifunctional application of PVA-aided Zn–Fe–Mn coupled oxide nanocomposite

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Buzuayehu Abebe ◽  
H. C. Ananda Murthy ◽  
Enyew Amare Zereffa
Keyword(s):  
Charge Transfer ◽  
Analytical Techniques ◽  
Antibacterial Activities ◽  
Poly Vinyl Alcohol ◽  
Blue Dye ◽  
Ternary Oxide ◽  
Gram Positive Bacteria ◽  
Transfer Capability ◽  
Ft Ir ◽  
Synthesized Materials

AbstractZinc oxide (ZnO) is a fascinating semiconductor material with many applications such as adsorption, photocatalysis, sensor, and antibacterial activities. By using a poly (vinyl alcohol) (PVA) polymer as a capping agent and metal oxides (iron and manganese) as a couple, the porous PVA-aided Zn/Fe/Mn ternary oxide nanocomposite material (PTMO-NCM) was synthesized. The thermal, optical, crystallinity, chemical bonding, porosity, morphological, charge transfer properties of the synthesized materials were confirmed by DTG/DSC, UV–Vis-DRS, XRD, FT-IR, BET, SEM-EDAX/TEM-HRTEM-SAED, and CV/EIS/amperometric analytical techniques, respectively. The PTMO-NCM showed an enhanced surface area and charge transfer capability, compared to ZnO. Using the XRD pattern and TEM image analysis, the crystalline size of the materials was confirmed to be in the nanometer range. The porosity and superior charge transfer capabilities of the PTMO-NCM were confirmed from the BET, HRTEM (IFFT)/SAED, and CV/EIS analysis. The adsorption kinetics (adsorption reaction/adsorption diffusion) and adsorption isotherm test confirmed the presence of a chemisorption type of adsorbate/methylene blue dye-adsorbent/PTMO-NCM interaction. The photocatalytic performance was tested on the Congo red and Acid Orange-8 dyes. The superior ascorbic acid sensing capability of the material was understood from CV and amperometric analysis. The noble antibacterial activities of the material were also confirmed on both gram-negative and gram-positive bacteria.

scholarly journals Speciation of organosulfur compounds in carbonaceous chondrites

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alexander Zherebker ◽  
Yury Kostyukevich ◽  
Dmitry S. Volkov ◽  
Ratibor G. Chumakov ◽  
Lukas Friederici ◽  
...  
Keyword(s):  
Organic Matter ◽  
Analytical Techniques ◽  
Ion Cyclotron Resonance ◽  
Organosulfur Compounds ◽  
Low Oxygen ◽  
Fticr Ms ◽  
Insoluble Organic Matter ◽  
Composition And Structure ◽  
Extractable Fraction ◽  
The Individual

AbstractDespite broad application of different analytical techniques for studies on organic matter of chondrite meteorites, information about composition and structure of individual compounds is still very limited due to extreme molecular diversity of extraterrestrial organic matter. Here we present the first application of isotopic exchange assisted Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) for analysis of alkali extractable fraction of insoluble organic matter (IOM) of the Murchison and Allende meteorites. This allowed us to determine the individual S-containing ions with different types of sulfur atoms in IOM. Thiols, thiophenes, sulfoxides, sulfonyls and sulfonates were identified in both samples but with different proportions, which contribution corroborated with the hydrothermal and thermal history of the meteorites. The results were supported by XPS and thermogravimetric analysis coupled to FTICR MS. The latter was applied for the first time for analysis of chondritic IOM. To emphasize the peculiar extraterrestrial origin of IOM we have compared it with coal kerogen, which is characterized by the comparable complexity of molecular composition but its aromatic nature and low oxygen content can be ascribed almost exclusively to degradation of biomacromolecules.

scholarly journals Preparation, Thermal, and Thermo-Mechanical Characterization of Polymeric Blends Based on Di(meth)acrylate Monomers

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 878
Author(s):  
Krystyna Wnuczek ◽  
Andrzej Puszka ◽  
Łukasz Klapiszewski ◽  
Beata Podkościelna
Keyword(s):  
Mechanical Analysis ◽  
Attenuated Total Reflection ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Chemical Structures ◽  
Atomic Force ◽  
Polymeric Blends ◽  
Ft Ir ◽  
Acrylate Monomers ◽  
Synthesized Materials

This study presents the preparation and the thermo-mechanical characteristics of polymeric blends based on di(meth)acrylates monomers. Bisphenol A glycerolate diacrylate (BPA.GDA) or ethylene glycol dimethacrylate (EGDMA) were used as crosslinking monomers. Methyl methacrylate (MMA) was used as an active solvent in both copolymerization approaches. Commercial polycarbonate (PC) was used as a modifying soluble additive. The preparation of blends and method of polymerization by using UV initiator (Irqacure® 651) was proposed. Two parallel sets of MMA-based materials were obtained. The first included more harmless linear hydrocarbons (EGDMA + MMA), whereas the second included the usually used aromatic copolymers (BPA.GDA + MMA). The influence of different amounts of PC on the physicochemical properties was discussed in detail. Chemical structures of the copolymers were confirmed by attenuated total reflection–Fourier transform infrared (ATR/FT-IR) spectroscopy. Thermo-mechanical properties of the synthesized materials were investigated by means of differential scanning calorimetry (DSC), thermogravimetric (TG/DTG) analyses, and dynamic mechanical analysis (DMA). The hardness of the obtained materials was also tested. In order to evaluate the surface of the materials, their images were obtained with the use of atomic force microscopy (AFM).

Sign in / Sign up

Export Citation Format

Share Document