scholarly journals Organic Semiconductor Micro/Nanocrystals for Laser Applications

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 958
Author(s):  
Javier Álvarez-Conde ◽  
Eva M. García-Frutos ◽  
Juan Cabanillas-Gonzalez
Keyword(s):  
Organic Semiconductor ◽  
Light Emission ◽  
Low Cost ◽  
Solid State Lasers ◽  
Comprehensive Overview ◽  
Laser Applications ◽  
Resonator Design ◽  
Organic Solid ◽  
Recent Developments ◽  
Control Crystallization

Organic semiconductor micro/nanocrystals (OSMCs) have attracted great attention due to their numerous advantages such us free grain boundaries, minimal defects and traps, molecular diversity, low cost, flexibility and solution processability. Due to all these characteristics, they are strong candidates for the next generation of electronic and optoelectronic devices. In this review, we present a comprehensive overview of these OSMCs, discussing molecular packing, the methods to control crystallization and their applications to the area of organic solid-state lasers. Special emphasis is given to OSMC lasers which self-assemble into geometrically defined optical resonators owing to their attractive prospects for tuning/control of light emission properties through geometrical resonator design. The most recent developments together with novel strategies for light emission tuning and effective light extraction are presented.

Ambipolar injection in a submicron channel light-emitting tetracene transistor with distinct source and drain contacts

2004 ◽  
Vol 846 ◽  
Author(s):  
J. Reynaert ◽  
D. Cheyns ◽  
D. Janssen ◽  
V. I. Arkhipov ◽  
G. Borghs ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Organic Semiconductor ◽  
Light Emission ◽  
Low Cost ◽  
Channel Length ◽  
Light Emitting ◽  
Organic Light ◽  
Optimal Injection ◽  
Distinct Source ◽  
Effect Transistor

ABSTRACTOver the last decade, organic semiconductor thin film transistors have been the focus of many research groups because of their potential application in low-cost integrated circuits. Recently, an organic light-emitting field-effect transistor (OLEFET) was reported. In an OLEFET structure, optimal injection of both holes and electrons into the light-emitting layer are required for maximum quantum efficiency, whereas the gate serves as a controlling electrode. In this work, we achieved an OLFET structure with interdigitated hole-injecting Au and electron-injecting Ca contacts within a submicrometer channel length. Both contacts are bottom contacts to the upper-lying tetracene organic semiconductor. The study of IV-characteristics and light emission from these devices shined light on the underlying physics of the OLEFETs.

Organic solid-state lasers: a materials view and future development

2020 ◽  
Vol 49 (16) ◽  
pp. 5885-5944 ◽  
Author(s):  
Yi Jiang ◽  
Yuan-Yuan Liu ◽  
Xu Liu ◽  
He Lin ◽  
Kun Gao ◽  
...  
Keyword(s):  
Solid State ◽  
Semiconductor Lasers ◽  
Future Development ◽  
Organic Semiconductor ◽  
Research Field ◽  
Solid State Lasers ◽  
Organic Solid ◽  
Organic Solid State ◽  
Gain Media

This review introduces the design, opportunities, and challenges of organic gain media for organic solid-state lasers, especially for organic semiconductor lasers, providing a clear panorama for this interesting and exciting research field.

scholarly journals Magnetic iron oxide/clay nanocomposites for adsorption and catalytic oxidation in water treatment applications

2020 ◽  
Vol 18 (1) ◽  
pp. 1148-1166
Author(s):  
Ganjar Fadillah ◽  
Septian Perwira Yudha ◽  
Suresh Sagadevan ◽  
Is Fatimah ◽  
Oki Muraza
Keyword(s):  
Iron Oxide ◽  
Water Treatment ◽  
Photocatalytic Oxidation ◽  
Low Cost ◽  
Synthesis Method ◽  
Chemical Oxidation ◽  
Magnetic Iron Oxide ◽  
Oxidation Processes ◽  
Recent Developments ◽  
Physical And Chemical

AbstractPhysical and chemical methods have been developed for water and wastewater treatments. Adsorption is an attractive method due to its simplicity and low cost, and it has been widely employed in industrial treatment. In advanced schemes, chemical oxidation and photocatalytic oxidation have been recognized as effective methods for wastewater-containing organic compounds. The use of magnetic iron oxide in these methods has received much attention. Magnetic iron oxide nanocomposite adsorbents have been recognized as favorable materials due to their stability, high adsorption capacities, and recoverability, compared to conventional sorbents. Magnetic iron oxide nanocomposites have also been reported to be effective in photocatalytic and chemical oxidation processes. The current review has presented recent developments in techniques using magnetic iron oxide nanocomposites for water treatment applications. The review highlights the synthesis method and compares modifications for adsorbent, photocatalytic oxidation, and chemical oxidation processes. Future prospects for the use of nanocomposites have been presented.

scholarly journals Revisiting Electrochemical Biosensing in the 21st Century Society for Inflammatory Cytokines Involved in Autoimmune, Neurodegenerative, Cardiac, Viral and Cancer Diseases

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 189
Author(s):  
Susana Campuzano ◽  
Paloma Yáñez-Sedeño ◽  
José Manuel Pingarrón
Keyword(s):  
Point Of Care ◽  
Low Cost ◽  
Accurate Determination ◽  
Test Time ◽  
Electrochemical Biosensing ◽  
Recent Developments ◽  
Inflammatory Processes ◽  
Human Skills ◽  
Cancer Diseases

The multifaceted key roles of cytokines in immunity and inflammatory processes have led to a high clinical interest for the determination of these biomolecules to be used as a tool in the diagnosis, prognosis, monitoring and treatment of several diseases of great current relevance (autoimmune, neurodegenerative, cardiac, viral and cancer diseases, hypercholesterolemia and diabetes). Therefore, the rapid and accurate determination of cytokine biomarkers in body fluids, cells and tissues has attracted considerable attention. However, many currently available techniques used for this purpose, although sensitive and selective, require expensive equipment and advanced human skills and do not meet the demands of today’s clinic in terms of test time, simplicity and point-of-care applicability. In the course of ongoing pursuit of new analytical methodologies, electrochemical biosensing is steadily gaining ground as a strategy suitable to develop simple, low-cost methods, with the ability for multiplexed and multiomics determinations in a short time and requiring a small amount of sample. This review article puts forward electrochemical biosensing methods reported in the last five years for the determination of cytokines, summarizes recent developments and trends through a comprehensive discussion of selected strategies, and highlights the challenges to solve in this field. Considering the key role demonstrated in the last years by different materials (with nano or micrometric size and with or without magnetic properties), in the design of analytical performance-enhanced electrochemical biosensing strategies, special attention is paid to the methods exploiting these approaches.

scholarly journals Recent Developments of Antimony-Based Anodes for Sodium- and Potassium-Ion Batteries

2021 ◽  
Author(s):  
Bochao Chen ◽  
Ming Liang ◽  
Qingzhao Wu ◽  
Shan Zhu ◽  
Naiqin Zhao ◽  
...  
Keyword(s):  
Structural Characteristics ◽  
Low Cost ◽  
Potassium Ion ◽  
Research Progress ◽  
Research Directions ◽  
Weak Charge ◽  
Recent Developments ◽  
High Theoretical Capacity ◽  
Further Development ◽  
Sodium And Potassium

AbstractThe development of sodium-ion (SIBs) and potassium-ion batteries (PIBs) has increased rapidly because of the abundant resources and cost-effectiveness of Na and K. Antimony (Sb) plays an important role in SIBs and PIBs because of its high theoretical capacity, proper working voltage, and low cost. However, Sb-based anodes have the drawbacks of large volume changes and weak charge transfer during the charge and discharge processes, thus leading to poor cycling and rapid capacity decay. To address such drawbacks, many strategies and a variety of Sb-based materials have been developed in recent years. This review systematically introduces the recent research progress of a variety of Sb-based anodes for SIBs and PIBs from the perspective of composition selection, preparation technologies, structural characteristics, and energy storage behaviors. Moreover, corresponding examples are presented to illustrate the advantages or disadvantages of these anodes. Finally, we summarize the challenges of the development of Sb-based materials for Na/K-ion batteries and propose potential research directions for their further development.

The Single-Rotor Helicopter with Rigidly-Mounted Blades

1963 ◽  
Vol 67 (634) ◽  
pp. 651-663 ◽  
Author(s):  
R. R. Heppe
Keyword(s):  
General Public ◽  
Research Team ◽  
Low Cost ◽  
Second World War ◽  
Public Acceptance ◽  
World War ◽  
Mass Market ◽  
Recent Developments ◽  
Second World

For many years, studies of various light aircraft designs have been carried on by the Lockheed-California Company in search of a vehicle that had the potential of truly generating the “air age”—a vehicle which would perform a useful service to many people, in many jobs. Shortly after the Second World War, these studies were directed along the lines of present-day light aeroplanes, but were eventually discarded upon recognition of the limited utility of these vehicles when related to general public acceptance. However, in 1959, spurred by recent developments in VTOL craft, the Lockheed research team again raised the question, “Is it possible today to develop a vehicle of low cost and with sufficient utility to reach the mass market?”

scholarly journals Compact Miniaturized Bioluminescence Sensor Based on Continuous Air-Segmented Flow for Real-Time Monitoring: Application to Bile Salt Hydrolase (BSH) Activity and ATP Detection in Biological Fluids

Chemosensors ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 122
Author(s):  
Aldo Roda ◽  
Pierpaolo Greco ◽  
Patrizia Simoni ◽  
Valentina Marassi ◽  
Giada Moroni ◽  
...  
Keyword(s):  
Bile Salt ◽  
Light Emission ◽  
Ex Vivo ◽  
Biological Fluids ◽  
Low Cost ◽  
Bile Salt Hydrolase ◽  
Segmented Flow ◽  
Active Substrate ◽  
Flat Spiral ◽  
Bsh Activity

A simple and versatile continuous air-segmented flow sensor using immobilized luciferase was designed as a general miniaturized platform based on sensitive biochemiluminescence detection. The device uses miniaturized microperistaltic pumps to deliver flows and compact sensitive light imaging detectors based on BI-CMOS (smartphone camera) or CCD technology. The low-cost components and power supply make it suitable as out-lab device at point of need to monitor kinetic-related processes or ex vivo dynamic events. A nylon6 flat spiral carrying immobilized luciferase was placed in front of the detector in lensless mode using a fiber optic tapered faceplate. ATP was measured in samples collected by microdialysis from rat brain with detecting levels as low as 0.4 fmoles. The same immobilized luciferase was also used for the evaluation of bile salt hydrolase (BSH) activity in intestinal microbiota. An aminoluciferin was conjugatated with chenodeoxycholic acid forming the amide derivative aLuc-CDCA. The hydrolysis of the aLuc-CDCA probe by BSH releases free uncaged aminoluciferin which is the active substrate for luciferase leading to light emission. This method can detect as low as 0.5 mM of aLuc-CDCA, so it can be used on real faecal human samples to study BSH activity and its modulation by diseases and drugs.

scholarly journals Recent Developments of Reflectarray Antennas for Reconfigurable Beams Using Surface-Mounted RF-MEMS

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Eduardo Carrasco ◽  
Mariano Barba ◽  
Manuel Arrebola ◽  
Jose A. Encinar
Keyword(s):  
Phase Shifter ◽  
Rf Mems ◽  
Low Cost ◽  
Phase Control ◽  
Electronic Control ◽  
Delay Lines ◽  
Mems Switches ◽  
Manufacturing Complexity ◽  
Recent Developments ◽  
Control Devices

Some of the most recent developments in reconfigurable reflectarrays using surface-mounted RF-MEMS, which have been developed at the Universidad Politécnica de Madrid, are summarized in this paper. The results include reconfigurable elements based on patches aperture-coupled to delay lines in two configurations: single elements and gathered elements which form subarrays with common phase control. The former include traditional aperture-coupled elements and a novel wideband reflectarray element which has been designed using two stacked patches. The latter are proposed as a low cost solution for reducing the number of electronic control devices as well as the manufacturing complexity of large reflectarrays. The main advantages and drawbacks of the grouping are evaluated in both pencil and shaped-beam antennas. In all the cases, the effects of the MEMS switches and their assembly circuitry are evaluated when they are used in a 2-bit phase shifter which can be extended to more bits, demonstrating that the proposed elements can be used efficiently in reconfigurable-beam reflectarrays.

NEW PIEZOELECTRIC SUBSTRATES FOR SAW DEVICES

2000 ◽  
Vol 10 (04) ◽  
pp. 1017-1068 ◽  
Author(s):  
JOHN A. KOSINSKI
Keyword(s):  
Power Flow ◽  
Piezoelectric Materials ◽  
Low Cost ◽  
Temperature Phase ◽  
Flow Angle ◽  
Recent Developments ◽  
Temperature Coefficient Of Frequency ◽  
Piezoelectric Coupling ◽  
Strong Candidate ◽  
Diffraction Effects

Recent developments in single crystal piezoelectric materials have focused on the search for "ideal" materials with zero temperature coefficient of frequency orientations featuring jointly high piezoelectric coupling, high intrinsic Q, zero power flow angle, and minimized diffraction effects. In addition, the desired materials should have no low temperature phase transitions, and a physical chemistry conducive to repeatable, low cost growth and wafer scale device production. As difficult as it might seem to find such "ideal" materials, three completely different but strong candidate materials have emerged recently: the quartz homeotype gallium orthophosphate, the quartz isotype calcium gallo-germanates (langasite, langanite, langatate, etc.), and diomignite (lithium tetraborate). The current state-of-the-art and prospects for future development of these materials are considered.

scholarly journals Controlled Assembly of Nanorod TiO2 Crystals via a Sintering Process: Photoanode Properties in Dye-Sensitized Solar Cells

2017 ◽  
Vol 2017 ◽  
pp. 1-8
Author(s):  
Saeid Vafaei ◽  
Kazuhiro Manseki ◽  
Soki Horita ◽  
Masaki Matsui ◽  
Takashi Sugiura
Keyword(s):  
Solar Cells ◽  
Low Cost ◽  
Semiconductor Nanocrystals ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Sintering Process ◽  
Dye Sensitized ◽  
First Time ◽  
Sensitized Solar Cells ◽  
Control Crystallization

We present for the first time a synthetic method of obtaining 1D TiO2 nanorods with sintering methods using bundle-shaped 3D rutile TiO2 particles (3D BR-TiO2) with the dimensions of around 100 nm. The purpose of this research is (i) to control crystallization of the mixture of two kinds of TiO2 semiconductor nanocrystals, that is, 3D BR-TiO2 and spherical anatase TiO2 (SA-TiO2) on FTO substrate via sintering process and (ii) to establish a new method to create photoanodes in dye-sensitized solar cells (DSSCs). In addition, we focus on the preparation of low-cost and environmentally friendly titania electrode by adopting the “water-based” nanofluids. Our results provide useful guidance on how to improve the photovoltaic performance by reshaping the numerous 3D TiO2 particles to 1D TiO2-based electrodes with sintering technique.

Sign in / Sign up

Export Citation Format

Share Document