Characterization of Chemically Activated Pyrolytic Carbon Black Derived from Waste Tires as a Candidate for Nanomaterial Precursor

Pyrolysis is a feasible solution for environmental problems related to the inadequate disposal of waste tires, as it leads to the recovery of pyrolytic products such as carbon black, liquid fuels and gases. The characteristics of pyrolytic carbon black can be enhanced through chemical activation in order to produce the required properties for its application. In the search to make the waste tire pyrolysis process profitable, new applications of the pyrolytic solid products have been explored, such as for the fabrication of energy-storage devices and precursor in the synthesis of nanomaterials. In this study, waste tires powder was chemically activated using acid (H2SO4) and/or alkali (KOH) to recover pyrolytic carbon black with different characteristics. H2SO4 removed surface impurities more thoroughly, improving the carbon black’s surface area, while KOH increased its oxygen content, which improved the carbon black’s stability in water suspension. Pyrolytic carbon black was fully characterized by elemental analysis, inductively coupled plasma–optical emission spectrometry (ICP-OES), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), N2 adsorption/desorption, scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM-EDS), dynamic light scattering (DLS), and ζ potential measurement. In addition, the pyrolytic carbon black was used to explore its feasibility as a precursor for the synthesis of carbon dots; synthesized carbon dots were analyzed preliminarily by SEM and with a fluorescence microplate reader, revealing differences in their morphology and fluorescence intensity. The results presented in this study demonstrate the effect of the activating agent on pyrolytic carbon black from waste tires and provide evidence of the feasibility of using waste tires for the synthesis of nanomaterials such as carbon dots.

Download Full-text

Upgrading pyrolytic residue from waste tires to commercial carbon black

Waste Management & Research ◽

10.1177/0734242x18764292 ◽

2018 ◽

Vol 36 (5) ◽

pp. 436-444 ◽

Cited By ~ 18

Author(s):

Xue Zhang ◽

Hengxiang Li ◽

Qing Cao ◽

Li’e Jin ◽

Fumeng Wang

Keyword(s):

Carbon Black ◽

Value Added ◽

Pyrolytic Carbon ◽

Ultrasonic Waves ◽

Added Value ◽

Infrared Spectrometry ◽

Raman Spectrometry ◽

X Ray ◽

Waste Tires ◽

Commercial Carbon

The managing and recycling of waste tires has become a worldwide environmental challenge. Among the different disposal methods for waste tires, pyrolysis is regarded as a promising route. How to effectively enhance the added value of pyrolytic residue (PR) from waste tires is a matter of great concern. In this study, the PRs were treated with hydrochloric and hydrofluoric acids in turn under ultrasonic waves. The removal efficiency for the ash and sulfur was investigated. The pyrolytic carbon black (PCB) obtained after treating PR with acids was analyzed by X-ray fluorescence spectrophotometry, Fourier transform infrared spectrometry, X-ray diffractometry, laser Raman spectrometry, scanning electron microscopy, thermogravimetric (TG) analysis, and physisorption apparatus. The properties of PCB were compared with those of commercial carbon black (CCB) N326 and N339. Results showed PRs from waste tires were mainly composed of carbon, sulfur, and ash. The carbon in PCB was mainly from the CCB added during tire manufacture rather than from the pyrolysis of pure rubbers. The removal percentages for the ash and sulfur of PR are 98.33% (from 13.98 wt % down to 0.24 wt %) and 70.16% (from 1.81 wt % down to 0.54 wt %), respectively, in the entire process. The ash was mainly composed of metal oxides, sulfides, and silica. The surface properties, porosity, and morphology of the PCB were all close to those of N326. Therefore, PCB will be a potential alternative of N326 and reused in tire manufacture. This route successfully upgrades PR from waste tires to the high value-added CCB and greatly increases the overall efficiency of the waste tire pyrolysis industry.

Download Full-text

Surface Modification of Pyrolytic Carbon Black from Waste Tires and Its Use as Pigment for Offset Printing Ink

Chinese Journal of Chemical Engineering ◽

10.1016/s1004-9541(06)60130-4 ◽

2006 ◽

Vol 14 (5) ◽

pp. 654-659 ◽

Cited By ~ 4

Author(s):

Jie ZHOU ◽

Jingdai WANG ◽

Xiaohong REN ◽

Yongrong YANG ◽

Binbo JIANG

Keyword(s):

Surface Modification ◽

Carbon Black ◽

Pyrolytic Carbon ◽

Offset Printing ◽

Waste Tires ◽

Printing Ink

Download Full-text

Modified Activation Process for Supercapacitor Electrode Materials from African Maize Cob

Materials ◽

10.3390/ma13235412 ◽

2020 ◽

Vol 13 (23) ◽

pp. 5412

Author(s):

Moses Kigozi ◽

Ravi Kali ◽

Abdulhakeem Bello ◽

Balaji Padya ◽

Godwin Mong Kalu-Uka ◽

...

Keyword(s):

Activated Carbon ◽

Photoelectron Spectroscopy ◽

Electrode Materials ◽

Chemical Activation ◽

Mesoporous Structure ◽

Activation Process ◽

Energy Storage Devices ◽

Supercapacitor Electrode ◽

X Ray ◽

Bet Analysis

In this work, African maize cobs (AMC) were used as a rich biomass precursor to synthesize carbon material through a chemical activation process for application in electrochemical energy storage devices. The carbonization and activation were carried out with concentrated Sulphuric acid at three different temperatures of 600, 700 and 800 °C, respectively. The activated carbon exhibited excellent microporous and mesoporous structure with a specific surface area that ranges between 30 and 254 m2·g−1 as measured by BET analysis. The morphology and structure of the produced materials are analyzed through Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Boehm titration, X-ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy. X-ray photoelectron spectroscopy indicates that a considerable amount of oxygen is present in the materials. The functional groups in the activated carbon enhanced the electrochemical performance and improved the material’s double-layer capacitance. The carbonized composite activated at 700 °C exhibited excellent capacitance of 456 F g−1 at a specific current of 0.25 A g−1 in 6 M KOH electrolyte and showed excellent stability after 10,000 cycles. Besides being a low cost, the produced materials offer good stability and electrochemical properties, making them suitable for supercapacitor applications.

Download Full-text

XRF and PIXE Analysis of light and Dark Adapted Ocular Tissue

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100053619 ◽

1982 ◽

Vol 40 ◽

pp. 190-191

Author(s):

B. J. Panessa ◽

H. W. Kraner ◽

J. B. Warren ◽

K. W. Jones

Keyword(s):

Trace Metals ◽

Pigment Epithelium ◽

Nerve Impulse ◽

Light Response ◽

Ocular Tissue ◽

Emission Spectrometry ◽

Retinol Dehydrogenase ◽

Pixe Analysis ◽

X Ray ◽

Optimal Function

During photoexcitation the retina requires specific electrolytes and trace metals for optimal function (Na, Mg, Cl, K, Ca, S, P, Cu and Zn). According to Hagins (1981), photoexcitation and generation of a nerve impulse involves the movement of Ca from the rhodopsin-ladened membranes of the rod outer segment (ROS) to the plasmalemma, which in turn decreases the in-flow of Na into the photoreceptor, resulting in hyperpolarization. In toad isolated retinas, the presence of Ba has been found to increase the amplitude and prolong the delay of the light response (Brown and Flaming, 1978). Trace metals such as Cu, Zn and Se are essential for the activity of the metalloenzymes of the retina and retina pigment epithelium (RPE) (i.e. carbonic anhydrase, retinol dehydrogenase, tyrosinase, glutathione peroxidase, superoxide dismutase...). Therefore the content and fluctuations of these elements in the retina and choroid are of fundamental importance for the maintenance of vision. This paper presents elemental data from light and dark adapted frog ocular tissues examined by electron beam induced x-ray microanalysis, x-ray fluorescence spectrometry (XRF) and proton induced x-ray emission spectrometry (PIXE).

Download Full-text

Nitrogen and Sulfur Co-doped Fluorescent Carbon Dots for the Detection of Morin and Cell Imaging

Current Analytical Chemistry ◽

10.2174/1573411014666180904104629 ◽

2018 ◽

Vol 15 (1) ◽

pp. 47-55

Author(s):

Xuebing Li ◽

Haifen Yang ◽

Ning Wang ◽

Tijian Sun ◽

Wei Bian ◽

...

Keyword(s):

Microwave Heating ◽

Fluorescent Probe ◽

Fluorescence Intensity ◽

Carbon Dots ◽

Cell Imaging ◽

Water Soluble ◽

Heating Process ◽

X Ray ◽

Doped Carbon Dots ◽

Co Doped

Background: Morin has many pharmacological functions including antioxidant, anticancer, anti-inflammatory, and antibacterial effects. It is commonly used in the treatment of antiviral infection, gastropathy, coronary heart disease and hepatitis B in clinic. However, researches have shown that morin is likely to show prooxidative effects on the cells when the amount of treatment is at high dose, leading to the decrease of intracellular ATP levels and the increase of necrosis process. Therefore, it is necessary to determine the concentration of morin in biologic samples. Method: Novel water-soluble and green nitrogen and sulfur co-doped carbon dots (NSCDs) were prepared by a microwave heating process with citric acid and L-cysteine. The fluorescence spectra were collected at an excitation wavelength of 350 nm when solutions of NSCDs were mixed with various concentrations of morin. Results: The as-prepared NSCDs were characterized by transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The fluorescence intensity of NSCDs decreased significantly with the increase of morin concentration. The fluorescence intensity of NSCDs displayed a linear response to morin in the concentration 0.10-30 μM with a low detection limit of 56 nM. The proposed fluorescent probe was applied to analysis of morin in human body fluids with recoveries of 98.0-102%. Conclusion: NSCDs were prepared by a microwave heating process. The present analytical method is sensitive to morin. The quenching process between NSCDs and morin is attributed to the static quenching. In addition, the cellular toxicity on HeLa cells indicated that the as-prepared NSCDs fluorescent probe does not show obvious cytotoxicity in cell imaging. Our proposed method possibly opens up a rapid and nontoxic way for preparing heteroatom doped carbon dots with a broad application prospect.

Download Full-text

Novel Carbon Dots Derived from Glycyrrhizae Radix et Rhizoma and Their Anti-Gastric Ulcer Effect

Molecules ◽

10.3390/molecules26061512 ◽

2021 ◽

Vol 26 (6) ◽

pp. 1512

Author(s):

Yuhan Liu ◽

Meiling Zhang ◽

Jinjun Cheng ◽

Yue Zhang ◽

Hui Kong ◽

...

Keyword(s):

Gastric Ulcer ◽

Photoelectron Spectroscopy ◽

Carbon Dots ◽

High Performance ◽

Raw264.7 Cells ◽

Mice Model ◽

X Ray ◽

Glycyrrhizae Radix ◽

Transmission Electron ◽

High Resolution Tem

Glycyrrhizae Radix et Rhizoma (GRR) is one of the commonly used traditional Chinese medicines in clinical practice, which has been applied to treat digestive system diseases for hundreds of years. GRR is preferred for anti-gastric ulcer, however, the main active compounds are still unknown. In this study, GRR was used as precursor to synthesize carbon dots (CDs) by a environment-friendly one-step pyrolysis process. GRR-CDs were characterized by using transmission electron microscopy, high-resolution TEM, fourier transform infrared, ultraviolet-visible and fluorescence spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and high-performance liquid chromatography. In addition, cellular toxicity of GRR-CDs was studied by using CCK-8 in RAW264.7 cells, and the anti-gastric ulcer activity was evaluated and confirmed using mice model of acute alcoholic gastric ulcer. The experiment confirmed that GRR-CDs were the spherical structure with a large number of active groups on the surface and their particle size ranged from 2 to 10 nm. GRR-CDs had no toxicity to RAW264.7 cells at concentration of 19.5 to 5000 μg/mL and could reduce the oxidative damage of gastric mucosa and tissues caused by alcohol, as demonstrated by restoring expression of malondialdehyde, superoxide dismutase and nitric oxide in serum and tissue of mice. The results indicated the explicit anti-ulcer activity of GRR-CDs, which provided a new insights for the research on effective material basis of GRR.

Download Full-text

Enhancement of Chloroprene/Natural/Butadiene Rubber Nanocomposite Properties Using Organoclays and Their Combination with Carbon Black as Fillers

Polymers ◽

10.3390/polym13071085 ◽

2021 ◽

Vol 13 (7) ◽

pp. 1085

Author(s):

Patricia Castaño-Rivera ◽

Isabel Calle-Holguín ◽

Johanna Castaño ◽

Gustavo Cabrera-Barjas ◽

Karen Galvez-Garrido ◽

...

Keyword(s):

Mechanical Properties ◽

Carbon Black ◽

High Performance ◽

Rubber Matrix ◽

Butadiene Rubber ◽

X Ray Diffraction ◽

X Ray ◽

Rubber Blends ◽

Ft Ir ◽

Chloroprene Rubber

Organoclay nanoparticles (Cloisite® C10A, Cloisite® C15) and their combination with carbon black (N330) were studied as fillers in chloroprene/natural/butadiene rubber blends to prepare nanocomposites. The effect of filler type and load on the physical mechanical properties of nanocomposites was determined and correlated with its structure, compatibility and cure properties using Fourier Transformed Infrared (FT-IR), X-ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and rheometric analysis. Physical mechanical properties were improved by organoclays at 5–7 phr. Nanocomposites with organoclays exhibited a remarkable increase up to 46% in abrasion resistance. The improvement in properties was attributed to good organoclay dispersion in the rubber matrix and to the compatibility between them and the chloroprene rubber. Carbon black at a 40 phr load was not the optimal concentration to interact with organoclays. The present study confirmed that organoclays can be a reinforcing filler for high performance applications in rubber nanocomposites.

Download Full-text

Wet compounding with pyrolytic carbon black from waste tyre for manufacture of new tyre – A mini review

Waste Management & Research ◽

10.1177/0734242x211004746 ◽

2021 ◽

pp. 0734242X2110047

Author(s):

Junqing Xu ◽

Jiaxue Yu ◽

Wenzhi He ◽

Juwen Huang ◽

Junshi Xu ◽

...

Keyword(s):

Carbon Black ◽

Pyrolytic Carbon ◽

Research Progress ◽

Rubber Matrix ◽

Innovative Technology ◽

Nano Materials ◽

Natural Rubber Composites ◽

Waste Tyres ◽

Dry Mixing ◽

Waste Tyre

Pyrolysis offers a more focused alternative to waste tyres treatment. Pyrolytic carbon black (CBp), the main product of waste tyre pyrolysis, and its modified species can be applied to tyre manufacturing realizing its high-value utilization. Modified pyrolytic carbon black/natural rubber composites prepared by a wet compounding (WC) and latex mixing process have become an innovative technology route for waste tyre remanufacturing. The main properties and applications of CBp reported in recent years are reviewed, and the main difficulties affecting its participation in tyre recycling are pointed out. The research progress of using WC technology to replace dry mixing manufacturing of new tyres is summarized. Through literature data and comparative studies, this paper points out that the characteristic of high ash content can be well utilized if CBp is applied to tyre manufacturing. This mini-review proposes a new method for high-value utilization of CBp. The composite mixing of CBp and carbon nano-materials under wet conditions is conducive to the realization of their good dispersion in the rubber matrix. This provides a new idea for customer resource integration and connection of industry development between the tyre production industry and waste tyre disposal management.

Download Full-text

Synchrotron Radiation Spectroscopy and Transmission Electron Microscopy Techniques to Evaluate TiO2 NPs Incorporation, Speciation, and Impact on Root Cells Ultrastructure of Pisum sativum L. Plants

Nanomaterials ◽

10.3390/nano11040921 ◽

2021 ◽

Vol 11 (4) ◽

pp. 921

Author(s):

Simonetta Muccifora ◽

Hiram Castillo-Michel ◽

Francesco Barbieri ◽

Lorenza Bellani ◽

Monica Ruffini Castiglione ◽

...

Keyword(s):

Electron Microscopy ◽

Transmission Electron Microscopy ◽

Synchrotron Radiation ◽

Pisum Sativum ◽

Emission Spectrometry ◽

Root Cells ◽

Tio2 Nps ◽

X Ray ◽

Pisum Sativum L ◽

Transmission Electron

Biosolids (Bs) for use in agriculture are an important way for introducing and transferring TiO2 nanoparticles (NPs) to plants and food chain. Roots of Pisum sativum L. plants grown in Bs-amended soils spiked with TiO2 800 mg/kg as rutile NPs, anatase NPs, mixture of both NPs and submicron particles (SMPs) were investigated by Transmission Electron Microscopy (TEM), synchrotron radiation based micro X-ray Fluorescence and micro X-ray Absorption Near-Edge Structure (µXRF/µXANES) and Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). TEM analysis showed damages in cells ultrastructure of all treated samples, although a more evident effect was observed with single anatase or rutile NPs treatments. Micro-XRF and TEM evidenced the presence of nano and SMPs mainly in the cortex cells near the rhizodermis. Micro-XRF/micro-XANES analysis revealed anatase, rutile, and ilmenite as the main TiO2 polymorphs in the original soil and Bs, and the preferential anatase uptake by the roots. For all treatments Ti concentration in the roots increased by 38–56%, however plants translocation factor (TF) increased mostly with NPs treatment (261–315%) and less with SMPs (about 85%), with respect to control. In addition, all samples showed a limited transfer of TiO2 to the shoots (very low TF value). These findings evidenced a potential toxicity of TiO2 NPs present in Bs and accumulating in soil, suggesting the necessity of appropriate regulations for the occurrence of NPs in Bs used in agriculture.

Download Full-text

Distribution and Mode of Occurrence of Co, Ni, Cu, Zn, As, Ag, Cd, Sb, Pb in the Feed Coal, Fly Ash, Slag, in the Topsoil and in the Roots of Trees and Undergrowth Downwind of Three Power Stations in Poland

Minerals ◽

10.3390/min11020133 ◽

2021 ◽

Vol 11 (2) ◽

pp. 133

Author(s):

Henryk R. Parzentny ◽

Leokadia Róg

Keyword(s):

Inductively Coupled Plasma ◽

Coal Fly Ash ◽

Atomic Emission ◽

Emission Spectrometry ◽

Plasma Atomic Emission Spectrometry ◽

X Ray ◽

Inductively Coupled ◽

Power Stations ◽

Mode Of Occurrence ◽

Feed Coal

It is supposed that the determination of the content and the mode of occurrence of ecotoxic elements (EE) in feed coal play the most significant role in forecasting distribution of EE in the soil and plants in the vicinity of power stations. Hence, the aim of the work was to analyze the properties of the feed coal, the combustion residues, and the topsoil which are reached by EE together with dust from power stations. The mineral and organic phases, which are the main hosts of EE, were identified by microscopy, X-ray powder diffraction, inductively coupled plasma atomic emission spectrometry, and scanning electron microscope with an energy dispersive X-ray methods. The highest content of elements was observed in the Oi and Oe subhorizons of the topsoil. Their hosts are various types of microspheres and char, emitted by power stations. In the areas of long-term industrial activity, there are also sharp-edged grains of magnetite emitted in the past by zinc, lead, and ironworks. The enrichment of the topsoil with these elements resulted in the increase in the content of EE, by between 0.2 times for Co; and 41.0 times for Cd in the roots of Scots pine, common oak and undergrowth, especially in the rhizodermis and the primary cortex and, more seldom, in the axle roller and cortex cells.

Download Full-text