scholarly journals Biomimetic Hydroxyapatite on Graphene Supports for Biomedical Applications: A Review

Nanomaterials ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1435 ◽  
Author(s):  
Gang Wei ◽  
Coucong Gong ◽  
Keke Hu ◽  
Yabin Wang ◽  
Yantu Zhang
Keyword(s):  
Biomedical Applications ◽  
High Performance ◽  
Environmental Science ◽  
Materials Science ◽  
Low Cost ◽  
Biomimetic Synthesis ◽  
Synthesis Methods ◽  
Design And Synthesis ◽  
High Performance Composite ◽  
Biomimetic Hydroxyapatite

Hydroxyapatite (HA) has been widely used in fields of materials science, tissue engineering, biomedicine, energy and environmental science, and analytical science due to its simple preparation, low-cost, and high biocompatibility. To overcome the weak mechanical properties of pure HA, various reinforcing materials were incorporated with HA to form high-performance composite materials. Due to the unique structural, biological, electrical, mechanical, thermal, and optical properties, graphene has exhibited great potentials for supporting the biomimetic synthesis of HA. In this review, we present recent advance in the biomimetic synthesis of HA on graphene supports for biomedical applications. More focuses on the biomimetic synthesis methods of HA and HA on graphene supports, as well as the biomedical applications of biomimetic graphene-HA nanohybrids in drug delivery, cell growth, bone regeneration, biosensors, and antibacterial test are performed. We believe that this review is state-of-the-art, and it will be valuable for readers to understand the biomimetic synthesis mechanisms of HA and other bioactive minerals, at the same time it can inspire the design and synthesis of graphene-based novel nanomaterials for advanced applications.

scholarly journals Electrospinning Nanoparticles-Based Materials Interfaces for Sensor Applications

Sensors ◽  
2019 ◽  
Vol 19 (18) ◽  
pp. 3977 ◽  
Author(s):  
Zhang ◽  
Jia ◽  
Liu ◽  
Wei ◽  
Su
Keyword(s):  
High Performance ◽  
Environmental Science ◽  
Materials Science ◽  
Functional Materials ◽  
Label Free ◽  
Structure Property ◽  
Metallic Oxide ◽  
Electrospinning Technique ◽  
Sensor Applications ◽  
Surface Enhanced Raman

Electrospinning is a facile technique to fabricate nanofibrous materials with adjustable structure, property, and functions. Electrospun materials have exhibited wide applications in the fields of materials science, biomedicine, tissue engineering, energy storage, environmental science, sensing, and others. In this review, we present recent advance in the fabrication of nanoparticles (NPs)-based materials interfaces through electrospinning technique and their applications for high-performance sensors. To achieve this aim, first the strategies for fabricating various materials interfaces through electrospinning NPs, such as metallic, oxide, alloy/metal oxide, and carbon NPs, are demonstrated and discussed, and then the sensor applications of the fabricated NPs-based materials interfaces in electrochemical, electric, fluorescent, colorimetric, surface-enhanced Raman scattering, photoelectric, and chemoresistance-based sensing and detection are presented and discussed in detail. We believe that this study will be helpful for readers to understand the fabrication of functional materials interfaces by electrospinning, and at the same time will promote the design and fabrication of electrospun nano/micro-devices for wider applications in bioanalysis and label-free sensors.

scholarly journals III–V Nanowires: Synthesis, Property Manipulations, and Device Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Ming Fang ◽  
Ning Han ◽  
Fengyun Wang ◽  
Zai-xing Yang ◽  
SenPo Yip ◽  
...  
Keyword(s):  
High Performance ◽  
Low Cost ◽  
Volume Ratio ◽  
Chemical Vapor ◽  
Cost Effective ◽  
Research Field ◽  
Synthesis Methods ◽  
Comprehensive Overview ◽  
Device Applications ◽  
Property Control

III–V semiconductor nanowire (NW) materials possess a combination of fascinating properties, including their tunable direct bandgap, high carrier mobility, excellent mechanical flexibility, and extraordinarily large surface-to-volume ratio, making them superior candidates for next generation electronics, photonics, and sensors, even possibly on flexible substrates. Understanding the synthesis, property manipulation, and device integration of these III–V NW materials is therefore crucial for their practical implementations. In this review, we present a comprehensive overview of the recent development in III–V NWs with the focus on their cost-effective synthesis, corresponding property control, and the relevant low-operating-power device applications. We will first introduce the synthesis methods and growth mechanisms of III–V NWs, emphasizing the low-cost solid-source chemical vapor deposition (SSCVD) technique, and then discuss the physical properties of III–V NWs with special attention on their dependences on several typical factors including the choice of catalysts, NW diameters, surface roughness, and surface decorations. After that, we present several different examples in the area of high-performance photovoltaics and low-power electronic circuit prototypes to further demonstrate the potential applications of these NW materials. Towards the end, we also make some remarks on the progress made and challenges remaining in the III–V NW research field.

scholarly journals Strength and dynamic characteristics analyses of wound composite axial impeller

2012 ◽  
Vol 2 (1) ◽  
Author(s):  
Jifeng Wang ◽  
Jorge Olortegui-Yume ◽  
Norbert Müller
Keyword(s):  
Dynamic Characteristics ◽  
High Performance ◽  
Low Cost ◽  
Three Dimensional ◽  
Design Parameters ◽  
Modal Shape ◽  
Kevlar Fiber ◽  
Start Up ◽  
High Performance Composite ◽  
Wound Composite

AbstractA low cost, light weight, high performance composite material turbomachinery impeller with a uniquely designed blade patterns is analyzed. Such impellers can economically enable refrigeration plants to use water as a refrigerant (R718). A strength and dynamic characteristics analyses procedure is developed to assess the maximum stresses and natural frequencies of these wound composite axial impellers under operating loading conditions. Numerical simulation using FEM for two-dimensional and three-dimensional impellers was investigated. A commercially available software ANSYS is used for the finite element calculations. Analysis is done for different blade geometries and then suggestions are made for optimum design parameters. In order to avoid operating at resonance, which can make impellers suffer a significant reduction in the design life, the designer must calculate the natural frequency and modal shape of the impeller to analyze the dynamic characteristics. The results show that using composite Kevlar fiber/epoxy matrix enables the impeller to run at high tip speed and withstand the stresses, no critical speed will be matched during start-up and shut-down, and that mass imbalances of the impeller shall not pose a critical problem.

scholarly journals Electrochemical Sensors and Biosensors for the Analysis of Tea Components: A Bibliometric Review

2022 ◽  
Vol 9 ◽  
Author(s):  
Jinhua Shao ◽  
Chao Wang ◽  
Yiling Shen ◽  
Jinlei Shi ◽  
Dongqing Ding
Keyword(s):  
Bibliometric Analysis ◽  
High Performance ◽  
Electrochemical Sensors ◽  
Materials Science ◽  
Low Cost ◽  
Relevant Literature ◽  
Electrochemical Techniques ◽  
High Sensitivity ◽  
Electrochemical Analysis ◽  
Electrochemical Biosensing

Tea is a popular beverage all around the world. Tea composition, quality monitoring, and tea identification have all been the subject of extensive research due to concerns about the nutritional value and safety of tea intake. In the last 2 decades, research into tea employing electrochemical biosensing technologies has received a lot of interest. Despite the fact that electrochemical biosensing is not yet the most widely utilized approach for tea analysis, it has emerged as a promising technology due to its high sensitivity, speed, and low cost. Through bibliometric analysis, we give a systematic survey of the literature on electrochemical analysis of tea from 1994 to 2021 in this study. Electrochemical analysis in the study of tea can be split into three distinct stages, according to the bibliometric analysis. After chromatographic separation of materials, electrochemical techniques were initially used only as a detection tool. Many key components of tea, including as tea polyphenols, gallic acid, caffeic acid, and others, have electrochemical activity, and their electrochemical behavior is being investigated. High-performance electrochemical sensors have steadily become a hot research issue as materials science, particularly nanomaterials, and has progressed. This review not only highlights these processes, but also analyzes and contrasts the relevant literature. This evaluation also provides future views in this area based on the bibliometric findings.

Mechanical Design of Wound Composite Impeller Using FEM

2010 ◽  
Author(s):  
Jifeng Wang ◽  
Mohit Patil ◽  
Jorge Olortegui-Yume ◽  
Norbert Mu¨ller
Keyword(s):  
High Performance ◽  
Mechanical Design ◽  
Low Cost ◽  
Design Parameters ◽  
Rotating Speed ◽  
Characteristics Analysis ◽  
High Performance Composite ◽  
The Relationship ◽  
Dynamic Characteristics Analysis ◽  
Wound Composite

A low-cost, light-weight, high-performance, composite turbomachinery impeller with uniquely designed blade patterns is analyzed. Such impellers can economically enable refrigeration plants to use water as a refrigerant (R718). A stress and vibration analyses procedure is developed to assess the maximum stresses and natural frequencies of these wound composite axial impellers under operating loading conditions using Finite Element Method. A commercially available software ANSYS is used for the FE calculations. Analysis is done for two different blade geometries and then suggestions are made for optimum design parameters. The relationship between impeller natural frequency and rotating speed is also determined based on dynamic characteristics analysis.

scholarly journals Recent Advance in the Fabrication of 2D and 3D Metal Carbides-Based Nanomaterials for Energy and Environmental Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 246
Author(s):  
Keming Wan ◽  
Yalin Li ◽  
Yan Wang ◽  
Gang Wei
Keyword(s):  
Environmental Science ◽  
Materials Science ◽  
2D Materials ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Environmental Applications ◽  
Synthesis Methods ◽  
Metal Carbides ◽  
New Family ◽  
2D And 3D

Two-dimensional (2D) nanomaterials have attracted increased interest and exhibited extended applications from nanotechnology to materials science, biomedicine, tissue engineering, as well as energy storage and environmental science. With the development of the synthesis and fabrication of 2D materials, a new family of 2D materials, metal carbides (MCs), revealed promising applications in recent years, and have been utilized for the fabrication of various functional 2D and three-dimensional (3D) nanomaterials for energy and environmental applications, ascribing to the unique physical and chemical properties of MCs. In this review, we present recent advance in the synthesis, fabrication, and applications of 2D and 3D MC-based nanomaterials. For this aim, we first summarize typical synthesis methods of MCs, and then demonstrate the progress on the fabrication of 2D and 3D MC-based nanomaterials. To the end, the applications of MC-based 2D and 3D materials for chemical batteries, supercapacitors, water splitting, photodegradation, removal of heavy metals, and electromagnetic shielding are introduced and discussed. This work provides useful information on the preparation, hybridization, structural tailoring, and applications of MC-based materials, and is expected to inspire the design and fabrication of novel and functional MXene materials with improved performance.

scholarly journals Electroless Plating of High-Performance Composite Pd Membranes with EDTA-Free Bath

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4894
Author(s):  
Jun-Yi Wang ◽  
Yen-Hsun Chi ◽  
Jin-Hua Huang
Keyword(s):  
Electroless Plating ◽  
High Performance ◽  
High Selectivity ◽  
Hydrogen Permeation ◽  
Low Cost ◽  
Cycling Stability ◽  
Plating Bath ◽  
High Hydrogen ◽  
High Performance Composite ◽  
Sequential Addition

High-performance composite Pd membranes were successfully fabricated using electroless plating with an EDTA-free bath. The plating started with employing the one-time addition of hydrazine. In the experiment, the hydrazine concentrations and plating bath volumes were systematically varied to optimize the plating. The optimum composite Pd membrane tube showed high H2 permeance of 4.4 × 10−3 mol/m2 s Pa0.5 and high selectivity of 1.6 × 104, but poor cycling stability. Then, a method of sequential addition of the hydrazine from the high to low concentrations was employed. The resultant membrane, about 6 μm thick, still exhibited a high selectivity of 6.8 × 104 as well as a much-improved plating yield and cycling stability level; this membrane outperformed the membrane made using the unmodified plating technique with the EDTA-contained bath. This result indicates the EDTA-free bath combined with the sequential addition of hydrazine is a simple, low-cost, yet effective method for preparing thin, dense composite Pd membranes featuring high hydrogen permeation flux and high thermal durability.

scholarly journals Design of a new rotary dobby mechanism

2019 ◽  
Vol 69 (06) ◽  
pp. 429-433
Author(s):  
CAN ÖZGÜN ◽  
ABDULLA GABİL
Keyword(s):  
High Performance ◽  
Low Cost ◽  
Advanced Technology ◽  
Drive Mechanism ◽  
Design And Synthesis ◽  
Working Performance ◽  
Experimental Values ◽  
The Cost ◽  
Selection Mechanisms ◽  
Oscillating Motion

Special cam mechanisms which require advanced technology are used in the drive mechanism of nowadays rotary dobbies. Electromagnets are generally preferred in the selection mechanisms which increase the cost of production and make the maintenance more difficult. This work aims to design a new rotary dobby different from the other dobbies. First of all, the design and synthesis of a new drive mechanism with eight members, equal and double standby at 180° oscillating motion was developed. The results of the research revealed that both the theoretical and the experimental values of the waiting angles of drive mechanism are compatible with each other. Thus, it has been proposed that designed mechanism can be used instead of the special cams mechanisms in the rotary dobbies. Pneumatic pistons and locks have been used in the selection mechanism of rotating dobby developed in the study. During the performence tests, it has been observed that the pneumatic piston and locks can be used instead of the electromagnets by providing that they work in harmony with each other. As a conclusion, when the working performance of dobby was observed, it was confirmed that dobby worked with a high performance and durably with all of its mechanisms. Additionally the shedding process was precisely carried out. Finally a new rotary dobby which was easy to construct with low cost has been designed and produced.

scholarly journals Plastic and low-cost axial zero thermal expansion alloy by a natural dual-phase composite

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Chengyi Yu ◽  
Kun Lin ◽  
Suihe Jiang ◽  
Yili Cao ◽  
Wenjie Li ◽  
...  
Keyword(s):  
Thermal Expansion ◽  
High Performance ◽  
Eutectic Reaction ◽  
Low Cost ◽  
Cycling Performance ◽  
Synthesis Methods ◽  
Dual Phase ◽  
Electrical Conductivities ◽  
One Step ◽  
In Situ Neutron Diffraction

AbstractZero thermal expansion (ZTE) alloys possess unique dimensional stability, high thermal and electrical conductivities. Their practical application under heat and stress is however limited by their inherent brittleness because ZTE and plasticity are generally exclusive in a single-phase material. Besides, the performance of ZTE alloys is highly sensitive to change of compositions, so conventional synthesis methods such as alloying or the design of multiphase to improve its thermal and mechanical properties are usually inapplicable. In this study, by adopting a one-step eutectic reaction method, we overcome this challenge. A natural dual-phase composite with ZTE and plasticity was synthesized by melting 4 atom% holmium with pure iron. The dual-phase alloy shows moderate plasticity and strength, axial zero thermal expansion, and stable thermal cycling performance as well as low cost. By using synchrotron X-ray diffraction, in-situ neutron diffraction and microscopy, the critical mechanism of dual-phase synergy on both thermal expansion regulation and mechanical property enhancement is revealed. These results demonstrate that eutectic reaction is likely to be a universal and effective method for the design of high-performance intermetallic-compound-based ZTE alloys.

New Advances in Molding and Printing Processes for Organic/Plastic Electronics Using Chemically Modified Stiff, Photocured Poly (dimethylsiloxane) (PDMS) Elastomers Designed for Nano-Resolution Soft Lithography

2003 ◽  
Vol 788 ◽  
Author(s):  
Kyung M. Choi ◽  
John A. Rogers
Keyword(s):  
Soft Lithography ◽  
High Performance ◽  
Low Cost ◽  
Pattern Transfer ◽  
Pdms Stamp ◽  
Organic Plastic ◽  
Plastic Electronics ◽  
Design And Synthesis ◽  
Nano Scale ◽  
Printing Processes

ABSTRACTThe development of new materials for organic/plastic electronics allows us to fabricate novel devices through unconventional approaches. The ‘soft lithography technique’ has been widely used in replicating and fabricating small features. This technique is a low cost alternative to photolithography by generating structures from masters to substrates, which employ ‘elastomeric materials’, such as highly stretchable silicon elastomer, polydimethylsiloxane (PDMS) to replicate or transfer the original features to a variety of substrates by molding and printing processes. Since the resolution of pattern transfer significantly relies on the performance of polydimethylsiloxane (PDMS) stamp materials, commercial PDMS materials have shown limitations in high fidelity pattern transfer due to their low physical toughness and high thermal expansion coefficients. For those reasons, pattern fabrications using conventional PDMS materials are unable to satisfy our set of diverse demands, especially in the area of nano-scale replication. To achieve high performance in molding and printing, here we introduce a new strategy, design and synthesis of a modified PDMS silicon elastomer that is a stiffer and photocurable element to achieve our specific task of nano-scale resolution soft lithography. We then demonstrated its unique capabilities for the case of nano-features (300 nm wide) with narrow and tall heights (600 nm height) of photoresist, which is one of the most challenging ‘nano-patterning’ tasks in advanced soft lithography, which is often limited in its use at the nano-scale with other commercially available elastomers.

Sign in / Sign up

Export Citation Format

Share Document