scholarly journals Defective Bismuth Oxide as Effective Adsorbent for Arsenic Removal from Water and Wastewater

Toxics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 158
Author(s):  
Ramona Balint ◽  
Mattia Bartoli ◽  
Pravin Jagdale ◽  
Alberto Tagliaferro ◽  
Abdul Samad Memon ◽  
...  
Keyword(s):  
Solid State ◽  
Bismuth Oxide ◽  
Arsenic Removal ◽  
Ph Values ◽  
Wide Range ◽  
Adsorption Processes ◽  
Water And Wastewater ◽  
Competing Ions ◽  
Adsorbent Materials

In this work, we report solid-state synthetized defective Bi2O3 containing Bi(V) sites as effective and recyclable arsenic adsorbent materials. Bi2O3 was extensively characterized, and structure-related adsorption processes are reported. Both As(V) and As(III) species-adsorption processes were investigated in a wide range of concentrations, pH values, and times. The effect of several competing ions was also tested together with the adsorbent recyclability.

As(III) Removal by Dynamic Adsorption onto Amberlite XAD7 Functionalized with Crown Ether and Doped with Fe(III) Ions

2019 ◽  
Vol 70 (7) ◽  
pp. 2330-2334
Author(s):  
Mihaela Ciopec ◽  
Adina Negrea ◽  
Narcis Duteanu ◽  
Corneliu Mircea Davidescu ◽  
Iosif Hulka ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Arsenic Removal ◽  
Arsenic Concentration ◽  
Fixed Bed ◽  
World Health ◽  
Arsenic Content ◽  
Arsenic Adsorption ◽  
Stage Of Development ◽  
Wide Range ◽  
Health Organization

Arsenic content in groundwater�s present a wide range of concentration, ranging from hundreds of micrograms to thousands of micrograms of arsenic per litter, while the maximum permitted arsenic concentration established by World Health Organization (WHO) is 10 mg L-1. According to the WHO all people, regardless of their stage of development and their social economic condition, have the right to have access to adequate drinking water. The most efficient and economic technique used for arsenic removal is represented by adsorption. In order to make this remediation technique more affordable and environmentally friendly is important to new materials with advance adsorbent properties. Novelty of present paper is represented by the usage of a new adsorbent material obtained by physical - chemical modification of Amberlite XAD polymers using crown ethers followed by iron doping, due to well-known affinity of arsenic for iron ions. Present paper aims to test the obtained modified Amberlite polymer for arsenic removal from real groundwater by using adsorption in a fixed bed column, establishing in this way a mechanism for the adsorption process. During experimental work was studied the influence of competing ions from real water into the arsenic adsorption process.

Nitrogen Removal from Anaerobically-Treated Leachate

1984 ◽  
Vol 19 (1) ◽  
pp. 87-100
Author(s):  
D. Prasad ◽  
J.G. Henry ◽  
P. Elefsiniotis
Keyword(s):  
Nitrogen Removal ◽  
Air Flow ◽  
Operating Conditions ◽  
Air Flow Rate ◽  
Flow Rates ◽  
Anaerobic Filter ◽  
Ph Values ◽  
Wide Range ◽  
Ammonia Desorption ◽  
Effects Of Ph

Abstract Laboratory studies were conducted to demonstrate the effectiveness of diffused aeration for the removal of ammonia from the effluent of an anaerobic filter treating leachate. The effects of pH, temperature and air flow on the process were studied. The coefficient of desorption of ammonia, KD for the anaerobic filter effluent (TKN 75 mg/L with NH3-N 88%) was determined at pH values of 9, 10 and 11, temperatures of 10, 15, 20, 30 and 35°C, and air flow rates of 50, 120, and 190 cm3/sec/L. Results indicated that nitrogen removal from the effluent of anaerobic filters by ammonia desorption was feasible. Removals exceeding 90% were obtained with 8 hours aeration at pH of 10, a temperature of 20°C, and an air flow rate of 190 cm3/sec/L. Ammonia desorption coefficients, KD, determined at other temperatures and air flow rates can be used to predict ammonia removals under a wide range of operating conditions.

Insights into Potent Therapeutical Antileukemic Agent L-glutaminase Enzyme Under Solid-state Fermentation: A Review

2020 ◽  
Vol 21 (3) ◽  
pp. 211-220 ◽  
Author(s):  
Chandrasai Potla Durthi ◽  
Madhuri Pola ◽  
Satish Babu Rajulapati ◽  
Anand Kishore Kola
Keyword(s):  
Solid State ◽  
Solid State Fermentation ◽  
Food Industry ◽  
Energy Requirement ◽  
Production Studies ◽  
Wide Range ◽  
Hybridoma Technology ◽  
Bacteria And Fungi ◽  
The Stability ◽  
Glutaminase Activity

Aim & objective: To review the applications and production studies of reported antileukemic drug L-glutaminase under Solid-state Fermentation (SSF). Overview: An amidohydrolase that gained economic importance because of its wide range of applications in the pharmaceutical industry, as well as the food industry, is L-glutaminase. The medical applications utilized it as an anti-tumor agent as well as an antiretroviral agent. L-glutaminase is employed in the food industry as an acrylamide degradation agent, as a flavor enhancer and for the synthesis of theanine. Another application includes its use in hybridoma technology as a biosensing agent. Because of its diverse applications, scientists are now focusing on enhancing the production and optimization of L-glutaminase from various sources by both Solid-state Fermentation (SSF) and submerged fermentation studies. Of both types of fermentation processes, SSF has gained importance because of its minimal cost and energy requirement. L-glutaminase can be produced by SSF from both bacteria and fungi. Single-factor studies, as well as multi-level optimization studies, were employed to enhance L-glutaminase production. It was concluded that L-glutaminase activity achieved by SSF was 1690 U/g using wheat bran and Bengal gram husk by applying feed-forward artificial neural network and genetic algorithm. The highest L-glutaminase activity achieved under SSF was 3300 U/gds from Bacillus sp., by mixture design. Purification and kinetics studies were also reported to find the molecular weight as well as the stability of L-glutaminase. Conclusion: The current review is focused on the production of L-glutaminase by SSF from both bacteria and fungi. It was concluded from reported literature that optimization studies enhanced L-glutaminase production. Researchers have also confirmed antileukemic and anti-tumor properties of the purified L-glutaminase on various cell lines.

scholarly journals Stormwater Runoff Treatment Using Pervious Concrete Modified with Various Nanomaterials: A Comprehensive Review

2021 ◽  
Vol 13 (15) ◽  
pp. 8552
Author(s):  
Vahid Alimohammadi ◽  
Mehdi Maghfouri ◽  
Delaram Nourmohammadi ◽  
Pejman Azarsa ◽  
Rishi Gupta ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Compressive Strength ◽  
Adsorption Capacity ◽  
Removal Rate ◽  
Stormwater Runoff ◽  
Infiltration Rate ◽  
Stormwater Treatment ◽  
Adsorption Mechanisms ◽  
Wide Range ◽  
Adsorption Processes

Clean water is a vital need for all living creatures during their lifespan. However, contaminated stormwater is a major issue around the globe. A wide range of contaminants, including heavy metals, organic and inorganic impurities, has been discovered in stormwater. Some commonly utilized methods, such as biological, physical and chemical procedures, have been considered to overcome these issues. However, these current approaches result in moderate to low contaminant removal efficiencies for certain classes of contaminants. Of late, filtration and adsorption processes have become more featured in permeable concretes (PCs) for the treatment of stormwater. As nanoparticles have vast potential and unique characterizations, such as a higher surface area to cure polluted stormwater, employing them to improve permeable concretes’ capabilities in stormwater treatment systems is an effective way to increase filtration and adsorption mechanisms. The present study reviews the removal rate of different stormwater contaminants such as heavy metals, organic and other pollutants using nanoparticle-improved PC. The application of different kinds of nanomaterials in PC as porous media to investigate their influences on the properties of PC, including the permeability rate, compressive strength, adsorption capacity and mix design of such concrete, was also studied. The findings of this review show that different types of nanomaterials improve the removal efficiency, compressive strength and adsorption capacity and decrease the infiltration rate of PC during the stormwater treatment process. With regard to the lack of comprehensive investigation concerning the use of nanomaterials in PC to treat polluted stormwater runoff, this study reviews 242 published articles on the removal rate of different stormwater contaminants by using PC improved with nanoparticles.

scholarly journals Sensing of Nickel(II) Ions by Immobilizing Ligands and Using Different SPEs

2021 ◽  
Vol 6 (1) ◽  
pp. 2
Author(s):  
Liliana Anchidin-Norocel ◽  
Sonia Amariei ◽  
Gheorghe Gutt
Keyword(s):  
Bismuth Oxide ◽  
Human Population ◽  
Raw Materials ◽  
Sensor Technology ◽  
Cyclic Voltammogram ◽  
Accurate Analysis ◽  
Nickel Allergy ◽  
Nickel Ions ◽  
Practical Applications ◽  
Wide Range

The aim of this paper is the development of a sensor for the quantification of nickel ions in food raw materials and foods. It is believed that about 15% of the human population suffers from nickel allergy. In addition to digestive manifestations, food intolerance to nickel may also have systemic manifestations, such as diffuse dermatitis, diffuse itching, fever, rhinitis, headache, altered general condition. Therefore, it is necessary to control this content of nickel ions for the health of the human population by developing a new method that offers the advantages of a fast, not expensive, in situ, and accurate analysis. For this purpose, bismuth oxide-screen-printed electrodes (SPEs) and graphene-modified SPEs were used with a very small amount of dimethylglyoxime and amino acid L-histidine that were deposited. A potentiostat that displays the response in the form of a cyclic voltammogram was used to study the electrochemical properties of nickel standard solution with different concentrations. The results were compared and the most sensitive sensor proved to be bismuth oxide-SPEs with dimethylglyoxime (Bi2O3/C-dmgH2) with a linear response over a wide range (0.1–10 ppm) of nickel concentrations. Furthermore, the sensor shows excellent selectivity in the presence of common interfering species. The Bi2O3/C-dmgH2 sensor showed good viability for nickel analysis in food samples (cocoa, spinach, cabbage, and red wine) and demonstrated significant advancement in sensor technology for practical applications.

scholarly journals Hybrid Acrylated Chitosan and Thiolated Pectin Cross-Linked Hydrogels with Tunable Properties

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 266
Author(s):  
Shaked Eliyahu ◽  
Alexandra Galitsky ◽  
Esther Ritov ◽  
Havazelet Bianco-Peled
Keyword(s):  
Electrostatic Interactions ◽  
Profile Analysis ◽  
Hybrid Hydrogel ◽  
Texture Profile ◽  
Ph Values ◽  
X Ray Scattering ◽  
Wide Range ◽  
Michael Type Addition ◽  
Physical And Chemical ◽  
Hydrogel System

We developed and characterized a new hydrogel system based on the physical and chemical interactions of pectin partially modified with thiol groups and chitosan modified with acrylate end groups. Gelation occurred at high pectin thiol ratios, indicating that a low acrylated chitosan concentration in the hydrogel had a profound effect on the cross-linking. Turbidity, Fourier transform infrared spectroscopy, and free thiol determination analyses were performed to determine the relationships of the different bonds inside the gel. At low pH values below the pKa of chitosan, more electrostatic interactions were formed between opposite charges, but at high pH values, the Michael-type addition reaction between acrylate and thiol took place, creating harder hydrogels. Swelling experiments and Young’s modulus measurements were performed to study the structure and properties of the resultant hydrogels. The nanostructure was examined using small-angle X-ray scattering. The texture profile analysis showed a unique property of hydrogel adhesiveness. By implementing changes in the preparation procedure, we controlled the hydrogel properties. This hybrid hydrogel system can be a good candidate for a wide range of biomedical applications, such as a mucosal biomimetic surface for mucoadhesive testing.

The Influence of Bi2O3 on SiO2-Al2O3-B2O3-RO Glass Propertiesarts

2014 ◽  
Vol 887-888 ◽  
pp. 86-89
Author(s):  
Ying Liang Tian ◽  
Jing Zhang ◽  
Shi Bing Sun ◽  
Ji Ye Fan
Keyword(s):  
Electrical Resistivity ◽  
High Temperature ◽  
Expansion Coefficient ◽  
Bismuth Oxide ◽  
Sintering Temperature ◽  
Oxide Content ◽  
Basic Composition ◽  
Wide Range ◽  
Melt Annealing ◽  
Annealing Method

In the paper, regarded SiO2-Al2O3-B2O3-RO system as basic composition, high-temperature glass glaze was prepared successfully by using Bi2O3 in place of Al2O3, and traditional melt annealing method was adopted .The influence of Bi2O3 on expansion coefficient, sintering temperature, electrical resistivity was investigated by DIL-2008, SJY sintering imager, Keythley2410. The results show that the sintering temperature of glass glaze has a wide range, which can reach 270°C, so it is easy to sinter; with the increasing of bismuth oxide content, expansion coefficient of glass glaze gradually increases, whereas sintering temperature and electrical resistivity continuously decreases.

scholarly journals In Vitro Incorporation of Helicobacter pylori into Candida albicans Caused by Acidic pH Stress

Pathogens ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 489 ◽  
Author(s):  
Kimberly Sánchez-Alonzo ◽  
Cristian Parra-Sepúlveda ◽  
Samuel Vega ◽  
Humberto Bernasconi ◽  
Víctor L. Campos ◽  
...  
Keyword(s):  
Helicobacter Pylori ◽  
Candida Albicans ◽  
Pcr Amplification ◽  
Growth Curves ◽  
Acidic Ph ◽  
Ph Values ◽  
16S Gene ◽  
Wide Range ◽  
H Pylori

Yeasts can adapt to a wide range of pH fluctuations (2 to 10), while Helicobacter pylori, a facultative intracellular bacterium, can adapt to a range from pH 6 to 8. This work analyzed if H. pylori J99 can protect itself from acidic pH by entering into Candida albicans ATCC 90028. Growth curves were determined for H. pylori and C. albicans at pH 3, 4, and 7. Both microorganisms were co-incubated at the same pH values, and the presence of intra-yeast bacteria was evaluated. Intra-yeast bacteria-like bodies were detected using wet mounting, and intra-yeast binding of anti-H. pylori antibodies was detected using immunofluorescence. The presence of the H. pylori rDNA 16S gene in total DNA from yeasts was demonstrated after PCR amplification. H. pylori showed larger death percentages at pH 3 and 4 than at pH 7. On the contrary, the viability of the yeast was not affected by any of the pHs evaluated. H. pylori entered into C. albicans at all the pH values assayed but to a greater extent at unfavorable pH values (pH 3 or 4, p = 0.014 and p = 0.001, respectively). In conclusion, it is possible to suggest that H. pylori can shelter itself within C. albicans under unfavorable pH conditions.

scholarly journals The development of aryl-substituted 2-phenylimidazo[1,2-a]pyridines (PIP) with various colors of excited-state intramolecular proton transfer (ESIPT) luminescence in the solid state

2016 ◽  
Vol 4 (16) ◽  
pp. 3599-3606 ◽  
Author(s):  
Toshiki Mutai ◽  
Tatsuya Ohkawa ◽  
Hideaki Shono ◽  
Koji Araki
Keyword(s):  
Excited State ◽  
Solid State ◽  
Proton Transfer ◽  
Intramolecular Proton Transfer ◽  
Aryl Group ◽  
Red Emission ◽  
Wide Range

The color of ESIPT luminescence of HPIP is tuned in a wide range by the introduction of aryl group(s), and thus a series of PIPs showing blue to red emission is realized.

scholarly journals Synthesis of Novel Crosslinked Chitosans with a Higher Fatty Diacid Diglycidyl and Their Adsorption Abilities towards Acid Dyes

2003 ◽  
Vol 21 (5) ◽  
pp. 439-449 ◽  
Author(s):  
Yoshiaki Shimizu ◽  
Atsushi Taga ◽  
Hitoshi Yamaoka
Keyword(s):  
Chemical Structure ◽  
Crosslinking Agent ◽  
Considerable Extent ◽  
Degree Of Substitution ◽  
Acid Orange 7 ◽  
Acid Dyes ◽  
Ph Values ◽  
Crosslinked Chitosan ◽  
Adsorbent Materials ◽  
Dye Molecule

Novel chitosan-based adsorbent materials with a higher fatty diacid diglycidyl as the crosslinking agent were synthesized and the adsorption abilities of the resulting polymers evaluated towards typical acid dyes. The successful formation of a crosslinked structure was confirmed via infrared spectroscopic measurements and the solubility of the polymer towards 10% aqueous solutions of acetic and formic acids determined. At higher dye concentrations, the adsorption abilities of the crosslinked chitosan towards hydrophilic CI Acid Orange 7 and CI Acid Red 1 increased with decreasing degree of substitution. However, at lower dye concentrations, the crosslinked chitosan with the lowest degree of substitution exhibited the lowest adsorption capability. With such hydrophilic acid dyes, the extent of adsorption decreased significantly as the pH of the solution increased. On the other hand, CI Acid Red 138, which contains a dodecyl group in the chemical structure, was adsorbed to a considerable extent even at higher pH values, suggesting hydrophobic interaction between the alkyl group in the dye molecule and the hydrophobic crosslinker.

Sign in / Sign up

Export Citation Format

Share Document