scholarly journals The standard samples of explosives: production, certification, application

2019 ◽  
Vol 59 (8) ◽  
pp. 60-68
Author(s):  
Alina R. Krivosheeva ◽  
◽  
Anna V. Ananeva ◽  
Elvira N. Tarazova ◽  
Tatiana A. Eneykina ◽  
...  
Keyword(s):  
Relative Error ◽  
Standard Sample ◽  
Metrological Characteristics ◽  
Expanded Uncertainty ◽  
Standard Samples ◽  
The One ◽  
First Time ◽  
Certified Values

The standard samples (SSs) of the compositions of hexogen (SS of Hxg), octogen (SS of Oct), ETN (SS of ETN) solutions in acetonitrile have been developed and certified for the first time. When approving each of aforesaid types of SSs, the interval of the permissible certified values has been determined as a range from 4.95 mg/dm3 to 5.05 mg/dm3 with an expanded uncertainty (k = 2) and the bounds of a relative error (P = 0.95) of no more than 1.8 %. The standard sample of the composition of a trinitrotoluene solution in acetonitrile (SS of 2,4,6-TNT) with the improved metrological characteristics in comparison with the analogue (SSS 9116-2008) has been developed and certified. The interval of the permissible certified values of SS of 2,4,6-TNT was from 4.95 mg/dm3 to 5.05 mg/dm3, the expanded uncertainty (k = 2) with the bounds of the relative error (P = 0.95) was 1.5%, which was 5 % less than the analogue. The improving of the metrological characteristics of the developed SSs has been obtained by the preliminary physical cleaning of the standard explosives from the impurities, which were taken for work. The two-fold recrystallization from acetone was used for cleaning of hexogen and ETN, the one-fold recrystallization from methanol was used for trinitrotoluene, the one-fold recrystallization of explosives from acetone in the complex with dimethylformamide (DMF) was used for octogen.

DEVELOPMENT OF STANDARD SAMPLES OF MAGNESIUM ALLOYS VML20 AND VMD16

2021 ◽  
pp. 39-47
Author(s):  
F.N. Karachevtsev ◽  
◽  
S.G. Eroshkin ◽  
I.V. Mostayev ◽  
M.V. Akinina ◽  
...  
Keyword(s):  
Reference Material ◽  
Magnesium Alloys ◽  
Relative Error ◽  
Reference Materials ◽  
Mass Fraction ◽  
High Strength ◽  
Metrological Examination ◽  
Standard Samples ◽  
Type Approval ◽  
Certified Values

A technology for the manufacture and production of reference material (CRM) of the composition of magnesium alloys of the VML20 and VMD16 grades has been developed. In FSUE «VNIIOFI» tests of CRM material were carried out in order to approve their type, as well as metrological examination. Conclusions were drawn up on checking the results of CRM testing for the composition of the indicated alloys and certificates of type approval of reference materials were issued. CRM sets of the approved type of state standard samples of high-strength magnesium alloys of VML20 and VMD16 grades have a relative error of the certified values of the mass fraction of elements in the range from 0.5 to 5% (by weight) no more than 5% rel.

Application of pyrometer and standard sample to determine surface temperature of studied materials

2019 ◽  
pp. 9-13
Author(s):  
V.Ya. Mendeleyev ◽  
V.A. Petrov ◽  
A.V. Yashin ◽  
A.I. Vangonen ◽  
O.K. Taganov
Keyword(s):  
Composite Material ◽  
Surface Temperature ◽  
Relative Error ◽  
Wavelength Range ◽  
Standard Sample ◽  
A Priori ◽  
Temperature Changes ◽  
Surface Temperatures ◽  
Relative Errors ◽  
Normal Emissivity

Determining the surface temperature of materials with unknown emissivity is studied. A method for determining the surface temperature using a standard sample of average spectral normal emissivity in the wavelength range of 1,65–1,80 μm and an industrially produced Metis M322 pyrometer operating in the same wavelength range. The surface temperature of studied samples of the composite material and platinum was determined experimentally from the temperature of a standard sample located on the studied surfaces. The relative error in determining the surface temperature of the studied materials, introduced by the proposed method, was calculated taking into account the temperatures of the platinum and the composite material, determined from the temperature of the standard sample located on the studied surfaces, and from the temperature of the studied surfaces in the absence of the standard sample. The relative errors thus obtained did not exceed 1,7 % for the composite material and 0,5% for the platinum at surface temperatures of about 973 K. It was also found that: the inaccuracy of a priori data on the emissivity of the standard sample in the range (–0,01; 0,01) relative to the average emissivity increases the relative error in determining the temperature of the composite material by 0,68 %, and the installation of a standard sample on the studied materials leads to temperature changes on the periphery of the surface not exceeding 0,47 % for composite material and 0,05 % for platinum.

scholarly journals Atlas of ticks (Acari: Argasidae, Ixodidae) in Germany

2021 ◽  
Author(s):  
Franz Rubel ◽  
Katharina Brugger ◽  
Lidia Chitimia-Dobler ◽  
Hans Dautel ◽  
Elisabeth Meyer-Kayser ◽  
...  
Keyword(s):  
Tick Species ◽  
Migratory Birds ◽  
Dermacentor Reticulatus ◽  
Ixodid Ticks ◽  
Federal States ◽  
Ixodes Frontalis ◽  
Argas Reflexus ◽  
The One ◽  
Argasid Tick ◽  
First Time

AbstractAn updated and increased compilation of georeferenced tick locations in Germany is presented here. This data collection extends the dataset published some years ago by another 1448 new tick locations, 900 locations of which were digitized from literature and 548 locations are published here for the first time. This means that a total of 3492 georeferenced tick locations is now available for Germany. The tick fauna of Germany includes two species of Argasidae in the genera Argas and Carios and 19 species of Ixodidae in the genera Dermacentor, Haemaphysalis, and Ixodes, altogether 21 tick species. In addition, three species of Ixodidae in the genera Hyalomma (each spring imported by migratory birds) and Rhipicephalus (occasionally imported by dogs returning from abroad with their owners) are included in the tick atlas. Of these, the georeferenced locations of 23 tick species are depicted in maps. The occurrence of the one remaining tick species, the recently described Ixodes inopinatus, is given at the level of the federal states. The most common and widespread tick species is Ixodes ricinus, with records in all 16 federal states. With the exception of Hamburg, Dermacentor reticulatus was also found in all federal states. The occurrence of the ixodid ticks Ixodes canisuga, Ixodes frontalis, Ixodes hexagonus and I. inopinatus were documented in at least 11 federal states each. The two mentioned argasid tick species were also documented in numerous federal states, the pigeon tick Argas reflexus in 11 and the bat tick Carios vespertilionis in seven federal states. The atlas of ticks in Germany and the underlying digital dataset in the supplement can be used to improve global tick maps or to study the effects of climate change and habitat alteration on the distribution of tick species.

Intuitionistic fuzzy two-factor variance analysis of movie ticket sales

2021 ◽  
pp. 1-11
Author(s):  
Velichka Traneva ◽  
Stoyan Tranev
Keyword(s):  
Comparative Analysis ◽  
Real Data ◽  
Intuitionistic Fuzzy Sets ◽  
Real Numbers ◽  
Data Set ◽  
Important Method ◽  
Ticket Sales ◽  
Intuitionistic Fuzzy ◽  
The One ◽  
First Time

Analysis of variance (ANOVA) is an important method in data analysis, which was developed by Fisher. There are situations when there is impreciseness in data In order to analyze such data, the aim of this paper is to introduce for the first time an intuitionistic fuzzy two-factor ANOVA (2-D IFANOVA) without replication as an extension of the classical ANOVA and the one-way IFANOVA for a case where the data are intuitionistic fuzzy rather than real numbers. The proposed approach employs the apparatus of intuitionistic fuzzy sets (IFSs) and index matrices (IMs). The paper also analyzes a unique set of data on daily ticket sales for a year in a multiplex of Cinema City Bulgaria, part of Cineworld PLC Group, applying the two-factor ANOVA and the proposed 2-D IFANOVA to study the influence of “ season ” and “ ticket price ” factors. A comparative analysis of the results, obtained after the application of ANOVA and 2-D IFANOVA over the real data set, is also presented.

scholarly journals Experiential ownership and body ownership are different phenomena

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Caleb Liang ◽  
Wen-Hsiang Lin ◽  
Tai-Yuan Chang ◽  
Chi-Hong Chen ◽  
Chen-Wei Wu ◽  
...  
Keyword(s):  
Conscious Experience ◽  
Distinct Type ◽  
Body Part ◽  
The Body ◽  
Body Ownership ◽  
Rubber Hand ◽  
Person Perspective ◽  
The One ◽  
First Time ◽  
Full Body

AbstractBody ownership concerns what it is like to feel a body part or a full body as mine, and has become a prominent area of study. We propose that there is a closely related type of bodily self-consciousness largely neglected by researchers—experiential ownership. It refers to the sense that I am the one who is having a conscious experience. Are body ownership and experiential ownership actually the same phenomenon or are they genuinely different? In our experiments, the participant watched a rubber hand or someone else’s body from the first-person perspective and was touched either synchronously or asynchronously. The main findings: (1) The sense of body ownership was hindered in the asynchronous conditions of both the body-part and the full-body experiments. However, a strong sense of experiential ownership was observed in those conditions. (2) We found the opposite when the participants’ responses were measured after tactile stimulations had ceased for 5 s. In the synchronous conditions of another set of body-part and full-body experiments, only experiential ownership was blocked but not body ownership. These results demonstrate for the first time the double dissociation between body ownership and experiential ownership. Experiential ownership is indeed a distinct type of bodily self-consciousness.

Address of the President Lord Blackett, O. M., C. H. at the Anniversary Meeting, 1 December 1969

1970 ◽  
Vol 174 (1037) ◽  
pp. 403-417
Keyword(s):  
Immunological Response ◽  
Immunological Tolerance ◽  
Cell Mediated Immunity ◽  
Specific Cell ◽  
Subsequent Work ◽  
The One ◽  
First Time ◽  
Improved Methods ◽  
Specific Tolerance ◽  
Immunological Barrier

The Copley Medal is awarded to Sir Peter Medawar, C. B. E., F. R. S. Medawar’s first major contribution was to prove conclusively that skin grafts made between different individuals usually fail because of an immunological response made by the recipient against foreign antigens in the donor’s cells, and then to show that the most important mechanism was a specific cell-mediated immunity due to lymphocytes. In attempting to find means of preventing the response against grafted tissues, without impairing immunological capacity in other respects, Medawar made a second major contribution by showing for the first time that it was possible to induce specific tolerance of foreign antigens by administering them to very young animals. His subsequent work, directed towards achieving practical means of overcoming the immunological barrier to tissue transplantation, led him on the one hand to investigate improved methods of inducing specific immunological tolerance and, on the other, to use antiserum against lymphocytes to suppress the damaging effects of these cells. His successful results in experimental animals have indicated the way to their possible application in Man. Medawar’s work has throughout been distinguished by a penetrating clarity of thought combined with insight, and by elegant and original experimental design. He also has a justly high reputation for his analyses and predictions in wider fields of biology, and his study of scientific method.

CsOH and its Lighter Homologues – a Comparison

2014 ◽  
Vol 69 (11-12) ◽  
pp. 1229-1236
Author(s):  
Matthias Wörsching ◽  
Constantin Hoch
Keyword(s):  
Gas Phase ◽  
Room Temperature ◽  
Structure Type ◽  
Alkali Metal Hydroxide ◽  
X Ray ◽  
Raman Spectroscopic ◽  
Cesium Hydroxide ◽  
Free Ion ◽  
The One ◽  
First Time

Abstract Cesium hydroxide, CsOH, was for the first time characterised on the basis of single-crystal data. The structure is isotypic to the one of the room-temperature modification of NaOH and can be derived from the NaCl structure type thus allowing the comparison of all alkali metal hydroxide structures. Raman spectroscopic investigations show the hydroxide anion to behave almost as a free ion as in the gas phase. The X-ray investigations indicate possible H atom positions.

scholarly journals Gamma Astrometric Measurement Experiment: testing General Relativity with a small mission

2007 ◽  
Vol 3 (S248) ◽  
pp. 290-291 ◽  
Author(s):  
A. Vecchiato ◽  
M. G. Lattanzi ◽  
M. Gai ◽  
R. Morbidelli
Keyword(s):  
General Relativity ◽  
Solar Eclipse ◽  
Galactic Center ◽  
The Sun ◽  
Measurement Experiment ◽  
The One ◽  
First Time ◽  
Bending Of Light

AbstractGAME (Gamma Astrometric Measurement Experiment) is a concept for an experiment whose goal is to measure from space the γ parameter of the Parameterized Post-Newtonian formalism, by means of a satellite orbiting at 1 AU from the Sun and looking as close as possible to its limb. This technique resembles the one used during the solar eclipse of 1919, when Dyson, Eddington and collaborators measured for the first time the gravitational bending of light. Simple estimations suggest that, possibly within the budget of a small mission, one could reach the 10−6level of accuracy with ~106observations of relatively bright stars at about 2° apart from the Sun. Further simulations show that this result could be reached with only 20 days of measurements on stars ofV≤ 17 uniformly distributed. A quick look at real star densities suggests that this result could be greatly improved by observing particularly crowded regions near the galactic center.

ANALYSIS OF THE ERROR IN DETERMINING THE EQUIVALENT SIZE OF A DEFECT BY THE STANDARDLESS METHOD DURING ULTRASONIC TESTING

2021 ◽  
pp. 50-57
Author(s):  
A. N. Kireev ◽  
M. A. Kireeva
Keyword(s):  
Relative Error ◽  
High Reliability ◽  
Ultrasonic Method ◽  
Experimental Studies ◽  
Standard Samples ◽  
Defect Identification ◽  
Identification Method ◽  
Maximum Value ◽  
Software Product ◽  
The Relationship

The article provides a review and analysis of the defect identification method for determining the size of discontinuities when diagnosing various machine parts and units by the manual ultrasonic method. This method makes it possible to determine the equivalent size of discontinuities of various types without using standard samples of an enterprise: point planar and volumetric; extended planar and volumetric. The method is based on the use of the relationship between the amplitude and time characteristics of the echo signal from the discontinuity and the backside signal in the object being diagnosed and the equivalent size of the discontinuity. The article presents the mathematical apparatus for the implementation of this method. Also presented is a software product that allows you to automate calculations when using this defect identification method. The article contains experimental studies of the method for determining the equivalent dimensions of discontinuities of various types, which have shown its high reliability. The maximum value of the relative error in determining the equivalent size of a point planar discontinuity was 2.867 %. The maximum value of the relative error in determining the equivalent size of a point volumetric discontinuity was 1.986 %. The maximum value of the relative error in determining the transverse equivalent size of an extended planar discontinuity was 0.667 %. The maximum value of the relative error in determining the transverse equivalent size of an extended volumetric discontinuity was 1.95 %.

“Satisfied with the Ruins of Berlin”: The German Capital’s Image in Soviet Graphics of 1945

2021 ◽  
Vol 17 (6) ◽  
pp. 564-575
Author(s):  
Irina I. Rutsinskaya
Keyword(s):  
Visual Art ◽  
Visual Image ◽  
Point Of View ◽  
The Public ◽  
Historical Justice ◽  
Public Consciousness ◽  
Post War ◽  
The One ◽  
First Time ◽  
The City

An artist who finds themselves in the last days of a war in the enemy’s defeated capital may not just fix its objects dispassionately. Many factors influence the selection and depicturing manner of the objects. One of the factors is satisfaction from the accomplished retribution, awareness of the historical justice triumph. Researchers think such reactions are inevitable. The article offers to consider from this point of view the drawings created by Soviet artists in Berlin in the spring and summer of 1945. Such an analysis of the German capital’s visual image is conducted for the first time. It shows that the above reactions were not the only ones. The graphics of the first post-war days no less clearly and consistently express other feelings and intentions of their authors: the desire to accurately document and fix the image of the city and some of its structures in history, the happiness from the silence of peace, and the simple interest in the monuments of European art.The article examines Berlin scenes as evidences of the transition from front-line graphics focused on the visual recording of the war traces to peacetime graphics; from documentary — to artistry; from the worldview of a person at war — to the one of a person who lived to victory. In this approach, it has been important to consider the graphic images of Berlin in unity with the diary and memoir texts belonging to both artists and ordinary soldiers who participated in the storming of Berlin. The combination of verbal and visual sources helps to present the German capital’s image that existed in the public consciousness, as well as the specificity of its representation by means of visual art.

Sign in / Sign up

Export Citation Format

Share Document