Phosphorus interactions with Martian soil simulants

Author(s):  
Sofia Manimanaki ◽  
Dimitris Mitrogiannis ◽  
Ioannis Baziotis ◽  
Maria Psychoyou ◽  
Ioannis Papanikolaou ◽  
...  

<p>Phosphorus (P) is an essential nutrient for plant growth. According to the vision of circular bioeconomy, the management of nutrient-rich wastewaters should include both treatment and utilization goals (Battista & Bolzonella, 2019). Consequently, the application of in-situ resources utilization (ISRU), using typical Martian soil (e.g., Yen et al., 2005), is vital for the sustainability of future long-term settlements on Mars.</p><p>Martian soil simulants, provided by The CLASS Exolith Lab from the University of Central Florida, were tested for their phosphorus sorption capacity. Sorption of phosphate anions (PO<sub>4</sub>-P) from aqueous solutions (AS) of KH<sub>2</sub>PO<sub>4</sub> and sodium bicarbonate, as well as from hydrolyzed human urine (HU) was examined at a preliminary stage, using three Martian soil simulants (MGS-1; Rocknest soil, MGS-1S; M-WIP Reference Case B and MGS-1C; M-WIP Reference Case C; Cannon et al. 2019). In particular, isothermal, kinetic, pH, temperature, initial sorbent concentration (5 g soil simulant/L AS or HU, 10 g/L and 15 g/L) and desorption experiments were carried out, the duration of which ranged from five days to three weeks.</p><p>The percentage of phosphorus removal was up to 60 % for the aqueous solutions and 24 % for the hydrolyzed human waste. The sulfate-rich simulant (MGS-1S) exhibited the best results. The major phases of MGS-1S are: gypsum, plagioclase, basaltic glass, pyroxene, and olivine. Temperature and the initial pH seem to be the dominant factors affecting P sorption. Equilibrium between sorbent and AS was achieved between five and seven days, as indicated by kinetic experiments. Isothermal experiments at 25 ⁰C with AS of different P concentrations displayed a linear correlation between adsorption capacity (q) and P-concentration (r<sup>2</sup>=0.98). Maximum q was observed at 8.5 and 27 mg/g for AS and HU experiments respectively, when 5 g/L of initial sorbent concentration was used. X-ray diffraction (XRD) of the sorbents treated with AS showed the presence of the newly formed phases berlinite and brushite. Perhaps due to hydrolysis of the pre-existing illite, aluminum bound with the solution’s phosphates, forming berlinite and buffering AS’s pH to lower values. Formation of brushite is possibly indicative of gypsum (predominant phase in the raw material) dissolution subsequently releasing sulfate anions. In a similar approach, XRD evaluation of the sorbents treated with HU revealed the newly formed phases calcite and hannayite. Phosphate and ammonia ions were likely to bind to the sample and were precipitated within newly formed calcium-bearing phases.</p><p>These experiments form a preliminary study of Martian soil simulants, and initial results indicate a possible use of Martian soils as waste recipients or as fertilizers in future missions.</p><p><strong>References</strong></p><p>Battista, F., & Bolzonella, D. (2019). Waste and Biomass Valorization, 10(12), 3701-3709.<br>Cannon, K. M., Britt, D. T., Smith, T. M., Fritsche, R. F., & Batcheldor, D. (2019). Icarus, 317, 470-478.<br>Yen, A. S., Gellert, R., Schröder, C., Morris, R. V., Bell, J. F., Knudson, A. T., ... & Blaney, D. (2005). Nature, 436(7047), 49-54.</p>

2014 ◽  
Vol 71 (3) ◽  
pp. 397-404 ◽  
Author(s):  
Tong Li ◽  
Tingting Li ◽  
Houfeng Xiong ◽  
Donglei Zou

The discharge of hydroquinone (HQ), an important chemical raw material, to natural waters poses different ecological threats to aquatic organisms. In this study, we investigated the removal performance of traditional and modified microelectrolysis methods in aqueous solutions. The traditional microelectrolysis packing was modified by adding manganese (Mn), zinc (Zn), and copper (Cu) powder as additives. The factors affecting the removal performance of HQ, such as catalytic metal type, mass fraction of additive, reaction time, and initial pH, were examined. The results showed that the Mn modified packing exhibited the best performance compared to Zn and Cu powder. The removal rate of HQ using Mn modified packing can reach 94% after 4 h. In addition, 9% of Mn packing has a higher removal rate than other mass fractions. The acidic solution pH shows a more favorable degradation than a neutral and alkaline solution. The intermediates of HQ degradation by modified microelectrolysis were identified and then the pathway of HQ degradation was proposed. Our result indicates that Mn as catalytic metal holds promising potential to enhance HQ removal in water using the microelectrolysis method.


2018 ◽  
Vol 69 (9) ◽  
pp. 2323-2330 ◽  
Author(s):  
Daniela C. Culita ◽  
Claudia Maria Simonescu ◽  
Rodica Elena Patescu ◽  
Nicolae Stanica

A series of three chitosan-based magnetic composites was prepared through a simple coprecipitation method. It was investigated the influence of mass ratio between chitosan and magnetite on the physical and chemical properties of the composites in order to establish the optimum conditions for obtaining a composite with good adsorption capacity for Pb(II) and Cu(II) from mono and bicomponent aqueous solutions. It was found that the microspheres prepared using mass ratio chitosan / magnetite 1.25/1, having a saturation magnetization of 15 emu g--1, are the best to be used as adsorbent for the metal ions. The influence of different parameters such as initial pH values, contact time, initial concentration of metal ions, on the adsorption of Pb(II) and Cu(II) onto the chitosan-based magnetic adsorbent was investigated in details. The adsorption process fits the pseudo-second-order kinetic model in both mono and bicomponent systems, and the maximum adsorption capacities calculated on the basis of the Langmuir model were 79.4 mg g--1 for Pb(II) and 48.5 mg g--1 for Cu(II) in monocomponent systems, while in bicomponent systems were 88.3 and 49.5 mg g--1, respectively. The results revealed that the as prepared chitosan-based magnetic adsorbent can be an effective and promising adsorbent for Pb(II) and Cu(II) from mono and bicomponent aqueous solutions.


2021 ◽  
Author(s):  
Liang Wang ◽  
Peng Gao ◽  
Mengxin Liu ◽  
Ziqing Huang ◽  
Shixia Lan ◽  
...  

Monodisperse polypyrrole/SBA-15 composite (PPy/SBA-15) was fabricated by in-situ polymerization and used for Cr(Ⅵ) adsorption from aqueous solution. PPy/SBA-15 was characterized by numerous approaches. Factors affecting the Cr(Ⅵ) adsorption process included...


1955 ◽  
Vol 1 (5) ◽  
pp. 299-311 ◽  
Author(s):  
R. Steel ◽  
C. P. Lentz ◽  
S. M. Martin

Factors affecting the production of citric acid in the submerged fermentation of ferrocyanide-treated beet molasses by Aspergillus niger were studied in 2.5 and 36 liter fermenters. The small fermenters were used to determine the effects of changes in sterilization technique, phosphate supplement, ferrocyanide treatment, inoculum level, initial pH, fermentation temperature, and aeration rate. The relation between ferrocyanide concentration and inoculum level was also studied. Four different samples of molasses were fermented successfully. An average yield of 8.2% citric acid (64% conversion) was obtained from 51 small-scale fermentations. Comparable yields were obtained in the large fermenters under comparable conditions. Most of the information obtained with the small fermenters was applicable to the larger-scale fermenters, but in the latter the fermentation was significantly more stable. Aeration was the main problem in the scale-up and aeration rates approximately double those calculated on a fermenter cross-sectional area basis were required for comparable results in the large fermenters.


Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1437
Author(s):  
Chih Ming Ma ◽  
Bo-Yuan Yang ◽  
Gui-Bing Hong

Hydrogel beads based on the husk of agarwood fruit (HAF)/sodium alginate (SA), and based on the HAF/chitosan (CS) were developed for the removal of the dyes, crystal violet (CV) and reactive blue 4 (RB4), in aqueous solutions, respectively. The effects of the initial pH (2–10) of the dye solution, the adsorbent dosage (0.5–3.5 g/L), and contact time (0–540 min) were investigated in a batch system. The dynamic adsorption behavior of CV and RB4 can be represented well by the pseudo-second-order model and pseudo-first-order model, respectively. In addition, the adsorption isotherm data can be explained by the Langmuir isotherm model. Both hydrogel beads have acceptable adsorption selectivity and reusability for the study of selective adsorption and regeneration. Based on the effectiveness, selectivity, and reusability of these hydrogel beads, they can be treated as potential adsorbents for the removal of dyes in aqueous solutions.


2002 ◽  
Vol 20 (4) ◽  
pp. 393-416 ◽  
Author(s):  
Fawzi Banat ◽  
Sameer Al-Asheh ◽  
Dheaya‘ Al-Rousan

This study examined and compared the ability of chicken feathers, human hair and animal horns, as keratin-composed biosorbents, for the removal of Zn2+ and Cu2+ ions from single metal ion aqueous solutions under different operating conditions. The three biosorbents investigated in this study were all capable of adsorbing Zn2+ and Cu2+ ions from aqueous solutions. The biosorbent showing the highest uptake of Zn2+ and Cu2+ ions was animal horns. Chicken feathers showed a higher Cu2+ ion uptake and a lower Zn2+ ion compared to human hair. Increasing the initial concentration of Zn2+ or Cu2+ ions, or increasing the initial pH value, increased the metal ion uptake. Such uptake decreased when the temperature was raised from 25°C to 50°C for all adsorbent/metal ion combinations except for Zn2+ ion/human hair where the uptake increased with temperature. It was demonstrated that the addition of NaCl salt to the metal ion solution depressed the metal ion uptake. The Freundlich isotherm model was found to be applicable to the adsorption data for Cu2+ and Zn2+ ions.


Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 843
Author(s):  
Ferawati Ferawati ◽  
Izalin Zahari ◽  
Malin Barman ◽  
Mohammed Hefni ◽  
Cecilia Ahlström ◽  
...  

Yellow pea and faba bean are potential candidates to replace soybean-based ingredients due to their suitability for cultivation in the northern hemisphere, non-genetically modified organisms cultivation practice and low risk of allergenicity. This study examined the functionality of local yellow pea and faba bean protein isolates/concentrate as meat analogue products. The most critical factors affecting the texture properties of meat analogue were also determined. Extrusion was used to produce high-moisture meat analogues (HMMAs) from yellow pea and faba bean protein isolates/concentrates and HMMAs with fibrous layered structures was successfully produced from both imported commercial and local sources. The texture properties of the HMMA produced were mainly affected by the ash, fiber and protein content and water-holding capacity of the source protein. Three extrusion process parameters (target moisture content, extrusion temperature, screw speed), also significantly affected HMMA texture. In conclusion, functional HMMA can be produced using protein isolates derived from locally grown pulses.


2019 ◽  
Vol 121 (2) ◽  
pp. 492-504 ◽  
Author(s):  
Waqar Ahmed ◽  
Arsalan Najmi ◽  
Hafiz Muhammad Faizan ◽  
Shaharyar Ahmed

PurposeThe purpose of this paper is to empirically analyze the factors affecting Muslim consumers’ willingness to pay (WTP) for Halal food, products and operations by employing theory of reasoned action.Design/methodology/approachThis study has used quantitative research methodology and collected data from 350 questionnaires from a densely populated city of Pakistan. Partial least squares-structural equation modeling was used to analyze the data.FindingsThe results show that the concerns about Halal, religiosity, perception of usefulness of Halal and product ingredients have a significant impact on WTP for Halal foods, while attitude has an insignificant impact on WTP. Moreover, the extent of demand for Halal certification is significantly affected by WTP.Originality/valueThe study highlighted the concerns of the Muslim consumers with respect to Halalness of the products and operations despite living in a Muslim country. It is recommended that the policy makers, food authorities and health institutions should conduct regular inspections of foods, products and producers’/manufacturers’ operations to ensure that all the procedures from manufacturing of the raw material till the finished goods follow Islamic principles to make them completely Halal.


2016 ◽  
Vol 73 (11) ◽  
pp. 2747-2753 ◽  
Author(s):  
Wusong Kong ◽  
Hongxia Qu ◽  
Peng Chen ◽  
Weihua Ma ◽  
Huifang Xie

In this study, Cu2O-CuO/ZSM-5 nanocomposite was synthesized by the impregnation method, and its catalytic performance for the destruction of AO7 in aqueous solutions was investigated. The morphology, structure and surface element valence state of Cu2O-CuO/ZSM-5 were characterized by transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The operating conditions on the degradation of AO7 by Cu2O-CuO/ZSM-5, such as initial pH values, concentration of AO7 and catalyst dosage were investigated and optimized. The results showed that the sample had good catalytic activity for destruction of AO7 in the absence of a sacrificial agent (e.g. H2O2): it could degrade 91% AO7 in 140 min at 25 °C and was not restricted by the initial pH of the AO7 aqueous solutions. Cu2O-CuO/ZSM-5 exhibited stable catalytic activity with little loss after three successive runs. The total organic carbon and chemical oxygen demand removal efficiencies increased rapidly to 69.36% and 67.3% after 120 min of treatment by Cu2O-CuO/ZSM-5, respectively.


REAKTOR ◽  
2017 ◽  
Vol 5 (2) ◽  
pp. 79
Author(s):  
Abdullah Abdullah ◽  
H. B. Mat

The liquid pineapple waste contain mainly sucrose, glucose, fructose, and other nutrients. It therefore can potentiall be used as carbon source for organic acid fermentation. Recently, lactic acid has been considered to be an important raw material for production of biodegradadable lactace polymer. The experiments weree carried out in shake flash fermentation using lactobacillus delbroeckii. Effect of some parameters such as temperature, initial Ph, initial substrate concentration, yeast extract concentration and fermentation time to the yield have been studied. The highest yield was 85.65% achieved at 40 0C, PH 6.00, 52.2 g/l sugar concentration with 5 g/l yeast extract. There was no significant increasing in lactic acid production was observed if supplementation of yeast extract above 10%.Keyword : lactic acid fermentation, liquid pineapple waste, lactobacillus delbrueckii


Sign in / Sign up

Export Citation Format

Share Document