scholarly journals Pengaruh Lingkungan Kerja Dan Keselamatan Kerja Terhadap Resiko Kecelakaan Kerja Di Perusahaan Perkebunan Kelapa Sawit PT. Niagamas Gemilang Kabupaten Kutai Kartanegara

2021 ◽  
Vol 21 (2) ◽  
pp. 96-113
Author(s):  
Sabran Sabran ◽  
Achmad Fathurrahman ◽  
Fahmi Fahmi
Keyword(s):  
Linear Regression ◽  
Work Environment ◽  
Oil Palm ◽  
Occupational Safety ◽  
Analytical Tool ◽  
Work Safety ◽  
Dominant Effect ◽  
Work Accident ◽  
Work Accidents ◽  
Plantation Company

  Abstract:                  The purpose of this study was to determine and analyze the influence of the Work Environment and Work Safety and to determine the most dominant variable influencing the Work Environment and Work Safety on the Risk of Accidents at the Oil Palm Plantation Company PT. Niagamas Gemilang, in Sungai Payang Village, Loa Kulu District, Kutai Kartanegara Regency. The analytical tool used is multiple linear regression with a sample of 91 people.                The results showed that the variables of the Work Environment and Work Safety had a simultaneous effect on the Risk of Accidents at Work. Work Environment and Work Safety variables have a partial effect on the Risk of Work Accidents at PT. Brilliant Niagamas. Besides that, the work safety variable has a dominant effect on the risk of work accidents at PT. Brilliant Niagamas.   Keywords: Work Accident and Occupational Safety, Risk of Work Accident

scholarly journals The Effect of Work Situation and Unsafety Action on Work Accident in PT. Raja Marga Nagan Raya District

2020 ◽  
Vol 7 (1) ◽  
pp. 34
Author(s):  
Susy Sriwahyuni ◽  
Eka Santika ◽  
Khairunnas Khairunnas ◽  
Ishalyadi Ishalyadi ◽  
Muhammad Iqbal Fahlevi
Keyword(s):  
Work Environment ◽  
Work Situation ◽  
Chi Square ◽  
Cross Sectional ◽  
Workplace Environment ◽  
Maximum Extent ◽  
Chi Square Test ◽  
Work Accident ◽  
Work Accidents

A work accident is an unplanned event that has the potential to cause injury, damage or other loss to someone. Based on preliminary studies conducted by researchers to 10 employees that the work environment is less than the maximum one of which is caused by a workplace environment that is too hot, muddy, slippery and easily causes employees to slip. The aims of research to determine the factor of affecting work accident. The research used analytic survey with cross sectional approach. The population were all employees (72 respondents) and used total sampling and used chi-square test. The results showed there were effect among work situation (Pvalue = 0.011) and unsafety action (Pvalue = 0,000) with work accident. The researcher suggest to PT. Raja Marga to provide warning letters to employees in an effort to avoid work accidents to the maximum extent.

scholarly journals Gambaran Tingkat Kepuasan Tenaga Kerja Terhadap Program K3 Dibagian AMP (Asphalt Mixing Plant) PT. Prima Pembangunan Kerinci Tahun 2017

2018 ◽  
Vol 3 (2) ◽  
pp. 25
Author(s):  
Aulia Azhar ◽  
Dina Waldani
Keyword(s):  
Personal Protective Equipment ◽  
Occupational Safety ◽  
Sampling Technique ◽  
Protective Equipment ◽  
Work Relations ◽  
Employee Safety ◽  
Safety And Health ◽  
Work Health ◽  
Work Accident ◽  
Work Accidents

K3 program aimed to provide security for employees in carrying out their work and reduce company costs. If work accidents and illness arise due to work relations, occupational safety and health (K3) must be a top priority in all companies in order to achieve satisfaction. The purpose of this study was to find out the description of the level of workforce satisfaction with the K3 program in the AMP (Asphal Mixing Plant) section of PT. Kerinci Development in 2017. The design of this study was descriptive. The population is all labor in PT. Prima Pembangunan Kerinci AMP section with 30 samples. The method of sampling with total sampling technique, the study was conducted in March - August 2017 and the research instrument using a questionnaire. Based on the results of the study as many as 13 workers (43.3%) were not satisfied with work safety and as many as 17 workers (56.7%) were not satisfied with the work health of the K3 program in the AMP (Asphal Mixing Plant) PT. Prima Pembangunan Kerinci in 2017. It is hoped that the company leaders will conduct routine health checks every month and also leaders pay more attention to employee safety by providing training on awareness of using personal protective equipment and introducing personal protective equipment and ways of using it, so that employees can use at any time in the event of a work accident.

scholarly journals USULAN PERBAIKAN SISTEM MANAJEMEN KESELAMATAN DAN KESEHATAN KERJA (SMK3) SEBAGAI UPAYA MEMINIMALISIR ANGKA KECELAKAAN KERJA MENGGUNAKAN METODE HAZOP (Studi Kasus : PT. XYZ)

2019 ◽  
Vol 3 (3) ◽  
pp. 1-10
Author(s):  
Muhammad Nur
Keyword(s):  
Oil Palm ◽  
Occupational Safety ◽  
Occupational Accidents ◽  
Crude Palm Oil ◽  
Extreme Risk ◽  
Safety And Health ◽  
Medium Risk ◽  
Hazard And Risk ◽  
Work Accidents ◽  
A Company

PT. XYZ is a company engaged in oil palm plantations and processing with its main commodity is the oil palm plantations (Elais Queineensis Jack). In 2018, thare are several occupational safety and health problems naamely occupational accidents experienced by special employees in the production processarea. The purpose of this study is to detemine the types of work accidents, the types of hazards created based on the risk materics. This study begins by identifying Hazard and risk and then looking for potential sources of occuptional hazard so that harm can be done using the Hazard and Operability Study (HAZOP) method. The research results have been carried out based on the process (Crude Palm Oil) found 8 sources of potential danger between : Loding Ramp Station, Sterilizer Station, Tippler Station, DigesterStation, Press Station, Clarification Station, Kernel Stationdan Boiler Station, then risk assessment : low risk, medium risk, high risk and extreme risk.

scholarly journals Predictive Models of Accidents at Work in the Steel Sector as a Framework for Sustainable Safety

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 129
Author(s):  
Tomasz Małysa ◽  
Bożena Gajdzik
Keyword(s):  
Occupational Safety ◽  
Safety Management ◽  
Optimal Model ◽  
Work Safety ◽  
Sustainable Business ◽  
Combined Model ◽  
Steel Sector ◽  
Work Accidents ◽  
Combined Forecasting ◽  
Combined Forecasts

Work safety can be a component of the broadly understood sustainable enterprise approach that goes beyond the idea of sustainable development. Sustainability in an unpredictable and turbulent environment has many constellations, many aspects and many fields of the enterprise’s activity and it complements the rationality of the business. The aim is to understand the sustainability of safety, because this is the term we have adopted for rationality in occupational safety management, in the context of the analysis of work accidents in the Polish steel industry, with particular emphasis on the methodology of forecast assessment in the studied area, proposed by us. The realized forecasts were used for the creation of a combined model which formed the basis for formulating conclusions from the analysis. The publication presents the modeling of the victims of work accidents in the steel sector in Poland. Based on the research of the forecasts obtained, a downward trend is recorded in the number of persons injured in accidents at work in the steel sector. In order to select the optimal model, it was proposed to set combined forecasts. In order to select the optimal model, it was proposed to set combined forecasts. The obtained values of ex-ante forecasts in the combined model also confirmed the forecasted trends determined within the adaptation models. The study is a proposal to extend the combined forecasting methods used to assess occupational safety. We consciously chose to include the methodology of combined forecasting of the number of people injured in accidents in the interpretation of sustainability, because we see the possibility of interpreting accident rates in sustainable business in the future. In the publication, we propose the framework of the sustainable safety model as an element of work safety management in an enterprise. We are trying to answer the question about the place of accident prediction in sustainable safety.

scholarly journals ANALISIS IKLIM KESELAMATAN KERJA DI PT. XYZ BALIKPAPAN 2021

2021 ◽  
Vol 5 (2) ◽  
pp. 1303-1309
Author(s):  
Deni Eri Zulfirman ◽  
ZULKIFLI DJUNAIDI
Keyword(s):  
Work Environment ◽  
Risk Taking ◽  
Occupational Safety ◽  
Safety Climate ◽  
Health And Safety ◽  
Work Safety ◽  
Average Value ◽  
True Value ◽  
Safety And Health ◽  
Safety Priority

This study was conducted to determine the safety climate, the safety climate reflects workers' perceptions of the true value of safety in an organization - as a contributing factor to the reduction of accidents due to accidents. The purpose of this study was to determine the level of health and safety scores in the company. This study uses a descriptive analytical method with a total of 100 respondents (total respondents) with a variable measuring the level of work safety using a questionnaire published by the National Research Center for the Danish work environment, namely the Nordic Climate Safety Questionnaire 50 (NOSACQ-50) which contains 50 statements and has been completed. tested and translated in 40 languages, one of which is Indonesian. This research was conducted at PT. XYZ Balikpapan which starts in January until March 2021,. The results of this study indicate that there are 3 dimensions that have an average value below 3.30, namely the management safety empowerment dimension, management safety justice dimension and worker’s safety priority and risk non-acceptance dimension. Suggested improvements include making decisions and receiving advice and input from workers regarding work safety and being fair to workers regarding occupational safety and health for management and prioritizing work safety and not taking risks even though the work is busy and reducing risk-taking behavior that is dangerous for workers.

scholarly journals Analisis Pengaruh Kecelakaan Kerja Terhadap Pemenuhan Target Produksi Dengan Regresi Linier di PD Tahu Al-Barokah

2020 ◽  
Vol 3 (2) ◽  
pp. 95
Author(s):  
Isma Masrofah ◽  
Fery Hermawan
Keyword(s):  
Linear Regression ◽  
Consumer Demand ◽  
Raw Material ◽  
Coefficient Of Determination ◽  
Correlation Relationship ◽  
Relationship Value ◽  
Work Accident ◽  
Work Accidents ◽  
High Level ◽  
A Company

Abstract— PD Tahu Al-Barokah is a company engaged in the production of tofu by utilizing soybeans as its main raw material. This company is one company that actively produces tofu every day to meet consumer demand, especially in the district of Cianjur. The problem in PD. Know Al-Barokah is the high level of work accidents in the production department. Where this study aimed to find out how much influence the level of work accidents on meeting production targets. The method used in this study is linear regression. The results of the correlation / relationship value (R) of 0.779 obtained the output obtained a coefficient of determination (R Square) of 0.607 which means that the influence of the work accident variable on the variable fulfillment target of 60.7%. Abstrak— PD Tahu Al-Barokah merupakan perusahaan yang bergerak dibidang produksi tahu dengan memanfaatkan kedelai sebagai bahan baku utamanya. Perusahaan ini merupakan salah satu perusahaan yang aktif memproduksi tahu setiap harinya untuk memenuhi permintaan konsumen khususnya di kabupatun cianjur. Permasalah yang ada di PD Tahu Al-Barokah yaitu  adanya kecelakaan kerja pada bagian produksi, yang diprediksi menjadi penyebab tidak tercapainya target pemenuhan produksi. Penelitian ini ditujukan untuk mengetahui seberapa besar pengaruh tingkat kecelakaan kerja terhadap pemenuhan target produksi. Metode yang digunakan pada penelitian ini yaitu regresi linier. Pengaruh variabel kecelakan kerja terhadap variabel pemenuhan target poduksi di PD Tahu Al-Barokah tidak signifikan,  dengan persamaan regresi linier Y = 10432,638 - 66,057X. Hasil nilai korelasi / hubungan (R) yaitu sebesar 0,224 didapat output tersebut diperoleh koefisien determinasi (R Square) sebesar 0,05 yang terdapat pengertian bahwa pengaruh variabel kecelakan kerja terhadap variabel pemenuhan target poduksi sebesar 5 %.

scholarly journals The Work Accidents and Occupational Diseases in Turkey and Its Place in the Social Security System

2013 ◽  
Author(s):  
Dilek Baybora
Keyword(s):  
Social Security ◽  
Occupational Diseases ◽  
Occupational Safety ◽  
Occupational Accidents ◽  
Work Related ◽  
Safety And Health ◽  
The Social ◽  
Work Accident ◽  
Work Accidents ◽  
Very High

The work accidents and occupational diseases are very important especially in the industrializing countries. According to the International Labour Organization (ILO) every 15 seconds, a worker dies from a work-related accident or disease. Every 15 seconds, 160 workers have a work-related accident. Every day, 6.300 people die as a result of occupational accidents or work-related diseases–more than 2,3 million deaths per year. The economic burden of poor occupational safety and health practices is estimated at 4 per cent of global Gross Domestic Product each year. In Turkey, work accidents’ figures are very high but occupational diseases’ figures are not very high. There are several causes of this condition. In Turkey, the Work Accidents, Occupational Diseases and Maternity Act No. 4772 was accepted in 1947. The Social Security and General Health Insurance Act No.5510 was accepted in 2006. There are regulations about the work accident and occupational disease insurance in the Act. According to the Act, insured and the rights holders can obtain some assistance.

scholarly journals The role of cognitive functions in the dynamics of work accidents

2022 ◽  
Vol 354 ◽  
pp. 00019
Author(s):  
Daniel George Tanasievici ◽  
Gabriela Caldarescu ◽  
Constantin Baciu ◽  
Elena Matcovschi
Keyword(s):  
Cognitive Functions ◽  
Work Performance ◽  
Occupational Safety ◽  
Causal Chain ◽  
Long Term Memory ◽  
Work System ◽  
Cognitive Ergonomics ◽  
Starting Point ◽  
Work Accident ◽  
Work Accidents

This paper brings to the fore the need to study the causality of work accidents starting from the hypothesis that the causes must be identified immediately, respectively the dysfunctions of the work system, which contribute to their occurrence. So, in the causal chain of the work accident, the last link is the “meeting” between the victim and the material agent who injures her, and often the factors of the work system, which are potential causes of injury, are specific to the worker and represent an error inappropriate behaviour in terms of occupational safety, in the form of wrongdoing or omissions. In this regard, cognitive ergonomics is still an untapped area, although it can make significant contributions to improving work performance and creating safe and healthy working environments in industry. Cognitive functions are relevant when we talk about 4 essential skills of the worker, respectively: sensation and perception, attention, short and long term memory. The paper brings more information for the scientific community because the analysis highlights the link between the cognitive functions of workers and the errors generated by them in the dynamics of a work accident, and can also be a starting point for new research.

scholarly journals PENGARUH LINGKUNGAN KERJA DAN INSENTIF TERHADAP KEPUASAN KERJA (STUDI PADA PETUGAS LABORATORIUM PUSKESMAS DI KABUPATEN LOMBOK BARAT )

2017 ◽  
Vol 6 (1) ◽  
Author(s):  
Lalu Samsu Rizali
Keyword(s):  
Linear Regression ◽  
Multiple Linear Regression ◽  
Work Environment ◽  
Health Center ◽  
Work Satisfaction ◽  
Dominant Effect ◽  
Incentive Effect ◽  
Laboratory Workers

This research is aimed at determining the effect of work environment and incentives on the work satisfaction of health center laboratory workers in West Lombok. The population of this research are all 40 workers of health center laboratory in West Lombok. The analysis is completed with multiple linear regression. The research showed that work environment and incentive simultaneously have positive and significant  effect on the work satisfaction. Partially, work environment has positive a significant  effect on work satisfaction and incentive  has positive and significant effect on work satisfaction. Work environment has more dominant  effect comparing to the incentive effect on the work satisfaction of workers of health center laboratory in West Lombok.Keywords :  Work Satisfaction, Work Environment, Incentive.

scholarly journals GAMBARAN TINGKAT PENGETAHUAN TENAGA KERJA PT’X’ TENTANG UNDANG-UNDANG DAN PERATURAN KESEHATAN DAN KESELAMATAN KERJA

2019 ◽  
Vol 6 (2) ◽  
pp. 69-81
Author(s):  
Andi Hendrawan
Keyword(s):  
Occupational Safety ◽  
Employee Performance ◽  
Sampling Technique ◽  
Company Performance ◽  
Knowledge Level ◽  
Safety Factors ◽  
Work Safety ◽  
Long Time ◽  
Level Of Knowledge ◽  
Work Accidents

Work safety has been a concern in government and business for a long time. Occupational safety factors are important because they are closely related to employee performance and in turn to company performance. The increasing availability of work safety facilities the less likely the occurrence of work accidents. Metpde used in this research is metodesurvey with approach of cross sectional.sampelyang used as many as 40 people with total sampling technique, Samples are asked to fill questionnaires distributed by researcher then collected and processed with statitik diskripttif. The results showed 10 samples have a good level of knowledge, 25 samples of sufficient knowledge level and 5 samples of knowledge level of bad.

Sign in / Sign up

Export Citation Format

Share Document