scholarly journals Influence of Intelligent Boom Control in Forwarders on Performance of Operators

2021 ◽  
Vol 43 (1) ◽  
Author(s):  
Tomáš Zemánek ◽  
Petr Fiľo
Keyword(s):  
Performance Indicators ◽  
Positive Influence ◽  
Standard System ◽  
Practical Training ◽  
Work Output ◽  
Crane Control ◽  
Machine Operation

This paper deals with the influence of an Intelligent Boom Control (IBC) in forwarders on the work of operators. The work with the IBC and standard system of crane control was measured by the use of a John Deere harvester and forwarder simulator. Two individuals without any practical training and two individuals with experience in the control of the crane took the measurements. The monitoring included eight different performance indicators. The use of the IBC system allowed the untrained operators to increase their work output by 27. With the use of the IBC system, these individuals also showed 53% fewer direct damages to the machine. However, our findings show that the length of experience influenced the performance of the operators out of all the monitored indicators. Notwithstanding that fact, the use of the IBC system has a direct positive influence on the economy of the machine operation.

scholarly journals Study on mechanisms of tillage for melon cultivation under the film

2021 ◽  
Vol 304 ◽  
pp. 03012
Author(s):  
Khayriddin Fayzullaev ◽  
Farmon Mamatov ◽  
Bakhadir Мirzaev ◽  
Dilmurod Irgashev ◽  
Sodik Mustapakulov ◽  
...  
Keyword(s):  
Technological Process ◽  
Direct Cost ◽  
Mathematical Analysis ◽  
Performance Indicators ◽  
Classical Mechanics ◽  
Basic Principles ◽  
Machine Operation ◽  
Technical Procedure ◽  
Design Diagram ◽  
Working Bodies

The aim of the study is to develop a machine for preparing the soil for sowing melons under a tunnel film. The authors have developed a machine for preparing the soil for sowing melons under a tunnel film, which is equipped with deep-diggers with an inclined stand of the “paraplau” type, a furrow maker and rotary working bodies. A design diagram and a fragment of the machine operation have beak given. The basic principles and methods of classical mechanics, mathematical analysis and statistics were used in this study. Tests have established that the developed machine reliably performs the specified technological process and its performance indicators fully meet the requirements. When using the developed machine for preparing the soil for sowing melons under the film, the direct cost of processing one hectare of area is reduced by 33.4%. The study’s goal is to create a machine that prepares soil for seeding melons under a tunnel film. The authors have created a machine that includes deep-diggers with a “paraplau” style inclined platform, a furrow maker, and rotating working bodies for preparing the soil for planting melons beneath a tunnel film. A design schematic as well as a portion of the machine functioning has been provided. In this work, the fundamental concepts and methodologies of classical mechanics, mathematical analysis, and statistics were employed. The created machine reliably executes the required technical procedure, and its performance indicators completely fulfill the criteria, according to tests. The direct cost of processing one hectare of land is lowered by 33.4 percent when utilizing the developed machine to prepare the soil for growing melons beneath the film.

scholarly journals The influence of sectional volleyball classes on the physical preparedness of students of higher education institutions

2021 ◽  
pp. 42-47
Author(s):  
L. Dolzhenco ◽  
M. Perehinetc ◽  
O. Vekleche
Keyword(s):  
Higher Education ◽  
Physical Fitness ◽  
Positive Impact ◽  
Higher Education Institutions ◽  
Functional Condition ◽  
Positive Influence ◽  
Practical Training ◽  
Test Results ◽  
Long Jump ◽  
The Impact

This article considers the features of the impact of sectional volleyball classes on the physical training of students of higher education institutions. The main conceptual approaches to improving the process of physical fitness by section volleyball classes are presented and substantiated. The main aspects and prerequisites for the development and program of volleyball classes for students of higher education institutions, which included theoretical training, practical training (general, special, technical and tactical), as well as testing of physical fitness. Based on the obtained data, practical recommendations were developed that can be used by both freelance teachers and volleyball coaches. The recommendations contain sets of physical exercises that are aimed at improving the physical qualities of students and guidelines for their use. The positive influence of the made program on indicators of a functional condition of respiratory system, and also on development of physical qualities is established. Positive significant changes were noted in the test results: long jump, flexion and extension of the arms in a supine position, running 100 m. This indicates the positive impact of volleyball on speed and strength, strength and speed.

Dynamic capabilities and their impact on research organizations’ R&D and innovation performance

2017 ◽  
Vol 12 (4) ◽  
pp. 603-630 ◽  
Author(s):  
Kristina Babelytė-Labanauskė ◽  
Šarunas Nedzinskas
Keyword(s):  
Performance Indicators ◽  
Dynamic Capabilities ◽  
Positive Impact ◽  
Key Performance Indicators ◽  
Positive Influence ◽  
Influential Factors ◽  
Innovation Performance ◽  
Content Type ◽  
Research Organizations ◽  
Foreign Countries

Purpose The purpose of this paper is to reveal and justify influential factors of dynamic capabilities on research organizations’ R&D and innovation performance. Design/methodology/approach Adoption of seminal D. Teece’s (1997) concept of dynamic capabilities and operationalized matrix of key performance indicators in the area of R&D and innovation allowed the construction of the strategic management model for research organizations, consequently tested by methods of statistical analysis. Findings The empirical findings reveal that there exists positive influence of the dynamic capabilities on research organizations’ R&D and innovation performance. Explicitly, sensing, seizing and re-configuring dimensions of dynamic capabilities have positive impact on R&D and innovation results; consequently, the peculiarities of their inter-dependencies are identified. Research limitations/implications Delivered research is based on the investigation of Lithuanian research organizations’ dynamic capabilities and their impact on their R&D and innovation performance. Therefore, further research could be extended to foreign countries. Practical implications The model on management of research organization’s dynamic capabilities with the aim for better R&D and innovation performance is conceptualized and specified hereinafter. In the course of the research, constructed toolkit to eventually measure research organization’s R&D and innovation performance or use it as the set of key performance indicators in the benchmarking exercise is suggested. Originality/value The paper is one of the first to suggest novel application of dynamic capabilities’ view within the domain of research organizations.

scholarly journals PROFESSIONAL TRAINING OF SECURITY GUARDS ON THE BASIS OF SYSTEM MODULAR PROJECT OF OBJECT PROTECTION

2020 ◽  
Vol 2020 (3) ◽  
pp. 109-117
Author(s):  
Rostyslav Radzievskyi ◽  
Valerii Plisko ◽  
Valentyn Bondarenko
Keyword(s):  
Law Enforcement ◽  
Professional Training ◽  
Modular Design ◽  
Positive Influence ◽  
Design System ◽  
Practical Training ◽  
Main Stage ◽  
Security Guards ◽  
Modular Unit ◽  
The Impact

The article deals with the problematic issues of professional training of law enforcement officers who would be able to ensure reliable protection of objects and security of individuals. The analysis of security guards’ professional requirements and features of their official activity has been carried out. The method of training of security guards has been developed on the basis of systematization of knowledge, skills taking into account various modules, modular blocks in a single complex that gives the chance to the future security guard to master knowledge consistently and to provide the whole process algorithmization. On the basis of the created technique the model of security guards’ training is developed in general. The main training modules and their modular blocks are: acquisition of knowledge on the main areas of ensuring the overall organization of objects protection, which minimizes and eliminates the impact of other threats that may interfere with the normal functioning of the object; ability to provide a description of the object by external and internal characteristics; possession of a modern set of engineering and technical means of protection, including: fire-fighting modular unit, infrastructure unit, alarm system protection unit, access control and management systems, reliable modular unit, etc. The main stage of law enforcement personnel training is a formation of abilities to use protective modules in the conditions of external and internal interventions, threats etc. Actions of unauthorized entry on the object have been defined. A method of detecting factual intrusion (attempt) into the area of the protected object is provided. Examples of psychotic behavior of the offender are considered in the training process. The table shows the potential ability of the offender to act depending on the motivation level of emotional preparedness that correlates with his/her actions. The positive influence of the proposed innovations on the level of theoretical and practical training of future security guards has been revealed. The experiment confirmed the effectiveness of security guards training method based on the modular design system of object protection.

Performance indicators for student services

1990 ◽  
Vol 18 (1) ◽  
pp. 3-12 ◽  
Author(s):  
Sally Aldridge ◽  
David Legge
Keyword(s):  
Student Services ◽  
Performance Indicators

Pengaruh Kualitas Sumber Daya Manusia, Pemanfaatan Teknologi Informasi, Dan Sistem Pengendalian Intern Terhadap Ketepatwaktuan Pelaporan Keuangan Pemerintah Desa

2018 ◽  
Vol 26 (2) ◽  
pp. 131-143
Author(s):  
Marlinawati Marlinawati ◽  
Dewi Kusuma Wardani
Keyword(s):  
Information Technology ◽  
Control System ◽  
Human Resources ◽  
Financial Reporting ◽  
Internal Control ◽  
Positive Influence ◽  
Internal Control System ◽  
Speed Up ◽  
Village Government

The purpose of this research is to know the influence between the Quality of Human Resources, Utilization of Information Technology and Internal Control System Against Timeliness of Village Government Financial Reporting at Gunungkidul Regency. This research is causative research. The population is the village government in Gunungkidul Regency, especially in Gedangsari subdistrict. Criteria of respondents in the study were to village and village apparatus. We use questionnaire to collect data. We use multiple regression with SPSS program version 16.0 to analyze data. We find that quality of human resources and internal control system have a positive influence on the timeliness of village government financial reporting. On the other hand, utilization of information technology does not influence the timeliness of village government financial reporting. These imply that the quality of human resources and internal control system can speed up the preparation of village government financial reporting.

PENGARUH PERBAIKAN BERKESINAMBUNGAN TERHADAP KINERJA KARYAWAN (STUDI KASUS DI PT.RENTANG BUANA NIAGAMAKMUR TASIKMALAYA)

2019 ◽  
Vol 3 (1) ◽  
pp. 31-41
Author(s):  
Sri Sudiarti
Keyword(s):  
Data Analysis ◽  
Continuous Improvement ◽  
Research Method ◽  
Employee Performance ◽  
Sampling Technique ◽  
Positive Influence ◽  
Performance Criteria ◽  
Coefficient Of Determination ◽  
Analysis Techniques ◽  
Simple Regression

The objectives of this research are to know and to analyze about the effect of Continuous Improvement on the performance of employees at PT. Rentang Buana Niagamakmur (PT.RBN) Tasikmalaya. Research method which applied in this research is survey research method, while data collecting technique is done by through questionaire. Sampling technique applies sample is accidental sampling technique and the size sample is 55 respondents. Data analysis techniques used in the study is simple regression technique, analysis of the coefficient of determination  and t test. The results showed that the Continuous Improvement  including both criteria, including employee performance criteria, as well as Continuous Improvement  has a positive influence on employee performance of 76,4% in PT . Rentang Buana Niagamakmur (PT.RBN) Tasikmalaya.

FAKTOR-FAKTOR YANG MEMPENGARUHI KUALITAS AUDIT

2019 ◽  
Vol 5 (1) ◽  
pp. 50-63
Author(s):  
Heru Heryanto ◽  
Nur Laela ◽  
Riana R Dewi
Keyword(s):  
Linear Regression ◽  
Multiple Linear Regression ◽  
Audit Quality ◽  
Positive Influence ◽  
T Test ◽  
Coefficient Of Determination ◽  
Analysis Tool ◽  
Validity And Reliability ◽  
Test Analysis ◽  
Analysis Technique

This study aims to determine the significance of the influence of competence, independence, professionalism, auditor experience, accountability, and auditor's knowledge of audit quality. This study uses a questionnaire with a population and sample, namely all auditors who work at the Public Accounting Office (KAP) in the Special Region of Yogyakarta and Surakarta. Sampling techniques using Convenience Sampling with a sample of 61 respondents. The data used in this study is a questionnaire using a Likert scale 1 to 5. The data analysis technique used in this study is multiple linear regression using the SPSSprogram for Windows. The analysis tool in this study using validity and reliability, the classical assumption (normality test, multicollinearity, heteroscedasticity test and autocorrelation test) while the data were analyzed using multiple linear regression test, t test, F test and the coefficient of determination (R2).Based on the results of the t-test analysis performed, it shows that there is a positive influence of competence, independence, professionalism, auditor experience, accountability, and auditor's knowledge of audit quality and simultaneously competency, independence, professionalism, auditor experience, accountability, and auditor knowledge variables affect quality audit

Educational STEM designing of virtual and real devices on the Arduino platform

2020 ◽  
pp. 17-27
Author(s):  
S. G. Grigoriev ◽  
M. V. Kurnosenko ◽  
A. M. Kostyuk
Keyword(s):  
Virtual Environments ◽  
Electronic Devices ◽  
Practical Training ◽  
Full Time ◽  
Stem Design ◽  
Face To Face ◽  
Interdisciplinary Knowledge ◽  
Virtual Modeling ◽  
Surface Mounting

The article discusses possible forms of educational STEM projects in the field of electronics and device control using Arduino controllers. As you know, the implementation of such STEM projects can be carried out not only using various electronic constructors, but also using virtual modeling environments. The knowledge obtained during modeling in virtual environments makes it possible to increase the efficiency of face-to-face practical training with a real constructor, and to improve the quality of students’ knowledge. The use of virtual modeling environments in combination with the use of real constructors provides links between distance and full-time learning. A real constructors can be used simultaneously by both the teacher and the student, jointly practicing the features of solving practical problems. The article provides examples of using a virtual environment for preliminary prototyping of circuits available in the documentation for electronic constructors, to familiarize students with the basics of designing and assembling electronic circuits using the surface mounting method and on a breadboard, as well as programming controllers on the Arduino platform that control electronic devices. This approach allows students to accelerate the assimilation of various interdisciplinary knowledge in the field of natural sciences using STEM design.

Sign in / Sign up

Export Citation Format

Share Document