scholarly journals Stochastic analysis of impact mixing of bulk materials in a rotary apparatus

2021 ◽  
Vol 247 ◽  
pp. 01048
Author(s):  
Anna Kapranova ◽  
Daria Bahaeva ◽  
Dmitry Stenko ◽  
Daria Fedorova ◽  
Alexander Vatagin ◽  
...  
Keyword(s):  
Stochastic Analysis ◽  
Design Parameters ◽  
Mineral Fertilizers ◽  
Characteristic Parameters ◽  
Bulk Materials ◽  
Rarefied Flows ◽  
Second Stage ◽  
Rotary Apparatus ◽  
Wide Range ◽  
Angle Of Reflection

The purpose of this work is to analyze the distribution of bulk materials according to the characteristic parameters of the mixing process at the second stage of processing in a rotary apparatus. The design of the rotary device has a wide range, including for the needs of agriculture, for example, when forming mixtures of mineral fertilizers and multifunctional pyrethroid drugs. At this mixing stage, impact interaction with the bump surface of rarefied flows of bulk components occurs, obtained by scattering the rotating drum by elastic blades at the previous stage of the technological chain. The obtained dependencies between the characteristic angle of dispersion of bulk materials by the specified mixing drum (at the first stage) and the angle of reflection of the corresponding flows from the baffle surface (at the second stage) are used in the stochastic analysis of impact mixing. Modeling of the differential functions of the distribution of the number of particles of mixed bulk components by the angle of reflection from the baffle surface is carried out taking into account the physical and mechanical characteristics of the working materials, design parameters, and operating parameters of the rotary apparatus. The calculation results made it possible to reveal the effective ranges of variation of the characteristic parameters for the shock mixing of bulk materials in a rotary apparatus.

scholarly journals INTEGRATED STUDY OF THE EFFICIENCY OF GRINDING MATERIAL IN AN IMPACT-CENTRIFUGAL MILL

2021 ◽  
Vol 447 (3) ◽  
pp. 129-136
Author(s):  
D. Chyrkun ◽  
A. Levdanskiy ◽  
S. Yarmolik ◽  
V. Golubev ◽  
D. Zhumadullayev
Keyword(s):  
Differential Equations ◽  
Air Flow ◽  
Separation Process ◽  
Theoretical Research ◽  
Design Parameters ◽  
Separation Mechanism ◽  
Technological Parameters ◽  
Bulk Materials ◽  
Working Volume ◽  
Wide Range

The analysis of existing methods of air classification of crushed bulk materials is carried out, priority directions of their development and improvement are identified, the hardware design of these methods and the main approaches to the calculation of air classifiers are studied. The conclusion is made about a rather isolated motion of particles in the working volume of the classifier at optimal performance. The prospects of dry separation methods and the progressiveness of creating multistage gravitational classifiers have been established. Theoretical studies of the separation process in a gravity classifier with overflow shelves have been carried out. The regularities of the process of separation of bulk materials in air classifiers have been established, reliable methods have been developed for calculating their technological and design parameters in order to create highly efficient and productive industrial plants. Theoretical dependencies and differential equations are obtained, which characterize the influence on the separation mechanism of technological and design parameters of the classifier. The results of solving the equations of motion made it possible to determine the main design parameters of the apparatus based on the technological requirements for productivity and the dispersed composition of the final products. On the basis of theoretical research, analytical relationships and differential equations have been developed that describe the separation process in a gravity classifier with overflow shelves. The use of these equations made it possible to simulate the air flow in the classifier, to obtain a field of air flow velocities for any design and technological parameters. This, in turn, shows the direction of movement of particles of different sizes or densities and makes it possible to estimate the boundary size of separation, and also allows you to study the interaction of the air flow with the material being separated in a wide range of technological and design parameters of the classifier, and, ultimately, to determine the boundary size separation and particle size range of the resulting fractions of the finished product. The relationship between technological and design parameters of the apparatus is theoretically determined.

Substantiation the machine with a basket for the application of mineral fertilizers and other bulk materials with the upper arrangement of the feeding device

2019 ◽  
pp. 37-43
Author(s):  
Fesenko, H.
Keyword(s):  
Fat Body ◽  
Mineral Fertilizer ◽  
The Body ◽  
Mineral Fertilizers ◽  
Analytical Mechanics ◽  
Bulk Materials ◽  
The Stability ◽  
Working Bodies ◽  
The Relationship ◽  
Stable Flow

Purpose. Increasing the uniformity of distribution of mineral fertilizers and other bulk materials due to the stability of their feed from the body to the spreading working bodies using the top feeder. Methods. The following methods are used to achieve this aim: the method of comparing the differences between individual groups of fertilizers, the method of analyzing the properties of a new technical system, the method of functional inventiveness, and the methods of theoretical and analytical mechanics. Results. The traction body of the conveyor of the upper feed of the body fat body machine for mineral fertilizers and other bulk materials was substantiated and the relationship between the height of its scrapers and the distance between them was established, as well as the nature of the mineral fertilizer pressure on the curvilinear wall of the body. In addition, the design of the advanced body fertilizer spreader is justified, which ensures a stable flow of fertilizers from the body due to the improvement of the top feeder. Conclusions. Because of the conducted researches, the advantages of machines equipped with top feeder are found. They create the conditions for the forced feeding mineral fertilizers and other loose materials from the container to the distribution bodies, which is a prerequisite for their evenness on the surface. With this, the imperfection of known machines with the top feeder constrains their introduction into agricultural production. On this account, a more thoroughly constructed solution of the body feeder of the top feed is substantiated, in which the conveyor provides a stable supply of fertilizers from the body with reduced energy consumption during operation. Keywords: analysis, feed, upper device, conveyor, stability, fertilizers, flow ability, body.

scholarly journals Multi-stable composite twisting structure for morphing applications

2012 ◽  
Vol 468 (2141) ◽  
pp. 1230-1251 ◽  
Author(s):  
X. Lachenal ◽  
P. M. Weaver ◽  
S. Daynes
Keyword(s):  
Analytical Model ◽  
Material Properties ◽  
Degrees Of Freedom ◽  
Design Parameters ◽  
Engineering Structures ◽  
The Past ◽  
Wide Range ◽  
Morphing Structure ◽  
Low Mass ◽  
Unstable States

Conventional shape-changing engineering structures use discrete parts articulated around a number of linkages. Each part carries the loads, and the articulations provide the degrees of freedom of the system, leading to heavy and complex mechanisms. Consequently, there has been increased interest in morphing structures over the past decade owing to their potential to combine the conflicting requirements of strength, flexibility and low mass. This article presents a novel type of morphing structure capable of large deformations, simply consisting of two pre-stressed flanges joined to introduce two stable configurations. The bistability is analysed through a simple analytical model, predicting the positions of the stable and unstable states for different design parameters and material properties. Good correlation is found between experimental results, finite-element modelling and predictions from the analytical model for one particular example. A wide range of design parameters and material properties is also analytically investigated, yielding a remarkable structure with zero stiffness along the twisting axis.

Closed-Form Correlation of Buildings Energy Use With Key Design Parameters Calibrated Using a Genetic Algorithm

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Raed I. Bourisli ◽  
Adnan A. AlAnzi
Keyword(s):  
Genetic Algorithm ◽  
Closed Form ◽  
Energy Use ◽  
Building Design ◽  
Office Buildings ◽  
Design Parameters ◽  
Wide Range ◽  
Variable Function ◽  
Real Coded Genetic Algorithm ◽  
The Difference

This work aims at developing a closed-form correlation between key building design variables and its energy use. The results can be utilized during the initial design stages to assess the different building shapes and designs according to their expected energy use. Prototypical, 20-floor office buildings were used. The relative compactness, footprint area, projection factor, and window-to-wall ratio were changed and the resulting buildings performances were simulated. In total, 729 different office buildings were developed and simulated in order to provide the training cases for optimizing the correlation’s coefficients. Simulations were done using the VisualDOE TM software with a Typical Meteorological Year data file, Kuwait City, Kuwait. A real-coded genetic algorithm (GA) was used to optimize the coefficients of a proposed function that relates the energy use of a building to its four key parameters. The figure of merit was the difference in the ratio of the annual energy use of a building normalized by that of a reference building. The objective was to minimize the difference between the simulated results and the four-variable function trying to predict them. Results show that the real-coded GA was able to come up with a function that estimates the thermal performance of a proposed design with an accuracy of around 96%, based on the number of buildings tested. The goodness of fit, roughly represented by R2, ranged from 0.950 to 0.994. In terms of the effects of the various parameters, the area was found to have the smallest role among the design parameters. It was also found that the accuracy of the function suffers the most when high window-to-wall ratios are combined with low projection factors. In such cases, the energy use develops a potential optimum compactness. The proposed function (and methodology) will be a great tool for designers to inexpensively explore a wide range of alternatives and assess them in terms of their energy use efficiency. It will also be of great use to municipality officials and building codes authors.

Application areas of the angle reflector

2021 ◽  
pp. 54-59
Author(s):  
L. R. Yurenkova ◽  
O. A. Yakovuk ◽  
I. V. Morozov
Keyword(s):  
Radio Wave ◽  
Outer Space ◽  
Road Transport ◽  
Optical Systems ◽  
Design Parameters ◽  
Design Activity ◽  
Primary Role ◽  
Beam Laser ◽  
Wide Range ◽  
Graphical Calculation

The article provides examples of how the device known as the «angle reflector» a few decades ago has been increasingly used in various fields of science and technology in recent years. Angle reflectors are designed to change (reflect) optical and radar rays in the direction, opposite to the original direction. At present, angle reflectors are widely used to ensure the safety of road transport on dangerous road sections. Radio wave reflectors have the same design as optical ones; therefore, in radio detection and location, angle reflectors are used to send warning signals to ship radars on bridge supports, beacons and buoys. Modern angle reflectors attached to meteorological probes allow determining the direction and speed of the wind at high altitude, which is especially important in the study of the outer space. In recent years, devices have been developed to improve the accuracy of radar stations calibration. The examples of graphical calculation of angle reflectors presented in the article clearly demonstrate the primary role of geometry in the design activity of an engineer. The graphical calculation is based on the theoretical positions of projective geometry. The design and calculation of optical systems is carried out by the graphoanalytic method, since only with a combination of graphical and analytical methods it is possible to accurately calculate the course of a light beam, laser, or radio wave and thereby determine the design parameters of the devices. The article focuses on a graphical method for calculating two types of angle reflectors using orthogonal projection, due to which modern engineers will be able to create more up-to-date designs of optical systems with a wide range of applications.

Airbag Inflators

1999 ◽  
Author(s):  
William G. Broadhead ◽  
D. Theodore Zinke
Keyword(s):  
High Speed ◽  
Motor Vehicle ◽  
Seat Belt ◽  
Design Parameters ◽  
Steering Wheel ◽  
Instrument Panel ◽  
Highway Traffic ◽  
National Highway Traffic Safety ◽  
Column Collapse ◽  
Wide Range

Abstract The design of an airbag restraint system presents a classic engineering challenge. There are numerous design parameters that need to be optimized to cover the wide range of occupant sizes, occupant positions and vehicle collision modes. Some of the major parameters that affect airbag performance include, the airbag inflator characteristics, airbag size and shape, airbag vent size, steering column collapse characteristics, airbag cover characteristics, airbag fold pattern, knee bolsters, seat, seat belt characteristics, and vehicle crush characteristics. Optimization of these parameters can involve extremely costly programs of sled tests and full scale vehicle crash tests. Federal Motor Vehicle Safety Standards (FMVSS) with regard to airbag design are not specific and allow flexibility in component characteristics. One design strategy, which is simplistic and inexpensive, is to utilize a very fast, high output gas generator (inflator). This ensures that the bag will begin restraining the occupant soon after deployment and can make up for deficiencies in other components such as inadequate steering column collapse or an unusually stiff vehicle crush characteristic. The use of such inflators generally works well for properly positioned occupants in moderate to high-speed frontal collisions by taking advantage of the principle of ridedown. When an airbag quickly fills the gap between the occupant and the instrument panel or steering wheel it links him to the vehicle such that he utilizes the vehicle’s front-end crush to help dissipate his energy, thus reducing the restraint forces. Unfortunately, powerful airbag systems can be injurious to anyone in the path of the deploying airbag. This hazard is present for short statured individuals, out of position children or any occupant in a collision that results in extra ordinary crash sensing time. Currently, the National Highway Traffic Safety Administration (NHTSA) is proposing to rewrite FMVSS 208 to help reduce such hazards.

Development of a Methodology for Model Testing of Utor Welded Joints of a Vertical Cylindrical Tank

2021 ◽  
pp. 21-27
Author(s):  
D.A. Neganov ◽  
◽  
A.E. Zorin ◽  
O.I. Kolesnikov ◽  
G.V. Nesterov ◽  
...  
Keyword(s):  
Welded Joints ◽  
Strain State ◽  
Welded Joint ◽  
Design Parameters ◽  
Cylindrical Tank ◽  
Stress Strain ◽  
The Real ◽  
Stress Strain State ◽  
Hydraulic Machines ◽  
Wide Range

The methodology of laboratory modeling of the loading of utor welded joint of the tank is presented. The methodology is based on testing of the special design sample. It allows under uniaxial tension on the typical servo-hydraulic machines to reproduce in the zone of a utor welded joint the combined action of bending and shear forces, similar to that which occurs during the operation of a vertical cylindrical tank. To assess the distribution of the stress-strain state in the proposed design of the sample under its loading, the finite element modeling was performed in the ANSYS software package. It showed the fundamental correspondence of the stress distribution in the zone of the utor node in the sample and in the real tank. The experimental studies consisted in carrying out tests for the durability of a series of 16 samples loaded with the maximum force in the cycle, causing the calculated stresses in the zone of the welded utor node in the range of 100–200 % from the maximum permissible ones. The obtained results showed that the maximum loaded zone, where the destruction of the samples occurred, is the near-seam zone of the utor welded joint on the inside of the tank. This corresponds to the statistics of the real tank failures. It is established that the developed methodology ensures the possibility of carrying out correct resource tests of the tank utor welded joints. It is also possible to vary the stress-strain state scheme within a wide range in the area of the utor welded joint by changing the design parameters of the test sample. In compliance with the regulated welding technologies and the absence of unacceptable defects in the welded joint, the utor node has a high resource, which significantly exceeding 50 years of the tank operation.

Uncertainty in Collapse Strength Prediction of Sandwich Pipelines

2021 ◽  
Author(s):  
U. Bhardwaj ◽  
A. P. Teixeira ◽  
C. Guedes Soares
Keyword(s):  
Probabilistic Models ◽  
Uncertainty Propagation ◽  
Simulation Method ◽  
External Pressure ◽  
Design Parameters ◽  
Collapse Strength ◽  
Parameters Uncertainty ◽  
Wide Range ◽  
Model Predictions ◽  
Strength Models

Abstract This paper assesses the uncertainty in the collapse strength of sandwich pipelines under external pressure predicted by various strength models in three categories based on interlayer adhesion conditions. First, the validity of the strength models is verified by comparing their predictions with sandwich pipeline collapse test data and the corresponding model uncertainty factors are derived. Then, a parametric analysis of deterministic collapse strength predictions by models is conducted, illustrating insights of models’ behaviour for a wide range of design configurations. Furthermore, the uncertainty among different model predictions is perceived at different configurations of outer and inner pipes and core thicknesses. A case study of a realistic sandwich pipeline is developed, and probabilistic models are defined to basic design parameters. Uncertainty propagation of models’ predictions is assessed by the Monte Carlo simulation method. Finally, the strength model predictions of sandwich pipelines are compared to that of an equivalent single walled pipe.

Direct Liquid Cooling of High Flux LED Systems: Hot Spot Abatement

2013 ◽  
Author(s):  
Enes Tamdogan ◽  
Mehmet Arik ◽  
M. Baris Dogruoz
Keyword(s):  
Hot Spots ◽  
Hot Spot ◽  
Heat Removal ◽  
Heat Fluxes ◽  
Light Extraction ◽  
Junction Temperature ◽  
System Level ◽  
Design Parameters ◽  
Liquid Cooling ◽  
Wide Range

With the recent advances in wide band gap device technology, solid-state lighting (SSL) has become favorable for many lighting applications due to energy savings, long life, green nature for environment, and exceptional color performance. Light emitting diodes (LED) as SSL devices have recently offered unique advantages for a wide range of commercial and residential applications. However, LED operation is strictly limited by temperature as its preferred chip junction temperature is below 100 °C. This is very similar to advanced electronics components with continuously increasing heat fluxes due to the expanding microprocessor power dissipation coupled with reduction in feature sizes. While in some of the applications standard cooling techniques cannot achieve an effective cooling performance due to physical limitations or poor heat transfer capabilities, development of novel cooling techniques is necessary. The emergence of LED hot spots has also turned attention to the cooling with dielectric liquids intimately in contact with the heat and photon dissipating surfaces, where elevated LED temperatures will adversely affect light extraction and reliability. In the interest of highly effective heat removal from LEDs with direct liquid cooling, the current paper starts with explaining the increasing thermal problems in electronics and also in lighting technologies followed by a brief overview of the state of the art for liquid cooling technologies. Then, attention will be turned into thermal consideration of approximately a 60W replacement LED light engine. A conjugate CFD model is deployed to determine local hot spots and to optimize the thermal resistance by varying multiple design parameters, boundary conditions, and the type of fluid. Detailed system level simulations also point out possible abatement techniques for local hot spots while keeping light extraction at maximum.

Aerodynamic Similarity Principles and Scaling Laws for Windmilling Fans

2018 ◽  
Author(s):  
Dilip Prasad
Keyword(s):  
Rotational Speed ◽  
Pressure Loss ◽  
Scaling Laws ◽  
Dynamic Pressure ◽  
Stagnation Pressure ◽  
Design Parameters ◽  
Similarity Parameter ◽  
Wide Range ◽  
Simulation Results ◽  
Good Agreement

Windmilling requirements for aircraft engines often define propulsion and airframe design parameters. The present study is focused is on two key quantities of interest during windmill operation: fan rotational speed and stage losses. A model for the rotor exit flow is developed, that serves to bring out a similarity parameter for the fan rotational speed. Furthermore, the model shows that the spanwise flow profiles are independent of the throughflow, being determined solely by the configuration geometry. Interrogation of previous numerical simulations verifies the self-similar nature of the flow. The analysis also demonstrates that the vane inlet dynamic pressure is the appropriate scale for the stagnation pressure loss across the rotor and splitter. Examination of the simulation results for the stator reveals that the flow blockage resulting from the severely negative incidence that occurs at windmill remains constant across a wide range of mass flow rates. For a given throughflow rate, the velocity scale is then shown to be that associated with the unblocked vane exit area, leading naturally to the definition of a dynamic pressure scale for the stator stagnation pressure loss. The proposed scaling procedures for the component losses are applied to the flow configuration of Prasad and Lord (2010). Comparison of simulation results for the rotor-splitter and stator losses determined using these procedures indicates very good agreement. Analogous to the loss scaling, a procedure based on the fan speed similarity parameter is developed to determine the windmill rotational speed and is also found to be in good agreement with engine data. Thus, despite their simplicity, the methods developed here possess sufficient fidelity to be employed in design prediction models for aircraft propulsion systems.

Sign in / Sign up

Export Citation Format

Share Document