scholarly journals Analysis of the Effect of Robots in the Treatment of Pancreatic Cancer Based on Smart Medicine

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Hongquan Qiu ◽  
Dongzhi Wang ◽  
Haiyan Miao
Keyword(s):  
Pancreatic Cancer ◽  
Clinical Effect ◽  
Control Experiment ◽  
Average Value ◽  
Localization Scheme ◽  
Adjacent Frame ◽  
Sequencing Method ◽  
Hash Algorithm ◽  
The Difference ◽  
Detection And Localization

In order to study the effect of robots in the treatment of pancreatic cancer in the context of smart medical, this paper improves the robot recognition technology and data processing technology and improves the system kernel algorithm through the hash algorithm. Unlike the traditional sequencing method that directly uses the gray average value as a feature, the hash algorithm calculates the gray three-average value of each frame block and uses the difference of the three-average value of adjacent frame blocks to perform detection. Moreover, this paper proposes a detection and localization scheme based on hash local matching, which consists of two parts: coarse matching and fine matching. In addition, this paper designs a control experiment to analyze the effect of robots in the treatment of pancreatic cancer, counts multiple sets of data, and uses mathematical statistics to process and visually display the experimental data. The research shows that the robot has a good clinical effect in the treatment of pancreatic cancer.

The Effect of Jigsaw Methode and Motivation on Students’ of Learning Outcomes

2020 ◽  
Vol 3 (1) ◽  
pp. 20-30
Author(s):  
Yunita Yunita ◽  
Hidayat Hidayat ◽  
Harun Sitompul
Keyword(s):  
Cooperative Learning ◽  
Student Learning ◽  
Learning Outcomes ◽  
Student Learning Outcomes ◽  
Learning Motivation ◽  
Learning Approaches ◽  
High Learning ◽  
Average Value ◽  
The Difference ◽  
Low Motivation

This study aims to: (1) investigate the effect of Jigsaw cooperative learning on students learning outcomes; (2) find the difference in learning outcomes between high and low learning motivation and (3) find the interaction between learning approaches and learning motivation towards learning outcomes. The population of the study is students of grade IVa, IVb, IVc at SD Kasih Ibu Patumbak and the sample in this study is grade IVa with 35 students and grade IVb with 35 students. The results show that: (1) the average student learning outcomes of jigsaw cooperative learning is 28.40 while conventional is 24.14. Thus, students learning outcomes that get cooperative learning of jigsaw type are higher than conventional learning, (2) Students who have high motivation get an average value = 30.74, while low motivation is 22.72. Thus, it can be concluded that there are differences in student learning outcomes having high learning motivation and low learning motivation, and (3) students learning outcomes  taught by jigsaw cooperative learning are high learning motivation groups (32.94), and low learning motivation groups (24.58), while students taught with conventional learning are high learning motivation groups (28.40 ), and low motivation groups (20,95). Thus, there is no interaction between learning approaches and learning motivation towards learning outcomes.

Pengaruh Jumlah Pencucian Beras dengan Kadar Klorin

2017 ◽  
Vol 1 (1) ◽  
pp. 89
Author(s):  
Indah Purwaningsih ◽  
Supriyanto Supriyanto
Keyword(s):  
Mucous Membrane ◽  
Confidence Level ◽  
Iodometric Titration ◽  
Titration Method ◽  
Anova Test ◽  
Average Value ◽  
Significant Difference ◽  
The Difference

Abstract: Chlorine is a green halogen-shaped halogen gas at normal temperature and serves as bleach, stain remover and disinfectant. Chlorine is now widely used for bleaching rice so that less quality rice looks like quality rice. Chlorine is very toxic and causes mucous membrane irritation, highly reactive and very powerful oxidizer. The purpose of this research was to determine the difference of chlorine level in chlorinated rice washed once, twice and 3 times. The sample in this study amounted to 11 samples calculated by replication formula. Each sample was treated 3 times, ie 1 washed once, 2 washed twice and washed 3 times. The samples then examined by iodometric titration method. Based on the results of the study using ANOVA test, 11 samples obtained the average value of chlorine after washed once amount of 0.0176%, after washed twice amount of 0.0111%, and after washed 3 times amount of 0.0052% with the value significance p = 0.03 (p <0.05) at 95% confidence level which means there was a significant difference between chlorine levels in chlorinated rice washed once, twice and 3 times.Abstrak: Klorin merupakan unsur halogen berbentuk gas berwarna kuning kehijauan pada suhu normal danberfungsi sebagai pemutih, penghilang noda maupun desinfektan. Klorin sekarang banyak digunakan untuk bahan pemutih beras agar beras yang kurang berkualitas tampak seperti beras berkualitas. Klorin sangat toksik dan menyebabkan iritasi membran mukosa, sangat reaktif dan merupakan oksidator yang sangat kuat. Tujuan dari penelitian ini ialah untuk mengetahui perbedaan kadar klorin pada beras berklorin yang dicuci sebanyak 1 kali, 2 kali dan 3 kali. Sampel dalam penelitian ini berjumlah 11 sampel yang dihitung dengan rumus replikasi. Setiap sampel diberi perlakuan sebanyak 3 kali, yaitu 1 kali pencucian, 2 kali pencucian dan 3 kali pencucian. Sampel penelitian kemudian diperiksa dengan metode titrasi iodometri. Berdasarkan hasil penelitian menggunakan uji Anova secara komputerisasi terhadap 11 sampel diperoleh nilai rata-rata kadar klorin setelah 1 kali pencucian sebesar 0,0176 %, setelah 2 kali pencucian sebesar 0,0111 %, dan setelah 3 kali pencucian sebesar 0,0052 % dengan nilai signifkansi p = 0,03 (p<0,05) pada tingkat kepercayaan 95% yang artinya ada perbedaan yang bermakna antara kadar klorin pada beras berklorin yang dicuci sebanyak 1 kali, 2 kali dan 3 kali.

Results of studying the dimensional accuracy of the bases of complete removable prostheses made using 3D printing and traditional technologies

2020 ◽  
pp. 34-39
Author(s):  
Vokulova Yu.A. Vokulova ◽  
E.N. Zhulev
Keyword(s):  
3D Printing ◽  
Traditional Method ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Digital Technologies ◽  
Dimensional Accuracy ◽  
3D Printer ◽  
Significance Level ◽  
Average Value ◽  
The Difference

This article presents the results of studying the dimensional accuracy of the bases of complete removable prostheses made using a 3D printer and the traditional method. Bases of complete removable prostheses were made using an intraoral laser scanner iTero Cadent (USA) and a 3D printer Asiga Max UV (Australia). To study the dimensional accuracy of the bases of complete removable prostheses, we used the DentalCAD 2.2 Valletta software. The Nonparametric Wilcoxon W-test was used for statistical analysis of the obtained data. We found that the average value of the difference with the standard for bases made using digital technologies is 0.08744±0.0484 mm. The average value of the difference with the standard for bases made by the traditional method is 0.5654±0.1611 mm. Based on these data, we concluded that the bases of complete removable prostheses made using modern digital technologies (intraoral laser scanning and 3D printer) have a higher dimensional accuracy compared to the bases of complete removable prostheses made using the traditional method with a significance level of p<0.05 (Wilcoxon's W-test=0, p=0.031). Keywords: digital technologies in dentistry, digital impressions, intraoral scanner, 3D printing, ExoCAD, complete removable dentures.

scholarly journals Cohort study of the overall survival of patients with pancreatic cancer in a hospital of specialties of Quito-Ecuador in the period 2007–2017

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Andrés Moreno Roca ◽  
Luciana Armijos Acurio ◽  
Ruth Jimbo Sotomayor ◽  
Carlos Céspedes Rivadeneira ◽  
Carlos Rosero Reyes ◽  
...  
Keyword(s):  
Pancreatic Cancer ◽  
Cohort Study ◽  
Survival Time ◽  
Univariate Analysis ◽  
Rank Test ◽  
Kaplan Meier ◽  
Significant Difference ◽  
Icd 10 ◽  
The Difference ◽  
Clinical Records

Abstract Objectives Pancreatic cancers in most patients in Ecuador are diagnosed at an advanced stage of the disease, which is associated with lower survival. To determine the characteristics and global survival of pancreatic cancer patients in a social security hospital in Ecuador between 2007 and 2017. Methods A retrospective cohort study and a survival analysis were performed using all the available data in the electronic clinical records of patients with a diagnosis of pancreatic cancer in a Hospital of Specialties of Quito-Ecuador between 2007 and 2017. The included patients were those coded according to the ICD 10 between C25.0 and C25.9. Our univariate analysis calculated frequencies, measures of central tendency and dispersion. Through the Kaplan-Meier method we estimated the median time of survival and analyzed the difference in survival time among the different categories of our included variables. These differences were shown through the log rank test. Results A total of 357 patients diagnosed with pancreatic cancer between 2007 and 2017 were included in the study. More than two-thirds (69.9%) of the patients were diagnosed in late stages of the disease. The median survival time for all patients was of 4 months (P25: 2, P75: 8). Conclusions The statistically significant difference of survival time between types of treatment is the most relevant finding in this study, when comparing to all other types of treatments.

Electronic irradiation of TlInSxSe2−x (x = 1): Morphology, structure and raman scattering

2021 ◽  
Author(s):  
M. Yu. Tashmetov ◽  
F. K. Khallokov ◽  
N. B. Ismatov ◽  
I. I. Yuldashova ◽  
S. Kh. Umarov
Keyword(s):  
Surface Morphology ◽  
Single Crystal ◽  
Single Phase ◽  
Phase State ◽  
Monoclinic Structure ◽  
Average Value ◽  
Single Phase State ◽  
Before And After ◽  
Electronic Irradiation ◽  
The Difference

It is shown that the replacement of a part of sulfur atoms with selenium atoms in a TlInS2 single crystal stimulates the formation of a single-phase state with a monoclinic structure (space group [Formula: see text]/[Formula: see text] in TlInS[Formula: see text]Se[Formula: see text] ([Formula: see text]). Irradiation with 2 MeV electrons and a fluence of [Formula: see text] electron/cm2 of powder TlInS[Formula: see text]Se[Formula: see text] ([Formula: see text]) leads to an increase in the crystallite size from 56.5 nm to 65 nm, which is most likely associated with a decrease in the interface. The difference between the surface morphology of the synthesized TlInS[Formula: see text]Se[Formula: see text] ([Formula: see text]) single crystal and the surface morphology of the TlInS2 single crystal is established, which consists in a decrease in the height and width of the roughness in TlInS[Formula: see text]Se[Formula: see text] ([Formula: see text]). Irradiation of a TlInS[Formula: see text]Se[Formula: see text] ([Formula: see text]) single crystal with electrons with a fluence of [Formula: see text] electron/cm2 does not lead to a change in the height of the tubercle on its surface, and the average value of its width increases more than ten-fold. The identity of the peaks in the Raman spectra of the TlInS[Formula: see text]Se[Formula: see text] ([Formula: see text]) single crystal before and after its irradiation with electrons with an energy of 2 MeV and upto a fluence of [Formula: see text] electron/cm2, along with the absence of a shift of the peaks, indicates the radiation resistance of the TlInS[Formula: see text]Se[Formula: see text] ([Formula: see text]) single crystal.

Anisotropy Gas Reservoir Drainage Radius and Quantitative Well Interference Study

2013 ◽  
Vol 275-277 ◽  
pp. 1285-1291 ◽  
Author(s):  
Zheng Long Gao ◽  
Hong Fu Fan ◽  
Zhi Bin Gao
Keyword(s):  
Production Rate ◽  
Major Axis ◽  
Productivity Analysis ◽  
Analysis Method ◽  
Equivalent Radius ◽  
Average Value ◽  
Drainage Radius ◽  
Well Spacing ◽  
Cumulative Production ◽  
The Difference

Unstable productivity analysis method was used to obtain the equivalent radius of 77 wells and the result shows that the equivalent radius ranges from 30 to 970m with an average value of 230m in McKittrick Hills. The difference range of the radius is mainly caused by varying formation properties, gas saturation, production time, etc. Permeability anisotropy changes the drainage from round to ellipse. The major axis and the minor axis of the ellipse are determined by the ratio of major and minor permeability. Current pressure distribution was obtained and was found to be consistent with the modified drainage results, which demonstrates that the unstable productivity analysis method is applicable in the study of gas well drainage radius. An interference well and an observation well’s model was constructed to study well interference quantitatively. When the well spacing is larger than 750m, the productivity will be reduced by 20%. The production rate of interference well is more sensitive to the cumulative production of observation well, when the production rate of interference well is below 16.8×104m3/d.

scholarly journals INDIVIDUAL VARIABILITY OF MORPHOLOGICAL FEATURES OF POLISH LARCH IN THE CONDITIONS OF INTRODUCTION

2020 ◽  
Vol 9 (4) ◽  
pp. 33-40
Author(s):  
Maksim Lavrenov ◽  
Sergey Vasil'ev ◽  
Vladimir Nikitin ◽  
Vera Savchenkova
Keyword(s):  
Siberian Larch ◽  
Taxonomic Status ◽  
Individual Variability ◽  
Morphological Features ◽  
European Larch ◽  
Average Value ◽  
European Part Of Russia ◽  
The Difference ◽  
Growing Conditions ◽  
Independent Species

Polish larch trees are among the most valuable among forest species both in natural growing conditions and in the conditions of introduction. However, its taxonomic status is not fully resolved due to the similarity in morphological features with European and Siberian larch. We conducted a comparative analysis of these species of larch on the morphological features of cones and needles. The studies were carried out in the conditions of introduction in the center of the European part of Russia. We present the average value of the trait (XSR ± Sx) and the degree of its variation (V %). The reliability of the difference between the samples according to these characteristics was determined based on the calculation of the student's criterion t. As a result, we found that the Polish larch has smaller cones and significantly differs from the European and Siberian larch in all studied features (length of cones, width of cones, number of scales in cones, length of needles). These results indicate the isolation of the Polish larch, but this pattern can be expressed not only when referring to the Polish larch in the rank of an independent species – Larix polonica Racib., but also as a subspecies of European larch (Larix decidua var. polonica (Racib. ex Wóycicki) Ostenf. & Syrach).

scholarly journals Difference in height of maxillary alveolar ridge on edentulous women and dentate women using panoramic radiography

2019 ◽  
Vol 10 (2) ◽  
pp. 1243-1248
Author(s):  
Cek Dara Manja ◽  
Dennis
Keyword(s):  
Panoramic Radiography ◽  
Total Sample ◽  
Mechanical Stimulus ◽  
Average Height ◽  
Alveolar Ridge ◽  
Cross Sectional ◽  
Average Value ◽  
Significant Difference ◽  
The Difference ◽  
The Right

The height of the maxillary alveolar ridge can be measured using panoramic radiography. The decline occurred because the height of the alveolar ridge undergoes slow physiological resorption due to the absence of mechanical stimulus. The purpose of this research is to know the difference and the average height of the maxillary alveolar ridge in edentulous and dentate women using panoramic radiography. This study is an analytical method with a cross-sectional approach. A total sample of 40 women, edentulous and dentate has been measured. Measurements were made by measuring the distance between the lowest point of the infraorbital ridge and alveolar crest maxilla on the incisor point, right and left premolar, right and left molar. A statistical test is done using independent t-test. The results showed that the average value of a dentate women sample is greater than edentulous. The average value obtained by the dentate sample is greatest in incisor point by 37,57mm± 3,34mm and the smallest at the right molar point by 33,87mm ± 2,81mm. The average value obtained by the edentulous sample is greatest in incisor point by 35,30mm ± 2,79mm and the smallest at the right molar point by 31,84mm ± 3,85mm. It can be concluded that there is a significant difference in the height of the maxillary alveolar ridge on an edentulous sample and dentate, except the right molar teeth. The average height of the maxillary alveolar ridge in an edentulous sample is 33,35mm ± 3,43mm, and the dentate sample is 35,66mm ± 3,21mm.

scholarly journals Hubungan antara Kedalaman Permukaan Air Tanah dengan Salinitas di Pesisir Pantai Kungkai Baru serta Penggunaan Model Discovery Learning

2018 ◽  
Vol 2 (2) ◽  
pp. 178-182
Author(s):  
Sutijo Joko Sudiro ◽  
Muchammad Farid ◽  
Eko Swistoro
Keyword(s):  
Learning Outcomes ◽  
Learning Model ◽  
Discovery Learning ◽  
High Ability ◽  
Significance Level ◽  
Average Value ◽  
A Value ◽  
Quasi Experimental ◽  
The Difference ◽  
The Relationship

ABSTRACT [Relationship between Groundwater Surface Depth with Salinity at the Coast of New Kungkai Beach and its Implementation on Discovery Learning Model]. The aims of this study were 1) to describe the relationship between groundwater surface depth with salinity in the coastal areas of new kungkai beach of Seluma, and 2) to determine the improvement of learning outcomes (cognitive) of high ability students, moderate and low by using discovery learning model on the concept of static fluid in class X computer and network engineering at SMK Negeri 3 Seluma. This research was a quasi experimental research with one groups pretest-posttest design. The results showed: 1) The relationship between depth with salinity has a value of 0.6478 with a significance level of 0.001 (<0.05); 2) Learning with discovery learning model can improve student learning outcomes on cognitive aspects (knowledge). Increased cognitive results can be seen from the average value of the initial test, the final test and the average value of gain in the class x Tkj is high-ability groups are at high criteria with a value of 0.75 gain in the group is in the criteria medium with the value of gain 0,52 and in the low group were in moderate criteria with a gain value of 0.44. There is a difference in learning outcomes between the high, medium and low groups. The difference is shown by Fcount > Ftable (4.04 > 3.35) with a significance level of 5%. Keywords: Groundwater surface depth; salinity; discovery learning model; SMKN 3 Seluma.

scholarly journals Effect of iRoot BP Plus Pulpotomy for Immediate Repair in Children with Young Permanent Teeth Crown Fracture

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Jiaying Song
Keyword(s):  
Success Rate ◽  
Clinical Effect ◽  
Permanent Teeth ◽  
Control Group ◽  
Observation Group ◽  
Control Groups ◽  
Before And After ◽  
Random Number Table ◽  
The Difference ◽  
And Control

Objective: To explore the clinical effect of iRoot BP Plus pulpotomy for immediate repair in children with young permanent teeth crown fracture. Methods: From September 2017 to October 2018, 80 children (80 affected teeth) with young permanent teeth crown fracture who treated in the hospital were selected as the research objects. Random number table method was used to divide them into observation and control groups with each group of forty patients (40 affected teeth). The children in the control group were treated with calcium hydroxide resin, while the observation group were treated with iRoot BP Plus for immediate repair. The surgical success rate was compared between the two groups, and the pulp vitality before and after treatment were compared. Results: At 3 months and 6 months after surgery, the success rate of children in the observation group was higher than that in the control group, and the difference was statistically significant (P<0.05). The percentage of children with negative pulp activity in the observation group was higher than that in the control group, and the difference was statistically significant (P<0.05). Conclusion: Immediate repair with iRoot BP Plus pulpotomy in children with young permanent teeth crown fracture has significant clinical effect.

Sign in / Sign up

Export Citation Format

Share Document