scholarly journals Plagiarism Meets Paraphrasing: Insights for the Next Generation in Automatic Plagiarism Detection

2013 ◽  
Vol 39 (4) ◽  
pp. 917-947 ◽  
Author(s):  
Alberto Barrón-Cedeño ◽  
Marta Vila ◽  
M. Martí ◽  
Paolo Rosso

Although paraphrasing is the linguistic mechanism underlying many plagiarism cases, little attention has been paid to its analysis in the framework of automatic plagiarism detection. Therefore, state-of-the-art plagiarism detectors find it difficult to detect cases of paraphrase plagiarism. In this article, we analyze the relationship between paraphrasing and plagiarism, paying special attention to which paraphrase phenomena underlie acts of plagiarism and which of them are detected by plagiarism detection systems. With this aim in mind, we created the P4P corpus, a new resource that uses a paraphrase typology to annotate a subset of the PAN-PC-10 corpus for automatic plagiarism detection. The results of the Second International Competition on Plagiarism Detection were analyzed in the light of this annotation. The presented experiments show that (i) more complex paraphrase phenomena and a high density of paraphrase mechanisms make plagiarism detection more difficult, (ii) lexical substitutions are the paraphrase mechanisms used the most when plagiarizing, and (iii) paraphrase mechanisms tend to shorten the plagiarized text. For the first time, the paraphrase mechanisms behind plagiarism have been analyzed, providing critical insights for the improvement of automatic plagiarism detection systems.

2021 ◽  
Vol 10 (10(5)) ◽  
pp. 1655-1669
Author(s):  
Edinah Tendani ◽  
Magdalena Petronella (Nellie) Swart ◽  
Cine Van Zyl

Restaurants in Zimbabwe have various gastronomic opportunities as Zimbabwean cuisine as it is represented by different ethnic groups, presenting an array of traditional cuisine. At the same time, gastronomic tourism needs to be innovative to survive the harsh travel restrictions and economic downturn caused by the Coronavirus pandemic. As Zimbabwe’s culinary tourism is still in its infancy it will require a post-pandemic recovery strategy. As aspect of this is the attitudes of diners. Thus, the purpose of this study is an examination of the relationship between the Culinary Tourist Value Scorecard (CTVSC) and the behavioural involvement of culinary tourists after visiting Zimbabwean ethnic restaurants. A cross-sectional survey, using a seven-point Likert scale, was employed to generate the data from 500 culinary tourists through convenience sampling. The scores between CTVSC and Culinary Tourist Behavioural Involvement (CTBI) were statistically significant (r = .80, n = 500, p<.001). Thus, hospitality managers must monitor and improve their culinary products while also meeting the needs of first-time and returning diners. It is recommended that state-of-the-art ethnic cuisine menus and refined the service offerings are adopted.


Author(s):  
Norman Meuschke ◽  
Bela Gipp

The problem of academic plagiarism has been present for centuries. Yet, the widespread dissemination of information technology, including the internet, made plagiarising much easier. Consequently, methods and systems aiding in the detection of plagiarism have attracted much research within the last two decades. Researchers proposed a variety of solutions, which we will review comprehensively in this article. Available detection systems use sophisticated and highly efficient character-based text comparisons, which can reliably identify verbatim and moderately disguised copies. Automatically detecting more strongly disguised plagiarism, such as paraphrases, translations or idea plagiarism, is the focus of current research. Proposed approaches for this task include intrinsic, cross-lingual and citation-based plagiarism detection. Each method offers unique strengths and weaknesses; however, none is currently mature enough for practical use. In the future, plagiarism detection systems may benefit from combining traditional character-based detection methods with these emerging detection approaches.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Quang-Vinh Dang

Purpose This study aims to explain the state-of-the-art machine learning models that are used in the intrusion detection problem for human-being understandable and study the relationship between the explainability and the performance of the models. Design/methodology/approach The authors study a recent intrusion data set collected from real-world scenarios and use state-of-the-art machine learning algorithms to detect the intrusion. The authors apply several novel techniques to explain the models, then evaluate manually the explanation. The authors then compare the performance of model post- and prior-explainability-based feature selection. Findings The authors confirm our hypothesis above and claim that by forcing the explainability, the model becomes more robust, requires less computational power but achieves a better predictive performance. Originality/value The authors draw our conclusions based on their own research and experimental works.


2011 ◽  
Vol 10 (3) ◽  
pp. 139-143 ◽  
Author(s):  
Gazi Islam ◽  
Sarah E. S. Zilenovsky

This note examines the relationship between affirmative action (AA) program perceptions and women’s self-ascribed capacity and desire to become leaders. We propose that women who believe that their organization implements a program of preferential selection toward women will experience negative psychological effects leading to lowered self-expectations for leadership, but that this effect will be moderated by their justice perceptions of AA programs. We test this proposition empirically for the first time with a Latin American female sample. Among Brazilian women managers, desire but not self-ascribed capacity to lead was reduced when they believed an AA policy was in place. Both desire’s and capacity’s relationships with belief in an AA policy were moderated by justice perceptions.


2019 ◽  
pp. 42-44
Author(s):  
I.V. GUSAROV ◽  
V.A. OSTAPENKO ◽  
T.V. NOVIKOVА

Впервые в мире создана популяция зубров на территории 60 градусов северной широты. В новых климатических условиях разведения и сохранения зубров определены и проанализированы факторы существования вида на севере Европейской части РФ. Выявлены признаки, динамика численности, которые являются составной частью системы, предназначенной для управления биоразнообразием. Интродукция, являясь процессом введения в экосистему нехарактерных для нее видов, может усиливать изменения биоценозов как положительно, так и отрицательно. Насколько быстро и успешно проходит процесс адаптации заселенного вида, и усматривается его влияние на окружающую среду зависит дальнейшее существование зубров и в целом биоразнообразия. В статье обсуждаются вопросы взаимоотношения зубров с другими видами копытных и хозяйственной деятельностью человека, а также дальнейшим использованием зубров в сельскохозяйственном производстве. Пластичность зубров, выявление изменений и их анализ при вселении видов в новые условия обитания необходимы не только для определения развития или деградации биоценозов и в целом экосистемы, но и прогноза социально-экономических последствий интродукции как одного из методов сохранения редких и исчезающих видов фауны.For the first time in the world, a bison population has been created in an area of 60 degrees north latitude. In the new climatic conditions of breeding and preservation of bison, the factors of the species existence in the north of the European part of the Russian Federation are identified and analyzed. The signs, dynamics of abundance, which are an integral part of the system designed to manage biodiversity are identified, since the preservation of biological diversity on the planet is one of the main problems of our time. Introduction, being the process of introducing non-typical species into an ecosystem, can enhance changes in biocenoses, both positively and negatively. The question posing sounds especially when it comes to such a large hoofed animal as the European bison. How quickly and successfully the process of adaptation of the universe takes place and its environmental impact is seen depends on the continued existence of bison and biodiversity in general. The article discusses the relationship of bison with other types of ungulates and human activities, as well as the further use of bison in agricultural production. How these issues will be resolved positively depends on the future of these animals. Thus, the plasticity of bison, the identification of changes and their analysis, with the introduction of species into new habitat conditions is necessary not only to determine the development or degradation of biocenoses and the ecosystem as a whole, but also to predict the socio-economic consequences due to the introduction as one of the methods of preserving rare and endangered species of fauna.


Author(s):  
David Willetts

Universities have a crucial role in the modern world. In England, entrance to universities is by nation-wide competition which means English universities have an exceptional influence on schools--a striking theme of the book. This important book first investigates the university as an institution and then tracks the individual on their journey to and through university. In A University Education, David Willetts presents a compelling case for the ongoing importance of the university, both as one of the great institutions of modern society and as a transformational experience for the individual. The book also makes illuminating comparisons with higher education in other countries, especially the US and Germany. Drawing on his experience as UK Minister for Universities and Science from 2010 to 2014, the author offers a powerful account of the value of higher education and the case for more expansion. He covers controversial issues in which he was involved from access for disadvantaged students to the introduction of L9,000 fees. The final section addresses some of the big questions for the future, such as the the relationship between universities and business, especially in promoting innovation.. He argues that the two great contemporary trends of globalisation and technological innovation will both change the university significantly. This is an authoritative account of English universities setting them for the first time in their new legal and regulatory framework.


Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 87
Author(s):  
Ali Umut Şen ◽  
Helena Pereira

In recent years, there has been a surge of interest in char production from lignocellulosic biomass due to the fact of char’s interesting technological properties. Global char production in 2019 reached 53.6 million tons. Barks are among the most important and understudied lignocellulosic feedstocks that have a large potential for exploitation, given bark global production which is estimated to be as high as 400 million cubic meters per year. Chars can be produced from barks; however, in order to obtain the desired char yields and for simulation of the pyrolysis process, it is important to understand the differences between barks and woods and other lignocellulosic materials in addition to selecting a proper thermochemical method for bark-based char production. In this state-of-the-art review, after analyzing the main char production methods, barks were characterized for their chemical composition and compared with other important lignocellulosic materials. Following these steps, previous bark-based char production studies were analyzed, and different barks and process types were evaluated for the first time to guide future char production process designs based on bark feedstock. The dry and wet pyrolysis and gasification results of barks revealed that application of different particle sizes, heating rates, and solid residence times resulted in highly variable char yields between the temperature range of 220 °C and 600 °C. Bark-based char production should be primarily performed via a slow pyrolysis route, considering the superior surface properties of slow pyrolysis chars.


2021 ◽  
Vol 80 (3) ◽  
pp. 1329-1337
Author(s):  
Jure Mur ◽  
Daniel L. McCartney ◽  
Daniel I. Chasman ◽  
Peter M. Visscher ◽  
Graciela Muniz-Terrera ◽  
...  

Background: The genetic variant rs9923231 (VKORC1) is associated with differences in the coagulation of blood and consequentially with sensitivity to the drug warfarin. Variation in VKORC1 has been linked in a gene-based test to dementia/Alzheimer’s disease in the parents of participants, with suggestive evidence for an association for rs9923231 (p = 1.8×10–7), which was included in the genome-wide significant KAT8 locus. Objective: Our study aimed to investigate whether the relationship between rs9923231 and dementia persists only for certain dementia sub-types, and if those taking warfarin are at greater risk. Methods: We used logistic regression and data from 238,195 participants from UK Biobank to examine the relationship between VKORC1, risk of dementia, and the interplay with warfarin use. Results: Parental history of dementia, APOE variant, atrial fibrillation, diabetes, hypertension, and hypercholesterolemia all had strong associations with vascular dementia (p < 4.6×10–6). The T-allele in rs9923231 was linked to a lower warfarin dose (βperT - allele = –0.29, p < 2×10–16) and risk of vascular dementia (OR = 1.17, p = 0.010), but not other dementia sub-types. However, the risk of vascular dementia was not affected by warfarin use in carriers of the T-allele. Conclusion: Our study reports for the first time an association between rs9923231 and vascular dementia, but further research is warranted to explore potential mechanisms and specify the relationship between rs9923231 and features of vascular dementia.


Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 1977
Author(s):  
Ricardo Oliveira ◽  
Liliana M. Sousa ◽  
Ana M. Rocha ◽  
Rogério Nogueira ◽  
Lúcia Bilro

In this work, we demonstrate for the first time the capability to inscribe long-period gratings (LPGs) with UV radiation using simple and low cost amplitude masks fabricated with a consumer grade 3D printer. The spectrum obtained for a grating with 690 µm period and 38 mm length presented good quality, showing sharp resonances (i.e., 3 dB bandwidth < 3 nm), low out-of-band loss (~0.2 dB), and dip losses up to 18 dB. Furthermore, the capability to select the resonance wavelength has been demonstrated using different amplitude mask periods. The customization of the masks makes it possible to fabricate gratings with complex structures. Additionally, the simplicity in 3D printing an amplitude mask solves the problem of the lack of amplitude masks on the market and avoids the use of high resolution motorized stages, as is the case of the point-by-point technique. Finally, the 3D printed masks were also used to induce LPGs using the mechanical pressing method. Due to the better resolution of these masks compared to ones described on the state of the art, we were able to induce gratings with higher quality, such as low out-of-band loss (0.6 dB), reduced spectral ripples, and narrow bandwidths (~3 nm).


Sign in / Sign up

Export Citation Format

Share Document