scholarly journals EXPERIENCE IN USE OF RECUPERATIVE BURNERS DEVICES IN FURNACES OF PERIODIC ACTION FOR HEAT TREATMENT OF BLANKS IN SPC-2 OJSC «BSW – MANAGEMENT COMPANY OF HOLDING «BMC»

2018 ◽  
pp. 32-36 ◽  
Author(s):  
D. S. Jadchenko
Keyword(s):  
Cost Optimization ◽  
Initial Point ◽  
Heating System ◽  
Correct Choice ◽  
Point Of View ◽  
Environmental Friendliness ◽  
Periodic Action ◽  
Air Heating ◽  
Harmful Emissions ◽  
The One

In building and modernizing industrial furnaces the following important factors should be taken into account: on the one hand, economic efficiency must be ensured, and on the other hand it is important to reduce harmful emissions into the atmosphere, improve the working conditions of personnel, etc. At the same time, constantly increasing requirements for productivity and environmental friendliness should not adversely affect the period of cost recovery.This article considers the experience of using recuperative burners. Both positive and negative aspects of the use of burners are considered from the point of view of economics, ecology and technology.An important initial point of cost optimization is the correct choice of a heating system complete with an automatic control system. One example of an effective heating system is a burner with a built in air heating system (recuperative burner), which saves fuel, reduces harmful emissions and simultaneously improves the technical and economic performance of the furnaces.

scholarly journals Analysis and Optimization of Dual-Heating System Costs

2019 ◽  
Vol 19 (2) ◽  
pp. 48-55
Author(s):  
L. Năstase ◽  
H. Andrei ◽  
E. Lungu ◽  
Veronica Dulea ◽  
E. Diaconu
Keyword(s):  
Social Life ◽  
Cost Optimization ◽  
Electric Heating ◽  
Heating System ◽  
Point Of View ◽  
Monitoring And Control ◽  
Global Energy ◽  
Heating Systems ◽  
Optimization Function ◽  
Comparative Results

AbstractThe importance of the heating systems is given both by the quality brought to the social life and from the point of view of pollution. Environmental pollution, global energy crisis as well as global energy policy and our gas heating systems. This motivating reason for the heating system, in terms of their viability and pollution reductions, is the future. In this article a dual heating system is presented, while an electric heating system and one of the gases, the care is coordinated by a monitoring and control system. The operating strategy of the two systems is dictated by an algorithm and a cost optimization function. The use of a dual heating system is the result of comparative results regarding the measurement of the measures and the simulation of the algorithm.

Understanding functional illiteracy from a policy, adult education, and cognition point of view: Towards a joint referent framework

2019 ◽  
Vol 30 (2) ◽  
pp. 109-122
Author(s):  
Aleksandar Bulajić ◽  
Miomir Despotović ◽  
Thomas Lachmann
Keyword(s):  
Adult Education ◽  
Operational Definition ◽  
Literacy Skills ◽  
Point Of View ◽  
Industrialized Countries ◽  
Functional Illiteracy ◽  
Scale Levels ◽  
Components Of Reading ◽  
The One ◽  
Definition Of

Abstract. The article discusses the emergence of a functional literacy construct and the rediscovery of illiteracy in industrialized countries during the second half of the 20th century. It offers a short explanation of how the construct evolved over time. In addition, it explores how functional (il)literacy is conceived differently by research discourses of cognitive and neural studies, on the one hand, and by prescriptive and normative international policy documents and adult education, on the other hand. Furthermore, it analyses how literacy skills surveys such as the Level One Study (leo.) or the PIAAC may help to bridge the gap between cognitive and more practical and educational approaches to literacy, the goal being to place the functional illiteracy (FI) construct within its existing scale levels. It also sheds more light on the way in which FI can be perceived in terms of different cognitive processes and underlying components of reading. By building on the previous work of other authors and previous definitions, the article brings together different views of FI and offers a perspective for a needed operational definition of the concept, which would be an appropriate reference point for future educational, political, and scientific utilization.

Recommendations of The Ombudsman’s Dilemma: Between Law Enforcement Officials and Protection of Credibility

2018 ◽  
Vol 2 ◽  
pp. 1-12
Author(s):  
Dyah Adriantini Sintha Dewi
Keyword(s):  
Law Enforcement ◽  
Public Service ◽  
Public Services ◽  
Point Of View ◽  
Law Enforcement Officials ◽  
Muslim Majority ◽  
The Republic ◽  
The Government ◽  
The One ◽  
Oversight Body

The Ombudsman as an external oversight body for official performance, in Fikih Siyasah (constitutionality in Islam) is included in the supervision stipulated in legislation (al-musahabah al-qomariyah). Supervision is done so that public service delivery to the community is in accordance with the rights of the community. This is done because in carrying out its duties, officials are very likely to conduct mal administration, which is bad public services that cause harm to the community. The Ombudsman is an institution authorized to resolve the mal administration issue, in which one of its products is by issuing a recommendation. Although Law No. 37 of 2018 on the Ombudsman of the Republic of Indonesia states that the recommendation is mandatory, theombudsman's recommendations have not been implemented. This is due to differences in point of view, ie on the one hand in the context of law enforcement, but on the other hand the implementation of the recommendation is considered as a means of opening the disgrace of officials. Recommendations are the last alternative of Ombudsman's efforts to resolve the mal administration case, given that a win-win solution is the goal, then mediation becomes the main effort. This is in accordance with the condition of the Muslim majority of Indonesian nation and prioritizes deliberation in resolving dispute. Therefore, it is necessary to educate the community and officials related to the implementation of the Ombudsman's recommendations in order to provide good public services for the community, which is the obligation of the government.

Defending the Difference

2017 ◽  
Keyword(s):  
Social Sciences ◽  
Natural Sciences ◽  
Point Of View ◽  
True Nature ◽  
Natural Entities ◽  
The Social ◽  
The World ◽  
Methodological Difference ◽  
The Difference ◽  
The One

Dreyfus argues that there is a basic methodological difference between the natural sciences and the social sciences, a difference that derives from the different goals and practices of each. He goes on to argue that being a realist about natural entities is compatible with pluralism or, as he calls it, “plural realism.” If intelligibility is always grounded in our practices, Dreyfus points out, then there is no point of view from which one can ask about or provide an answer to the one true nature of ultimate reality. But that is consistent with believing that the natural sciences can still reveal the way the world is independent of our theories and practices.

Performance analysis of domestic solar air heating system using V-shaped baffles – An experimental study

2021 ◽  
pp. 095440892110162
Author(s):  
Vijayakumar Rajendran ◽  
Harichandran Ramasubbu ◽  
Karthick Alagar ◽  
Vignesh Kumar Ramalingam
Keyword(s):  
Experimental Study ◽  
Performance Improvement ◽  
Mass Flow ◽  
Thermal Efficiency ◽  
Heating System ◽  
Solar Air Heater ◽  
Absorber Plate ◽  
Air Heating ◽  
Mass Flow Rates ◽  
Carbon Dioxide Mitigation

An experimental study has been carried out to enhance a solar air heater’s performance by integrating artificial roughness through baffles on the absorber plate. In this paper, the thermal and energy matrices analysis of a Solar Air Heater (SAH) roughened with V up perforated baffles have been investigated. The effect of various mass flow rates on the SAH was analyzed with and without baffles. Experimental outputs like outlet air temperature, useful energy (heat) gain and thermal efficiency were evaluated to confirm the performance improvement. The baffled absorber plate SAH was found to give the maximum thermal efficiency and useful energy gain of 89.3% and 1321.37 W at a mass flow rate of 0.0346 kg/s, 13% and 12% higher than SAH without baffle. This result showed that the V up-shaped ribs in flow arrangement provide better thermal performance than smooth plate SAH for the parameter investigated. Energy matrices analysis and carbon dioxide mitigation of the SAH system were also analyzed.

scholarly journals Energy Saving and Charging Discharging Characteristics of Multiple PCMs Subjected to Internal Air Flow

Fluids ◽  
2021 ◽  
Vol 6 (8) ◽  
pp. 275
Author(s):  
Ahmed J. Hamad
Keyword(s):  
Phase Change ◽  
Energy Saving ◽  
Air Temperature ◽  
Temperature Control ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Heating System ◽  
Air Heating ◽  
Room Model ◽  
Model Temperature

One essential utilization of phase change materials as energy storage materials is energy saving and temperature control in air conditioning and indirect solar air drying systems. This study presents an experimental investigation evaluating the characteristics and energy savings of multiple phase change materials subjected to internal flow in an air heating system during charging and discharging cycles. The experimental tests were conducted using a test rig consisting of two main parts, an air supply duct and a room model equipped with phase change materials (PCMs) placed in rectangular aluminum panels. Analysis of the results was based on three test cases: PCM1 (Paraffin wax) placed in the air duct was used alone in the first case; PCM2 (RT–42) placed in the room model was used alone in the second case; and in the third case, the two PCMs (PCM1 and PCM2) were used at the same time. The results revealed a significant improvement in the energy savings and room model temperature control for the air heating system incorporated with multiple PCMs compared with that of a single PCM. Complete melting during the charging cycle occurred at temperatures in the range of 57–60 °C for PCM1 and 38–43 °C for PCM2, respectively, thereby validating the reported PCMs’ melting–solidification results. Multiple PCMs maintained the room air temperature at the desired range of 35–45.2 °C in the air heating applications by minimizing the air temperature fluctuations. The augmentation in discharging time and improvement in the room model temperature using multiple PCMs were about 28.4% higher than those without the use of PCMs. The total energy saving using two PCMs was higher by about 29.5% and 46.7% compared with the use of PCM1 and PCM2, respectively. It can be concluded that multiple PCMs have revealed higher energy savings and thermal stability for the air heating system considered in the current study.

scholarly journals Twisted 6d (2, 0) SCFTs on a circle

2021 ◽  
Vol 2021 (7) ◽  
Author(s):  
Zhihao Duan ◽  
Kimyeong Lee ◽  
June Nahmgoong ◽  
Xin Wang
Keyword(s):  
Lie Groups ◽  
Point Of View ◽  
Partition Functions ◽  
Congruence Subgroups ◽  
Gauge Groups ◽  
Simple Lie Groups ◽  
Instanton Contribution ◽  
Elliptic Genera ◽  
Supersymmetric Gauge ◽  
The One

Abstract We study twisted circle compactification of 6d (2, 0) SCFTs to 5d $$ \mathcal{N} $$ N = 2 supersymmetric gauge theories with non-simply-laced gauge groups. We provide two complementary approaches towards the BPS partition functions, reflecting the 5d and 6d point of view respectively. The first is based on the blowup equations for the instanton partition function, from which in particular we determine explicitly the one-instanton contribution for all simple Lie groups. The second is based on the modular bootstrap program, and we propose a novel modular ansatz for the twisted elliptic genera that transform under the congruence subgroups Γ0(N) of SL(2, ℤ). We conjecture a vanishing bound for the refined Gopakumar-Vafa invariants of the genus one fibered Calabi-Yau threefolds, upon which one can determine the twisted elliptic genera recursively. We use our results to obtain the 6d Cardy formulas and find universal behaviour for all simple Lie groups. In addition, the Cardy formulas remain invariant under the twist once the normalization of the compact circle is taken into account.

scholarly journals Linkages between Energy Delivery and Economic Growth from the Point of View of Sustainable Development and Seaports

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4255
Author(s):  
Elżbieta Szaruga ◽  
Zuzanna Kłos-Adamkiewicz ◽  
Agnieszka Gozdek ◽  
Elżbieta Załoga
Keyword(s):  
Sustainable Development ◽  
Crude Oil ◽  
Cross Correlation ◽  
Point Of View ◽  
Oil Products ◽  
Modern Approach ◽  
Economic Cycles ◽  
Study Results ◽  
The One ◽  
Oil And Oil Products

This paper presents the synchronisation of economic cycles of GDP and crude oil and oil products cargo volumes in major Polish seaports. On the one hand, this issue fits into the concept of sustainable development including decoupling; on the other hand, the synchronisation may be an early warning tool. Crude oil and oil products cargo volumes are a specific barometer that predicts the next economic cycle, especially as they are primary sources of energy production. The research study applies a number of TRAMO/SEATS methods, the Hodrick–Prescott filter, spectral analysis, correlation and cross-correlation function. Noteworthy is the modern approach of using synchronisation of economic cycles as a tool, which was described in the paper. According to the study results, the cyclical components of the cargo traffic and GDP were affected by the leakage of other short-term cycles. However, based on the cross-correlation, it was proved that changes in crude oil and oil products cargo volumes preceded changes in GDP by 1–3 quarters, which may be valuable information for decision-makers and economic development planners.

scholarly journals ZnOTe Compounds Grown by DC-Magnetron Co-Sputtering

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 570
Author(s):  
Olga Sánchez ◽  
Manuel Hernández-Vélez
Keyword(s):  
Molar Fraction ◽  
Variable Parameter ◽  
Point Of View ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sample Series ◽  
Solid Phases ◽  
The One ◽  
High Bulk ◽  
Substrate Sample

ZnOTe compounds were grown by DC magnetron cosputtering from pure Tellurium (Te) and Zinc (Zn) cathodes in O2/Ar atmosphere. The applied power on the Zn target was constant equal to 100 W, while the one applied on the Te target took two values, i.e., 5 W and 10 W. Thus, two sample series were obtained in which the variable parameter was the distance from the Te targets to the substrate. Sample compositions were determined by Rutherford Backscattering Spectroscopy (RBS) experiments. Structural analysis was done using X-Ray diffraction (XRD) spectrometry and the growth of the hexagonal w-ZnO phase was identified in the XRD spectra. RBS results showed high bulk homogeneity of the samples forming ZnOTe alloys, with variable Te molar fraction (MF) ranging from 0.48–0.6% and from 1.9–3.1% for the sample series obtained at 5 W and 10 W, respectively. The results reflect great differences between the two sample series, particularly from the structural and optical point of view. These experiments point to the possibility of Te doping ZnO with the permanence of intrinsic defects, as well as the possibility of the formation of other Te solid phases when its content increases. The results and appreciable variations in the band gap transitions were detected from Photoluminescence (PL) measurements.

scholarly journals Percolation and tortuosity in heart-like cells

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
R. Rabinovitch ◽  
Y. Biton ◽  
D. Braunstein ◽  
I. Aviram ◽  
R. Thieberger ◽  
...  
Keyword(s):  
Action Potential ◽  
Forest Fire ◽  
Sinus Node ◽  
Heart Tissue ◽  
Point Of View ◽  
Physical Point ◽  
Electrical Currents ◽  
Single Wave ◽  
Heart Arrhythmia ◽  
The One

AbstractIn the last several years, quite a few papers on the joint question of transport, tortuosity and percolation have appeared in the literature, dealing with passage of miscellaneous liquids or electrical currents in different media. However, these methods have not been applied to the passage of action potential in heart fibrosis (HF), which is crucial for problems of heart arrhythmia, especially of atrial tachycardia and fibrillation. In this work we address the HF problem from these aspects. A cellular automaton model is used to analyze percolation and transport of a distributed-fibrosis inflicted heart-like tissue. Although based on a rather simple mathematical model, it leads to several important outcomes: (1) It is shown that, for a single wave front (as the one emanated by the heart's sinus node), the percolation of heart-like matrices is exactly similar to the forest fire case. (2) It is shown that, on the average, the shape of the transport (a question not dealt with in relation to forest fire, and deals with the delay of action potential when passing a fibrotic tissue) behaves like a Gaussian. (3) Moreover, it is shown that close to the percolation threshold the parameters of this Gaussian behave in a critical way. From the physical point of view, these three results are an important contribution to the general percolation investigation. The relevance of our results to cardiological issues, specifically to the question of reentry initiation, are discussed and it is shown that: (A) Without an ectopic source and under a mere sinus node operation, no arrhythmia is generated, and (B) A sufficiently high refractory period could prevent some reentry mechanisms, even in partially fibrotic heart tissue.

Sign in / Sign up

Export Citation Format

Share Document