scholarly journals Studi Kemampuan Adsorpsi Ion Logam Cr6+ oleh Tanah Vulkanik “Studi Kasus Wilayah Industri Penyamakan Kulit, Garut”

2020 ◽  
Vol 21 (1) ◽  
pp. 125-130
Author(s):  
Nyoman Sumawijaya ◽  
Asep Mulyono ◽  
Anna Fadliah Rusydi
Keyword(s):  
Adsorption Capacity ◽  
Waste Treatment ◽  
Liquid Waste ◽  
Freundlich Isotherm ◽  
Organic Content ◽  
Maximum Adsorption Capacity ◽  
Soil Media ◽  
Pass Through ◽  
Soil Organic Content ◽  
The Impact

ABSTRACTThe leather tanning industry in Sukaregang, Garut Regency, produces liquid waste containing Chromium and is discharged directly into the Ciwalen River without a waste treatment process. The content of Cr6+ as metal ions in the waste can also contaminating groundwater. The movement of Cr6+ will pass through the soil media before entering to the groundwater wells. The capability of the soil to adsorb the contaminant will reduce the impact on groundwater. The purpose of this study was to determine the ability of the soil in adsorbing and inhibiting the movement of Cr6+ into groundwater. The study was carried out at Sukaregang, Garut Regency and conducting adsorption experiments with a batch system. The analysis was carried out using the Langmuir and Freundlich isotherm model. The experimental results showed that Cr6+ adsorbed ranged from 38% to 57% of the initial concentration. The results from Langmuir Isotherm were: the distribution coefficient (Kads) was 0.45 L/mg and the maximum adsorption capacity (qm) was 2.44 mg/100g sorbent with R2 = 0.959 and Freundlich Isotherm was: qm was 2,86 mg/100g sorbent and Kads was 0,35 L/mg with R2 = 0,860. This large adsorption capacity is caused by soil texture and soil organic content. The soil in Sukaregang tanning industries has a high adsorption capacity towards Cr6+ contaminants.Keywords: adsorption, chromium, Cr6+, contaminant, volcanic soil, GarutABSTRAKIndustri penyamakan kulit di wilayah Sukaregang, Kabupaten Garut, menghasilkan limbah cair yang mengandung Kromium dan dibuang ke Sungai Ciwalen tanpa proses pengolahan limbah. Kandungan ion logam Cr6+ pada limbah dapat mencemari air tanah. Pergerakan ion logam Cr6+ akan melalui media tanah sebelum memasuki sumur-sumur penduduk. Beberapa jenis tanah mempunyai kemampuan untuk mengadsorpsi ion pencemar sehingga tidak semua limbah yang meresap ke dalam tanah mencemari air tanah. Tujuan dari penelitian ini adalah untuk mengetahui peranan tanah dalam menghambat pergerakan ion logam Cr6+ ke dalam air tanah. Penelitian dilaksanakan dengan pengambilan sampel tanah di daerah Sukaregang, Garut, dan melakukan percobaan adsorpsi dengan sistem batch. Sementara analisis dilakukan dengan menggunakan model isotherm Langmuir dan Freundlich. Hasil percobaan menunjukkan konsentrasi Cr6+ yang teradsorpsi berkisar 38 – 57 % dari konsentrasi awal. Kads sebesar 0,45 L/mg dan qm sebesar 2,44 mg/100g tanah dengan nilai R2 = 0,959 menggunakan isoterm Langmuir dan isoterm Freundlich memberikan nilai qm sebesar 2,86 mg/100 g sorbent dan Kads sebesar 0,35 L/mg dengan R2 = 0,860. Tingginya daya adsorpsi ini disebabkan oleh tekstur tanah dan kandungan bahan organik. Tanah di wilayah penelitian memiliki daya adsorpsi yang besar terhadap kontaminan Cr6+.Kata kunci: adsorpsi, kromium, Cr6+, kontaminan, tanah vulkanik, Garut

Kinetics of lead ion biosorption from aqueous solution onto lyophilized Aspergillus niveus

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Hülya Karaca ◽  
Turgay Tay ◽  
Merih Kıvanç
Keyword(s):  
Adsorption Capacity ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Lead Ions ◽  
Lead Ion ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Aspergillus Niveus ◽  
Pseudo Second Order

The biosorption of lead ions (Pb2+) onto lyophilized fungus Aspergillus niveus was investigated in aqueous solutions in a batch system with respect to pH, contact time and initial concentration of the ions at 30 °C. The maximum adsorption capacity of lyophilized A. niveus was found to be 92.6 mg g−1 at pH 5.1 and the biosorption equilibrium was established about in 30 min. The adsorption capacity obtained is one of the highest value among those reported in the literature. The kinetic data were analyzed using the pseudo-first-order kinetic, pseudo-second-order kinetic, and intraparticle diffusion equations. Kinetic parameters, such as rate constants, equilibrium adsorption capacities, and related correlation coefficients for the kinetic models were calculated and discussed. It was found that the adsorption of lead ions onto lyophilized A. niveus biomass fit the pseudo-second-order kinetic model well. The Langmuir and Freundlich isotherm parameters for the lead ion adsorption were applied and the Langmuir model agreed better with the adsorption of lead ions onto lyophilized A. niveus.

scholarly journals Adsorption of Mn2+ from Aqueous Solution Using Manganese Oxide-Coated Hollow Polymethylmethacrylate Microspheres (MHPM)

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Dhiraj Dutta ◽  
Jyoti Prasad Borah ◽  
Amrit Puzari
Keyword(s):  
Aqueous Solution ◽  
Manganese Oxide ◽  
Adsorption Capacity ◽  
High Surface ◽  
High Surface Area ◽  
Freundlich Isotherm ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Coated Sand

Results of investigation on adsorption of Mn2+ from aqueous solution by manganese oxide-coated hollow polymethylmethacrylate microspheres (MHPM) are reported here. This is the first report on Mn-coated hollow polymer as a substitute for widely used materials like green sand or MN-coated sand. Hollow polymethylmethacrylate (HPM) was prepared by using a literature procedure. Manganese oxide (MnO) was coated on the surface of HPM (MHPM) by using the electroless plating technique. The HPM and MHPM were characterized by using optical microscopy (OM), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Optical and scanning micrographs were used to monitor the surface properties of the coated layer which revealed the presence of MnO on the surface of HPM. TGA showed the presence of 4-5% of MnO in MHPM. Adsorption isotherm studies were carried out as a function of pH, initial ion concentration, and contact time, to determine the adsorption efficiency for removal of Mn2+ from contaminated water by the synthesized MHPM. The isotherm results showed that the maximum adsorption capacity of MnO-coated HPM to remove manganese contaminants from water is 8.373 mg/g. The obtained R 2 values of Langmuir isotherm and Freundlich isotherm models were 1 and 0.87, respectively. Therefore, R 2 magnitude confirmed that the Langmuir model is best suited for Mn2+ adsorption by a monolayer of MHPM adsorbent. The material developed shows higher adsorption capacity even at a higher concentration of solute ions, which is not usually observed with similar materials of this kind. Overall findings indicate that MHPM is a very potential lightweight adsorbent for removal of Mn2+ from the aqueous solution because of its low density and high surface area.

scholarly journals Biochar from Agricultural by-Products for the Removal of Lead and Cadmium from Drinking Water

Water ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2933
Author(s):  
Edgar Pineda Puglla ◽  
Diana Guaya ◽  
Cristhian Tituana ◽  
Francisco Osorio ◽  
María J. García-Ruiz
Keyword(s):  
Drinking Water ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Peanut Shell ◽  
Experimental Conditions ◽  
Lower Efficiency ◽  
Lead And Cadmium ◽  
Removal Capacity ◽  
Removal Of Heavy Metals

This study reports the adsorption capacity of lead Pb2+ and cadmium Cd2+ of biochar obtained from: peanut shell (BCM), “chonta” pulp (BCH) and corn cob (BZM) calcined at 500, 600 and 700 °C, respectively. The optimal adsorbent dose, pH, maximum adsorption capacity and adsorption kinetics were evaluated. The biochar with the highest Pb2+ and Cd2+ removal capacity is obtained from the peanut shell (BCM) calcined at 565 °C in 45 min. The optimal experimental conditions were: 14 g L−1 (dose of sorbent) and pH between 5 and 7. The sorption experimental data were best fitted to the Freundlich isotherm model. High removal rates were obtained: 95.96% for Pb2+ and 99.05. for Cd2+. The BCH and BZM revealed lower efficiency of Pb2+ and Cd2+ removal than BCM biochar. The results suggest that biochar may be useful for the removal of heavy metals (Pb2+ and Cd2+) from drinking water.

Adsorption of Ammonium Sulfate Using Fabricated Zeolite from Waste Sludge of Water Treatment Plant

2011 ◽  
Vol 410 ◽  
pp. 220-223
Author(s):  
Kwannate Sombatsompop ◽  
Thun Jeensawak ◽  
Pongsachan Sonpai ◽  
Adithep Wangbooncong ◽  
Jeatana Wongwichien ◽  
...  
Keyword(s):  
Water Treatment ◽  
Adsorption Capacity ◽  
Ammonium Sulfate ◽  
Treatment Plant ◽  
Microscopic Analysis ◽  
Freundlich Isotherm ◽  
Water Treatment Plant ◽  
Maximum Adsorption Capacity ◽  
Electron Microscopic ◽  
Waste Sludge

This work studied an adsorption of ammonium sulfate (NH4)2SO4 from synthesized zeolite, with 3M NaOH at temperature of 90°C for 9 h, from waste sludge of water treatment plant. The scanning electron microscopic analysis revealed that the synthesized zeolite was observed to be cubic in shape. For adsorption capacity, the pH was varied at 4, 5, 6, 7 and 8, the contact times used were 0, 5, 10, 15, 30, 45 and 60 min, and the initial (NH4)2SO4 concentrations used ranged from 60-120 mg/L. The recommended pH and contact time were 8 and 15 min, respectively. Adsorption isotherm for synthesized zeolite was fitted to Langmuir model more effectively than Freundlich model. The K values for Langmuir and Freundlich isotherm was 0.061 and 1.751 L/mg with R2 values of 0.989 and 0.965, respectively. The maximum adsorption capacity was 9.597 mg/g obtained by the Langmuir isotherm. The work has concluded that the fabricated zeolite could successfully be used for adsorption of ammonium sulfate.

Adsorption of chromium (VI) from aqueous solutions on activated carbon

1994 ◽  
Vol 30 (9) ◽  
pp. 191-197 ◽  
Author(s):  
R. Leyva Ramos ◽  
A. Juarez Martinez ◽  
R. M. Guerrero Coronado
Keyword(s):  
Activated Carbon ◽  
Adsorption Isotherm ◽  
Adsorption Capacity ◽  
Ph Effect ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Experimental Adsorption ◽  
Ph Values ◽  
Chromium Vi ◽  
Adsorption Data

The adsorption isotherm of chromium (VI) on activated carbon was obtained in a batch adsorber. The experimental adsorption data were fitted reasonably well to the Freundlich isotherm. The effect of pH on the adsorption isotherm was investigated at pH values of 4, 6, 7, 8, 10 and 12. It was found that at pH < 6, Cr(VI) was adsorbed and reduced to Cr(III) by the catalytic action of the carbon and that at pH ≥ 12, Cr(VI) was not adsorbed on activated carbon. Maximum adsorption capacity was observed at pH 6 and the adsorption capacity was diminished about 17 times by increasing the pH from 6 to 10. The pH effect was attributed to the different complexes that Cr(VI) can form in aqueous solution. The adsorption isotherm was also affected by the temperature since the adsorption capacity was increased by raising the temperature from 25 to 40°C. It was concluded that Cr(VI) was adsorbed significantly on activated carbon at pH 6 and that the adsorption capacity was greatly dependent upon pH.

Adsorption of cadmium(II) from aqueous solution onto activated carbon

1997 ◽  
Vol 35 (7) ◽  
pp. 205-211 ◽  
Author(s):  
R. Leyva-Ramos ◽  
J. R. Rangel-Mendez ◽  
J. Mendoza-Barron ◽  
L. Fuentes-Rubio ◽  
R. M. Guerrero-Coronado
Keyword(s):  
Activated Carbon ◽  
Adsorption Isotherm ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Carbon Surface ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Ph Values ◽  
Average Percent Deviation ◽  
Initial Ph

The adsorption isotherm of cadmium on activated carbon was measured in a batch adsorber. Effects of temperature and solution pH on the adsorption isotherm were investigated by determining the adsorption isotherm at temperatures of 10, 25, and 40°C and at initial pH values from 2 to 8. Langmuir isotherm better fitted the experimental data since the average percent deviation was lower than with the Freundlich isotherm It was noticed that the amount of Cd2+ adsorbed was reduced about 3 times by increasing the temperature from 10 to 40°C. It was found that Cd2+ was not adsorbed on activated carbon at pH of 2 or lower and that Cd2+ was precipitated out as Cd(OH)2 at pH values above 9. Maximum adsorption capacity was observed at pH of 8 and the adsorption capacity was decreased about 12 times by reducing the initial pH from 8 to 3. According to the cadmium speciation diagram the predominant species below pH of 8 is Cd2+. Thus, cadmium was adsorbed on the activated carbon surface as Cd2+. It was concluded that the adsorption capacity is a strong function of pH and temperature.

Investigation of adsorption capacity of N-carboxymethyl chitosan for Pb(II) ions

2013 ◽  
Vol 68 (8) ◽  
pp. 1873-1879 ◽  
Author(s):  
Chongxia Wang ◽  
Qingping Song ◽  
Jiangang Gao
Keyword(s):  
Adsorption Capacity ◽  
Ph Value ◽  
Chloroacetic Acid ◽  
Freundlich Isotherm ◽  
Carboxymethyl Chitosan ◽  
Langmuir Model ◽  
Second Order ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
First Order

N-carboxymethyl chitosan (NCMC) was prepared by reacting chitosan (CTS) with chloroacetic acid and characterized by 13C-NMR spectroscopy to confirm that carboxymethylation occurred only in the amino groups. The adsorption properties of CTS, NCMC and O-carboxymethyl chitosan (OCMC) towards Pb(II) ions were evaluated and the order of the adsorption capacity was as follows: NCMC > OCMC > CTS. The effects of initial pH value (2.0–5.5) of the solutions and contact time (5–120 min) on adsorption of Pb(II) were investigated and the kinetic data were evaluated using the pseudo-first-order and pseudo-second-order models. Kinetics study showed that the adsorption process followed second-order kinetics rather than the first-order one. Furthermore, the experimental equilibrium data of Pb(II) on the NCMC were analyzed using the Langmuir and Freundlich isotherm models and the results indicated that the Langmuir model gave a better fit than the Freundlich equation and the maximum adsorption capacity obtained from the Langmuir model was 421.9 mg g−1.

scholarly journals Bioadsorption of lead(II) over the pulp of Acrocomia aculeata

2021 ◽  
Vol 46 (4) ◽  
pp. 38-46
Author(s):  
Alexandra Novak ◽  
F�tima Yubero ◽  
Diana Diez-P�rez-N��ez ◽  
Fernando Luis Fertonani ◽  
Brenda Gisselle Da Silva Britez ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Column Experiments ◽  
Maximum Adsorption Capacity ◽  
Batch Experiments ◽  
Adsorption Data ◽  
Acrocomia Aculeata ◽  
Scanning Electron

The adsorption of lead in aqueous solution onto Acrocomia aculeata pulp was examined. The pulp was characterized in the presence and absence of lead using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG-DTA), and scanning electron microscopy (SEM). Sulfur and oxygen bonds were responsible for adsorbing lead onto the pulp surface. The TG-DTA profile proved that adding sodium azide increases the pulp�s thermal stability until 200 �C. Adsorption data in batch and column systems were analyzed to understand the pulp adsorption compared to other biomaterials. In the batch experiments, the removal efficiency reached a maximum of 91.9% when a solution of 50 ppm of lead was placed in contact with the pulp for 30 min and fit Freundlich isotherm behavior. In the column experiments, the theoretical maximum adsorption capacity was found to be 11.97 mg g�1; more column data is needed to compare column results to other studies. Further studies to improve the pulp adsorption capacity are needed for it to be a competitive biomaterial for water treatment.

scholarly journals Self-Regeneration Hybrid Hydrogel for Bisphenol A Adsorption in Water

2021 ◽  
Author(s):  
Mingyue Piao ◽  
Hongxue Du ◽  
Yuwei Sun ◽  
Honghui Teng
Keyword(s):  
Bisphenol A ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Significant Loss ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Hybrid Hydrogel ◽  
Polyethylene Glycol Diacrylate ◽  
Glycol Diacrylate ◽  
Pseudo Second Order

Abstract Hybrid hydrogel was synthesized by immobilizing TiO2 in polyethylene glycol diacrylate (TiO2@PEGDA) as an efficient adsorbent with photocatalysis property for bisphenol A (BPA) elimination. TiO2@PEGDA exhibited spherical and rough structure with limited crystallinity and abundant functional groups. The contact angle was 61.96°, indicating that TiO2@PEGDA is hydrophilic. The swelling capacity of TiO2@PEGDA (9.0%) was decreased compared with pristine PEGDA (15.6%). Adsorption results demonstrated that the maximum adsorption capacity of TiO2@PEGDA (101.4 mg/g) for BPA was slightly higher than pristine PEGDA (97.68 mg/g). The adsorption capacity was independent with pH at pH ＜ 8.0, and decreased obviously when the value of pH was higher than 8.0. The adsorption behavior was fitted well with the pseudo-second-order kinetic and the Freundlich isotherm model. Both ΔG0 and ΔH0 were negative, indicating that BPA adsorbed on TiO2@PEGDA was an exothermic and spontaneous process. Regeneration study was performed by photocatalysis, and the adsorption capacity was 85.6% compared with the initial capacity after four cycles of illumination, indicating that TiO2@PEGDA could be recycled without significant loss of adsorption capacity. Consequently, TiO2@PEGDA can serve as an eco-friendly and promising material for efficiently adsorbing BPA with self-clean property.

scholarly journals SURFACE MODIFICATION OF CANARIUM OVATUMENGL.(PILI) SHELL AS ADSORBENT OF LEAD(Pb2+) FROM AQUEOUS SOLUTION

2021 ◽  
Author(s):  
Ernesto Jr. S. Cajucom ◽  
◽  
Lolibeth V. Figueroa ◽  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Cost Effective ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Carboxylic Groups ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Surface Modified

This study was carried out to investigate the efficiency of raw pili shell (RPS) and the surface modified pili shell using EDTA (EMPS) and oxalic acid (OMPS). A comparative study on the adsorption capacity of the adsorbents was performed against lead (Pb2+) from aqueous solution. The adsorbents were characterized by FTIR, which showed higher peak of adsorption bands of carboxylic groups on the acid modified pili shells. Scanning electron microscope orSEM was also used to describe the surface morphology of the adsorbents. The linear form of Langmuir and Freundlich models were applied to represent adsorption data. The calculated equilibrium data of Pb (II) best fitted to Langmuir compare to Freundlich isotherm model with maximum adsorption capacity (qmax) of 27.03 mg/g and 45.45 mg/g using EMPS and OMPS, respectively. Kinetic sorption models were used to determine the adsorption mechanism and the kinetic data of all the adsorbents correlated (R2=1) wellwith the pseudo second order kinetic model. Among the three adsorbents, OMPS shown higher percent removal of lead compared to RPS and EMPS. The large adsorption capacity rate indicated that chemically modified pili shell in present study has great potential to be used as a cost-effective adsorbent for the removal of lead ions from the water.

Sign in / Sign up

Export Citation Format

Share Document