scholarly journals Comparison of the Influence of 45S5 and Cu-Containing 45S5 Bioactive Glass (BG) on the Biological Properties of Novel Polyhydroxyalkanoate (PHA)/BG Composites

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2607 ◽  
Author(s):  
Katharina Schuhladen ◽  
Barbara Lukasiewicz ◽  
Pooja Basnett ◽  
Ipsita Roy ◽  
Aldo R. Boccaccini
Keyword(s):  
Tissue Engineering ◽  
Cell Biology ◽  
Inorganic Compounds ◽  
Release Kinetics ◽  
Biological Properties ◽  
Long Term Effects ◽  
Salt Leaching ◽  
Low Concentrations ◽  
A Minor ◽  
Hard Tissue Engineering

Polyhydroxyalkanoates (PHAs), due to their biodegradable and biocompatible nature and their ability to be formed in complex structures, are excellent candidates for fabricating scaffolds used in tissue engineering. By introducing inorganic compounds, such as bioactive glasses (BGs), the bioactive properties of PHAs can be further improved. In addition to their outstanding bioactivity, BGs can be additionally doped with biological ions, which in turn extend the functionality of the BG-PHA composite. Here, different PHAs were combined with 45S5 BG, which was additionally doped with copper in order to introduce antibacterial and angiogenic properties. The resulting composite was used to produce scaffolds by the salt leaching technique. By performing indirect cell biology tests using stromal cells, a dose-depending effect of the dissolution products released from the BG-PHA scaffolds could be found. In low concentrations, no toxic effect was found. Moreover, in higher concentrations, a minor reduction of cell viability combined with a major increase in VEGF release was measured. This result indicates that the fabricated composite scaffolds are suitable candidates for applications in soft and hard tissue engineering. However, more in-depth studies are necessary to fully understand the release kinetics and the resulting long-term effects of the BG-PHA composites.

Modification of Thai Silk Fibroin Scaffolds by Gelatin Conjugation for Tissue Engineering

2008 ◽  
Vol 55-57 ◽  
pp. 685-688 ◽  
Author(s):  
J. Chamchongkaset ◽  
Sorada Kanokpanont ◽  
David L. Kaplan ◽  
Siriporn Damrongsakkul
Keyword(s):  
Tissue Engineering ◽  
Bombyx Mori ◽  
Silk Fibroin ◽  
Textile Industry ◽  
Three Dimensional ◽  
Biological Properties ◽  
Salt Leaching ◽  
Biological Compatibility ◽  
Salt Crystals

Silk has been used commercially as biomedical sutures for decades. Recently silk fibroin, especially from Bombyx mori silkworm, has been explored for many tissue engineering applications such as bone and cartilage due to its impressive biological compatibility and mechanical properties. In Thailand, Thai native silkworms have been long cultivated. Distinct characteristics of cocoon Thai silk are its yellow color and coarse filament. There is more sericin in Thai silk than in other Bombyx mori silks. These characteristics provide Thai silk a unique texture for textile industry. It is therefore the aim of this study to develop three-dimensional silk fibroin-based scaffolds from Thai yellow cocoon “Nangnoi-Srisaket” of Bombyx mori silkworms using salt-leaching method. To enhance the biological properties, type A gelatin, the denature form of collagen having good biocompactibility, was used to conjugate with silk fibroin scaffolds. The pore size of salt-leached silk fibroin scaffold structure represented the size of salt crystals used (600-710µm). After gelatin conjugation, gelatin was partly formed fibers inside the pores of silk fibroin scaffolds resulting in fiber-like structure with highly interconnection. Gelatin conjugation enhanced the compressive modulus of silk fibroin scaffolds by 93%. The results on in vitro culture using mouse osteoblast-like cells (MC3T3-E1) showed that gelatin conjugation could promote the cell proliferation in silk fibroin scaffolds. Moreover, the observed morphology of cells proliferated inside the scaffold after 14 days of culture showed the larger spreading area of cells on conjugated gelatin/silk fibroin scaffolds, compared to round-shaped cells on silk fibroin scaffolds. The results implied that Thai silk fibroin looked promising to be applied in tissue engineering and gelatin conjugation on Thai silk fibroin scaffolds could enhance the biological properties of scaffolds.

Sintering and Mechanical Properties of Dense Hydroxyapatite Nanocomposites

2010 ◽  
Vol 123-125 ◽  
pp. 771-774 ◽  
Author(s):  
Chanoknan Monthien ◽  
Kanjana Silikulrat ◽  
Gobwute Rujijanagul ◽  
Tawee Tunkasiri ◽  
Sittiporn Punyanitya ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Biological Properties ◽  
Hard Tissue ◽  
Engineering Applications ◽  
Sintering Additive ◽  
Rate Controlled ◽  
Hard Tissue Engineering ◽  
Sintering Method

During recent years, there have been efforts in developing nanocrystalline bioceramics, to enhance their mechanical and biological properties for use in hard tissue engineering applications. In this work, we study the effects of some sintering additive nanopowders dopants on the properties of the sintered HA structures. Calculated quantities of silica nanopowders are incorporate as dopants into dried HA nanopowder. The mixing powders are uniaxially compacted and then sintered at 1200°C by rate-controlled sintering method in air. Compositional, microstructural, morphological and mechanical characterizations are carried out on sintered HA samples.

PDLLA/Bioglass® composites for soft-tissue and hard-tissue engineering: an in vitro cell biology assessment

Biomaterials ◽  
2004 ◽  
Vol 25 (15) ◽  
pp. 3013-3021 ◽  
Author(s):  
Sophie Verrier ◽  
Jonny J. Blaker ◽  
Veronique Maquet ◽  
Larry L. Hench ◽  
Aldo R. Boccaccini
Keyword(s):  
Tissue Engineering ◽  
Soft Tissue ◽  
Cell Biology ◽  
Hard Tissue ◽  
Hard Tissue Engineering

PLGA+HA/βTCP scaffold incorporating simvastatin: a promising biomaterial for bone tissue engineering

2020 ◽  
Author(s):  
Mariane Beatriz Sordi ◽  
Ariadne Cristiane Cabral da Cruz ◽  
Águedo Aragones ◽  
Mabel Mariela Rodríguez Cordeiro ◽  
Ricardo de Souza Magini
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Thermal Analyses ◽  
Chemical Properties ◽  
Biological Properties ◽  
Scanning Calorimetry ◽  
Evaporation Technique ◽  
Porosity Analysis ◽  
Biphasic Ceramic

The aim of this study was to synthesize, characterize, and evaluate degradation and biocompatibility of poly(lactic-co-glycolic acid) + hydroxyapatite / β-tricalcium phosphate (PLGA+HA/βTCP) scaffolds incorporating simvastatin (SIM) to verify if this biomaterial might be promising for bone tissue engineering. Samples were obtained by the solvent evaporation technique. Biphasic ceramic particles (70% HA, 30% βTCP) were added to PLGA in a ratio of 1:1. Samples with SIM received 1% (m:m) of this medication. Scaffolds were synthesized in a cylindric-shape and sterilized by ethylene oxide. For degradation analysis, samples were immersed in PBS at 37 °C under constant stirring for 7, 14, 21, and 28 days. Non-degraded samples were taken as reference. Mass variation, scanning electron microscopy, porosity analysis, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetry were performed to evaluate physico-chemical properties. Wettability and cytotoxicity tests were conducted to evaluate the biocompatibility. Microscopic images revealed the presence of macro, meso, and micropores in the polymer structure with HA/βTCP particles homogeneously dispersed. Chemical and thermal analyses presented very similar results for both PLGA+HA/βTCP and PLGA+HA/βTCP+SIM. The incorporation of simvastatin improved the hydrophilicity of scaffolds. Additionally, PLGA+HA/βTCP and PLGA+HA/βTCP+SIM scaffolds were biocompatible for osteoblasts and mesenchymal stem cells. In summary, PLGA+HA/βTCP scaffolds incorporating simvastatin presented adequate structural, chemical, thermal, and biological properties for bone tissue engineering.

Plant Extracts and their Secondary Metabolites as Modulators of Kinases

2020 ◽  
Vol 20 (12) ◽  
pp. 1093-1104 ◽  
Author(s):  
Muhammad Shoaib Ali Gill ◽  
Hammad Saleem ◽  
Nafees Ahemad
Keyword(s):  
Signal Transduction ◽  
Secondary Metabolites ◽  
Plant Extracts ◽  
Cell Biology ◽  
Kinase Inhibitor ◽  
Plant Secondary Metabolites ◽  
Biological Properties ◽  
Drug Candidate ◽  
New Chemical Entities ◽  
Natural Flora

Natural Products (NP), specifically from medicinal plants or herbs, have been extensively utilized to analyze the fundamental mechanisms of ultimate natural sciences as well as therapeutics. Isolation of secondary metabolites from these sources and their respective biological properties, along with their lower toxicities and cost-effectiveness, make them a significant research focus for drug discovery. In recent times, there has been a considerable focus on isolating new chemical entities from natural flora to meet the immense demand for kinase modulators, and also to overcome major unmet medical challenges in relation to signal transduction pathways. The signal transduction systems are amongst the foremost pathways involved in the maintenance of life and protein kinases play an imperative part in these signaling pathways. It is important to find a kinase inhibitor, as it can be used not only to study cell biology but can also be used as a drug candidate for cancer and metabolic disorders. A number of plant extracts and their isolated secondary metabolites such as flavonoids, phenolics, terpenoids, and alkaloids have exhibited activities against various kinases. In the current review, we have presented a brief overview of some important classes of plant secondary metabolites as kinase modulators. Moreover, a number of phytocompounds with kinase inhibition potential, isolated from different plant species, are also discussed.

scholarly journals Polymeric Biomaterials for the Treatment of Cardiac Post-Infarction Injuries

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1038
Author(s):  
Sonia Trombino ◽  
Federica Curcio ◽  
Roberta Cassano ◽  
Manuela Curcio ◽  
Giuseppe Cirillo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cardiac Tissue ◽  
Polymeric Nanoparticles ◽  
Three Dimensional ◽  
Cardiac Regeneration ◽  
Biological Properties ◽  
Positive Influence ◽  
Regenerative Process ◽  
Current Status ◽  
Polymeric Biomaterials

Cardiac regeneration aims to reconstruct the heart contractile mass, preventing the organ from a progressive functional deterioration, by delivering pro-regenerative cells, drugs, or growth factors to the site of injury. In recent years, scientific research focused the attention on tissue engineering for the regeneration of cardiac infarct tissue, and biomaterials able to anatomically and physiologically adapt to the heart muscle have been proposed as valuable tools for this purpose, providing the cells with the stimuli necessary to initiate a complete regenerative process. An ideal biomaterial for cardiac tissue regeneration should have a positive influence on the biomechanical, biochemical, and biological properties of tissues and cells; perfectly reflect the morphology and functionality of the native myocardium; and be mechanically stable, with a suitable thickness. Among others, engineered hydrogels, three-dimensional polymeric systems made from synthetic and natural biomaterials, have attracted much interest for cardiac post-infarction therapy. In addition, biocompatible nanosystems, and polymeric nanoparticles in particular, have been explored in preclinical studies as drug delivery and tissue engineering platforms for the treatment of cardiovascular diseases. This review focused on the most employed natural and synthetic biomaterials in cardiac regeneration, paying particular attention to the contribution of Italian research groups in this field, the fabrication techniques, and the current status of the clinical trials.

scholarly journals Bioactive potential of natural biomaterials: identification, retention and assessment of biological properties

2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Kieran Joyce ◽  
Georgina Targa Fabra ◽  
Yagmur Bozkurt ◽  
Abhay Pandit
Keyword(s):  
Tissue Engineering ◽  
Therapeutic Potential ◽  
Biological Properties ◽  
Biological Assessment ◽  
Cross Linking ◽  
Natural Polymers ◽  
Drug Delivery Device ◽  
Biomedical Device ◽  
Wide Range ◽  
Bioactive Potential

AbstractBiomaterials have had an increasingly important role in recent decades, in biomedical device design and the development of tissue engineering solutions for cell delivery, drug delivery, device integration, tissue replacement, and more. There is an increasing trend in tissue engineering to use natural substrates, such as macromolecules native to plants and animals to improve the biocompatibility and biodegradability of delivered materials. At the same time, these materials have favourable mechanical properties and often considered to be biologically inert. More importantly, these macromolecules possess innate functions and properties due to their unique chemical composition and structure, which increase their bioactivity and therapeutic potential in a wide range of applications. While much focus has been on integrating these materials into these devices via a spectrum of cross-linking mechanisms, little attention is drawn to residual bioactivity that is often hampered during isolation, purification, and production processes. Herein, we discuss methods of initial material characterisation to determine innate bioactivity, means of material processing including cross-linking, decellularisation, and purification techniques and finally, a biological assessment of retained bioactivity of a final product. This review aims to address considerations for biomaterials design from natural polymers, through the optimisation and preservation of bioactive components that maximise the inherent bioactive potency of the substrate to promote tissue regeneration.

scholarly journals Electrospun Nanofibrous Membranes for Tissue Engineering and Cell Growth

2021 ◽  
Vol 11 (15) ◽  
pp. 6929
Author(s):  
Ewin Tanzli ◽  
Andrea Ehrmann
Keyword(s):  
Tissue Engineering ◽  
Cell Growth ◽  
Polymer Blends ◽  
Mammalian Cells ◽  
Biological Properties ◽  
Specific Substrate ◽  
Electrospun Nanofiber ◽  
Materials Used ◽  
Nanofiber Mats ◽  
Surface Morphologies

In biotechnology, the field of cell cultivation is highly relevant. Cultivated cells can be used, for example, for the development of biopharmaceuticals and in tissue engineering. Commonly, mammalian cells are grown in bioreactors, T-flasks, well plates, etc., without a specific substrate. Nanofibrous mats, however, have been reported to promote cell growth, adhesion, and proliferation. Here, we give an overview of the different attempts at cultivating mammalian cells on electrospun nanofiber mats for biotechnological and biomedical purposes. Starting with a brief overview of the different electrospinning methods, resulting in random or defined fiber orientations in the nanofiber mats, we describe the typical materials used in cell growth applications in biotechnology and tissue engineering. The influence of using different surface morphologies and polymers or polymer blends on the possible application of such nanofiber mats for tissue engineering and other biotechnological applications is discussed. Polymer blends, in particular, can often be used to reach the required combination of mechanical and biological properties, making such nanofiber mats highly suitable for tissue engineering and other biotechnological or biomedical cell growth applications.

Tissue engineering in periodontics- A demystifing review

2021 ◽  
pp. 1-5
Author(s):  
Shivani Sachdeva ◽  
Harish Saluja ◽  
Amit Mani ◽  
M.B. Phadnaik
Keyword(s):  
Tissue Engineering ◽  
Tissue Regeneration ◽  
Cell Biology ◽  
Alveolar Bone ◽  
Complete Recovery ◽  
Medical Sciences ◽  
Alternative Approach ◽  
Periodontal Tissue Regeneration ◽  
Novel Concept ◽  
And Function

INTRODUCTION: Novel concept known as tissue engineering is for the betterment of human. The use of much advanced molecular science and cell biology in processing the tissues to regenerate even after the loss of inborn tendency of pluripotent cells to multiply is possible by this new therapy. CONTENT: Periodontal tissue regeneration in both height and function is attributed to a complete recovery of the periodontal structures, that is, the formation of alveolar bone, a new connective attachment through collagen fibers as well as functionally oriented on the newly formed cementum is regeneration. Cell based therapies including tissue regeneration is an alternative approach for the regeneration of tissues damaged by disease or trauma. SUMMARY: Though tissue engineering requires the fundamentals of all the three keys namely genomics, proteomics and biometrics to give the solutions to biological problems appearing in dentistry as well as medical sciences.

Sign in / Sign up

Export Citation Format

Share Document