scholarly journals Selection of ion sensor operating parameters in quasi-static conditions

2019 ◽  
Vol 179 (4) ◽  
pp. 254-258
Author(s):  
Łukasz FIEDKIEWICZ ◽  
Ireneusz PIELECHA
Keyword(s):  
Linear Relationship ◽  
Effect Of Temperature ◽  
Dynamic Factor ◽  
Geometrical Parameters ◽  
Continuous Assessment ◽  
Ionization Current ◽  
Ionization Signal ◽  
Spark Plug ◽  
Static Conditions ◽  
The Impact

Evaluating combustion quality using sensors that allow continuous assessment of the process is one of the modern methods of engine sensory diagnostics. The proper calibration of such systems is a task that requires many studies to determine the conditions and quantities affecting the process. The analysis of significance of quantities related to the ionization signal was carried out in the article. The magnitude of the voltage generating the electric field, the type of spark plug used, the distance of the spark plug electrodes and the dynamic factor – spark plug operating temperature – were all tested. The tests were carried out using a CNG burner (with an excess air ratio of lambda = 1) and four spark plugs. As a result of the ionization signal research, the following relationships were obtained: regarding the impact of the sensor position on the amount of generated voltage (the smaller the distance the greater the value of the signal), the effect of temperature on the sensor resistance (non-linear relationship: increase in temperature decreases resistance, with R2 = 0.9997) effect of system voltage on the ionization signal (linear relationship: voltage increase increases the ionization current signal with a determination coefficient of R2 = 0.9803). In addition, it was found that using an iridium electrode candle had the best effects on the ionization current, regardless of the electrode’s geometrical parameters.

THEORETICAL STUDY OF THE EFFECT OF GEOMETRICAL PARAMETERS AND LOCATION OF ROTOR IMPACT ELEMENTS OF AN IMPACT-CENTRIFUGAL GRINDER ON SPEED AND ANGLES OF CRUSHED PARTICLES FLIGHT

2020 ◽  
Keyword(s):  
Granulometric Composition ◽  
Theoretical Study ◽  
Process Efficiency ◽  
Geometrical Parameters ◽  
Grinding Process ◽  
Main Work ◽  
Impact Element ◽  
The Impact ◽  
Positive Effect ◽  
Efficiency Indicators

One of efficiency indicators of grain grinders is grain granulometric composition. The basis of mixed fodder is crushed grain, the particles of which must have a leveled granulometric composition for subsequent mixing and obtaining a high-quality feed mixture. In agricultural production, hammer crushers are widely used, in which the destruction of grain occurs due to the impact of a hinged hammer. The main disadvantage of these crushers is that not the entire surface of the hammers is involved in grinding, thus reduces grinding process efficiency. A slightly different principle of material destruction is laid down in the basis of the proposed design of the shock-centrifugal grinder. Main work is performed by flat impact elements located on the rotor, which serve to accelerate crushed particles with subsequent impact of them on the bump elements. An important step in the design of new constructions of shock-centrifugal grinders is to determine size and location of the impact elements on the rotor, without which the grinding process is not possible. In the calculation method presented, the dependencies for determining the velocities and angles of a single particle flight from the surface of a flat impact element for its specified dimensions are proposed. Two variants of an impact element location on the rotor are considered and analyzed: radial and at an angle in the direction of rotor rotation. As a result of research carried out, it is noted that in the case of inclined position of an impact element on the rotor an increase in flight speed and flight angles change in crushed particles, which gives the opportunity to have a positive effect on grinding process.

scholarly journals Effect of temperature, CO2 and O2 on motility and mobility of Anisakidae larvae

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Aiyan Guan ◽  
Inge Van Damme ◽  
Frank Devlieghere ◽  
Sarah Gabriël
Keyword(s):  
Enzymatic Digestion ◽  
Infected Fish ◽  
Effect Of Temperature ◽  
Video Recordings ◽  
Different Temperatures ◽  
Semi Solid ◽  
Zoonotic Parasites ◽  
The Impact ◽  
Phosphate Buffered Saline

AbstractAnisakidae, marine nematodes, are underrecognized fish-borne zoonotic parasites. Studies on factors that could trigger parasites to actively migrate out of the fish are very limited. The objective of this study was to assess the impact of different environmental conditions (temperature, CO2 and O2) on larval motility (in situ movement) and mobility (migration) in vitro. Larvae were collected by candling or enzymatic digestion from infected fish, identified morphologically and confirmed molecularly. Individual larvae were transferred to a semi-solid Phosphate Buffered Saline agar, and subjected to different temperatures (6 ℃, 12 ℃, 22 ℃, 37 ℃) at air conditions. Moreover, different combinations of CO2 and O2 with N2 as filler were tested, at both 6 °C and 12 °C. Video recordings of larvae were translated into scores for larval motility and mobility. Results showed that temperature had significant influence on larval movements, with the highest motility and mobility observed at 22 ℃ for Anisakis spp. larvae and 37 ℃ for Pseudoterranova spp. larvae. During the first 10 min, the median migration of Anisakis spp. larvae was 10 cm at 22 ℃, and the median migration of Pseudoterranova spp. larvae was 3 cm at 37 ℃. Larval mobility was not significantly different under the different CO2 or O2 conditions at 6 °C and 12 ℃. It was concluded that temperature significantly facilitated larval movement with the optimum temperature being different for Anisakis spp. and Pseudoterranova spp., while CO2 and O2 did not on the short term. This should be further validated in parasite-infected/spiked fish fillets.

scholarly journals Effect of extreme cold temperatures on quasi-static indentation and impact behavior of woven carbon fiber epoxy composite sandwich panels with nomex honeycomb core

2021 ◽  
pp. 109963622199387
Author(s):  
Mathilde Jean-St-Laurent ◽  
Marie-Laure Dano ◽  
Marie-Josée Potvin
Keyword(s):  
Epoxy Composite ◽  
Impact Behavior ◽  
Effect Of Temperature ◽  
Cold Temperatures ◽  
Composite Sandwich Panels ◽  
Composite Sandwich ◽  
Static Indentation ◽  
Nomex Honeycomb ◽  
Extreme Cold ◽  
The Impact

The effect of extreme cold temperatures on the quasi-static indentation and the low velocity impact behavior of woven carbon/epoxy composite sandwich panels with Nomex honeycomb core was investigated. Impact tests were performed at room temperature, –70°C, and –150°C. Two sizes of hemispherical impactor were used combined to three different impactor masses. All the impact tests were performed at the same initial impact velocity. The effect of temperature on the impact behavior is investigated by studying the load history, load-displacement curves and transmitted energy as a function of time curves. Impact damage induced at various temperatures was studied using different non-destructive and destructive techniques. Globally, more damages are induced with impact temperature decreasing. The results also show that the effect of temperature on the impact behavior is function of the impactor size.

scholarly journals The modification effect of temperature on the relationship between air pollutants and daily incidence of influenza in Ningbo, China

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Rui Zhang ◽  
Yujie Meng ◽  
Hejia Song ◽  
Ran Niu ◽  
Yu Wang ◽  
...  
Keyword(s):  
Air Pollution ◽  
High Temperature ◽  
Air Pollutants ◽  
Meteorological Data ◽  
Effect Of Temperature ◽  
Distributed Lag ◽  
Modification Effect ◽  
Incidence Risk ◽  
The Impact ◽  
The Relationship

Abstract Background Although exposure to air pollution has been linked to many health issues, few studies have quantified the modification effect of temperature on the relationship between air pollutants and daily incidence of influenza in Ningbo, China. Methods The data of daily incidence of influenza and the relevant meteorological data and air pollution data in Ningbo from 2014 to 2017 were retrieved. Low, medium and high temperature layers were stratified by the daily mean temperature with 25th and 75th percentiles. The potential modification effect of temperature on the relationship between air pollutants and daily incidence of influenza in Ningbo was investigated through analyzing the effects of air pollutants stratified by temperature stratum using distributed lag non-linear model (DLNM). Stratified analysis by sex and age were also conducted. Results Overall, a 10 μg/m3 increment of O3, PM2.5, PM10 and NO2 could increase the incidence risk of influenza with the cumulative relative risk of 1.028 (95% CI 1.007, 1.050), 1.061 (95% CI 1.004, 1.122), 1.043 (95% CI 1.003, 1.085), and 1.118 (95% CI 1.028, 1.216), respectively. Male and aged 7–17 years were more sensitive to air pollutants. Through the temperature stratification analysis, we found that temperature could modify the impacts of air pollution on daily incidence of influenza with high temperature exacerbating the impact of air pollutants. At high temperature layer, male and the groups aged 0–6 years and 18–64 years were more sensitive to air pollution. Conclusion Temperature modified the relationship between air pollution and daily incidence of influenza and high temperature would exacerbate the effects of air pollutants in Ningbo.

Impaired Platelet Function in Sept8-Deficient Mice In Vitro

2020 ◽  
Author(s):  
Kerstin Jurk ◽  
Katharina Neubauer ◽  
Victoria Petermann ◽  
Elena Kumm ◽  
Barbara Zieger
Keyword(s):  
Platelet Function ◽  
Thrombin Generation ◽  
Human Platelets ◽  
Platelet Surface ◽  
Integrin Αiibβ3 ◽  
Glycoprotein Vi ◽  
Fibrinogen Receptor ◽  
Static Conditions ◽  
The Impact

AbstractSeptins (Septs) are a widely expressed protein family of 13 mammalian members, recognized as a unique component of the cytoskeleton. In human platelets, we previously described that SEPT4 and SEPT8 are localized surrounding α-granules and move to the platelet surface after activation, indicating a possible role in platelet physiology. In this study, we investigated the impact of Sept8 on platelet function in vitro using Sept8-deficient mouse platelets. Deletion of Sept8 in mouse platelets caused a pronounced defect in activation of the fibrinogen receptor integrin αIIbβ3, α-granule exocytosis, and aggregation, especially in response to the glycoprotein VI agonist convulxin. In contrast, δ-granule and lysosome exocytosis of Sept8-deficient platelets was comparable to wild-type platelets. Sept8-deficient platelet binding to immobilized fibrinogen under static conditions was diminished and spreading delayed. The procoagulant activity of Sept8-deficient platelets was reduced in response to convulxin as determined by lactadherin binding. Also thrombin generation was decreased relative to controls. Thus, Sept8 is required for efficient integrin αIIbβ3 activation, α-granule release, platelet aggregation, and contributes to platelet-dependent thrombin generation. These results revealed Sept8 as a modulator of distinct platelet functions involved in primary and secondary hemostatic processes.

scholarly journals Spatio-Temporal Variation Characteristics of Snow Depth and Snow Cover Days over the Tibetan Plateau

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 307
Author(s):  
Chi Zhang ◽  
Naixia Mou ◽  
Jiqiang Niu ◽  
Lingxian Zhang ◽  
Feng Liu
Keyword(s):  
Tibetan Plateau ◽  
Snow Cover ◽  
Snow Depth ◽  
Feedback Effect ◽  
Effect Of Temperature ◽  
The Tibetan Plateau ◽  
Reanalysis Dataset ◽  
Spatio Temporal ◽  
The Impact ◽  
Main Factor

Changes in snow cover over the Tibetan Plateau (TP) have a significant impact on agriculture, hydrology, and ecological environment of surrounding areas. This study investigates the spatio-temporal pattern of snow depth (SD) and snow cover days (SCD), as well as the impact of temperature and precipitation on snow cover over TP from 1979 to 2018 by using the ERA5 reanalysis dataset, and uses the Mann–Kendall test for significance. The results indicate that (1) the average annual SD and SCD in the southern and western edge areas of TP are relatively high, reaching 10 cm and 120 d or more, respectively. (2) In the past 40 years, SD (s = 0.04 cm decade−1, p = 0.81) and SCD (s = −2.3 d decade−1, p = 0.10) over TP did not change significantly. (3) The positive feedback effect of precipitation is the main factor affecting SD, while the negative feedback effect of temperature is the main factor affecting SCD. This study improves the understanding of snow cover change and is conducive to the further study of climate change on TP.

scholarly journals Spatial distribution patterns of soil total phosphorus influenced by climatic factors in China’s forest ecosystems

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jie Zhu ◽  
Anchi Wu ◽  
Guoyi Zhou
Keyword(s):  
Spatial Distribution ◽  
Forest Ecosystems ◽  
Climatic Factors ◽  
Critical Role ◽  
Effect Of Temperature ◽  
P Concentration ◽  
Single Effect ◽  
The Impact ◽  
P Distribution ◽  
Total P

AbstractPhosphorus (P) is an important element in terrestrial ecosystems and plays a critical role in soil quality and ecosystem productivity. Soil total P distributions have undergone large spatial changes as a result of centuries of climate change. It is necessary to study the characteristics of the horizontal and vertical distributions of soil total P and its influencing factors. In particular, the influence of climatic factors on the spatial distribution of soil total P in China’s forest ecosystems remain relatively unknown. Here, we conducted an intensive field investigation in different forest ecosystems in China to assess the effect of climatic factors on soil total P concentration and distribution. The results showed that soil total P concentration significantly decreased with increasing soil depth. The spatial distribution of soil total P increased with increasing latitude and elevation gradient but decreased with increasing longitude gradient. Random forest models and linear regression analyses showed that the explanation rate of bioclimatic factors and their relationship with soil total P concentration gradually decreased with increasing soil depths. Variance partitioning analysis demonstrated that the most important factor affecting soil total P distribution was the combined effect of temperature and precipitation factor, and the single effect of temperature factors had a higher explanation rate compare with the single effect of precipitation factors. This work provides a new farmework for the geographic distribution pattern of soil total P and the impact of climate variability on P distribution in forest ecosystems.

scholarly journals Evaluating medical education regulation changes in Brazil: workforce impact

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Alexandre Medeiros Figueiredo ◽  
Danette Waller McKinley ◽  
Adriano Massuda ◽  
George Dantas Azevedo
Keyword(s):  
Medical Education ◽  
Public Schools ◽  
Low Income ◽  
School Enrollment ◽  
Health Coverage ◽  
Continuous Assessment ◽  
Middle Income ◽  
Unified Health System ◽  
Medical Undergraduate ◽  
The Impact

Abstract Background Shortages and inequitable distribution of physicians is an obstacle to move towards Universal Health Coverage, especially in low-income and middle-income countries. In Brazil, expansion of medical school enrollment, curricula changes and recruitment programs were established to increase the number of physicians in underserved areas. This study seeks to analyze the impact of these measures in reduce inequities in access to medical education and physicians’ distribution. Methods This is an observational study that analyzes changes in the number of undergraduate medical places and number of physicians per inhabitants in different areas in Brazil between the years 2010 and 2018. Data regarding the number of undergraduate medical places, number and the practice location of physicians were obtained in public databases. Municipalities with less than 20,000 inhabitants were considered underserved areas. Data regarding access to antenatal visits were analyzed as a proxy for impact in access to healthcare. Results From 2010 to 2018, 19,519 new medical undergraduate places were created which represents an increase of 120.2%. The increase in the number of physicians engaged in the workforce throughout the period was 113,702 physicians, 74,771 of these physicians in the Unified Health System. The greatest increase in the physicians per 1000 inhabitants ratio in the municipalities with the smallest population, the lowest Gross Domestic Product per capita and in those located in the states with the lowest concentration of physicians occurred in the 2013–2015 period. Increase in physician supply improved access to antenatal care. Conclusions There was an expansion in the number of undergraduate medical places and medical workforce in all groups of municipalities assessed in Brazil. Medical undergraduate places expansion in the federal public schools was more efficient to reduce regional inequities in access to medical education than private sector expansion. The recruitment component of More Doctors for Brazil Program demonstrated effectiveness to increase the number of physicians in underserved areas. Our results indicate the importance of public policies to face inequities in access to medical education and physician shortages and the necessity of continuous assessment during the period of implementation, especially in the context of political and economic changes.

Influence of nozzle exit geometrical parameters on supersonic jet decay

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Prasanta Kumar Mohanta ◽  
B. T. N. Sridhar ◽  
R. K. Mishra
Keyword(s):  
Aspect Ratio ◽  
Nozzle Exit ◽  
Ambient Air ◽  
Schlieren Image ◽  
Geometrical Parameters ◽  
Image Study ◽  
Aspect Ratios ◽  
Core Length ◽  
Supersonic Core Length ◽  
The Impact

Abstract Experiments and simulations were carried on C-D nozzles with four different exit geometry aspect ratios to investigate the impact of supersonic decay characteristics. Rectangular and elliptical exit geometries were considered for the study with various aspect ratios. Numerical simulations and Schlieren image study were studied and found the agreeable logical physics of decay and spread characteristics. The supersonic core decay was found to be of different length for different exit geometry aspect ratio, though the throat to exit area ratio was kept constant to maintain the same exit Mach number. The impact of nozzle exit aspect ratio geometry was responsible to enhance the mixing of primary flow with ambient air, without requiring a secondary method to increase the mixing characteristics. The higher aspect ratio resulted in better mixing when compared to lower aspect ratio exit geometry, which led to reduction in supersonic core length. The behavior of core length reduction gives the identical signature for both under-expanded and over-expanded cases. The results revealed that higher aspect ratio of the exit geometry produced smaller supersonic core length. The aspect ratio of cross section in divergent section of the nozzle was maintained constant from throat to exit to reduce flow losses.

scholarly journals Container Throughput Forecasting Using Dynamic Factor Analysis and ARIMAX Model

2017 ◽  
Vol 29 (5) ◽  
pp. 529-542 ◽  
Author(s):  
Marko Intihar ◽  
Tomaž Kramberger ◽  
Dejan Dragan
Keyword(s):  
Factor Analysis ◽  
Goodness Of Fit ◽  
Moving Average ◽  
Real Data ◽  
Information Criteria ◽  
Dynamic Factor Analysis ◽  
Forecasting Model ◽  
Dynamic Factor ◽  
Macroeconomic Indicators ◽  
The Impact

The paper examines the impact of integration of macroeconomic indicators on the accuracy of container throughput time series forecasting model. For this purpose, a Dynamic factor analysis and AutoRegressive Integrated Moving-Average model with eXogenous inputs (ARIMAX) are used. Both methodologies are integrated into a novel four-stage heuristic procedure. Firstly, dynamic factors are extracted from external macroeconomic indicators influencing the observed throughput. Secondly, the family of ARIMAX models of different orders is generated based on the derived factors. In the third stage, the diagnostic and goodness-of-fit testing is applied, which includes statistical criteria such as fit performance, information criteria, and parsimony. Finally, the best model is heuristically selected and tested on the real data of the Port of Koper. The results show that by applying macroeconomic indicators into the forecasting model, more accurate future throughput forecasts can be achieved. The model is also used to produce future forecasts for the next four years indicating a more oscillatory behaviour in (2018-2020). Hence, care must be taken concerning any bigger investment decisions initiated from the management side. It is believed that the proposed model might be a useful reinforcement of the existing forecasting module in the observed port.

Sign in / Sign up

Export Citation Format

Share Document