scholarly journals APPLICATION OF DATA FROM THE CONE CALORIMETER FOR ANALYSES OF THE IMPACT OF A FLAME RETARDANT APPLIED ON POLYMER MATERIAL SUBJECTED TO COMBUSTION ON CHANGES IN SMOKE LOGGING WITHIN A CONFINED SPACE

2014 ◽  
Vol 5 (4) ◽  
pp. 167-174
Author(s):  
Marek Konecki ◽  
Marzena Półka ◽  
Norbert Tuśnio ◽  
Mečislavas Griškevičius

The paper makes an analysis of the impact of flame retardants on parameters of thermal energy emission and smoke from polymer materials specified with the use of a cone calorimeter and on parameters of the smoke logging zones in a model scheme of compartments. Polymer construction materials modified and without modification by flame retardants, such as oak wood, epoxy resins based on Epidian 5 as well as such equipping materials as polyurethane foams were selected as research materials. On the basis of the conducted analyses, a positive correlation was achieved between the parameters obtained with the use of a cone calorimeter and parameters of smoke logging based on bi-zonal modelling for a simple model scheme of two compartments.

2011 ◽  
Vol 197-198 ◽  
pp. 1346-1349 ◽  
Author(s):  
Fa Chao Wu

Bis(2,6,7-trioxa-l-phosphabicyclo[2.2.2]octane-4-methanol) melaminium salt (Melabis) and microcapsules of Melabis with melamine resin shell as flame retardants (FR), respectively, were synthesized. Their structures were characterized by NMR, IR, SEM, TG and element analysis. 20% weight of microcapsules was doped into epoxy resins (EP) to get 28.5 % of LOI and UL 94 V-0. The heat and smoke release of EP containing microcapsules was valued by cone calorimeter.


Toxics ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 99
Author(s):  
Maria Angela Butturi ◽  
Simona Marinelli ◽  
Rita Gamberini ◽  
Bianca Rimini

Plastic materials account for about 20% of waste electrical and electronic equipment (WEEE). The recycling of this plastic fraction is a complex issue, heavily conditioned by the content of harmful additives, such as brominated flame retardants. Thus, the management and reprocessing of WEEE plastics pose environmental and human health concerns, mainly in developing countries, where informal recycling and disposal are practiced. The objective of this study was twofold. Firstly, it aimed to investigate some of the available options described in the literature for the re-use of WEEE plastic scraps in construction materials, a promising recycling route in the developing countries. Moreover, it presents an evaluation of the impact of these available end-of-life scenarios on the environment by means of the life cycle assessment (LCA) approach. In order to consider worker health and human and ecological risks, the LCA analysis focuses on ecotoxicity more than on climate change. The LCA evaluation confirmed that the plastic re-use in the construction sector has a lower toxicity impact on the environment and human health than common landfilling and incineration practices. It also shows that the unregulated handling and dismantling activities, as well as the re-use practices, contribute significantly to the impact of WEEE plastic treatments.


Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1021
Author(s):  
Henri Vahabi ◽  
Maryam Jouyandeh ◽  
Thibault Parpaite ◽  
Mohammad Reza Saeb ◽  
Seeram Ramakrishna

Development of green flame retardants has become a core part of the attention of material scientists and technologists in a paradigm shift from general purpose to specific sustainable products. This work is the first report on the use of coffee biowastes as sustainable flame retardants for epoxy, as a typical highly flammable polymer. We used spent coffee grounds (SCG) as well as SCG chemically modified with phosphorus (P-SCG) to develop a sustainable highly efficient flame retardant. A considerable reduction in the peak of heat release rate (pHRR) by 40% was observed in the pyrolysis combustion flow calorimeter analysis (PCFC), which proved the merit of the used coffee biowastes for being used as sustainable flame retardants for polymers. This work would open new opportunities to investigate the impact of other sorts of coffee wastes rather than SCG from different sectors of the coffee industry on polymers of different family.


2014 ◽  
Vol 989-994 ◽  
pp. 511-514
Author(s):  
Ying Jie Chen ◽  
Liu Zhi Peng ◽  
Pei Gang Dai ◽  
Dan Lin Li ◽  
Li Jie Wu

Different flexible polyurethane foams (FPUF) were prepared with one step method. Combustion performance of them were tested throughout oxygen index (OI), cone calorimeter (Cone). The results showed that flame performance prepared by 10% wt brominated flame retardants, and 10% wt MPOP was better. In irradiance 30kW/m2, sample thickness 50mm conditions, heat release rate peak seprarately decreased to 284.0 kW /m2 and 270.8 kW /m2. In the coordination of N and P, the FPUF adding MPOP showed ideal flame retardancy .It is worth noting that when the content of MPOP exceeds 10%, the physical performance decreased rapidly with the increases of brittleness and hardness.


2012 ◽  
Vol 560-561 ◽  
pp. 569-573 ◽  
Author(s):  
Ming Gao ◽  
Chun Feng Sun

Bisphenol A bis( diphenyl phosphate) oligomer (BDP) as flame retardants (FR) was synthesized, whose structure was characterized by IR. 30% weight BDP was doped into epoxy resins (EP) to get 26.2 % of LOI and UL 94 V-0. The degradation behavior of EP containing BDP was studied by TG, SEM and cone calorimeter. In the thermal degradation of EP containing BDP, the initial decomposition temperature, Tm and heat release and smoke production are decreased while Rmax, char yields, and inherent thermal stability are increased. Surface of the char is dense and compact, which can isolate the transfer of mass and heat between the materials and the flame to protect the unburned materials.


Author(s):  
Lily N Edwards-Callaway ◽  
M Caitlin Cramer ◽  
Caitlin N Cadaret ◽  
Elizabeth J Bigler ◽  
Terry E Engle ◽  
...  

ABSTRACT Shade is a mechanism to reduce heat load providing cattle with an environment supportive of their welfare needs. Although heat stress has been extensively reviewed, researched, and addressed in dairy production systems, it has not been investigated in the same manner in the beef cattle supply chain. Like all animals, beef cattle are susceptible to heat stress if they are unable to dissipate heat during times of elevated ambient temperatures. There are many factors that impact heat stress susceptibility in beef cattle throughout the different supply chain sectors, many of which relate to the production system, i.e. availability of shade, microclimate of environment, and nutrition management. The results from studies evaluating the effects of shade on production and welfare are difficult to compare due to variation in structural design, construction materials used, height, shape, and area of shade provided. Additionally, depending on operation location, shade may or may not be beneficial during all times of the year, which can influence the decision to make shade a permanent part of management systems. Shade has been shown to lessen the physiologic response of cattle to heat stress. Shaded cattle exhibit lower respiration rates, body temperatures, and panting scores compared to un-shaded cattle in weather that increases the risk of heat stress. Results from studies investigating the provision of shade indicate that cattle seek shade in hot weather. The impact of shade on behavioral patterns is inconsistent in the current body of research, some studies indicating shade provision impacts behavior and other studies reporting no difference between shaded and un-shaded groups. Analysis of performance and carcass characteristics across feedlot studies demonstrated that shaded cattle had increased ADG, improved feed efficiency, HCW, and dressing percentage when compared to cattle without shade. Despite the documented benefits of shade, current industry statistics, although severely limited in scope, indicate low shade implementation rates in feedlots and data in other supply chain sectors do not exist. Industry guidelines and third party on-farm certification programs articulate the critical need for protection from extreme weather but are not consistent in providing specific recommendations and requirements. Future efforts should include: updated economic analyses of cost versus benefit of shade implementation, exploration of producer perspectives and needs relative to shade, consideration of shade impacts in the cow-calf and slaughter plant segments of the supply chain, and integration of indicators of affective (mental) state and preference in research studies to enhance the holistic assessment of cattle welfare.


Author(s):  
Istebreq A. Saeedi ◽  
Sunny Chaudhary ◽  
Thomas Andritsch ◽  
Alun S. Vaughan

AbstractReactive molecular additives have often been employed to tailor the mechanical properties of epoxy resins. In addition, several studies have reported improved electrical properties in such systems, where the network architecture and included function groups have been modified through the use of so-called functional network modifier (FNM) molecules. The study reported here set out to investigate the effect of a glycidyl polyhedral oligomeric silsesquioxane (GPOSS) FNM on the cross-linking reactions, glass transition, breakdown strength and dielectric properties of an amine-cured epoxy resin system. Since many previous studies have considered POSS to act as an inorganic filler, a key aim was to consider the impact of GPOSS addition on the stoichiometry of curing. Fourier transform infrared spectroscopy revealed significant changes in the cross-linking reactions that occur if appropriate stoichiometric compensation is not made for the additional epoxide groups present on the GPOSS. These changes, in concert with the direct effect of the GPOSS itself, influence the glass transition temperature, dielectric breakdown behaviour and dielectric response of the system. Specifically, the work shows that the inclusion of GPOSS can result in beneficial changes in electrical properties, but that these gains are easily lost if consequential changes in the matrix polymer are not appropriately counteracted. Nevertheless, if the system is appropriately optimized, materials with pronounced improvements in technologically important characteristics can be designed.


Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 82
Author(s):  
Salmabanu Luhar ◽  
Demetris Nicolaides ◽  
Ismail Luhar

Even though, an innovative inorganic family of geopolymer concretes are eye-catching potential building materials, it is quite essential to comprehend the fire and thermal resistance of these structural materials at a very high temperature and also when experiencing fire with a view to make certain not only the safety and security of lives and properties but also to establish them as more sustainable edifice materials for future. The experimental and field observations of degree of cracking, spalling and loss of strength within the geopolymer concretes subsequent to exposure at elevated temperature and incidences of occurrences of disastrous fires extend an indication of their resistance against such severely catastrophic conditions. The impact of heat and fire on mechanical attributes viz., mechanical-compressive strength, flexural behavior, elastic modulus; durability—thermal shrinkage; chemical stability; the impact of thermal creep on compressive strength; and microstructure properties—XRD, FTIR, NMR, SEM as well as physico-chemical modifications of geopolymer composites subsequent to their exposures at elevated temperatures is reviewed in depth. The present scientific state-of-the-art review manuscript aimed to assess the fire and thermal resistance of geopolymer concrete along with its thermo-chemistry at a towering temperature in order to introduce this novel, most modern, user and eco-benign construction materials as potentially promising, sustainable, durable, thermal and fire-resistant building materials promoting their optimal and apposite applications for construction and infrastructure industries.


Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2205
Author(s):  
Qian Li ◽  
Yujie Li ◽  
Yifan Chen ◽  
Qiang Wu ◽  
Siqun Wang

A novel liquid phosphorous-containing flame retardant anhydride (LPFA) with low viscosity was synthesized from 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and methyl tetrahydrophthalic anhydride (MeTHPA) and further cured with bisphenol-A epoxy resin E-51 for the preparation of the flame retardant epoxy resins. Both Fourier transform infrared spectroscopy (FT-IR), mass spectrometry (MS) and nuclear magnetic resonance (NMR) measurements revealed the successful incorporation of DOPO on the molecular chains of MeTHPA through chemical reaction. The oxygen index analysis showed that the LPFA-cured epoxy resin exhibited excellent flame retardant performance, and the corresponding limiting oxygen index (LOI) value could reach 31.2%. The UL-94V-0 rating was achieved for the flame retardant epoxy resin with the phosphorus content of 2.7%. With the addition of LPFA, the impact strength of the cured epoxy resins remained almost unchanged, but the flexural strength gradually increased. Meanwhile, all the epoxy resins showed good thermal stability. The glass transition temperature (Tg) and thermal decomposition temperature (Td) of epoxy resin cured by LPFA decreased slightly compared with that of MeTHPA-cured epoxy resin. Based on such excellent flame retardancy, low viscosity at room temperature and ease of use, LPFA showed potential as an appropriate curing agent in the field of electrical insulation materials.


Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3979
Author(s):  
Anna Strąkowska ◽  
Sylwia Członka ◽  
Karolina Miedzińska ◽  
Krzysztof Strzelec

The subject of the research was the production of silsesquioxane modified rigid polyurethane (PUR) foams (POSS-Cl) with chlorine functional groups (chlorobenzyl, chloropropyl, chlorobenzylethyl) characterized by reduced flammability. The foams were prepared in a one-step additive polymerization reaction of isocyanates with polyols, and the POSS modifier was added to the reaction system in an amount of 2 wt.% polyol. The influence of POSS was analyzed by performing a series of tests, such as determination of the kinetics of foam growth, determination of apparent density, and structure analysis. Compressive strength, three-point bending strength, hardness, and shape stability at reduced and elevated temperatures were tested, and the hydrophobicity of the surface was determined. The most important measurement was the determination of the thermal stability (TGA) and the flammability of the modified systems using a cone calorimeter. The obtained results, after comparing with the results for unmodified foam, showed a large influence of POSS modifiers on the functional properties, especially thermal and fire-retardant, of the obtained PUR-POSS-Cl systems.


Sign in / Sign up

Export Citation Format

Share Document