A Fast Method for Analyzing the Effect of Mask Error on Photolithography Pattern Quality

2011 ◽  
Vol 291-294 ◽  
pp. 3097-3102
Author(s):  
Mu Jun Li ◽  
Hui Chun Ye ◽  
Lian Guan Shen
Keyword(s):  
Wave Front ◽  
Quantitative Relationship ◽  
Fast Method ◽  
Mask Pattern ◽  
Lithography Simulation ◽  
Study Results ◽  
Simulation Results ◽  
Effective Wave ◽  
The Impact ◽  
Corner Error

As an important factor the error of mask pattern is often ignored in the lithography simulation model. To investigate the impact of mask errors on the lithographic pattern, effects of how the wave-front on different mask pattern region affects the field points in resist is first introduced, and based on this analysis a method is proposed to quickly judge the affection of round corner error of mask pattern on the photo-resist pattern. By comparing the actual effect area and the effective wave-front area around the corner on mask pattern, the method can illustrate the quantitative relationship between variation in photo-resist pattern and the related mask error. Finally the simulation results are verified by experiments. The study results may contribute to the fast and accurate judgments of error in the lithography, and provide important theoretical basis for lithography error correction.

Influence of Oriented Perforation Design on Refracture Reorientation: Simulation and Experiment

2018 ◽  
Vol 140 (8) ◽  
Author(s):  
Minhui Qi ◽  
Mingzhong Li ◽  
Tiankui Guo ◽  
Chunting Liu ◽  
Song Gao ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Large Scale ◽  
Simulation Models ◽  
Fracture Initiation ◽  
Simulation Method ◽  
Induced Stress ◽  
Study Results ◽  
Simulation Results ◽  
Fracturing Experiments ◽  
The Impact

The oriented perforating is the essential technique to guide the refracture reorientation, but the influence of the oriented perforation design on the refracture steering radius is still unclear. In this paper, the factors influencing the refracture reorientation were studied by simulation models and experiments. The effects of initial fracture, well production, and perforations on the refracture initiation and propagation were analyzed. Three-dimensional finite element models were conducted to quantify the impact of perforation depth, density, and azimuth on the refracture. The large-scale three-axis hydraulic fracturing experiments guided by oriented perforations were also carried out to verify the fracture initiation position and propagation pattern of the simulation results. The research results showed that perforations change the near-wellbore induced stress distribution, thus changing the steering radius of the refracture. According to the simulation results, the oriented perforation design has a significant influence on the perforation guidance effect and refracture characteristics. Five hydraulic fracturing experiments proved the influence of perforating parameters on fracture initiation and morphology, which have a right consistency between the simulation results. This paper presents a numerical simulation method for evaluating the influence of the refracture reorientation characteristics under the consideration of multiple prerefracturing induced-stress and put forward the oriented perforation field design suggestions according to the study results.

Income Diversification and Bank Efficiency in Vietnam

2017 ◽  
pp. 52-67
Author(s):  
Sang Nguyen Minh
Keyword(s):  
Regression Model ◽  
Commercial Banks ◽  
Banking System ◽  
Operational Efficiency ◽  
Commercial Banking ◽  
Tobit Regression ◽  
Income Diversification ◽  
Positive Effects ◽  
Study Results ◽  
The Impact

This study uses the DEA (Data Envelopment Analysis) method to estimate the technical efficiency index of 34 Vietnamese commercial banks in the period 2007-2015, and then it analyzes the impact of income diversification on the operational efficiency of Vietnamese commercial banks through a censored regression model - the Tobit regression model. Research results indicate that income diversification has positive effects on the operational efficiency of Vietnamese commercial banks in the research period. Based on study results, in this research some recommendations forpolicy are given to enhance the operational efficiency of Vietnam’s commercial banking system.

Some reflections on social structure: Theoretical and practical aspects

2020 ◽  
Vol 18 (6) ◽  
pp. 1063-1078
Author(s):  
T.N. Skorobogatova ◽  
I.Yu. Marakhovskaya
Keyword(s):  
Service Industry ◽  
External Factors ◽  
Infrastructure Development ◽  
Social Infrastructure ◽  
Social Sphere ◽  
The Social ◽  
Study Results ◽  
The Republic ◽  
Internal And External Factors ◽  
The Impact

Subject. This article discusses the role of social infrastructure in the national economy and analyzes the relationship between the notions of Infrastructure, Service Industry and Non-Productive Sphere. Objectives. The article aims to outline a methodology for development of the social infrastructure of Russia's regions. Methods. For the study, we used the methods of statistical and comparative analyses. The Republic of Crimea and Rostov Oblast's social infrastructure development was considered as a case study. Results. The article finds that the level of social infrastructure is determined by a number of internal and external factors. By analyzing and assessing such factors, it is possible to develop promising areas for the social sphere advancement. Conclusions. Assessment and analysis of internal factors largely determined by the region's characteristics, as well as a comprehensive consideration of the impact of external factors will help ensure the competitiveness of the region's economy.

The Impact of Bar Service Operation Practices on Organizational Performance in Indian Hotel Industry

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
Mohinder C. Dhiman ◽  
Abhishek Ghai
Keyword(s):  
Organizational Performance ◽  
Hotel Industry ◽  
Demographic Variables ◽  
Study Results ◽  
Service Operation ◽  
Managerial Implications ◽  
Overall Performance ◽  
The Impact ◽  
The Relationship ◽  
Bivariate Test

The paper has a two fold purpose - examine the impact of bar service operation practices (BSOP) on organizational performance (OP) and study the relationship between organizational performance and demographic variables. Based on a survey of 362 bar managers perceptions on the impact of bar service operation practices on organizational performance were assessed by 59 practices and 6 demographic variables. Bivariate test and ANOVA were employed to test the working hypothesis in the study. Results indicated that there is a positive relationship between the bar service operation practices and organizational performance. Further, the results indicate some practical and managerial implications to improve organizational overall performance.

scholarly journals Measuring Hydrometeors Using a Precipitation Microphysical Characteristics Sensor: Sampling Effect of Different Bin Sizes on Drop Size Distribution Parameters

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Xichuan Liu ◽  
Taichang Gao ◽  
Yuntao Hu ◽  
Xiaojian Shu
Keyword(s):  
Drop Size ◽  
Rain Rate ◽  
Monte Carlo Model ◽  
Rain Gauge ◽  
Sampling Schemes ◽  
Distribution Parameters ◽  
Optimum Sampling ◽  
Simulation Results ◽  
The Impact ◽  
Good Agreement

In order to improve the measurement of precipitation microphysical characteristics sensor (PMCS), the sampling process of raindrops by PMCS based on a particle-by-particle Monte-Carlo model was simulated to discuss the effect of different bin sizes on DSD measurement, and the optimum sampling bin sizes for PMCS were proposed based on the simulation results. The simulation results of five sampling schemes of bin sizes in four rain-rate categories show that the raw capture DSD has a significant fluctuation variation influenced by the capture probability, whereas the appropriate sampling bin size and width can reduce the impact of variation of raindrop number on DSD shape. A field measurement of a PMCS, an OTT PARSIVEL disdrometer, and a tipping bucket rain Gauge shows that the rain-rate and rainfall accumulations have good consistencies between PMCS, OTT, and Gauge; the DSD obtained by PMCS and OTT has a good agreement; the probability of N0, μ, and Λ shows that there is a good agreement between the Gamma parameters of PMCS and OTT; the fitted μ-Λ and Z-R relationship measured by PMCS is close to that measured by OTT, which validates the performance of PMCS on rain-rate, rainfall accumulation, and DSD related parameters.

scholarly journals Advances of 2nd Life Applications for Lithium Ion Batteries from Electric Vehicles Based on Energy Demand

2021 ◽  
Vol 13 (10) ◽  
pp. 5726
Author(s):  
Aleksandra Wewer ◽  
Pinar Bilge ◽  
Franz Dietrich
Keyword(s):  
Life Cycle ◽  
Lithium Ion Batteries ◽  
Electric Vehicles ◽  
Energy Demand ◽  
Lithium Ion ◽  
Life Cycles ◽  
Future Research ◽  
Research Areas ◽  
Study Results ◽  
The Impact

Electromobility is a new approach to the reduction of CO2 emissions and the deceleration of global warming. Its environmental impacts are often compared to traditional mobility solutions based on gasoline or diesel engines. The comparison pertains mostly to the single life cycle of a battery. The impact of multiple life cycles remains an important, and yet unanswered, question. The aim of this paper is to demonstrate advances of 2nd life applications for lithium ion batteries from electric vehicles based on their energy demand. Therefore, it highlights the limitations of a conventional life cycle analysis (LCA) and presents a supplementary method of analysis by providing the design and results of a meta study on the environmental impact of lithium ion batteries. The study focuses on energy demand, and investigates its total impact for different cases considering 2nd life applications such as (C1) material recycling, (C2) repurposing and (C3) reuse. Required reprocessing methods such as remanufacturing of batteries lie at the basis of these 2nd life applications. Batteries are used in their 2nd lives for stationary energy storage (C2, repurpose) and electric vehicles (C3, reuse). The study results confirm that both of these 2nd life applications require less energy than the recycling of batteries at the end of their first life and the production of new batteries. The paper concludes by identifying future research areas in order to generate precise forecasts for 2nd life applications and their industrial dissemination.

scholarly journals A New Method to Determine the Impact of Individual Field Quantities on Cycle-to-Cycle Variations in a Spark-Ignited Gas Engine

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4136
Author(s):  
Clemens Gößnitzer ◽  
Shawn Givler
Keyword(s):  
Kinetic Energy ◽  
Flow Field ◽  
Turbulent Kinetic Energy ◽  
Negative Impact ◽  
Operating Conditions ◽  
Engine Operation ◽  
Gas Engine ◽  
Cycle Simulation ◽  
Simulation Results ◽  
The Impact

Cycle-to-cycle variations (CCV) in spark-ignited (SI) engines impose performance limitations and in the extreme limit can lead to very strong, potentially damaging cycles. Thus, CCV force sub-optimal engine operating conditions. A deeper understanding of CCV is key to enabling control strategies, improving engine design and reducing the negative impact of CCV on engine operation. This paper presents a new simulation strategy which allows investigation of the impact of individual physical quantities (e.g., flow field or turbulence quantities) on CCV separately. As a first step, multi-cycle unsteady Reynolds-averaged Navier–Stokes (uRANS) computational fluid dynamics (CFD) simulations of a spark-ignited natural gas engine are performed. For each cycle, simulation results just prior to each spark timing are taken. Next, simulation results from different cycles are combined: one quantity, e.g., the flow field, is extracted from a snapshot of one given cycle, and all other quantities are taken from a snapshot from a different cycle. Such a combination yields a new snapshot. With the combined snapshot, the simulation is continued until the end of combustion. The results obtained with combined snapshots show that the velocity field seems to have the highest impact on CCV. Turbulence intensity, quantified by the turbulent kinetic energy and turbulent kinetic energy dissipation rate, has a similar value for all snapshots. Thus, their impact on CCV is small compared to the flow field. This novel methodology is very flexible and allows investigation of the sources of CCV which have been difficult to investigate in the past.

scholarly journals Robust Step Detection from Different Waist-Worn Sensor Positions: Implications for Clinical Studies

2020 ◽  
Vol 4 (1) ◽  
pp. 50-58
Author(s):  
Matthias  Tietsch ◽  
Amir Muaremi ◽  
Ieuan Clay ◽  
Felix Kluge ◽  
Holger Hoefling ◽  
...  
Keyword(s):  
Clinical Study ◽  
Clinical Studies ◽  
Neurological Diseases ◽  
Human Gait ◽  
Robust Solution ◽  
Step Detection ◽  
Study Protocols ◽  
Study Results ◽  
Wide Range ◽  
The Impact

Analyzing human gait with inertial sensors provides valuable insights into a wide range of health impairments, including many musculoskeletal and neurological diseases. A representative and reliable assessment of gait requires continuous monitoring over long periods and ideally takes place in the subjects’ habitual environment (real-world). An inconsistent sensor wearing position can affect gait characterization and influence clinical study results, thus clinical study protocols are typically highly proscriptive, instructing all participants to wear the sensor in a uniform manner. This restrictive approach improves data quality but reduces overall adherence. In this work, we analyze the impact of altering the sensor wearing position around the waist on sensor signal and step detection. We demonstrate that an asymmetrically worn sensor leads to additional odd-harmonic frequency components in the frequency spectrum. We propose a robust solution for step detection based on autocorrelation to overcome sensor position variation (sensitivity = 0.99, precision = 0.99). The proposed solution reduces the impact of inconsistent sensor positioning on gait characterization in clinical studies, thus providing more flexibility to protocol implementation and more freedom to participants to wear the sensor in the position most comfortable to them. This work is a first step towards truly position-agnostic gait assessment in clinical settings.

scholarly journals IMPACT OF LAPAROSCOPIC COLORECTAL SURGERY ON BODY IMAGE

2021 ◽  
Vol 108 (Supplement_3) ◽  
Author(s):  
A Fernández Candela ◽  
L Sánchez-Guillén ◽  
L García Catalá ◽  
C Curtis Martínez ◽  
M Bosch Ramírez ◽  
...  
Keyword(s):  
Body Image ◽  
Colorectal Surgery ◽  
Laparoscopic Colorectal Surgery ◽  
Wound Complication ◽  
Descriptive Study ◽  
Surgical Quality ◽  
Body Image Scale ◽  
Study Results ◽  
The Impact ◽  
Observational Descriptive Study

Abstract INTRODUCTION The aim of this study is to evaluate the impact of laparoscopic colorectal surgery (LCS) on body image using the validated Body Image Scale (BIS) as a parameter of surgical quality. MATERIAL AND METHODS We conducted an observational descriptive study. Patients who underwent scheduled LCS between June 2015 and December 2019 by a General Hospital Coloproctology Unit were included. RESULTS The sample included 180 patients, 115 men (63.9%) and 65 women (36.1%) with a median age of 67 years. Right hemicolectomies (31.7%) and sigmoidectomies (28.3%) were the main procedures performed. In most patients, a suprapubic (69.4%) or transverse (19.4%) incision was made. 21.9% suffered some type of postoperative complication (13.9% wound complication, 10.6% incisional hernia). The general result of the BIS questionnaire was satisfactory, with a median of 0 in the responses (no alteration of body image). We found that 46.2% of the women had some alteration in body image, compared to 28.7% of the men (p = 0.018) and low and ultra-low anterior resection were the surgeries that obtained worst scores, with 13,5% and 12,5% respectively of patients with a BIS score above 5 (p = 0.044). Patients with a stoma also obtained worst punctuation (25% above 5 vs 6,1%, p = 0.001). No statistically significant differences were found regarding type of incision, presence of complications and anxiety or depression. CONCLUSION Study results show, in general, good post-surgical body image after LCS. However, patients with stoma and women were more dissatisfied. Interestingly, there is no worse body image due to type of incision, so we recommend the least iatrogenic one.

scholarly journals Variation in performance on common content items at UK medical schools

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
David Hope ◽  
David Kluth ◽  
Matthew Homer ◽  
Avril Dewar ◽  
Richard Fuller ◽  
...  
Keyword(s):  
Undergraduate Students ◽  
Standard Setting ◽  
Medical Schools ◽  
Cross Sectional Study ◽  
Pass Rates ◽  
Cross Sectional ◽  
Study Results ◽  
Institutional Differences ◽  
Common Content ◽  
The Impact

Abstract Background Due to differing assessment systems across UK medical schools, making meaningful cross-school comparisons on undergraduate students’ performance in knowledge tests is difficult. Ahead of the introduction of a national licensing assessment in the UK, we evaluate schools’ performances on a shared pool of “common content” knowledge test items to compare candidates at different schools and evaluate whether they would pass under different standard setting regimes. Such information can then help develop a cross-school consensus on standard setting shared content. Methods We undertook a cross-sectional study in the academic sessions 2016-17 and 2017-18. Sixty “best of five” multiple choice ‘common content’ items were delivered each year, with five used in both years. In 2016-17 30 (of 31 eligible) medical schools undertook a mean of 52.6 items with 7,177 participants. In 2017-18 the same 30 medical schools undertook a mean of 52.8 items with 7,165 participants, creating a full sample of 14,342 medical students sitting common content prior to graduation. Using mean scores, we compared performance across items and carried out a “like-for-like” comparison of schools who used the same set of items then modelled the impact of different passing standards on these schools. Results Schools varied substantially on candidate total score. Schools differed in their performance with large (Cohen’s d around 1) effects. A passing standard that would see 5 % of candidates at high scoring schools fail left low-scoring schools with fail rates of up to 40 %, whereas a passing standard that would see 5 % of candidates at low scoring schools fail would see virtually no candidates from high scoring schools fail. Conclusions Candidates at different schools exhibited significant differences in scores in two separate sittings. Performance varied by enough that standards that produce realistic fail rates in one medical school may produce substantially different pass rates in other medical schools – despite identical content and the candidates being governed by the same regulator. Regardless of which hypothetical standards are “correct” as judged by experts, large institutional differences in pass rates must be explored and understood by medical educators before shared standards are applied. The study results can assist cross-school groups in developing a consensus on standard setting future licensing assessment.

Sign in / Sign up

Export Citation Format

Share Document