scholarly journals Cultivation of the Targeted Forest Plantations

2020 ◽  
Vol 8 (4) ◽  
pp. 1385-1393
Keyword(s):  
Parameters Optimization ◽  
Energy Costs ◽  
Energy Reserves ◽  
Technological Parameters ◽  
Additional Energy ◽  
Energy Effect ◽  
Technical Parameters ◽  
Effect Model ◽  
Forest Use ◽  
The Cost

Targeted reforestation refers to ecosystems with natural and artificial energy reserves. Additional energy reserves are spent on grow-ing and harvesting, various types of forest care, forest use, and delivery of products to consumers, including energy costs for all types of preparation. The wood to be harvested must be assessed on the energy consumption required for its production. The purpose of this work was to develop a comprehensive methodology to assess the energy effect, model the process of plantation operation considering the soil type, tree species, and technical parameters of operating machines. According to the estimation results of the trunk wood energy value, it has been established that depending on the growth rate and maturity level, the target plantations are divided into two types, which should be taken into account during planting and subsequent rotation. It is shown that with regard to the technological features of machine sys-tems and the type of plantation, it is necessary to consider dimensional characteristics of the planting scheme and the technological cycle of exploiting the forest plantation. The results of mathematical modeling following the technological parameters of operating machines and all types of costs showed that the cost of the selected target species for reforestation can provide sufficient profit when optimizing the machine system operations. The principle of modular division of machines system on power, technological, and transport modules is offered, which vary in purpose, criteria of parameters optimization, and indicators of work. The obtained mathematical model and meth-odology of target planting optimization can be applied in forestry and agricultural complexes, as well as become the basis for further research in this direction.

scholarly journals INFLUENCE OF DESIGN OPERATING AND TECHNOLOGICAL PARAMETERS OF AUGER-BLADE MIXER ON POWER CONSUMED BY IT

2019 ◽  
pp. 38-47
Author(s):  
Николай Хольшев ◽  
Nikolai Khol'shev ◽  
Виктор Мухин ◽  
Viktor Mukhin ◽  
Светлана Петрова ◽  
...  
Keyword(s):  
Power Consumption ◽  
Specific Energy ◽  
Energy Costs ◽  
Mixing Process ◽  
Technological Parameters ◽  
Mixer Design ◽  
Dry Mixing ◽  
Blade Mixer ◽  
Main Components ◽  
The Cost

The purpose of the study – is the equipment improvement for dry mixing of crumbled feed with substantiation of de-sign and operating parameters. The use of complete feed mixtures is possible only with the use of special techno-logical equipment – feed mixers, producing mixture homogeneity meeting livestock requirements. The costs of pur-chasing, operating and maintaining mixers ultimately affect the cost of livestock production. Accordingly, it is neces-sary to aim efforts at the reduction of these costs. This can be achieved by reducing the specific energy costs for the mixing process, which largely depend on the mixer design, its working parts operation and the efficiency of the mix-ing process and power consumption needed for mixing process. No method of power consumption estimation of mixers with combined working parts according to theoretical studies obtained, having alternating in regard to exe-cution and purpose areas. Power consumption needed for the mixing process is one of the main components of the operating costs for the mixing equipment, ultimately determining the specific energy costs for the mixing process – is one of the important specification of any mixer. The research methodology provided a theoretical basis for the relationship of the mixer parameters on the power consumption during mixing process. Equations for determining the power consumption for the parts were submitted in regard to auger conveyor, the first and the second transport-ing and throwing blades. The expression for determination of power consumption for mixing process from the an-gle of installation mixing and transporting blades, the filling ratio of the mixer and the frequency of rotation of the working parts have been received. The obtained and given expressions allow to determine the power values for the mixing process with an error of no more than 5%, with the values of the studied parameters of the mixer within the boundaries of the experiment.

scholarly journals Increasing the efficiency of use of wheeled harrow units in regions of risk farming

2021 ◽  
Vol 262 ◽  
pp. 01003
Author(s):  
A. E. Slepenkov ◽  
E. S. Polikutina ◽  
S. V. Shchitov ◽  
E. E. Kuznetsov ◽  
Z. F. Krivutsa
Keyword(s):  
Crop Yields ◽  
Soil Layer ◽  
Energy Costs ◽  
Depth Of Processing ◽  
Additional Energy ◽  
Main Technological Parameter ◽  
Important Field ◽  
The Russian Federation ◽  
The Cost

Crop yields largely depend on the quality of the soil prepared for sowing. At the same time, one of the most important field operations is harrowing, with the main technological parameter of harrowing is the depth of processing of the fertile soil layer. Failure to do not have the necessary depth of processing leads to a decrease in yields, and the excess - to additional energy costs, and therefore to increase the cost of a unit of the resulting products. As you know, the main parameter influencing the depth of processing is the weight that falls on the working organ of the harrow. This article proposes a device that has obtained a patent for the intellectual property of the Russian Federation, allowing to regulate the weight of the working organ of the harrow, due to its optimal redistribution within the machine-tractor unit (MTU), and the theoretical and experimental results of the experimental harrowing unit are provided. The results suggest that the proposed solution is highly effective, which provides as an opportunity for quality pre-planting treatment, and contributes to the compliance with the necessary agro-technological requirements for the harrowing process.

scholarly journals Obtaining formaldehyde on a new catalytic system

2018 ◽  
Vol 80 (2) ◽  
pp. 275-282
Author(s):  
I. N. Shumkova ◽  
T. S. Linkova ◽  
D. N. Zemskii ◽  
O. V. Khabibrakhmanov
Keyword(s):  
Oxidative Dehydrogenation ◽  
Catalytic System ◽  
Raw Materials ◽  
Process Temperature ◽  
Energy Costs ◽  
Practical Application ◽  
Technological Parameters ◽  
Industrial Plants ◽  
Oxidation Of Methanol ◽  
The Cost

Formaldehyde is widely used in many fields of industry. The increase in the need for formaldehyde led to an increase in scientific research, the purpose of which is to obtain the greatest yield of the product (formaldehyde) with minimal costs for raw materials, catalyst and its regeneration, energy carriers, etc. At industrial plants for the production of formaldehyde by oxidative dehydrogenation of methanol on the silver on pumice catalyst, the process temperature is maintained at 600 ° C. The process of obtaining formaldehyde by oxidation of methanol with air oxygen at the combination of catalysts "silver" and "silver on pumice" in the temperature range of 250–450 °C is investigated. The results showed the possibility of practical application of the combined catalyst. Chemical and technological parameters of the process with the use of a new catalyst are slightly lower than production indicators, however, the temperature of the pilot process is 2 times lower - this will reduce not only the energy costs, but also increase the life of the catalyst and the cost of its regeneration.

Automated Control of the Microclimate in the Premises of Pig-Breeding Complexes

2020 ◽  
pp. 103-108
Author(s):  
Viktoriya Yu. Ukhanova
Keyword(s):  
Agricultural Production ◽  
Individual Characteristics ◽  
Feed Consumption ◽  
Management Systems ◽  
Research Purpose ◽  
Energy Costs ◽  
Technical Equipment ◽  
Pig Farming ◽  
The Individual ◽  
The Cost

In the pig breeding, a large share of the production cost is accounted for by the cost of electricity and heat. Reducing energy costs is one of the important tasks of the industry. It is important to identify and study modern technologies and equipment for pig farming due to the constant increase in electricity tariffs, significant energy costs for creating and maintaining a microclimate. (Research purpose) The research purpose is in an analysis of modern available technologies and equipment for agricultural production, including pig farming, allowing to reduce the cost of production. (Materials and methods) Authors used a method for determining the standard indicators of energy consumption of energy resources in the pig industry, based on the calculation and analytical method. The article presents an analyze of automated microclimate management systems in pig breeding complexes, taking into account the individual characteristics of farms produced by OWEN. (Results and discussion) Automated microclimate management systems can improve the productivity of pig farms; reduce the cost of electrical and thermal energy, reduce the number of diseases of animal from hypothermia, high humidity or temperature in the room, feed consumption; monitor the chemical composition of the air. The article considers three options for creating a microclimate in rooms with animals, taking into account the individual characteristics of enterprises. (Conclusions) The profitability of pig production depend on the level of technical equipment of farms, automation, and the use of energy-saving technologies and equipment. The use of innovations in agricultural production makes it possible to increase labor productivity up to three times, and savings due to reduced feed costs can reach several million rubles a year.

The effects of metabolic inhibitors on the contraction of creatine-depleted muscle

1982 ◽  
Vol 60 (2) ◽  
pp. 114-119 ◽  
Author(s):  
G. W. Mainwood ◽  
M. Alward ◽  
B. Eiselt
Keyword(s):  
Creatine Phosphate ◽  
Diaphragm Muscle ◽  
Metabolic Inhibitors ◽  
Energetic Cost ◽  
Energy Reserves ◽  
Similar Extent ◽  
Additional Energy ◽  
Energy Stores ◽  
Wet Weight ◽  
The Mean

Rats were fed on a diet containing 1% β-guanidinopropionate (Gp) to deplete their muscles of creatine. The apparent energy reserves (creatine phosphate (CrP) + ATP) of rested state diaphragm muscle strips were found to be 79% depleted by this treatment. To determine if the effective energy reserves for contraction were depleted to a similar extent, the response to direct electrical stimulation (0.2-s tetani) was measured in the presence of inhibitors of respiration (NaCN) and glycolysis (iodoacetate). Only 4 ± 1 contractions could be elicited from strips from Gp-fed animals. Normal strips gave 15 ± 2 contractions under the same conditions. For both sets of diaphragms the energetic cost of contraction in terms of ~P was approximately 1 μmol/g wet weight. The mean level of Pi generated following stimulation to exhaustion was 10.1 μmol/g more in normal than in depleted strips. It is concluded that no significant additional energy stores such as phosphorylated Gp are readily available for contraction in muscles depleted of creatine by Gp treatment.

FORMATION OF MATERIAL AND ENERGY COSTS IN THE GRAIN-TILLAGE LINK OF CROP ROTATION DURING PLOWING, SURFACE AND ZERO (CHEMICAL) PROCESSING OF ORDINARY CHERNOZEM

2021 ◽  
Vol 21 (3) ◽  
pp. 87-96
Author(s):  
V.S. Polous ◽  
◽  
S.N. Osaulenko ◽  
L.O. Prokopova ◽  
◽  
...  
Keyword(s):  
Crop Rotation ◽  
Control Surface ◽  
Ordinary Chernozem ◽  
Energy Costs ◽  
Efficiency Coefficient ◽  
Net Income ◽  
Additional Energy ◽  
No Till ◽  
Material Energy ◽  
Rota Tion

The purpose of the research was to determine the material, energy and other indicators for the cul-tivation of crops of the crop rotation link using fertilizers, pesticides and effective growth stimu-lators for different-depth basic soil treatment. It was found that the crops of the grain-tillage rota-tion link, which were cultivated by plowing to a depth of 22-24 cm (control), surface treatment to a depth of 6-8 cm and zero (chemical) treatment significantly changed their productivity, and also formed various production, and therefore energy costs. The yield of oilseed flax was 1.70 t / ha, winter wheat-6.23 t / ha, mogar grain of crop sowing-0.49 t / ha, mogar hay-1.74 t / ha, peas-3.86 t/ha. The yield of these crops obtained using the no-till technology was, respectively, at 12- 3- 0 – 4 the percentage is lower than in the control. The largest net income (64090 rubles / ha), the amount of additional energy (220998 Mj) and the energy efficiency coefficient (3.5) were formed during surface tillage for crops of the crop rotation link, including due to the mogar of crop sow-ing, respectively 3370 rubles/ha and 243208 Mj. Cultivation of 4 field crops in 3 agricultural years significantly increases the economic and bioenergetic efficiency of production and can be applied in other regions.

THE TECHNICAL CONDITION OF THE SURVEYED HYDRAULIC UNITS IN THE MOSCOW REGION AND THE CLASSIFICATION FEATURES OF THEIR RESERVOIRS

2021 ◽  
pp. 69-79
Author(s):  
V. V. GRITSAN ◽  
Keyword(s):  
Technical Condition ◽  
Moscow Region ◽  
Risk Level ◽  
Ecological Framework ◽  
Safety Level ◽  
Repair Work ◽  
Hydraulic Unit ◽  
Technical Parameters ◽  
Characteristic Features ◽  
The Cost

The article presents the results of surveys of 311 class IV hydraulic structures carried out in 2016-2020 in the Moscow region. All the reservoirs of the surveyed hydraulic units were classified according to their characteristic features, the technical condition of culverts and dams was assessed, there was established the safety level of both separate structures and hydraulic units as a whole. During the surveys, the technical parameters of the surveyed structures were established, the state of each structure and the hydraulic unit as a whole was assessed, a possibility of their accident and a risk level for the downstream areas were considered. At the same time, recommendations were developed for the elimination of serious damage and, with the help of an examination, the amount of the cost of the necessary repair work was determined. The paper also assesses the issues of the ecological state of the areas where the hydraulic units are located and the hydraulic units themselves as blocks of the ecological framework of the territories.

scholarly journals ANALYSIS OF EXTERNAL ENGINEERING NETWORK METHODS

2020 ◽  
Vol 4 (157) ◽  
pp. 7-11
Author(s):  
V. Zhvan ◽  
V. Donenko ◽  
S. Kulish ◽  
A. Taran
Keyword(s):  
Physical And Mechanical Properties ◽  
Directional Drilling ◽  
Horizontal Directional Drilling ◽  
Technological Parameters ◽  
Optimal Method ◽  
Advantages And Disadvantages ◽  
Analytical Review ◽  
Conducting Research ◽  
The Cost ◽  
Selection Of

The article is devoted to the effective analysis of trench and trenchless pipeline laying technologies. In the course of the work, an analytical review of pipeline assembly was performed, the main technological parameters, the scope of each method, and their advantages and disadvantages were determined. List of considered pipeline laying methods: trenching, horizontal directional drilling, mechanical puncture, hydraulic puncture, microtunneling and punching. The article analyzes the classical trench method and the most widely used trenchless ones: horizontal directional drilling; mechanical puncture; hydraulic puncture; microtunneling; punching. Each of these methods has several advantages and disadvantages. The choice of the optimal method of laying the pipeline depends on many factors: the physical and mechanical properties of soils and hydrogeological conditions, the length and diameter of the pipeline, the presence of other communications, buildings and structures, as well as the budget that customers have. Work time is the last deciding factor. Based on the results of the analysis of pipeline laying technologies and expert survey of construction industry experts, the cost table of each method was compiled, outlining the main characteristics of the technology: length of pipeline, speed of work, scope, cost, and the advantages and disadvantages of each of the considered methods. The conclusions about the use of each of the pipeline laying methods were made. Each of the methods has its advantages and disadvantages, so to choose the method of work it is necessary to conduct a comprehensive assessment of technological parameters, cost, scope and timing of work. The cost of lay-ing the pipeline consists of the following factors: conducting research; selection of diameter and determination of pipeline length; choice of laying method and equipment necessary for the works; selection of equipment, shut-off and control equipment and other materials arranged on the pipeline; terms of performance of works. Taking into account these factors, an estimate is made, which determines the cost of installation of a particular pipeline. After the analysis, we can conclude that among the methods of trenchless laying of pipelines can be identi-fied horizontally directional drilling, it is this method of laying the pipeline will be appropriate to use for our region. The drilling technique allows to carry out pipelines under obstacles, to pull long segments of networks, to repair site damage. This method is universal and can be used in almost any environment. Keywords: trenches, horizontal directional drilling, mechanical puncture, hydraulic piercing, microtunnelling, punching, pipeline.

scholarly journals Optimization of tablet formulation containing ginger dry extract

2020 ◽  
Vol 33 (2) ◽  
pp. 90-93
Author(s):  
Walid A.A. Malek ◽  
Olena Anatoliivna Ruban ◽  
Olga V. Kutova ◽  
Nataliia A. Herbina
Keyword(s):  
Tablet Formulation ◽  
Regression Equations ◽  
Diabetes Treatment ◽  
Optimal Composition ◽  
European Pharmacopoeia ◽  
Technological Parameters ◽  
Mathematical Methods ◽  
Dry Extract ◽  
Technical Parameters ◽  
Effective Drugs

AbstractIntroduction. Diabetes mellitus is one of the world’s most common diseases, therefore the development and introduction of new effective drugs for diabetes treatment into clinical practice is an important task for the health systems of many countries of the world.Aim. The aim of our work was to determine and substantiate the quantitative ratio of excipients for the development of the optimal composition of directly compressible ginger dry extract tablets.Materials and methods. To choose the optimal composition of tablets containing ginger dry extract, the effect of various quantitative ratios of the excipients Kollidon K30 and Neusilin UFL 2 on tablet mass pharmaceutical technical parameters, determined by established methods, was studied. For processing the experimental data, mathematical methods were used: design of experiment, regression analysis and a technique based on the theory of vector optimization.Results. The interrelation between factors that were studied and technological parameters of tablet mass and compressed tablets were analyzed using regression equations.Conclusions. The studies conducted allowed to chose the optimal composition of ginger dry extract tablets: ginger dry extract – 60%, Galen IQ 721 – 34.5%, Kollidon K30 – 3.5%, Neusilin UFL 2 – 1%, calcium stearate – 1%. The chosen tablet formulation is characterized by pharmaceutical technical parameters meeting the requirements of the European Pharmacopoeia and the State Pharmacopoeia of Ukraine.

scholarly journals Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode

2019 ◽  
Vol 56 (2) ◽  
pp. 440-443
Author(s):  
Mircea Dorin Vasilescu
Keyword(s):  
Optical Microscope ◽  
Functional Domain ◽  
Conserved Quantities ◽  
Technological Parameters ◽  
Specific Design ◽  
Domain Specific ◽  
Cylindrical Gears ◽  
3D Printed ◽  
Mechanical Elements ◽  
The Cost

The aim of the work is conduct to highlight how the technological parameters has influence of 3D printed DLP on the generation of wheel, made from resin type material. In the first part of the paper is presents how to generate in terms of dimensional aspects specific design cylindrical gears, conical and worm gear. Generating elements intended to reduce the cost of manufacturing of these elements. Also are achieve the specific components of this work are put to test with a laboratory test stand which is presented in the paper in the third part of the paper. The tested gears generated by 3D-printed technique made with 3D printed with FDM or DLP technique. After the constructive aspects, proceed to the identification of conserved quantities, which have an impact both in terms of mechanical strength, but his cinematic, in order to achieve a product with kinematic features and good functional domain specific had in mind. The next part is carried out an analysis of the layers are generated using the DLP and FDM method using an optical microscope with magnification up to 500 times, specially adapted in order to achieve both visualization and measurement of specific elements. In the end part, it will highlight the main issues and the specific recommendations made to obtain such constructive mechanical elements.

Sign in / Sign up

Export Citation Format

Share Document