ESSENTIAL CHARACTERISTICS OF PLASTICS WASTE FOR PYROLYSIS PROCESS: COMPARISON OF SELECTED PACKAGING PLASTICS AND PVC

2015 ◽  
Vol 77 (23) ◽  
Author(s):  
Maryudi Maryudi ◽  
Martomo Setyawan ◽  
Noni Noni ◽  
Samihah Yahayor
Keyword(s):  
Water Content ◽  
Decomposition Temperature ◽  
Ash Content ◽  
Plastic Waste ◽  
Pyrolysis Process ◽  
Process Comparison ◽  
The Poor ◽  
Plastic Wastes ◽  
Three Stages ◽  
Plastics Waste

The poor degradability of plastics has led to huge plastics deposit in a landfill of which pyrolysis technology has been proposed to solve plastics waste problem. This paper reports the study on characteristics of two kinds of plastic wastes: selected packaging plastics and PVC. Characterizations have been performed for investigating water content, ash content, and decomposition temperature. The results revealed that the water content of packaging plastic waste was 0.69 ± 0.11%, while PVC was 1.22 ± 0.24%. The ash contents are 2.36 ± 1.03 % and 27.24±1.73 % for packaging plastics waste and PVC waste respectively. Plastic waste from packaging application and PVC waste decomposed at a temperature of 300-500°C and 200-800°C respectively. Decomposition of PVC waste took place in three stages: 200-370°C, 370-525°C and 600-800°C. It is recommended that the pyrolysis process should be conducted in the range of 300-500°C for packaging plastic waste and 200-800°C for PVC waste.

scholarly journals Pengolahan Sampah Organik dan Limbah Biomassa dengan Teknologi Olah Sampah di Sumbernya

2021 ◽  
Vol 6 (3) ◽  
Author(s):  
I Made Indradjaja M. Brunner ◽  
Arief Norhidayat ◽  
Satria M. Brunner
Keyword(s):  
Moisture Content ◽  
Water Content ◽  
Early Stage ◽  
Calorific Value ◽  
Ash Content ◽  
Waste Processing ◽  
Biomass Waste ◽  
Aerobic Activity ◽  
Three Stages ◽  
Biomass Pellet

Solid Waste Processing Technology at the Source (TOSS) is an alternative method in processing organic and biomass waste on a communal scale. The processing of organic and biomass waste material is carried out in three stages of the process: biodrying which utilizes the aerobic activity of microorganisms; chopping which is intended to refine the material, and pelletization to compact the material into biomass pellets. The biodrying process in bamboo boxes is able to reduce the water content in organic and biomass waste within 4-5 days. Sorting of non-organic materials can be done at an early stage before or after the biodrying process. Sorting is required before chopping and pelletizing process to avoid unnecessary machine break down. The biomass pellet which is the final product has a diameter of about 10 mm with a length between 10-40 mm, a calorific value between 3000-4000 kcal/kg, and a moisture content of up to 15%. Compared to coal, biomass pellets tend to have higher volatile and ash content, while lower ash and sulfur content.

scholarly journals Pengolahan Sampah Organik Menjadi Biobriket Sebagai Energi Terbarukan

2020 ◽  
Vol 3 (2) ◽  
pp. 58
Author(s):  
G M Saragih ◽  
Marhadi Marhadi ◽  
Yulia Defriati
Keyword(s):  
Water Content ◽  
Organic Waste ◽  
Calorific Value ◽  
Ash Content ◽  
Plastic Waste ◽  
Optimum Composition ◽  
Domestic Production ◽  
Organic Composition ◽  
Inorganic Waste ◽  
The City

One of the uses of organic waste is processing it into biomass briquettes which can later be used as energy. Organic waste received is dry organic waste such as dry leaves, dry twigs, inorganic waste such as plastic waste which can be used as an adhesive in making waste biobriquettes. The purpose of processing organic and inorganic waste into energy is to benefit from the waste in the city of Jambi. The benefit obtained is to reduce waste which can be used as energy. The kerosene to LPG conversion program has resulted in a rapid increase in LPG consumption which domestic production cannot meet. This causes LPG imports to increase rapidly, so that if in 2007 the volume of LPG imports was still at 137 thousand tons, in 2011 it increased to 1,992 thousand tons or an increase of almost 15 times (Outlook Energi Indonesia 2013). The highest calorific value with the optimum composition is found in biobriquette sample 3 with a variation of the composition of 75% organic waste: 5% inorganic waste: 10% water: 10% glue, which is 19361 J / gr. The lowest ash content with the optimum composition was found in sample 3 with a variation of the composition of 75% organic waste: 5% inorganic waste: 10% water: 10% glue, namely 5.06%. The lowest water content with the optimum composition is found in sample 1 and sample 2 with a water content of 0.92%, this is already in accordance with SNI for biobriquettes. The lowest CO content with the optimum composition is found in the biobriquette sample 1 with a variation of the organic composition of 85%: 5% inorganic: 5% water: 5% glue, which is 60.33 μg/Nm3.

A Preliminary Study on Recyclability of Mixed Plastic Wastes Recovered from Urban Collection

2021 ◽  
Vol 885 ◽  
pp. 109-114
Author(s):  
Raffaella Ferraioli ◽  
Loredana Incarnato ◽  
Luciano Di Maio ◽  
Paola Scarfato
Keyword(s):  
Water Content ◽  
Chemical Properties ◽  
Polymeric Materials ◽  
Melt Processing ◽  
Plastic Waste ◽  
Mechanical Recycling ◽  
Single Screw Extruder ◽  
Plastic Wastes ◽  
And Performance ◽  
Recycled Plastics

The management of post-consumer plastic waste (PCPW) is a real challenging issue due to difficulties in effectively identifying and sorting the collected plastics and in their mechanical recycling. Indeed, mechanically recycled post-consumer plastic waste usually shows poor performances compared to virgin materials, due to incompatibility between constituents, presence of degraded materials, hygroscopicity and bad odors. Compatibilizers and nanoparticles can help to improve recycled plastics quality, but to be chosen and dosed properly they require an in-depth knowledge and characterization of the raw waste. In this study, an analysis of polymeric materials obtained from the separation and mechanical recycling of post-consumer plastic wastes from urban collection as pellets (UPW) is reported. In particular, the experimental characterization was carried out in order to identify UPW composition, water content, physical-chemical properties and processability. It was found that UPW samples are mainly constituted of polyethylene (PE) and polypropylene (PP) in equal parts. UPW was submitted to a melt processing operation, using a lab-scale single-screw extruder, obtaining ribbons that were completely characterized. With the aim to investigate the effect of water content on the recycled material processability and performance, the recycling process was carried out both on undried and dried UPW pellets.

scholarly journals Application of the Calorimetric Methods to the Characteristics of Seeds from Olives

Proceedings ◽  
2020 ◽  
Vol 70 (1) ◽  
pp. 90
Author(s):  
Andrzej Bryś ◽  
Joanna Bryś ◽  
Marko Obranović ◽  
Dubravka Škevin ◽  
Szymon Głowacki ◽  
...  
Keyword(s):  
Olive Oil ◽  
Water Content ◽  
Cooling System ◽  
Waste Product ◽  
Normal Pressure ◽  
Ash Content ◽  
Initial Water Content ◽  
Scanning Calorimetry ◽  
Initial Water

The olive oil industry represents an important productive sector in the Mediterranean basin countries. Olive stone is an essential by-product generated in the olive oil extraction industries and it represents roughly 10% by weight of the olive fruit. The seeds of pickled olives are also a significant waste product. In the present study, we have investigated the possibility of the use of differential scanning calorimetry for the thermal characterization of seeds from green and black pickled olives from Croatia. The differential scanning calorimeter (DSC) with a normal pressure cell equipped with a cooling system was used to determine the thermal properties of seeds from olives. The following analyses were also performed: the determination of calorific values in a pressure bomb calorimeter, the determination of initial water content, the determination of changes of water content during drying at the temperatures of 30 °C, 50 °C and 80 °C, the determination of a percentage content of seeds mass to the mass of the whole olives, and the determination of ash content. Seeds from olives are characterized by very good parameters as a biomass. The analyzed olive seeds were characterized by low water content, low ash content, and a relatively high caloric value.

scholarly journals Application of Plastic Wastes in Construction Materials: A Review Using the Concept of Life-Cycle Assessment in the Context of Recent Research for Future Perspectives

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3549
Author(s):  
Tulane Rodrigues da Silva ◽  
Afonso Rangel Garcez de Azevedo ◽  
Daiane Cecchin ◽  
Markssuel Teixeira Marvila ◽  
Mugahed Amran ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Solid Waste ◽  
Building Materials ◽  
Construction Materials ◽  
Plastic Waste ◽  
Plastic Wastes ◽  
Solid Waste Generation ◽  
Alternative Processes

The urbanization process contributes to the growth of solid waste generation and causes an increase in environmental impacts and failures in the management of solid waste. The number of dumps is a concern due to the limited implementation and safe disposal of this waste. The interest in sustainable techniques has been growing in relation to waste management, which is largely absorbed by the civil construction sector. This work aimed to review plastic waste, especially polyethylene terephthalate (PET), that can be incorporated with construction materials, such as concrete, mortars, asphalt mixtures, and paving. The use of life-cycle assessment (LCA) is related, as a tool that allows the sustainability of products and processes to be enhanced in the long term. After analyzing the recent literature, it was identified that studies related to plastic wastes in construction materials concentrate sustainability around the alternative destination of waste. Since the plastic waste from different production chains are obtained, it was possible to affirm the need for a broader assessment, such as the LCA, providing greater quantification of data making the alternative processes and products more sustainable. The study contributes to enhance sustainability in alternative building materials through LCA.

scholarly journals Taming nitroformate through encapsulation with nitrogen-rich hydrogen-bonded organic frameworks

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jichuan Zhang ◽  
Yongan Feng ◽  
Richard J. Staples ◽  
Jiaheng Zhang ◽  
Jean’ne M. Shreeve
Keyword(s):  
Thermal Stability ◽  
Hydrogen Bonds ◽  
Self Assembly ◽  
Energetic Materials ◽  
Decomposition Temperature ◽  
High Oxygen Content ◽  
The Poor ◽  
Simple Preparation ◽  
First Time ◽  
Hydrogen Bonded

AbstractOwing to its simple preparation and high oxygen content, nitroformate [−C(NO2)3, NF] is an extremely attractive oxidant component for propellants and explosives. However, the poor thermostability of NF-based derivatives has been an unconquerable barrier for more than 150 years, thus hindering its application. In this study, the first example of a nitrogen-rich hydrogen-bonded organic framework (HOF-NF) is designed and constructed through self-assembly in energetic materials, in which NF anions are trapped in pores of the resulting framework via the dual force of ionic and hydrogen bonds from the strengthened framework. These factors lead to the decomposition temperature of the resulting HOF-NF moiety being 200 °C, which exceeds the challenge of thermal stability over 180 °C for the first time among NF-based compounds. A large number of NF-based compounds with high stabilities and excellent properties can be designed and synthesized on the basis of this work.

Some Properties and Detection Methods of Paper Sludge

2012 ◽  
Vol 560-561 ◽  
pp. 52-56
Author(s):  
Kai Zhang ◽  
Chao Jun Wu ◽  
Jia Chuan Chen
Keyword(s):  
Water Content ◽  
Organic Material ◽  
Ph Value ◽  
Optical Microscope ◽  
Ash Content ◽  
Detection Methods ◽  
Paper Sludge ◽  
Sludge Treatment ◽  
Material Content ◽  
The Third

Some properties of paper sludge were analyzed, including water content, organic material content, pH value, fiber content, ash content ,C, H, S, N content and metal content of sludge in three sedimentation tanks.Besides,COD,SS, sludge concentration were analyzed and optical microscope photoes of sludge were got.The results showed that water content was high, organic material content was high, pH value of three sludges was alkalescent, metal elements were varied, lots of bacteria in wet sludge. From the first tank to the third one,COD and SS are gradually diminishing The research of sludge’s properties may be helpful to sludge treatment.

scholarly journals Potential Chemicals from Plastic Wastes

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3175
Author(s):  
Ravindra Prajapati ◽  
Kirtika Kohli ◽  
Samir K. Maity ◽  
Brajendra K. Sharma
Keyword(s):  
Environmental Protection Agency ◽  
State Of The Art ◽  
Plastic Waste ◽  
Chemical Production ◽  
Protection Agency ◽  
Medical Apparatus ◽  
Plastic Materials ◽  
Future System ◽  
Plastic Wastes ◽  
The U.S

Plastic is referred to as a “material of every application”. From the packaging and automotive industries to the medical apparatus and computer electronics sectors, plastic materials are fulfilling demands efficiently. These plastics usually end up in landfills and incinerators, creating plastic waste pollution. According to the Environmental Protection Agency (EPA), in 2015, 9.1% of the plastic materials generated in the U.S. municipal solid waste stream was recycled, 15.5% was combusted for energy, and 75.4% was sent to landfills. If we can produce high-value chemicals from plastic wastes, a range of various product portfolios can be created. This will help to transform chemical industries, especially the petrochemical and plastic sectors. In turn, we can manage plastic waste pollution, reduce the consumption of virgin petroleum, and protect human health and the environment. This review provides a description of chemicals that can be produced from different plastic wastes and the research challenges involved in plastic waste to chemical production. This review also provides a brief overview of the state-of-the-art processes to help future system designers in the plastic waste to chemicals area.

scholarly journals PENGARUH PERBANDINGAN TEPUNG KACANG HIJAU (Vigna radiata) DAN TERIGU TERHADAP KARAKTERISTIK BAKSO ANALOG

2018 ◽  
Vol 7 (1) ◽  
pp. 12
Author(s):  
Utafiyani . ◽  
Ni Luh Ari Yusasrini ◽  
I Gusti Ayu Ekawati
Keyword(s):  
Protein Content ◽  
Water Content ◽  
Wheat Flour ◽  
Fat Content ◽  
Ash Content ◽  
Fiber Content ◽  
Green Bean ◽  
Crude Fiber ◽  
Crude Fiber Content ◽  
Bean Flour

This aims of this research was to know the effect of comparison between green bean flour and wheat flour on characteristic of analogue meatball and to know the right comparison of green bean flour and wheat flour to produce analogue meatball with the best characteristics. The design used in this research was completely randomized design (CRD) with the comparison between green bean flour and wheat flour i.e. (70 g :30 g), (60 g :40 g), (50 g :50 g), (40 g :60 g), and (30 g :70 g). Data were analysed by analysis of variance, followed by Duncan test. The result of this research showed that the comparison between green bean flours and wheat flour had no real effect on water content and aroma of analogue meatball, but significant effects were found on ash content, protein content, fat content, crude fiber content, texture, sensory characteristic such as color, flavour, texture, and overall acceptance of analogue meatball. The best characteristic of analogue meatball was comparison between green bean flour and wheat flour 30 g : 70 g i.e. 59.00 percent of water content, 1.34 percent of ash content, 6.88 percent of protein content, 1.77 percent of fat content, 1.77 percent of crude fiber content, level of elasticity 6.38 N, color (liked), aroma (neutral), texture (liked) with chewy characteristics, with the taste is rather not typical of green beans and liked, and overall acceptance (liked).

scholarly journals STUDY OF GELATIN FROM DUCK BONE AS AN ALTERNATIVE SOURCES OF HALAL GELATIN

2020 ◽  
Vol 10 (1) ◽  
pp. 1
Author(s):  
Muhammad Habbib Khirzin
Keyword(s):  
Hydrochloric Acid ◽  
Physicochemical Properties ◽  
Protein Content ◽  
Water Content ◽  
Extraction Method ◽  
Extraction Process ◽  
Ash Content ◽  
Acid Extraction ◽  
Alternative Sources

Gelatin is an intermediate ingredient which is oftenly used in many field such as food, pharmacy, and cosmetics. It is usually extracted from pig and cow. Halal issue of gelatin sources and the outbreaks of mad cow diseases encouraged people to find an alternative sources of gelatin. One of the alternative sources of gelatin was duck bone. The aim of this research was to describe physicochemical properties of duck bone gelatin which is extracted by using acid extraction method as an alternative sources of halal gelatin. The extraction of duck bone gelatin used 5% concentration of HCl (hydrochloric acid). The extraction process consisted of four steps, they were degreassing, defating, demineralization, and acid extraction. The result showed that gelatin which was extracted from duck bone had these several characteristic: yield of 6.24%, pH 4.0, water content of 13.43%, ash content of 13.42%, protein content of 65.43%, and whiteness degree of 30.35%. Generally, gelatin which was extracted from duck bone had similar characteristic with commercial gelatin and SNI standard. Further researcher had been suggested to reoptimized extraction method in order to reduce ash content.

Sign in / Sign up

Export Citation Format

Share Document