Turbocharger Turbine Rotor Design for Low U/C Values

2019 ◽  
Author(s):  
Hua Chen ◽  
Yuchao Song ◽  
Aiguo Gu ◽  
Yangfang Zhang ◽  
Hongwei Li
Keyword(s):  
Internal Combustion Engines ◽  
Mechanical Design ◽  
Turbine Rotor ◽  
Expansion Ratio ◽  
Test Results ◽  
Rotor Design ◽  
A Value ◽  
Emission Regulations ◽  
Blade Tip ◽  
C Value

Abstract Emission regulations worldwide demand better low-end torque from internal combustion engines. This pushes the operating condition of turbocharger turbine to lower U/C values, where U is the blade tip speed and C is the turbine isentropic spouting velocity which increases with turbine expansion ratio. Traditional radial and some mixed flow turbines, dictated by their rotor design, have their efficiency peaks at U/C value around 0.70, a value considerably larger than desired. In this paper, we deliberate the measures to shift the peak efficiency of turbine rotor toward a lower U/C value than 0.7. The underlying physics of these measures are first explained, CFD and test results where available are then given. Implications to mechanical design, manufacturing and others are also discussed. Finally, an example of a turbine rotor design is given implementing these measures. Test results showed better efficiency was obtained from the design at lower U/C values than from the baseline.

scholarly journals PSII-22 Comparison of the meat quality traits of crossbred pigs and the Large Black pigs

2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 241-242
Author(s):  
Yongjie Wang ◽  
Keshari Thakali ◽  
Sarah Shelby ◽  
Jason Apple ◽  
Yan Huang
Keyword(s):  
Meat Quality ◽  
Genomic Diversity ◽  
Longissimus Dorsi ◽  
Rna Seq ◽  
Longissimus Dorsi Muscle ◽  
A Value ◽  
Dorsi Muscle ◽  
Body Weights ◽  
C Value ◽  
Crossbred Pigs

Abstract The purpose of this study was to compare the meat quality and genomic differences between cross-bred commercial pig (CP) and domestic Large Black pig (BP). Seven cross-bred commercial pigs and eight British Large Black pigs were assigned to CP group and BP group, with initial mean body weights of 18.82±1.412 kg for CP group and 23.31±1.935 kg for BP group, P = 0.061, and fed ad libitum. The final BW of the CP at d101 was similar to the BP (130.0±8.16 kg vs. 121.1±2.80 kg, P = 0.132). However, the BP group took 108 days to reach the final BW. The ADG in the CP was higher than BP (1.102±0.0599 kg vs. 0.905±0.0138 kg, P = 0.003). The hot carcass weight of CP was higher (P < 0.01) than BP, but the backfat of BP was higher (P < 0.01) than CP. The a* value of CP was higher (P < 0.05) than BP, and the c* value of CP was tended to be higher (P < 0.10) than BP. However, the h value of BP was higher (P < 0.05) than CP. The longissimus dorsi muscle fat content of BP was higher (P < 0.05) than CP. For the fatty acid composition, the SFA and MUFA of BP were higher (P < 0.05) than CP, but the PUFA of CP was higher (P < 0.05) than BP. The metmyoglobin content of CP was tended to be higher (P < 0.10) than BP. For the meat metabolism, the oxygen consumption of longissimus dorsi muscle of BP was higher (P < 0.01) than CP. The RNA-Seq data showed that the expression of the genes related to lipid metabolism is higher in BP (fold change > 3, P < 0.05). To conclude, BP has higher meat quality, while CP has its advantages in growth performance. And the differences between these two breeds may due to the genomic diversity.

scholarly journals An Experimental Characterization of TORVEastro, Cable-Driven Astronaut Robot

Robotics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 21
Author(s):  
Francesco Samani ◽  
Marco Ceccarelli
Keyword(s):  
Mechanical Design ◽  
Vision System ◽  
Service Robot ◽  
Test Results ◽  
Operation Performance ◽  
Space Applications ◽  
Outdoor Space ◽  
Motion Characteristics ◽  
Three Degree Of Freedom

TORVEastro robot design is presented with a built prototype in LARM2 (Laboratory of Robot Mechatronics) for testing and characterizing its functionality for service in space stations. Several robot astronauts are designed with bulky human-like structures that cannot be convenient for outdoor space service in monitoring and maintenance of the external structures of orbital stations. The design features of TORVEastro robot are discussed with its peculiar mechanical design with 3 arm-legs as agile service robot astronaut. A lab prototype is used to test the operation performance and the feasibility of its peculiar design. The robot weighs 1 kg, and consists of a central torso, three identical three-degree of freedom (DoF) arm–legs and one vision system. Test results are reported to discuss the operation efficiency in terms of motion characteristics and power consumption during lab experiments that nevertheless show the feasibility of the robot for outdoor space applications.

Investigation of a Rotor Blade With Tip Cooling Subject to a Nonuniform Temperature Profile

2021 ◽  
Vol 143 (7) ◽  
Author(s):  
Harika S. Kahveci
Keyword(s):  
Temperature Profile ◽  
Turbine Blade ◽  
Numerical Study ◽  
Turbine Rotor ◽  
Inlet Temperature ◽  
Pressure Side ◽  
Engine Operation ◽  
Pressure Losses ◽  
Blade Tip ◽  
Temperature Levels

Abstract One of the challenges in the design of a high-pressure turbine blade is that a considerable amount of cooling is required so that the blade can survive high temperature levels during engine operation. Another challenge is that the addition of cooling should not adversely affect blade aerodynamic performance. The typical flat tips used in designs have evolved into squealer form that implements rims on the tip, which has been reported in several studies to achieve better heat transfer characteristics as well as to decrease pressure losses at the tip. This paper demonstrates a numerical study focusing on a squealer turbine blade tip that is operating in a turbine environment matching the typical design ratios of pressure, temperature, and coolant blowing. The blades rotate at a realistic rpm and are subjected to a turbine rotor inlet temperature profile that has a nonuniform shape. For comparison, a uniform profile is also considered as it is typically used in computational studies for simplicity. The effect of tip cooling is investigated by implementing seven holes on the tip near the blade pressure side. Results confirm that the temperature profile nonuniformity and the addition of cooling are the drivers for loss generation, and they further increase losses when combined. Temperature profile migration is not pronounced with a uniform profile but shows distinct features with a nonuniform profile for which hot gas migration toward the blade pressure side is observed. The blade tip also receives higher coolant coverage when subject to the nonuniform profile.

scholarly journals Kemampuan Lulusan Sekolah Tinggi Pariwisata Ampta Dalam Menghadapi Persaingan Di Dunia Kerja

Media Wisata ◽  
2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Sri Larasati
Keyword(s):  
Communication Skill ◽  
Total Population ◽  
Sampling Technique ◽  
Regression Equations ◽  
Test Results ◽  
A Value ◽  
The Face ◽  
Job Competition ◽  
Sampling Approach

The purpose of this research is to know wtether knowledge, skill, responsiveness and communication skill influence in job competition for graduate student from Sekolah Tinggi Pariwisata AMPTA. The population in this study are student pf Sekolah Tinggi Pariwisata SMPTA that graduated in 2013 until 2016, the total population in this studt is 702 and 200 respondents who have worked taken as samples, samples were taken with non probability sampling technique and accidental sampling approach. Sampling approach using regression equations obtained results that through test results F (regression analysis jointly) may note that the value of F = 147.104 count with the significance of 0.000 < 0.05. The test results of the test F reinforced with testing the determination of the coefficient that shows the value of 74.6%) (0.746. From Test t (partially) can result in variable knowledge with a value of t = 3,173 and significance of the value 0002 < 0.05, variable skill with a value of t = 2,949 and value the significance of 0.004 < 0.05, variable attitude with a value of t = 2,688 and value the significance of 0.008 < 0.05, variable communication skill with a value of t = value and significance of 4,497 0000 < 0.05. From the above results can be known that the hypothesis posed was not proven in other words that all of these variables can be said to have a positive and significant effect simultaneously as well as partial toward the ability of STP graduates AMPTA in the face of competition in the world of work

scholarly journals Customer-Based Brand Equity, Product Quality, Price and Customer Loyalty in Electronic Industry of Refrigerator

2021 ◽  
Vol 2 (6) ◽  
pp. 2143-2154
Author(s):  
Bambang Suwarno
Keyword(s):  
Product Quality ◽  
Multiple Regression ◽  
Brand Equity ◽  
Customer Loyalty ◽  
Test Results ◽  
A Value ◽  
Library Research ◽  
Product Service ◽  
Quality Product ◽  
Survey Results

The purpose of this study was to analyse the extent of Consumer-Based Brand Equity, Quality Product and Price affects customer loyalty at PT. Panasonic Gobel Indonesia Branch Medan and to compare the theories. The author examined by collecting data using a variety of library research, questionnaires are structured as an instrument to obtain quantitative data with Likert-scale systems are distributed to 68 respondents. Data was then compiled then processed and analysed using multiple regression analysis techniques (multiple regression) through the test of validity, test of reliability and test of classic assumptions. By using the tools of Statistical Product Service Solutions program (SPSS version 22.0). From the survey results revealed that the influential Consumer-Based Brand Equity, Product Quality and Price simultaneously with the results Fhitung 18,457 > Ftabel 2,75 and probability sig. 0,000 < 0,05 then reject ho (accept hi) that the Consumer-Based Brand Equity, Product Quality, Price simultaneously significantly influence Customer Loyalty PT. Panasonic Gobel Indonesia Branch Medan. The Consumer-Based Brand Equity there is for the partial influence on the Customer Loyalty with a value of thitung 3,980 > ttabel 1,997 and sig. 0,000 < 0,05, the Product Quality there is for the partial influence on the Customer Loyalty with a value of thitung 3,874 > ttabel 1,997 and sig. 0,000 < 0,05 and the Price there is for the partial influence on the Customer Loyalty with a value of thitung 2,483 > ttabel 1,997 and sig. 0,002 < 0,05. From the test results are also obtained by the value of determination R square is 0,564 or 56,4%. It is claimed that Consumer-Based Brand Equity, Product Quality and Price is an excellent way to improve Customer Loyalty and also the hypothesis that the authors proposed previously received.

scholarly journals HUBUNGAN ACCESS BLOCK DENGAN PERBURUKAN KONDISI PASIEN DI INSTALASI GAWAT DARURAT RSUD ULIN BANJARMASIN

2020 ◽  
Vol 11 (1) ◽  
pp. 110-119
Author(s):  
Julianto Julianto ◽  
Izma Daud ◽  
Sari Milyati
Keyword(s):  
Research Method ◽  
Sampling Technique ◽  
P Value ◽  
Test Results ◽  
Hospital Emergency ◽  
Cross Sectional ◽  
Analytical Design ◽  
A Value ◽  
Relationship Of ◽  
The Relationship

Abstrak  Latar Belakang :Access block adalah situasi dimana pasien yang mengalami lama rawat di IGD 6 karena kurangnya akses ke ruang rawat inap dan kepadatan jumlah pasien yang tidak terkendali, dampaknya ditemukan bahwa semakin lama access block  semakin tinggi pula perburukan pasien dalam 24 jam.Tujuan : ini bertujuan untuk mengetahui hubungan access block dengan perburukan kondisi pasien di Instalasi Gawat Darurat RSUD Ulin Banjarmasin.Metode :Penelitian menggunakan desain analitik dengan pendekatan cross sectional. Jumlah sampel yang diambil berjumlah 40 orang dengan teknik pengambilan accidental sampling. Analisis data melalui uji spearman rank.Hasil : Hasil uji dipapatkan nilai p hitung 0,000 (0,05) ada hubungan antara access block dengan perburukan kondisi pasien di instalasi gawat darurat RSUD Ulin Banjarmasi.Simpulan: Berdasarka hasil penelitian Ada hubungan antara access block dengan perburukan kondisi pasien di Instalasi Gawat Darurat RSUD Ulin Banjarmasin dengan nilai P= 0,000 nilai α = 0,05 dengan nilai koefisien korelasi 0,588 Kata kunci: Access Block, Perburukan Pasien. Abstract Background :Access block is a situation where patients who experience length of stay in the ED 6 due to lack of access to the inpatient room and uncontrolled density of patients, it is found that the longer the access block the higher the deterioration of patients in 24 hours.Purpose: This study aims to determine the relationship of access block with deteriorating condition of patients in Emergency Installation Ulin Hospital Banjarmasin.Method : The research method uses an analytical design with a cross sectional approach. The number of samples taken is 40 people using the accidental sampling technique. Data analysis through spearman rank test.Result: The test results obtained p value calculated 0,000 (0.05) there is a relationship between the access block and deterioration of the patient's condition at the Ulin Banjarmasin Hospital emergency department.Conclusion: Based on the results of the study, there is a relationship between the access block and the worsening of the patient's condition at the Emergency Department of RSUD Ulin Banjarmasin with a value of P = 0.000 value α = 0.05 with a correlation coefficient value of 0.588. Keywords: Access Block, Patient worsening 

scholarly journals Pengaruh Lokasi Geografis dan Vegetasi terhadap Sifat Fisikokimia Madu dari Ciwidey dan Bogor

2020 ◽  
Vol 1 (2) ◽  
pp. 71
Author(s):  
Emanuela Rae Alodia ◽  
Anas Bunyamin ◽  
Efri Mardawati
Keyword(s):  
Physicochemical Properties ◽  
Water Content ◽  
Sugar Content ◽  
Geographical Location ◽  
B Value ◽  
Reducing Sugar ◽  
National Standard ◽  
Color Analysis ◽  
A Value ◽  
C Value

<p><em>Physicochemical properties are one of the parameters of honey quality that impacts the sales of honey as well as the economy condition of the society in Ciwidey and Bogor. The physicochemical properties of honey are significantly influenced by the origin of the honey, including its geographical location and vegetation. This study aims to determine the physicochemical properties between multiflora honey from Ciwidey and Bogor with different source of nectar where Ciwidey honey is dominated by calliandra nectar while Bogor honey is dominated by kapok nectar. Data were analyzed with descriptive and quantitative method using independent t test for data with normal distribution (water content and reducing sugar content). Data that were not normally distributed (color analysis and acidity value) were tested non-parametrically with the Mann Whitney-U. The results showed that Bogor honey has the better physicochemical properties and meets Indonesian National Standard (Standar Nasional Indonesia, SNI) 8664:2018, with a water content of 15.15% w/w, L* values of 35.26, a* value of 28.66, b* value of 59.46, c* value of 66.01, h* value of 64.27°, reducing sugar content of 78.78% and acidity value of 35.56 mL NaOH kg-1. Phytochemical screening showed positive results on alkaloid, flavonoid, phenol and tannin, and the results of GC-MS analysis showed three significant compounds which are hydroxymethylfurfural of 48.26%, levoglucosan of 13.58% and ammonium carbamate of 9.18%.</em></p>

scholarly journals The Effect Of Counseling On The Adherence Of Therapeutic Hypertension Patients

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Gita Sekar Prihanti ◽  
Novi Puspita Sari ◽  
Nur Indah Septiani ◽  
Laura Putri Risty L. Tobing ◽  
Annisa Rahayu Adrian ◽  
...  
Keyword(s):  
Family Support ◽  
Statistical Tests ◽  
Adherence Rate ◽  
Test Results ◽  
A Value ◽  
Significant Difference ◽  
Post Test ◽  
Lifestyle Education ◽  
Nonparametric Statistical ◽  
Adherence To Therapy

Failure of therapy is a result of bad adherence  medication. Non-adherence to therapy is a major factor that is suspected to result in uncontrolled blood pressure in hypertensive patients resulting in more serious complications. Therefore it is important to increase the adherence rate of treatment in patients with hypertension in the treatment process. For this reason, the need for interventions to improve  adherence  with several aspects that can be changed. This study uses One Group Pretest-Posttest Design using 100 samples. Data derived from questionnaires containing 25 items of adherence to therapy, 5 items of knowledge, 4 items of trust, 3 items of motivation, 10 items of family support with nonparametric statistical tests used were Mc Nemar test. Mc Nemar test results indicate that there is a significant difference between adherence at the pre-test and at the post-test after counseling with a significance value (p = 0,000). The results also showed that there was a difference in knowledge with a significance value (p = 0.001), motivation with a value (p = 0.031) and family support with a value (p = 0,000). The education with counseling about knowledge, trust, motivation and family support is effective in increasing compliance. There are other changeable factors such as lifestyle education, patient doctor relationships, and the use of smartphone applications for self-reported therapy can improve adherence in patients thereby minimizing therapy failure. Other educational methods that can be used besides counseling are counseling and dissemination of social media information.

scholarly journals Pengaruh Kualitas Pelayanan Terhadap Kepuasan Pelanggan PT. Langit Membiru Wisata Bogor

PARAMETER ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 38-49
Author(s):  
Rini Ardista
Keyword(s):  
Customer Satisfaction ◽  
Service Quality ◽  
T Test ◽  
Primary Data ◽  
Test Results ◽  
A Value ◽  
Primary Data Source ◽  
Data Source

This research aims to determine and analyze the effect of service quality on customer satisfaction of PT. Langit Membiru Wisata Bogor, to find out how big the influence and relationship between service quality and customer satisfaction. The sample used was 100 respondents taken through t-test or interviews, observations, and questionnaires at PT. Langit Membiru Wisata Bogor and the primary data source processed with SPSS 25. The t-test results show the effect of service quality on customer satisfaction, this is evidenced by the variable (X) service quality and variable (Y) customer satisfaction has a value less than 0.05, namely (0.00 <0.05), this is proven with the value in the t test obtained t count 91.624> t table 5.293, so it can be concluded that the hypothesis can be accepted. Abstrak Penelitian ini bertujuan untuk mengetahui dan menganalisis pengaruh kualitas pelayanan terhadap kepuasan pelanggan PT. Langit Membiru Wisata Bogor, untuk mengetahui seberapa besar pengaruh dan hubungan antara kualitas pelayanan dengan kepuasan pelanggan. Sampel yang digunakan adalah 100 responden yang diambil melalui uji-t atau wawancara, observasi, dan angket pada PT. Langit Membiru Wisata Bogor dan sumber data primer diolah dengan SPSS 25. Hasil uji t menunjukkan adanya pengaruh kualitas pelayanan terhadap kepuasan pelanggan, hal ini dibuktikan dengan variabel (X) kualitas pelayanan dan variabel (Y) kepuasan pelanggan memiliki nilai lebih kecil dari 0,05 yaitu (0,00 < 0,05) hal ini terbukti dengan nilai pada uji t diperoleh t hitung 91,624 > ttabel 5,293, sehingga dapat disimpulkan bahwa hipotesis dapat diterima.

scholarly journals EKSTRAK KARAGINAN RUMPUT LAUT (Eucheuma cottonii) YANG DIPEROLEH DARI PANTAI TABLOLONG

2021 ◽  
Vol 3 (3) ◽  
pp. 119-127
Author(s):  
Runa Matias Ruku ◽  
Alfred G.O Kase ◽  
Hartini R.L Solle
Keyword(s):  
Fat Content ◽  
Ash Content ◽  
Test Results ◽  
A Value ◽  
Randomized Design ◽  
Yield Test ◽  
Completely Randomized Design ◽  
Quantitative Descriptive ◽  
Treatment Concentration

ABSTRACTEucheuma cottonii (E. cottonii) seaweed is a low level plant that has a high nutritional value. One of the ingredients that play a role in the formation of texture is carrageenan.Carrageenan is a type of hydrocolloid extracted from the seaweed of the red algae group (Rhodophyceae). The purpose of this study was to determine the quality of yields of Seaweed Carrageenan Extract (E. cottonii) obtained from Tablolong beach in the form of yield, ash content and fat content. The method used in this study is an experimental method with a completely randomized design (CRD) and for fat testing using quantitative descriptive methods. This study uses various concentrations of 0.1 N KOH, 0.2 N KOH, 0.3 N KOH and 0.4 N KOH. The results of the carrageenan yield test show that the addition of 0.1 N KOH concentration has a value of 56.10, KOH 0 , 2 N 62.16, KOH 0.3 N 72.73 and the best treatment was at P4 KOH 0.4 N 80.90. Carrageenan ash content test results showed that the addition of KOH concentration value obtained P1 KOH 0.1 N was 60.50, P2 KOH 0.2 N was 70.70, P3 KOH 0.3 N was 80.50, and P4 KOH 0.4 with a value of 90.50. The results of the carrageenan fat content of 0.1 KOH treatment has a fat content of 0, 2 while the treatment of KOH 0,2, KOH 0,3, KOH 0,4 have no fat content by showing the value (0). The results showed that the highest yield in the treatment of KOH concentration of 0.4 N with a value 80.95% and carrageenan ash content has the highest value in the treatment concentration of 0.4 N with a value of 90.50% while the fat content has a value of 0.2 in the treatment of KOH concentration of 0.1 N Keywords: Carrageenan, extract of E. cottonii seaweed.

Sign in / Sign up

Export Citation Format

Share Document