Energy index of working units abrasion of agricultural machinery in contact with abrasives

10.12737/2434 ◽  
2014 ◽  
Vol 8 (4) ◽  
pp. 55-60
Author(s):  
Белинский ◽  
Aleksandr Belinskiy ◽  
Семушкин ◽  
Nikolay Semushkin ◽  
Зиганшин ◽  
...  
Keyword(s):  
Technology Development ◽  
Efficient Production ◽  
Energy Index ◽  
Agricultural Machinery ◽  
Sample Attrition ◽  
Wide Range ◽  
The Russian Federation ◽  
Energy Saving Technology ◽  
Selection For ◽  
Agricultural Machines

One of the priority directions of science and technology development in the Russian Federation are: energy efficiency, energy saving, technology of energy-efficient production. In the agriculture the most energy-intensive processes are in tillage, shredded stems by fodder chopper machines and etc. The working units of agricultural machinery exposed to abrasion, which leads to mechanical wear of the material, that occurs as a result of cutting and scratching action on him solids in free or clamped. The obtained formula for determining the energy index of the sample is a rational, because it is derived from the laws of mechanics. The proposed methodology and the resulting energy abrasion index is recommended for the calculation of required energy for wear, when determining the reliability and life of the working units of the various machines, interacting with an abrasive material. The numerical values of the energy index of the sample of working unit abrasion some agricultural machines are in a wide range from 0.416 kJ per kilogram in the spiral of equalizer roller of tillage machines to 1.716 to kJ per kilogram in the tooth of harrows BZS-1.0. The device is suitable for the determination by express - method (the duration of control time on sample attrition is 10 times smaller than a standard device) power indicator abrasion of tested materials in their selection for the production of cheaper and more wear-resistant working units of agricultural machinery, as well as after heat treatment, sputtering work surfaces by wearproof materials.

FORECASTING MIGRATION FLOWS USING PREDICTIVE ANALYTICS

2020 ◽  
pp. 45-54
Author(s):  
Yulia V. Paukova ◽  
◽  
Konstantin V. Popov ◽  
Keyword(s):  
Information Technologies ◽  
Predictive Analytics ◽  
Migration Policy ◽  
Modern World ◽  
Migration Activity ◽  
Wide Range ◽  
Future Events ◽  
The Russian Federation ◽  
Migration Flows ◽  
Develop State

The present article considers the need to predict migration flows using Predictive Analytics. The Russian Federation is a center of migration activity. The modern world is changing rapidly. An effective migration policy requires effective monitoring of migration flows, assessing the current situation in our and other countries and forecasting migration processes. There are information systems in Russia that contain a wide range of information about foreign citizens and stateless persons that provide the requested information about specific foreign citizens, including grouping it on various grounds. However, it is not possible to analyze and predict it automatically using thousands of parameters. Special attention in Russia is paid to digitalization. Using information technologies (artificial intelligence, machine learning and big data analysis) to forecast migration flows in conditions of variability of future events will allow to take into account a number of events and most accurately predict the quantitative and so-called "qualitative" structure of arrivals. The received information will help to develop state policy and to take appropriate measures in the field of migration regulation. The authors come to the conclusion that it is necessary to amend existing legal acts in order to implement information technologies of Predictive Analytics into the practice of migration authorities.

AISI 1566

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1566 is a high-carbon (nominally 0.66% carbon) steel containing 0.85-0.15% manganese. Its hardenability is low and on austenitizing and liquid quenching it develops a hard (martensitic) surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for a wide range of applications. It has good machinability and good workability. Its many uses include springs, shafts, hand tools, railway parts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-100. Producer or source: Carbon steel mills.

THE VALUE OF LOVE IN THE SYSTEM OF FORMATION OF THE PROFESSIONAL MATURITY OF THE EDUCATOR

2020 ◽  
Vol 1 (10(79)) ◽  
pp. 12-18
Author(s):  
G. Bubyreva
Keyword(s):  
Russian Federation ◽  
The State ◽  
Educational Process ◽  
Wide Range ◽  
The Family ◽  
The Russian Federation ◽  
The Government ◽  
The Individual ◽  
The Right

The existing legislation determines the education as "an integral and focused process of teaching and upbringing, which represents a socially important value and shall be implemented so as to meet the interests of the individual, the family, the society and the state". However, even in this part, the meaning of the notion ‘socially significant benefit is not specified and allows for a wide range of interpretation [2]. Yet the more inconcrete is the answer to the question – "who and how should determine the interests of the individual, the family and even the state?" The national doctrine of education in the Russian Federation, which determined the goals of teaching and upbringing, the ways to attain them by means of the state policy regulating the field of education, the target achievements of the development of the educational system for the period up to 2025, approved by the Decree of the Government of the Russian Federation of October 4, 2000 #751, was abrogated by the Decree of the Government of the Russian Federation of March 29, 2014 #245 [7]. The new doctrine has not been developed so far. The RAE Academician A.B. Khutorsky believes that the absence of the national doctrine of education presents a threat to national security and a violation of the right of citizens to quality education. Accordingly, the teacher has to solve the problem of achieving the harmony of interests of the individual, the family, the society and the government on their own, which, however, judging by the officially published results, is the task that exceeds the abilities of the participants of the educational process.  The particular concern about the results of the patriotic upbringing served as a basis for the legislative initiative of the RF President V. V. Putin, who introduced the project of an amendment to the Law of RF "About Education of the Russian Federation" to the State Duma in 2020, regarding the quality of patriotic upbringing [3]. Patriotism, considered by the President of RF V. V. Putin as the only possible idea to unite the nation is "THE FEELING OF LOVE OF THE MOTHERLAND" and the readiness for every sacrifice and heroic deed for the sake of the interests of your Motherland. However, the practicing educators experience shortfalls in efficient methodologies of patriotic upbringing, which should let them bring up citizens, loving their Motherland more than themselves. The article is dedicated to solution to this problem based on the Value-sense paradigm of upbringing educational dynasty of the Kurbatovs [15].

The development of information interaction as a key element of state risk management and health protection

2020 ◽  
pp. 68-76
Author(s):  
S. Voronkova
Keyword(s):  
Risk Factors ◽  
Health Promotion ◽  
Information System ◽  
Information Interaction ◽  
New Information ◽  
Wide Range ◽  
Working Age ◽  
The Russian Federation ◽  
Working Age Population ◽  
Types Of Information

The article discusses ways to obtain information about risk factors and the health status of the population. The article describes a new information system «labor Medicine», which allows to organize the collection of a wide range of data for further analysis and application in the activities of various Executive authorities, public organizations, foundations, legal entities and citizens. It is proposed to improve this system by expanding the types of information collected, creating a passport for health promotion organizations, as well as integration with systems that are being implemented in the Russian Federation for managing the health of the working-age population in the context of state policy in the field of Informatization.

Safety assessment of biological raw materials in the system of medicines quality assurance

2020 ◽  
pp. 63-72
Author(s):  
Yu. Olefir ◽  
E. Sakanyan ◽  
I. Osipova ◽  
V. Dobrynin ◽  
M. Smirnova ◽  
...  
Keyword(s):  
Raw Materials ◽  
State Level ◽  
The State ◽  
Spongiform Encephalopathy ◽  
Safety Standards ◽  
Wide Range ◽  
The Russian Federation ◽  
Key Aspects ◽  
First Time ◽  
Medicines Quality

The entry of a wide range of biotechnological products into the pharmaceutical market calls for rein-forcement of the quality, efficacy and safety standards at the state level. The following general monographs have been elaborated for the first time to be included into the State Pharmacopoeia of the Russian Federation, XIV edition: "Viral safety" and "Reduction of the risk of transmitting animal spongiform encephalopathy via medicinal products". These general monographs were elaborated taking into account the requirements of foreign pharmacopoeias and the WHO recommendations. The present paper summarises the key aspects of the monographs.

NEW APPROACHES TO THE ORGANIZATIONAL AND TECHNICAL SUPPORT OF THE EXAMINATION OF COMPETITIVE APPLICATIONS FOR STATE SUPPORT IN THE FORM OF GRANTS OF THE PRESIDENT OF THE RUSSIAN FEDERATION TO YOUNG RUSSIAN SCIENTISTS – DOCTORS OF SCIENCES AND PHILOSOPHY DOCTORS (DOCTORS AND Ph. D.) AND LEADING SCIENTIFIC SCHOOLS

2020 ◽  
pp. 59-67
Author(s):  
N.A. Mironov ◽  
E.A. Maryshev ◽  
N.A. Divueva
Keyword(s):  
Information System ◽  
Russian Federation ◽  
Technical Support ◽  
Examination System ◽  
State Support ◽  
New Approaches ◽  
Wide Range ◽  
Integrated Information System ◽  
The Russian Federation ◽  
Integrated Information

The article discusses the issues of improving the examination system of competitive applications for state support in the form of grants of the President of the Russian Federation on the basis of an integrated information system that includes the information support system of the Grants Council of the President of the Russian Federation and the information system of the Federal Roster of Scientific and Technological Experts and containing information about experts, applications and expert examination results. In order to improve the principles of transparency and openness of support programs and competition winners, to ensure the objectivity of the competitive selection of projects, a number of organizational and technical solutions are proposed in the application examination system based on an integrated information system. The new and proposed new approaches to the organizational and technical support of the examination of competitive applications for state support in the form of grants of the President of the Russian Federation to young Russian scientists made it possible, by attracting a wide range of scientific and technological communities, to conduct examination of more than five thousand applications with high quality and deadlines set by the Ministry of Education and Science of Russia.

Strategies of maintenance and repair of agricultural machinery

2020 ◽  
pp. 38-48
Author(s):  
Aleksey S. Dorokhov ◽  
Aleksandr V. Denisov ◽  
Aleksey A. Solomashkin ◽  
Valeriy S. Gerasimov
Keyword(s):  
Wear Rate ◽  
Technical Condition ◽  
Research Purpose ◽  
Agricultural Machinery ◽  
Maintenance And Repair ◽  
Wear Rates ◽  
Urgent Task ◽  
Machine Parts ◽  
Current Value ◽  
Agricultural Machines

Modern machines are subject to progressive wear that occurs at different rates, which leads to unpredictable failures that reduce the reliability and durability of machines. The strategy of maintenance and repair is aimed at eliminating these problems. (Research purpose) The research purpose is in analyzing the basic principles of the strategy of maintenance and repair of agricultural machinery in order to ensure control of the technical condition of machine parts. (Materials and methods) When resource diagnostics is used, , the allowable value of the parameter is set in advance for a part . This value is the tolerance that corresponds to a certain wear rate of the part. The tolerance is set based on the condition that if the current value of the controlled resource parameter during the next diagnosis is less than the set value, then such a part at the current value of the wear rate can be finalized until the next inter-control check. Taking into account the wear rate of the same type of parts from the group when determining the allowable wear during their resource diagnostics becomes an urgent task. (Results and discussions) As a result of research, the article presents "Methodology for determining the main indicators of reliability of parts of agricultural machines with different wear rates" and "Methodology for determining the tolerance system of parts of agricultural machines with different wear rates". (Conclusions) The article presents the tolerance system that reduces the probability of failure of machine parts in operation. During resource diagnostics, those parts whose resource parameters exceed the tolerance are rejected.

Unified approach to spatial description of objects terrain departmental registries / cadastres as a perspective basis of the state system territory mapping

2019 ◽  
Vol 942 (12) ◽  
pp. 41-49
Author(s):  
A.M. Portnov
Keyword(s):  
Spatial Data ◽  
Spatial Description ◽  
Unified Approach ◽  
Technological Basis ◽  
The Public ◽  
Wide Range ◽  
The Russian Federation ◽  
Map Data ◽  
Consistency Verification ◽  
Thematic Data

Using unified principles of formation and maintenance of register/cadaster with information about spatial data of landscape objects as the informational and technological basis for updating the public topographic maps and modernization of state cartographic system is proposed. The problems of informational relevancy of unified electronical cartographic basis and capacity of its renovation in case of public cadaster map data. The need to modernize the system of classification and coding of cartographic information, the use of unified standards for the coordinate description of register objects for their topological consistency, verification and updating is emphasized. Implementing such solutions is determined by economical expediency as well as necessity of providing a variety of real thematic data for wide range of consumers in the field of urban planning, territories development and completing the tasks of Governmental program “Digital economy of the Russian Federation”.

scholarly journals Applications of Discrete Element Method in the Research of Agricultural Machinery: A Review

Agriculture ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 425
Author(s):  
Hongbo Zhao ◽  
Yuxiang Huang ◽  
Zhengdao Liu ◽  
Wenzheng Liu ◽  
Zhiqi Zheng
Keyword(s):  
Discrete Element Method ◽  
Discrete Element ◽  
Agricultural Machinery ◽  
Design And Optimization ◽  
Design Of Agricultural Machinery ◽  
Agricultural Materials ◽  
Operational Processes ◽  
Dem Model ◽  
Agricultural Machines ◽  
Element Method

As a promising and convenient numerical calculation approach, the discrete element method (DEM) has been increasingly adopted in the research of agricultural machinery. DEM is capable of monitoring and recording the dynamic and mechanical behavior of agricultural materials in the operational process of agricultural machinery, from both a macro-perspective and micro-perspective; which has been a tremendous help for the design and optimization of agricultural machines and their components. This paper reviewed the application research status of DEM in two aspects: First is the DEM model establishment of common agricultural materials such as soil, crop seed, and straw, etc. The other is the simulation of typical operational processes of agricultural machines or their components, such as rotary tillage, subsoiling, soil compaction, furrow opening, seed and fertilizer metering, crop harvesting, and so on. Finally, we evaluate the development prospects of the application of research on the DEM in agricultural machinery, and look forward to promoting its application in the field of the optimization and design of agricultural machinery.

scholarly journals UV Nanoimprint Lithography: Geometrical Impact on Filling Properties of Nanoscale Patterns

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 822
Author(s):  
Christine Thanner ◽  
Martin Eibelhuber
Keyword(s):  
Layer Thickness ◽  
Process Parameters ◽  
Nanoimprint Lithography ◽  
Failure Modes ◽  
Production Method ◽  
Efficient Production ◽  
Comprehensive Overview ◽  
Replication Method ◽  
Wide Range ◽  
Pattern Size

Ultraviolet (UV) Nanoimprint Lithography (NIL) is a replication method that is well known for its capability to address a wide range of pattern sizes and shapes. It has proven to be an efficient production method for patterning resist layers with features ranging from a few hundred micrometers and down to the nanometer range. Best results can be achieved if the fundamental behavior of the imprint resist and the pattern filling are considered by the equipment and process parameters. In particular, the material properties and pattern size and shape play a crucial role. For capillary force-driven filling behavior it is important to understand the influencing parameters and respective failure modes in order to optimize the processes for reliable full wafer manufacturing. In this work, the nanoimprint results obtained for different pattern geometries are compared with respect to pattern quality and residual layer thickness: The comprehensive overview of the relevant process parameters is helpful for setting up NIL processes for different nanostructures with minimum layer thickness.

Sign in / Sign up

Export Citation Format

Share Document