scholarly journals THE LEVEL OF PLASTICITY OF THE PHASES IN NON-METALLIC INCLUSIONS WITH A COMPLEX STRUCTURE

2021 ◽  
pp. 19-25
Author(s):  
S.I. GUBENKO
Keyword(s):  
Complex Structure ◽  
Cold Deformation ◽  
Inhibitory Effect ◽  
Practical Significance ◽  
Plastic Behavior ◽  
Metallic Inclusions ◽  
Wide Range ◽  
Different Types ◽  
Deformation Ability ◽  
Composition Structure

Purpose. It is necessary to study of the effect of heterophase inclusions on the technological ductility of steels for various purposes. The goal of the work was to study of the nature and level of plasticity of multiphase inclusions in steels under conditions of hot and cold deformation. Methods. Comprehensive methods for the study of heterophase non-metallic inclusions (metallographic, petrographic, X-ray microanalysis methods) were used. Results. Plastic phases in multiphase inclusions of different types under conditions of hot and cold deformation of steels were investigated. It is shown that each type of multiphase inclusions, which are microcomposite formations in steels, is characterized by its laws of development of deformation processes, which are determined by their chemical and phase composition, structure, deformation ability of the phases of inclusions. Scientific novelty. Peculiarities of plastic behavior of multiphase inclusions of different types are established. The inhibitory effect of non-deformable phases of inclusions on the deformability of plastic phases in a wide range of steel deformation temperatures is established. Peculiarities of the nature of plasticity of multiphase inclusions having different compositions and structure are discussed. Practical significance. Using the results obtained will allow developing technologies for producing steels with regulated content and types of multiphase non-metallic inclusions, which will significantly increase their technological plasticity, as well as prevent the formation of various kinds of defects during the processing of steels by pressure.

scholarly journals Study the Inhibitory effect of Rose and blossom bitter orange flowers extracts against different types of bacteria isolated from the oral cavity

2014 ◽  
Vol 11 (2) ◽  
pp. 795-802
Author(s):  
Baghdad Science Journal
Keyword(s):  
Candida Albicans ◽  
Oral Cavity ◽  
Cold Water ◽  
Inhibitory Effect ◽  
Isolation And Identification ◽  
Active Compounds ◽  
Bitter Orange ◽  
Wide Range ◽  
Different Types ◽  
Amoxicillin Clavulanic Acid

The study in duded isolation and identification of microbial isolates from oral cavity to 10 volunteers, diagnosed within the three groups: Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus spp. and Candida albicans . The sensitivity test of all isolates bacteria Streptococcus spp. , S. aureus and S. epidermidis showed high resistance to Ampicillin(100)%,followed Methicillin (88.88)% and Amoxicillin / clavulanic acid(77.77)%, while the resistance for each of Vancomycin and Amoxicillin were (66.66)%, and the resistance to Erythromycin and Pencillin (55.55)% to each of them. The results showed less resistance to Trimethoprim (22.22)% and Cefalotine (11.11)% of all bacteria isolate. Investigation of the presence of active compounds in each of the hot and cold (water and alcoholic) extracts flowers Rose and flowers blossom bitter orange ( new preparatory 2012) (Alkaloids, Quartet alkaloids, sugars, Saponine, Flavones and comarins ) was carried out includes. While it was all kinds of extracts does not contain resins. The results showed the presence of active compounds (Sugars, Flavones and comarins) in old extracts that preparation after a year (2011). PH values of the plant extracts hot and cold (water and alcoholic) for each of orange flowers blossom and Rose flowers (Old and new preparatory) with a wide range ranging between (3.6 -6.4). All extracts hot and cold (alcoholic) (new preparatory 2012) showed most effective towards Streptococcus spp., S. epidermidis and Candida albicans, while the extracts show weak effective against S. aureus. Hot alcohol extracts of Rose (old preparatory 2011) showed most effective towards S. aureus and S. epidermidis only, while the other extracts of old perpetration show weak effective against Streptococcus spp. and C. albicans.

Nanoparticles Functionalized with Venom-Derived Peptides and Toxins for Pharmaceutical Applications

2020 ◽  
Vol 21 (2) ◽  
pp. 97-109 ◽  
Author(s):  
Ana P. dos Santos ◽  
Tamara G. de Araújo ◽  
Gandhi Rádis-Baptista
Keyword(s):  
Oral Absorption ◽  
Current Data ◽  
Pharmacological Activities ◽  
Venom Peptides ◽  
Essential Components ◽  
Wide Range ◽  
Different Types ◽  
Direct Use ◽  
Animal Venoms ◽  
Pharmaceutical Biotechnology

Venom-derived peptides display diverse biological and pharmacological activities, making them useful in drug discovery platforms and for a wide range of applications in medicine and pharmaceutical biotechnology. Due to their target specificities, venom peptides have the potential to be developed into biopharmaceuticals to treat various health conditions such as diabetes mellitus, hypertension, and chronic pain. Despite the high potential for drug development, several limitations preclude the direct use of peptides as therapeutics and hamper the process of converting venom peptides into pharmaceuticals. These limitations include, for instance, chemical instability, poor oral absorption, short halflife, and off-target cytotoxicity. One strategy to overcome these disadvantages relies on the formulation of bioactive peptides with nanocarriers. A range of biocompatible materials are now available that can serve as nanocarriers and can improve the bioavailability of therapeutic and venom-derived peptides for clinical and diagnostic application. Examples of isolated venom peptides and crude animal venoms that have been encapsulated and formulated with different types of nanomaterials with promising results are increasingly reported. Based on the current data, a wealth of information can be collected regarding the utilization of nanocarriers to encapsulate venom peptides and render them bioavailable for pharmaceutical use. Overall, nanomaterials arise as essential components in the preparation of biopharmaceuticals that are based on biological and pharmacological active venom-derived peptides.

Wetting of glass surface using natural surfactants

2020 ◽  
Vol 12 ◽  
Author(s):  
Nihar Ranjan Biswal
Keyword(s):  
Contact Angle ◽  
Glass Surface ◽  
Pure Water ◽  
Amyl Alcohol ◽  
Synthetic Surfactant ◽  
Wide Range ◽  
Different Types ◽  
Natural Surfactants ◽  
Triton X ◽  
Solid Liquid

Background: Surfactant adsorption at the interfaces (solid–liquid, liquid–air, or liquid–liquid) is receiving considerable attention from a long time due to its wide range of practical applications. Objective: Specifically wettability of solid surface by liquids is mainly measured by contact angle and has many practical importances where solid–liquid systems are used. Adsorption of surfactants plays an important role in the wetting process. The wetting behaviours of three plant-based natural surfactants (Reetha, Shikakai, and Acacia) on the glass surface are compared with one widely used nonionic synthetic surfactant (Triton X-100) and reported in this study. Methods: The dynamic contact angle study of three different types of plant surfactants (Reetha, Shikakai and Acacia) and one synthetic surfactant (Triton X 100) on the glass surface has been carried out. The effect of two different types of alcohols such as Methanol and amyl alcohol on wettability of shikakai, as it shows little higher value of contact angle on glass surface has been measured. Results: The contact angle measurements show that there is an increase in contact angle from 47° (pure water) to 67.72°, 65.57°, 68.84°, and 68.79° for Reetha, Acacia, Shikakai, and Triton X-100 respectively with the increase in surfactant concentration and remain constant at CMC. The change in contact angle of Shikakai-Amyl alcohol mixtures are slightly different than that of methanol-Shikakai mixture, mostly there is a gradual increase in contact angle with the increasing in alcohol concentration. Conclusion: There is no linear relationship between cos θ and inverse of surface tension. There was a linear increase in surface free energy results with increase in concentration as more surfactant molecules were adsorbing at the interface enhancing an increase in contact angle.

Impact of Environmental Degradation on Human Health

2016 ◽  
Vol 3 (1) ◽  
pp. 1 ◽  
Author(s):  
_______ Archana ◽  
Charu Datta ◽  
Pratibha Tiwari
Keyword(s):  
Environmental Degradation ◽  
Human Population ◽  
Environmental Problems ◽  
Population Increase ◽  
Human Beings ◽  
The People ◽  
Wide Range ◽  
Different Types ◽  
Economic Institute ◽  
Day By Day

Degradation of environment is one of the most serious challenges before the mankind in today’s world. Mankind has been facing a wide range of problem arising out of the degradation of environment. Not only the areas under human inhabitation, but the areas of the planet without human population have also been suffering from these problems. As the population increase day by day, the amenities are not improved simultaneously. With the advancement of science and technologies the needs of human beings has been changing rapidly. As a result different types of environmental problems have been rising. Environmental degradation is a wide- reaching problem and it is likely to influence the health of human population is great. It may be defined the deterioration of the environment through depletion of resources such as air, water, and soil. The destruction of ecosystem and extinction of wildlife. Environmental degradation has occurred due to the recent activities in the field of socio-economic, institute and technology. Poverty still remains a problem as the root of several environmental problems to create awareness among the people about the ill effect of environmental pollution. In the whole research it is clear that all factors of environmental degradation may be reduced through- Framing the new laws on environmental degradation, Environment friend policy, Controlling all the ways and means of noise, air, soil and water pollution, Through growing more and more trees and by adapting the proper sanitation policy.  

scholarly journals Portable near Infrared Spectroscopy as a Tool for Fresh Tomato Quality Control Analysis in the Field

2021 ◽  
Vol 11 (7) ◽  
pp. 3209
Author(s):  
Karla R. Borba ◽  
Didem P. Aykas ◽  
Maria I. Milani ◽  
Luiz A. Colnago ◽  
Marcos D. Ferreira ◽  
...  
Keyword(s):  
Citric Acid ◽  
Near Infrared ◽  
Prediction Models ◽  
Quality Attributes ◽  
Internal Quality ◽  
Control Analysis ◽  
Tomato Quality ◽  
Wide Range ◽  
Different Types ◽  
Fresh Tomato

Portable spectrometers are promising tools that can be an alternative way, for various purposes, of analyzing food quality, such as monitoring in a few seconds the internal quality during fruit ripening in the field. A portable/handheld (palm-sized) near-infrared (NIR) spectrometer (Neospectra, Si-ware) with spectral range of 1295–2611 nm, equipped with a micro-electro-mechanical system (MEMs), was used to develop prediction models to evaluate tomato quality attributes non-destructively. Soluble solid content (SSC), fructose, glucose, titratable acidity (TA), ascorbic, and citric acid contents of different types of fresh tomatoes were analyzed with standard methods, and those values were correlated to spectral data by partial least squares regression (PLSR). Fresh tomato samples were obtained in 2018 and 2019 crops in commercial production, and four fruit types were evaluated: Roma, round, grape, and cherry tomatoes. The large variation in tomato types and having the fruits from distinct years resulted in a wide range in quality parameters enabling robust PLSR models. Results showed accurate prediction and good correlation (Rpred) for SSC = 0.87, glucose = 0.83, fructose = 0.87, ascorbic acid = 0.81, and citric acid = 0.86. Our results support the assertion that a handheld NIR spectrometer has a high potential to simultaneously determine several quality attributes of different types of tomatoes in a practical and fast way.

scholarly journals Toxic or Not Toxic, That Is the Carbon Quantum Dot’s Question: A Comprehensive Evaluation with Zebrafish Embryo, Eleutheroembryo, and Adult Models

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1598
Author(s):  
Chih-Yu Chung ◽  
Yu-Ju Chen ◽  
Chia-Hui Kang ◽  
Hung-Yun Lin ◽  
Chih-Ching Huang ◽  
...  
Keyword(s):  
Zebrafish Embryo ◽  
Comprehensive Evaluation ◽  
Aquatic Organisms ◽  
Carbon Quantum Dots ◽  
Adult Zebrafish ◽  
Fish Embryo ◽  
Wide Range ◽  
Different Types ◽  
Low Toxicity

Carbon quantum dots (CQDs) are emerging novel nanomaterials with a wide range of applications and high biocompatibility. However, there is a lack of in-depth research on whether CQDs can cause acute or long-term adverse reactions in aquatic organisms. In this study, two different types of CQDs prepared by ammonia citrate and spermidine, namely CQDAC and CQDSpd, were used to evaluate their biocompatibilities. In the fish embryo acute toxicity test (FET), the LD50 of CQDAC and CQDSpd was about 500 and 100 ppm. During the stage of eleutheroembryo, the LD50 decreased to 340 and 55 ppm, respectively. However, both CQDs were quickly eliminated from embryo and eleutheroembryo, indicating a lack of bioaccumulation. Long-term accumulation of CQDs was also performed in this study, and adult zebrafish showed no adverse effects in 12 weeks. In addition, there was no difference in the hatchability and deformity rates of offspring produced by adult zebrafish, regardless of whether they were fed CQDs or not. The results showed that both CQDAC and CQDSpd have low toxicity and bioaccumulation to zebrafish. Moreover, the toxicity assay developed in this study provides a comprehensive platform to assess the impacts of CQDs on aquatic organisms in the future.

scholarly journals Nanometals-Containing Polymeric Membranes for Purification Processes

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 513
Author(s):  
Anna Rabajczyk ◽  
Maria Zielecka ◽  
Krzysztof Cygańczuk ◽  
Łukasz Pastuszka ◽  
Leszek Jurecki
Keyword(s):  
Synergistic Effects ◽  
Membrane Surface ◽  
Antibacterial Properties ◽  
Polymeric Membranes ◽  
Treatment Processes ◽  
Wide Range ◽  
Different Types ◽  
Type Size ◽  
Titanium Zinc ◽  
Membrane Surface Charge

A recent trend in the field of membrane research is the incorporation of nanoparticles into polymeric membranes, which could produce synergistic effects when using different types of materials. This paper discusses the effect of the introduction of different nanometals such as silver, iron, silica, aluminum, titanium, zinc, and copper and their oxides on the permeability, selectivity, hydrophilicity, conductivity, mechanical strength, thermal stability, and antiviral and antibacterial properties of polymeric membranes. The effects of nanoparticle physicochemical properties, type, size, and concentration on a membrane’s intrinsic properties such as pore morphology, porosity, pore size, hydrophilicity/hydrophobicity, membrane surface charge, and roughness are discussed, and the performance of nanocomposite membranes in terms of flux permeation, contaminant rejection, and antifouling capability are reviewed. The wide range of nanocomposite membrane applications including desalination and removal of various contaminants in water-treatment processes are discussed.

scholarly journals Albizia chinensis bark extract ameliorates the genotoxic effect of cyclophosphamide

2020 ◽  
Vol 44 (1) ◽  
Author(s):  
Marian Nabil ◽  
Entesar E. Hassan ◽  
Neven S. Ghaly ◽  
Fawzia A. Aly ◽  
Farouk R. Melek ◽  
...  
Keyword(s):  
Folk Medicine ◽  
Inhibitory Effect ◽  
Protective Role ◽  
Bark Extract ◽  
Repeated Treatment ◽  
Mouse Bone Marrow ◽  
Sperm Abnormalities ◽  
Wide Range ◽  
Different Doses

Abstract Background The genus Albizia (Leguminoseae) is used in folk medicine for the treatment of a wide range of ailments. Recently, saponins from plant origin have attracted much attention. Saponins are recorded to have a broad range of biological and pharmacological activities. This study was performed to evaluate the protective role of Albizia chinensis bark methanolic extract (MEAC) against the genotoxicity induced by cyclophosphamide (CP) using different mutagenic parameters. Results The results showed that MEAC induced an inhibitory effect against chromosomal aberrations of CP in mouse bone marrow and spermatocytes. Such effect was found to be significant (p < 0.01) with a dose of 100 mg/kg treated once for 24 h and also after repeated treatment at a dose of 25 mg/kg for 7 days. In sperm abnormalities, the protective effect of Albizia extract showed a dose-related relationship. Different doses of MEAC (25, 50, and 100 mg/kg) significantly (p < 0.01) ameliorated sperm abnormalities induced by CP dose-dependently. The percentage of sperm abnormalities was decreased to 5.14 ± 0.72 in the group of animals treated with CP plus MEAC (100 mg/kg) indicating an inhibitory effect of about 50%. Conclusion MEAC at the doses examined was non-genotoxic compared to control (negative) and exhibited a protective role against CP genotoxicity.

scholarly journals Tribological Aspects, Optimization and Analysis of Cu-B-CrC Composites Fabricated by Powder Metallurgy

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4217
Author(s):  
Üsame Ali Usca ◽  
Mahir Uzun ◽  
Mustafa Kuntoğlu ◽  
Serhat Şap ◽  
Khaled Giasin ◽  
...  
Keyword(s):  
Weight Loss ◽  
Wear Rate ◽  
Coefficient Of Friction ◽  
Applied Load ◽  
Practical Significance ◽  
Tribological Characteristics ◽  
M 10 ◽  
Wide Range ◽  
The Coefficient Of Friction ◽  
Four Levels

Tribological properties of engineering components are a key issue due to their effect on the operational performance factors such as wear, surface characteristics, service life and in situ behavior. Thus, for better component quality, process parameters have major importance, especially for metal matrix composites (MMCs), which are a special class of materials used in a wide range of engineering applications including but not limited to structural, automotive and aeronautics. This paper deals with the tribological behavior of Cu-B-CrC composites (Cu-main matrix, B-CrC-reinforcement by 0, 2.5, 5 and 7.5 wt.%). The tribological characteristics investigated in this study are the coefficient of friction, wear rate and weight loss. For this purpose, four levels of sliding distance (1000, 1500, 2000 and 2500 m) and four levels of applied load (10, 15, 20 and 25 N) were used. In addition, two levels of sliding velocity (1 and 1.5 m/s), two levels of sintering time (1 and 2 h) and two sintering temperatures (1000 and 1050 °C) were used. Taguchi’s L16 orthogonal array was used to statistically analyze the aforementioned input parameters and to determine their best levels which give the desired values for the analyzed tribological characteristics. The results were analyzed by statistical analysis, optimization and 3D surface plots. Accordingly, it was determined that the most effective factor for wear rate, weight loss and friction coefficients is the contribution rate. According to signal-to-noise ratios, optimum solutions can be sorted as: the highest levels of parameters except for applied load and reinforcement ratio (2500 m, 10 N, 1.5 m/s, 2 h, 1050 °C and 0 wt.%) for wear rate, certain levels of all parameters (1000 m, 10 N, 1.5 m/s, 2 h, 1050 °C and 2.5 wt.%) for weight loss and 1000 m, 15 N, 1 m/s, 1 h, 1000 °C and 0 wt.% for the coefficient of friction. The comprehensive analysis of findings has practical significance and provides valuable information for a composite material from the production phase to the actual working conditions.

Glycans in scaffold design in tissue reconstruction

2021 ◽  
pp. 088391152199784
Author(s):  
Nipun Jain ◽  
Shashi Singh
Keyword(s):  
Cell Attachment ◽  
Low Cost ◽  
Growth Conditions ◽  
Downstream Signaling ◽  
Cell Carrier ◽  
Wide Range ◽  
Proliferation And Differentiation ◽  
Different Types ◽  
Tissue Reconstruction ◽  
A Cell

Development of an artificial tissue by tissue engineering is witnessed to be one of the long lasting clarified solutions for the damaged tissue function restoration. To accomplish this, a scaffold is designed as a cell carrier in which the extracellular matrix (ECM) performs a prominent task of controlling the inoculated cell’s destiny. ECM composition, topography and mechanical properties lead to different types of interactions between cells and ECM components that trigger an assortment of cellular reactions via diverse sensing mechanisms and downstream signaling pathways. The polysaccharides in the form of proteoglycans and glycoproteins yield better outcomes when included in the designed matrices. Glycosaminoglycan (GAG) chains present on proteoglycans show a wide range of operations such as sequestering of critical effector morphogens which encourage proficient nutrient contribution toward the growing stem cells for their development and endurance. In this review we discuss how the glycosylation aspects are of considerable importance in everyday housekeeping functions of a cell especially when placed in a controlled environment under ideal growth conditions. Hydrogels made from these GAG chains have been used extensively as a resorbable material that mimics the natural ECM functions for an efficient control over cell attachment, permeability, viability, proliferation, and differentiation processes. Also the incorporation of non-mammalian polysaccharides can elicit specific receptor responses which authorize the creation of numerous vigorous frameworks while prolonging the low cost and immunogenicity of the substance.

Sign in / Sign up

Export Citation Format

Share Document