scholarly journals Biotechnological aspects of improving the quality of young brandy distillates

2021 ◽  
Vol 39 ◽  
pp. 07003
Author(s):  
Olga Chursina ◽  
Viktor Zagorouiko ◽  
Ludmila Legasheva ◽  
Alina Martynovskaya ◽  
Elena Udod
Keyword(s):  
Enzyme Preparation ◽  
Raw Materials ◽  
Sugar Content ◽  
Titratable Acidity ◽  
High Quality ◽  
Physicochemical Composition ◽  
Gas And Liquid Chromatography ◽  
High Ester ◽  
Increasing Demand

In connection with the increasing demand in high-quality raw materials for brandy production, the research intended to solve the problems of industry associated with using of low-acid or low-sugar grapes is relevant. A promising direction for improving the quality of brandy outputs is the use of yeasts with desired properties and yeast metabolism products. The aim of the research was to study the effect of biotechnological agents on physicochemical composition and quality of base wines and young brandy distillates. The experimental Kl.marxianus-based enzyme preparation with high endopolygalacturonase activity, races of yeast S.cerevisiae pure culture and L.thermotolerans strain from the Magarach collection of microorganisms of winemaking were used as biotechnological agents. Analytical studies were carried out using conventional methods, gas and liquid chromatography. The research results showed that using of yeast endopolygalacturonase based on Kl.marxianus helps to increase the yield of must (by 6 %). The L.thermotolerans strain is effective for increasing the titratable acidity of base wines (by 1.3-2.1 times). For grapes with low sugar content, it is advisable to use S.cerevisiae yeast races with a high ester-producing capacity.

Influence of agricultural techniques on yield and quality of grapes and wine

2021 ◽  
Vol 67 ◽  
pp. 29-41
Author(s):  
A. V. Dergunov ◽  
A. A. Lukyanova
Keyword(s):  
Raw Materials ◽  
Sugar Content ◽  
Total Content ◽  
Titratable Acidity ◽  
Biologically Active ◽  
Organoleptic Evaluation ◽  
Yield And Quality ◽  
Phenolic Substances ◽  
The Aesthetic

Under the conditions of changing biotic properties of terroir, it is relevant to establish the patterns of influence of different norms of the load of a grape bush in its own rooted and grafted culture on the quality of grapes, as well as the aesthetic and biological value of wine products in Russia. The objects of research were grapes and wine material of the Krasnostop AZOS variety in a grafted and rooted culture with variants of different load of shoots on the bush. The experience of studying the influence of various agrotechnical methods on the productivity of a grape plant and the quality of wine material was laid in the Anapo-Taman climatic zone of the Krasnodar Territory of Russia. The highest yield of the Krasnostop AZOS variety during the years of the study was obtained in the variant of own-rooted grape growing with its load of 36-40 shoots per bush. In our studies, there is a tendency to an increase in sugar content, and a decrease in the titratable acidity of grapes when growing vineyards of the Krasnostop AZOS variety in their own rooted culture. The most optimal ratio of sugar content and titratable acidity in the experiment was possessed by grapes from a variant of own-rooted culture with a load of 36-40 shoots/bush, here the glucoacedometric parameter was 4.36. In the studied variants, the largest amount of phenolic substances was found in wine material from self-rooted grapes with a load of 36-40 shoots per bush — 4130 mg/dm3. This had a positive effect on the organoleptic evaluation of this sample. The maximum total content of substances from a number of biologically active substances was found in wine from grape raw materials obtained from a grafted culture (134.9-147.9 mg/dm3). In 2018-2019, from the organoleptic side, wine materials from grapes of own-rooted culture proved to be of the highest quality. This advantage over the grafted crop was traced in all variants of rationing the load by the shoots of grape bushes.

Influence of the quality of raw materials on the composition and theconditions for the fermentation of apple juice

2021 ◽  
pp. 92-95
Author(s):  
Мадина Борисовна Хоконова ◽  
Ирина Шамильевна Дзахмишева ◽  
Алим Борисович Хоконов
Keyword(s):  
Dry Matter ◽  
Apple Juice ◽  
Raw Materials ◽  
Sugar Content ◽  
Titratable Acidity ◽  
Matter Content ◽  
Raw Material ◽  
Dry Matter Content ◽  
High Quality ◽  
Materials Used

Плодовый спирт получают путем спиртового брожения плодово-ягодного сока, мезги свежих плодов или выжимки после отжатия сока. Переработка нестандартной части плодово-ягодного сырья, а также вторичная переработка отходов с целью получения плодового спирта - выгодное направление, повышающее эффективность работы винодельческих предприятий и увеличивающее ассортимент выпускаемых продуктов. На основе качественного плодового спирта получают слабоалкогольные напитки типа сидра. Работа посвящена изучению способов улучшения технологических качеств плодового сырья, используемого для получения спирта, а также качественных виноматериалов для производства сидра на ООО «Чегемский Винпищепром». Установлено, что сырье характеризуется низкой величиной глюкоацидометрического показателя. Для яблок он составляет 5,8-8,8. Количество сухих веществ варьирует у сортов в пределах 9,5-11,0 %. Максимум отмечен у сорта Ренет Симиренко. Меньшее содержание сахаров отмечено у сорта Айдаред, максимальное - у сорта Джонатан. Титруемая кислотность у данных сортов варьирует от 5,5-6,0. Определена разница между яблочным соком и спиртом-сырцом по химическому составу. Крепость спирта-сырца составляет 59,3-60,3 %об. Яблочный спирт получали путем дистилляции периодическим способом. Определено, что температура охлаждения сусла не зависит от скорости сбраживания. Наиболее пригодные для производства сидра сорта яблок Айдаред, Джонатан с содержанием сухих веществ 9,5-10,0 % и скоростью сбраживания 1,5 г/л.ч. Fruit alcohol is obtained by alcoholic fermentation of fruit and berry juice, pulp of fresh fruits or pomace after squeezing the juice. Processing of non-standard parts of fruit and berry raw materials, as well as recycling waste, in order to obtain fruit alcohol, is a profitable direction that increases the efficiency of wineries and increases the range of products. Low-alcohol drinks such as cider are produced on the basis of high-quality fruit alcohol. The work is devoted to the study of ways to improve the technological qualities of fruit raw materials used to obtain alcohol, aswell as high-quality wine materials for the production of ciderat OOO Chegemsky Vinpischeprom. It was found that the raw material is characterized by a low glucoacidometric indicator. For apples, it is 5,8-8,8.The amount of dry matter varies in varieties within 9,5-11,0%.The maximum was observed in the Renet Simirenko variety. The lower sugar content was noted in the Idared variety, the maximum in the Jonathan variety. The titratable acidity of these varieties varies from 5,5-6,0.The chemical composition difference between apple juice and raw alcohol was determined. The strength of the raw alcohol is 59,3-60,3% vol. Apple alcohol was obtained by distillation in a batch wise manner. It has been determined that the cooling temperature of the wort does not depend mainly on the rate of fermentation. The most suitableapple varieties for the production of cider are Idared, Jonathan with a dry matter content of 9,5-10,0% and a fermentation rate of 1,5 g/l.H.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

Synthesis of Low Viscosity Polydimethylsiloxane Using Low Grade of Octamethylcyclotetrasiloxane

2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Raw Materials ◽  
Vitreoretinal Surgery ◽  
Production Costs ◽  
Low Grade ◽  
High Grade ◽  
High Quality ◽  
Low Viscosity ◽  
Polymerization Method

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.

scholarly journals Pop-Science on the Internet: How ULISSE Makes the Ends Meet

10.28945/2459 ◽  
2002 ◽  
Author(s):  
Simona Cerrato
Keyword(s):  
Information Technology ◽  
General Public ◽  
Scientific Community ◽  
Scientific Information ◽  
High Technology ◽  
The Internet ◽  
High Quality ◽  
Increasing Demand ◽  
Set Up

There is an increasing demand for what we can call pop-science that is pertinent scientific information dedicated to the non-specialists. This demand comes both from professional categories and the general public. Simultaneously in the scientific community there is an increasing consciousness that diffusion of the scientific information is an asset the scientific community cannot afford to overlook. The Internet is a perfect tool to meet this demand. It reaches a large and ever-increasing number of people and permits an interactive and detailed exchange of information. As an experiment of how to combine high quality services and the information technology, we have set up Ulisse - In the net of science (http://ulisse.sissa.it), an innovative Italian project for the popularisation of science via the Internet. Its main purpose is to establish a connection between scientists and the general public. Ulisse is based on three major characteristics: a) high technology to create an efficient and friendly system, b) customisation of the services, c) a network of scientists, which guaranteed the quality of the materials.

scholarly journals Reforestation of ‘Village Forest’ to Improve Sustaiability Creative Industries in Desa Siponjot

2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli
Keyword(s):  
Forest Restoration ◽  
Raw Materials ◽  
Economic Value ◽  
Economic Benefits ◽  
Musical Instruments ◽  
Creative Industries ◽  
Raw Material ◽  
High Quality ◽  
The Village

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.

scholarly journals Influence of the season and lactation on the milk composition of goats-producers of biosimilar human lactoferrin

2021 ◽  
pp. 81-91
Author(s):  
A. I. Budevich ◽  
E. V. Petrushko ◽  
D. M. Bogdanovich ◽  
V. N. Kuznetsova ◽  
Iu. K. Kirikovich
Keyword(s):  
Mass Fraction ◽  
Raw Materials ◽  
Titratable Acidity ◽  
Transgenic Animals ◽  
Freezing Temperature ◽  
Milk Composition ◽  
Human Lactoferrin ◽  
Physicochemical Composition ◽  
Nonfat Milk ◽  
Milk Solids

The seasonal variability of the physicochemical parameters of milk of both ordinary goats and goats producers of a biosimilar human lactoferrin has been established. The average values of the mass fraction of fat, protein, lactose, nonfat milk solids, density index in the second and third quarters were lower than in the first and fourth quarters. At the same time, the difference between the spring-summer and autumn-winter periods in the mass fraction of fat was 25%. In the mass fraction of protein, lactose, nonfat milk solids, density it was 5–7%. Comparative analysis of milk from goats-producers of a biosimilar human lactoferrin of various lactations revealed a number of changes in the physicochemical composition of raw materials in comparison with non-transgenic animals: an increase in the mass fraction of protein by 4–6% (P˂0.05), of lactose by 2–6 (P˂0.05), nonfat milk solids by 1–6, density by 2–5% (P˂0.05), freezing temperature by 5 and a decrease in the mass fraction of fat by 5–8% (P˂0, 05). At the same time, the indicators of active and titratable acidity of milk were similar in all groups of animals. At the same time, the concentration of human lactoferrin in the milk of producers of the second and third lactation had almost identical seasonal changes in the increase and decrease in the synthesis of lactoferrin in the mammary gland during the year: in the first quarter – 2.88 and 2.97 g/l, in the second – 4.76 and 4.63, in the third – 7.44 and 7.55 and in the fourth – 7.97 and 6.72 with an average annual value of 5.84 and 5.72 g/l, respectively.

Many Modes of Making Plant Drug Commodities

2018 ◽  
Vol 25 (4) ◽  
pp. 185-202
Author(s):  
Tagadur Suma ◽  
Byadarahalli Somashekhar ◽  
Kaliamoorthy Ravikumar
Keyword(s):  
Quality Assurance ◽  
Natural Products ◽  
Supply Chain ◽  
Traditional Medicine ◽  
Raw Materials ◽  
Biological Factors ◽  
Cascading Effect ◽  
Increasing Demand ◽  
Quality Material

World over there is an immense demand for Traditional Medicine, nutraceuticals, cosmetics, natural products. The rampantly growing industry and interests of consumers have resulted in excessive demand of the botanical materials for manufacturing products. The major challenges herbal industries are facing relates to quality assurance, use of authenticated raw materials, conforming to the regulations, sourcing of botanicals, processing protocols and more. To meet the ever increasing demand, supply chain inturn bargains on the quality material which has a cascading effect on the quality of Traditional formulations. In the process, during shortfall, it is observed that alternatives/ substitutes and context based aberrations areidentified and supplied to fulfilthe demand. This has obviously affected the Quality Assurance of the traditional formulations and the credibility. The article is a revelation of a market study in southern India related to botanical trade w.r.t to the making of different commodities at regional levels. Here attempts to define the various commodities based on biological and non-biological factors is undertaken and examples shared.

Development and production of large blast furnaces from 2015 to 2016 in China

2020 ◽  
Vol 117 (1) ◽  
pp. 108 ◽  
Author(s):  
Bing Dai ◽  
Hong-ming Long ◽  
Yong-cai Wen ◽  
Yi-long Ji ◽  
Yun-cai Liu
Keyword(s):  
Raw Materials ◽  
Blast Furnaces ◽  
Security Risk ◽  
Hot Metal ◽  
High Quality ◽  
Large Blast ◽  
Existing Problems ◽  
Cost Cutting ◽  
The Future

This article has reviewed the production status, total reductant consumption, raw materials and operation principle indexes of large blast furnaces in China from 2015 to 2016. The developing actuality of Chinese large BFs has been quantitatively analyzed and the existing problems have been proposed clearly. Based on that, maintaining production stable, enhancing the quality of raw materials and improving the operation principles are suggested. Large BFs take advantages of high-quality hot metal, energy saving, cost-cutting, high mechanization and automation levels and are sufficient to meet the challenges of economic crisis, environmental pressure and security risk form the future. Thus, the number of large BFs in China will continue to increase in the future.

scholarly journals New technological and technical solutions in dietary pear compote production

2020 ◽  
Vol 161 ◽  
pp. 01056
Author(s):  
Magomed Akhmetov ◽  
Amiiat Demirova ◽  
Vladimir Piniaskin ◽  
R.A. Rakhmanova
Keyword(s):  
Water Vapor ◽  
Traditional Method ◽  
Raw Materials ◽  
Hot Water ◽  
Saturated Water Vapor ◽  
High Quality ◽  
Saturated Water ◽  
Preliminary Preparation ◽  
Physical And Chemical

Perfection of technological processes, both in preliminary preparation of raw materials and during the final mandatory step of pasteurization, plays a key role in ensuring the quality of finished products, which is important in the production of canned dietary products. The aim of the research was to develop a more efficient way of blanching raw materials with its hardware and soft pasteurization modes, which will allow the production of high quality and competitive compotes for functional nutrition. We have developed and proposed a method of pulse-steam blanching of raw materials directly in glass jars with saturated water vapor, instead of the traditional method using hot water. The essence of the method is as follows. Fruits stacked in jars are pulse heated for 100–160 seconds (depending on the volume of the container) with saturated water vapor with temperature of 105–110 °C, and then fed into jars with cycles of 10 and 10 seconds respectively. The use of pulsed supply of saturated water vapor contributes to achieving more even heating of the fruit, which are characterized by a relatively large internal thermal resistance, causing overheating of the surface layers, and also provides an increase in the temperature of the product, which allows to pour into the jars syrup at relatively high temperature (97–98 °C), while the traditional technology accounts for the temperature of only 80–85 °C. Implementation of this method ensures the temperature level of the product entering the pasteurization stage being 78–80 °C, as opposed to the traditional method, where the temperature of the product is 45–48 °C. After that, the jars will be filled with syrup with a temperature of 97–98 °C, sealed and sent for pasteurization on accelerated modes. To implement the new method of blanching, the design of the device for pulse-steam blanching of fruits in glass jars has been developed. New thermal sterilization regimes have been developed, taking into account the increased temperature of the product after sealing and improved technology for the production of pear compote. The results of physical and chemical testing confirm the high quality of the finished product.

Sign in / Sign up

Export Citation Format

Share Document