scholarly journals Labelling via [Al18F]2+ Using Precomplexed Al-NODA Moieties

2021 ◽  
Vol 14 (8) ◽  
pp. 818
Author(s):  
Daniel Kang ◽  
Ulrich Simon ◽  
Felix M. Mottaghy ◽  
Andreas T. J. Vogg
Keyword(s):  
Reaction Time ◽  
Radiochemical Yield ◽  
Clinical Routine ◽  
One Pot ◽  
The Past ◽  
Important Approach ◽  
Patient Doses ◽  
A New Technique ◽  
The Impact ◽  
18F Fluoride

Over the past 20 years, 68Ga-labelled radiopharmaceuticals have become an important part in clinical routine. However, the worldwide supply with 68Ge/68Ga generators is limited as well as the number of patient doses per batch of 68Ga radiopharmaceutical. In the recent years, a new technique appeared, making use of the ease of aqueous labelling via chelators as with 68Ga but using 18F instead. This technique takes advantage of the strong coordinative bond between aluminium and fluoride, realized in the aqueous cation [Al18F]2+. Most applications to date make use of one-pot syntheses with free Al(III) ions in the system. In contrast, we investigated the labelling approach split into two steps: generating the Al-bearing precursor in pure form and using this Al compound as a precursor in the labelling step with aqueous [18F]fluoride. Hence, no free Al3+ ions are present in the labelling step. We investigated the impact of parameters: temperature, pH, addition of organic solvent, and reaction time using the model chelator NH2-MPAA-NODA. With optimized parameters we could stably achieve a 80% radiochemical yield exerting a 30-min reaction time at 100 °C. This technique has the potential to become an important approach in radiopharmaceutical syntheses.

scholarly journals One pot synthesis of 3, 4-dihydropyrimidine-2(1H)-thiones using orange peel powder under ultrasonic irradiation

2020 ◽  
Vol 9 (1) ◽  
pp. 919-923
Keyword(s):  
Reaction Time ◽  
Ultrasonic Irradiation ◽  
Heterocyclic Compounds ◽  
Multicomponent Reactions ◽  
Orange Peel ◽  
Biologically Active ◽  
High Yield ◽  
Atom Economy ◽  
One Pot ◽  
The Past

Biginelli, an important multicomponent reaction provides an avenue for the synthesis of different biologically active heterocyclic compounds. During the past decade, one pot multicomponent reactions have attracted the attention of organic and medicinal chemists due to high atom economy, time and enery saving convergent nature. The present manuscript reports a simple one pot three component synthesis of 3, 4-dihydroprimidin-2(1H)-thiones from various diversely substituted aldehydes, ethyl acetoacetate and thiourea using a orange peel powder as a natural catalyst on ultrasonic irradiation in aqueous medium as the solvent. The advantages of this reaction are less reaction time, high yield, easy availability of the catalyst and green nature.

Fluorescent potentiometric dyes for membrane-potential imaging

1994 ◽  
Vol 52 ◽  
pp. 166-167
Author(s):  
Leslie M. Loew
Keyword(s):  
Membrane Potential ◽  
Single Cells ◽  
Quantitative Imaging ◽  
Optical Recording ◽  
Biological Processes ◽  
Major Focus ◽  
The Past ◽  
Excitable Systems ◽  
Major Application ◽  
The Impact

A major application of potentiometric dyes has been the multisite optical recording of electrical activity in excitable systems. After being championed by L.B. Cohen and his colleagues for the past 20 years, the impact of this technology is rapidly being felt and is spreading to an increasing number of neuroscience laboratories. A second class of experiments involves using dyes to image membrane potential distributions in single cells by digital imaging microscopy - a major focus of this lab. These studies usually do not require the temporal resolution of multisite optical recording, being primarily focussed on slow cell biological processes, and therefore can achieve much higher spatial resolution. We have developed 2 methods for quantitative imaging of membrane potential. One method uses dual wavelength imaging of membrane-staining dyes and the other uses quantitative 3D imaging of a fluorescent lipophilic cation; the dyes used in each case were synthesized for this purpose in this laboratory.

Perceived Burden of Informal Caregivers of a Chronically Ill Older Family Member

GeroPsych ◽  
2011 ◽  
Vol 24 (3) ◽  
pp. 143-154 ◽  
Author(s):  
Elmar Gräßel ◽  
Raffaela Adabbo
Keyword(s):  
Family Member ◽  
Informal Caregiver ◽  
Chronically Ill ◽  
Stress Model ◽  
The Past ◽  
Perceived Burden ◽  
Hypothetical Construct ◽  
Care Situation ◽  
The Impact ◽  
Further Development

The burden of caregivers has been intensively researched for the past 30 years and has resulted in a multitude of individual findings. This review illustrates the significance of the hypothetical construct of perceived burden for the further development and design of the homecare situation. Following explanations regarding the term informal caregiver, we derive the construct burden from its conceptual association with the transactional stress model of Lazarus and Folkman. Once the extent and characteristics of burden have been set forth, we then present the impact of perceived burden as the care situation. The question of predictors of burden will lead into the last section from which implications can be derived for homecare and relief of caregivers.

Soziale Disziplinierung im flexiblen Kapitalismus

2004 ◽  
Vol 34 (136) ◽  
pp. 339-356
Author(s):  
Tobias Wölfle ◽  
Oliver Schöller
Keyword(s):  
Social Welfare ◽  
Second Step ◽  
Social Rights ◽  
Federal Law ◽  
Capitalist Development ◽  
The Core ◽  
The Past ◽  
The Impact ◽  
Municipal Level

Under the term “Hilfe zur Arbeit” (aid for work) the federal law of social welfare subsumes all kinds of labour disciplining instruments. First, the paper shows the historical connection of welfare and labour disciplining mechanisms in the context of different periods within capitalist development. In a second step, against the background of historical experiences, we will analyse the trends of “Hilfe zur Arbeit” during the past two decades. It will be shown that by the rise of unemployment, the impact of labour disciplining aspects of “Hilfe zur Arbeit” has increased both on the federal and on the municipal level. For this reason the leverage of the liberal paradigm would take place even in the core of social rights.

Regulatory and sustainability initiatives lead to improved polyaminopolyamide epichlorohydrin (PAE) wet-strength resins and paper products

TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 519-532 ◽  
Author(s):  
Mark Crisp ◽  
Richard Riehle
Keyword(s):  
Health And Safety ◽  
Cost Effective ◽  
Worker Safety ◽  
Regulatory Requirements ◽  
Wet Strength ◽  
The Past ◽  
Consumer Safety ◽  
Federal Institute ◽  
Sustainability Initiatives ◽  
The Impact

Polyaminopolyamide-epichlorohydrin (PAE) resins are the predominant commercial products used to manufacture wet-strengthened paper products for grades requiring wet-strength permanence. Since their development in the late 1950s, the first generation (G1) resins have proven to be one of the most cost-effective technologies available to provide wet strength to paper. Throughout the past three decades, regulatory directives and sustainability initiatives from various organizations have driven the development of cleaner and safer PAE resins and paper products. Early efforts in this area focused on improving worker safety and reducing the impact of PAE resins on the environment. These efforts led to the development of resins containing significantly reduced levels of 1,3-dichloro-2-propanol (1,3-DCP) and 3-monochloropropane-1,2-diol (3-MCPD), potentially carcinogenic byproducts formed during the manufacturing process of PAE resins. As the levels of these byproducts decreased, the environmental, health, and safety (EH&S) profile of PAE resins and paper products improved. Recent initiatives from major retailers are focusing on product ingredient transparency and quality, thus encouraging the development of safer product formulations while maintaining performance. PAE resin research over the past 20 years has been directed toward regulatory requirements to improve consumer safety and minimize exposure to potentially carcinogenic materials found in various paper products. One of the best known regulatory requirements is the recommendations of the German Federal Institute for Risk Assessment (BfR), which defines the levels of 1,3-DCP and 3-MCPD that can be extracted by water from various food contact grades of paper. These criteria led to the development of third generation (G3) products that contain very low levels of 1,3-DCP (typically <10 parts per million in the as-received/delivered resin). This paper outlines the PAE resin chemical contributors to adsorbable organic halogens and 3-MCPD in paper and provides recommendations for the use of each PAE resin product generation (G1, G1.5, G2, G2.5, and G3).

Overseas Development Administration. A Guide to Social Analysis for Projects in Developing Countries. London: HMSO. 1995. viii+248 pages. Hardbound. £18.95.

1996 ◽  
Vol 35 (2) ◽  
pp. 189-190
Author(s):  
Mir Annice Mahmood
Keyword(s):  
Developing Countries ◽  
Social Change ◽  
Practical Experience ◽  
Development Projects ◽  
Social Analysis ◽  
Economic Perspective ◽  
Human Environment ◽  
The Past ◽  
The Impact ◽  
Overseas Development

This book, hereinafter referred to as the Guide, has been developed for those social analysts (e.g., anthropologists, sociologists, and human geographers) who have had little or no practical experience in applying their knowledge as development practitioners. In the past, development projects would be analysed from a narrow financial and economic perspective. But with the evolution of thinking on development, this narrow financial and economic aspect has now been broadened to include the impact on society as the very meaning of development has now come to symbolise social change. Thus, development is not restricted only to plans and figures; the human environment in its entirety is now considered for analysis while designing and implementing development projects.

The Impact of War on Population Health

2014 ◽  
Vol 1 (1) ◽  
Author(s):  
Turkan Ahmet
Keyword(s):  
Health Care ◽  
Health Status ◽  
Health Care Services ◽  
Negative Effects ◽  
The Past ◽  
Care Services ◽  
Physical Environments ◽  
The Social ◽  
Personal Experiences ◽  
The Impact

The past few decades of ongoing war in Iraq has had a dramatic impact on the health of Iraq’s population. Wars are known to have negative effects on the social and physical environments of individuals, as well as limit their access to the available health care services. This paper explores the personal experiences of my family members, who were exposed to war, as well as includes information that has been reviewed form many academic sources. The data aided in providing recommendations and developing strategies, on both local and international levels, to improve the health status of the populations exposed to war.

Impact of dust and sand storms on the aviation operation and assessment of conditions for their occurrence at aerodromes in European Russia

2020 ◽  
Vol 4 ◽  
pp. 78-95
Author(s):  
A.R. Ivanova ◽  
◽  
E.N. Skriptunova ◽  
N.I. Komasko ◽  
A.A. Zavialova ◽  
...  
Keyword(s):  
Seasonal Variations ◽  
Dust Storms ◽  
European Russia ◽  
Air Transport ◽  
Review Of Literature ◽  
Dust Transport ◽  
Air Masses ◽  
The Past ◽  
Sand Storm ◽  
The Impact

A review of literature on the impact of dust and sand storms on the air transport operation is presented. Observational data on dust storms at the aerodromes of European Russia for the period of 2001-2019 are analyzed. The seasonal variations in dust transport episodes at aerodromes and its relationship with visibility changes are discussed. The characteristics of dusty air masses and advection are given. It is concluded that the frequency of dust transfer episodes for the aerodromes under study has decreased over the past five years, except for Gumrak aerodrome (Volgograd). Keywords: dust storm, sand storm, aviation, visibility, seasonal variations, aerodrome оf European Russia

One-Pot, Regioselective Synthesis of Homopropargyl Alcohols using Propargyl Bromide and Carbonyl Compound by the Mg-mediated Reaction under Solvent-free Conditions

2020 ◽  
Vol 17 (6) ◽  
pp. 438-442
Author(s):  
Xiaofang Ma ◽  
Shunxi Li ◽  
Samrat Devaramani ◽  
Guohu Zhao ◽  
Daqian Xu
Keyword(s):  
Reaction Time ◽  
Organic Synthesis ◽  
Carbonyl Compounds ◽  
Solvent Free ◽  
Propargyl Bromide ◽  
Important Goal ◽  
One Pot ◽  
Short Reaction Time ◽  
Solvent Free Conditions ◽  
Volatile Organic

The elimination of volatile organic solvents in organic synthesis is the most important goal in “Green” chemistry. We report a simple, efficient and facile method for the addition of progargyl bromide to carbonyl compounds using Mg metal as a mediator under solvent-free conditions which could regioselectively generate homopropargyl alcohols efficiently in good to excellent yields. The procedure has advantages such as short reaction time, operationally simple, excellent product yields, high regioselectivity and organic solvent-free.

Pupil with Obsessive-Compulsive Disorder

2017 ◽  
Vol 7 (2) ◽  
pp. 7-25
Author(s):  
Karolina Diallo
Keyword(s):  
Obsessive Compulsive Disorder ◽  
School Performance ◽  
School Environment ◽  
Detrimental Effect ◽  
Obsessive Compulsive ◽  
Compulsive Disorder ◽  
The Past ◽  
And Performance ◽  
The Impact

Pupil with Obsessive-Compulsive Disorder. Over the past twenty years childhood OCD has received more attention than any other anxiety disorder that occurs in the childhood. The increasing interest and research in this area have led to increasing number of diagnoses of OCD in children and adolescents, which affects both specialists and teachers. Depending on the severity of symptoms OCD has a detrimental effect upon child's school performance, which can lead almost to the impossibility to concentrate on school and associated duties. This article is devoted to the obsessive-compulsive disorder and its specifics in children, focusing on the impact of this disorder on behaviour, experience and performance of the child in the school environment. It mentions how important is the role of the teacher in whose class the pupil with this diagnosis is and it points out that it is necessary to increase teachers' competence to identify children with OCD symptoms, to take the disease into the account, to adapt the course of teaching and to introduce such measures that could help children reduce the anxiety and maintain (or increase) the school performance within and in accordance with the school regulations and curriculum.

Sign in / Sign up

Export Citation Format

Share Document