scholarly journals Description by the method of combustion mass transfer of a gasoline-hydrogen-air mixture and reduction of harm to the environment

2021 ◽  
Vol 2131 (3) ◽  
pp. 032067
Author(s):  
J Ismatov ◽  
F Matmurodov ◽  
A Kholikov ◽  
A Abdullaev ◽  
J Djalilov ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Raw Materials ◽  
Combustion Process ◽  
Combustion Chambers ◽  
Environmental Friendliness ◽  
Automobile Engines ◽  
Harmful Substances ◽  
Transfer Method ◽  
Schematic Diagrams

Abstract The prospects for the use of hydrogen in automobile engines have been studied, it is possible to summarize, first of all, in relation to environmental friendliness, renewable and unlimited raw materials and the unique characteristics of the engine, which allows the use of hydrogen without making fundamental changes in modern engines. The norms for the emission of harmful substances into the environment are given and ways to reduce the emission of these harmful substances are shown. The schematic diagrams of the hydrogen electrolyzer are developed and the transfer of hydrogen to the combustion chambers is indicated. The paper describes the combustion process of a gasoline-hydrogen-air mixture using the mass transfer method.

scholarly journals The Influence of Cement Substitution by Biomass Fly Ash on the Polymer–Cement Composites Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3079
Author(s):  
Beata Jaworska ◽  
Dominika Stańczak ◽  
Joanna Tarańska ◽  
Jerzy Jaworski
Keyword(s):  
Fly Ash ◽  
Building Materials ◽  
Raw Materials ◽  
Combustion Process ◽  
Biomass Combustion ◽  
Cement Composites ◽  
Cement Mortars ◽  
Mineral Additive ◽  
Biomass Fly Ash

The generation of energy for the needs of the population is currently a problem. In consideration of that, the biomass combustion process has started to be implemented as a new source of energy. The dynamic increase in the use of biomass for energy generation also resulted in the formation of waste in the form of fly ash. This paper presents an efficient way to manage this troublesome material in the polymer–cement composites (PCC), which have investigated to a lesser extent. The research outlined in this article consists of the characterization of biomass fly ash (BFA) as well as PCC containing this waste. The characteristics of PCC with BFA after 3, 7, 14, and 28 days of curing were analyzed. Our main findings are that biomass fly ash is suitable as a mineral additive in polymer–cement composites. The most interesting result is that the addition of biomass fly ash did not affect the rheological properties of the polymer–cement mortars, but it especially influenced its compressive strength. Most importantly, our findings can help prevent this byproduct from being placed in landfills, prevent the mining of new raw materials, and promote the manufacture of durable building materials.

STUDY OF EXTERNAL MASS TRANSFER DURING DRYING OF BERRY RAW MATERIALS TAKING INTO THE SHRINKAGE PHENOMENON

2019 ◽  
Author(s):  
А.В. АКУЛИЧ ◽  
Л.А. ГОСТИНЩИКОВА
Keyword(s):  
Mass Transfer ◽  
Energy Supply ◽  
Raw Materials ◽  
Mass Transfer Rate ◽  
Experimental Studies ◽  
Volume Shrinkage ◽  
External Mass Transfer ◽  
Transfer Coefficients ◽  
Ir Radiation ◽  
Criterial Equations

Исследованы закономерности внешнего массообмена при сушке ягодного сырья для различных способов энергоподвода. Установлено, что ягоды при сушке подвержены значительной объемной (72–81%) и линейной (35–43%) усадке, которую необходимо учитывать при расчете коэффициентов массоотдачи. Объекты исследования – ягоды черники, красной и черной смородины. Проведены экспериментальные исследования по сушке ягодного сырья при конвективном и конвективном с ИК-излучением способах энергоподвода. Исследования проведены при скорости сушильного агента хса1,2 м/с и температуре tса 70°С. Получены критериальные уравнения внешнего массоообмена при сушке ягод для периода постоянной скорости, учитывающие объемную усадку. Определено, что при сушке с конвективным энергоподводом объемная усадка при одном и том же значении критерия Рейнольдса оказывает на 12–20% большее влияние на интенсивность массоообмена для красной смородины по сравнению с черникой и черной смородиной. При сушке с конвективным энергоподводом, ИК-излучением и предварительным прокалыванием объемная усадка наиболее существенно влияет на массообмен для черной смородины, протекающий в 1,5–1,8 раза интенсивнее по сравнению с черникой и красной смородиной. Полученные критериальные уравнения могут быть использованы при расчете и проектировании установок для сушки ягодного сырья. The laws of external mass transfer during drying of berry raw materials for various methods of energy supply are investigated. It is established that the berries during drying are subject to significant volumetric (72–81%) and surface (35–43%) shrinkage, which must be taken into account when calculating the mass transfer coefficients. The objects of the study were various berries: blueberries, red and black currants. Experimental studies have been carried out on the drying of selected berries both in the case of convective and convective methods with IR radiation. Investigations were carried out at a drying agent velocity хса1,2 m/s and its temperature tca70°С. The criterion equations of external mass transfer during drying of berries for a period of constant speed, taking into account the volume shrinkage, are obtained. It was determined that during drying with convective energy supply, volume shrinkage with the same value of the Reynolds criterion on 12–20% has a greater effect on the mass transfer rate for red currants. When drying with convective energy supply, IR radiation and preliminary piercing, the volume shrinkage most significantly affects the mass transfer for black currants, which is 1,5–1,8 times more intense than blueberries and red currants. The obtained criterial equations can be used in the calculation and design of berries dryers.

scholarly journals Hydrogen application in internal combustion engines

2020 ◽  
Vol 21 (1) ◽  
pp. 14-19
Author(s):  
Arthur R. Asoyan ◽  
Igor K. Danilov ◽  
Igor A. Asoyan ◽  
Georgy M. Polishchuk
Keyword(s):  
Burning Rate ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Hydrocarbon Fuel ◽  
Internal Combustion ◽  
Technical Solution ◽  
Combustion Engines ◽  
Environmental Friendliness ◽  
Petroleum Origin ◽  
Order Of Magnitude

A technical solution has been proposed to reduce the consumption of basic hydrocarbon fuel, to improve the technical, economic and environmental performance of internal combustion engines by affecting the combustion process of the fuel-air mixture with a minimum effective mass fraction of hydrogen additive in the fuel-air mixture. The burning rate of hydrogen-air mixtures is an order of magnitude greater than the burning rate of similar mixtures based on gasoline or diesel fuel, compared with the former, they are favorably distinguished by their greater detonation stability. With minimal additions of hydrogen to the fuel-air charge, its combustion time is significantly reduced, since hydrogen, having previously mixed with a portion of the air entering the cylinder and burning itself, effectively ignites the mixture in its entirety. Issues related to the accumulation of hydrogen on board the car, its storage, explosion safety, etc., significantly inhibit the development of mass production of cars using hydrogen fuel. The described technical solution allows the generation of hydrogen on board the car and without accumulation to use it as an additive to the main fuel in internal combustion engines. The technical result is to reduce the consumption of hydrocarbon fuels (of petroleum origin) and increase the environmental friendliness of the car due to the reduction of the emission of harmful substances in exhaust gases.

scholarly journals RESEARCH METHODOLOGY IN ENTERPRISES, AUDIT AND INNOVATIONS TO IMPROVE ENTERPRISE MANAGEMENT

2021 ◽  
Author(s):  
Valerii Nemchenko ◽  
Yurii Melnyk ◽  
Hanna Nemchenko
Keyword(s):  
Life Expectancy ◽  
Raw Materials ◽  
Scientific Research ◽  
Enterprise Management ◽  
Environmental Friendliness ◽  
Medical Standards ◽  
Main Emphasis ◽  
The World ◽  
Financial Research

The article considers the methodology of scientific research at enterprises, the main emphasis is placed on the issue of audit and innovation in improving enterprise management. Yes, today the world is in crisis in the economy due to the COVID-19 virus. However, appropriate measures are needed to get out of this situation as soon as possible. Universities pay special attention to research that provides new knowledge, helps in solving problems, decision-making, discovery, invention, conflict resolution. Without "theory", appropriate research, practice is impossible, as the article proves. Yes, an important factor that determines the success of the audit is the audit. Its absence causes a crisis in the company, which can lead to bankruptcy. Therefore, sufficient attention should be paid to the issue of audit in scientific research. Moreover, innovations contribute to the development of enterprises. However, it does not make sense to implement them without appropriate scientific and financial research - innovations must be relevant to the company, make a profit after their implementation, as well as stimulated by the state. However, it is equally important to take into account innovation, environmental friendliness and profitability. Food quality management depends not only on the company that produces them, processing technology, suppliers of raw materials (agriculture), but also on medical standards, recommendations, marketing, consumer market research, their features. Production in the world is becoming human-oriented, so it changes the guidelines, management not only in the enterprise but also in the regions and society. It is no coincidence that in international practice more and more often to determine the quality of life in the country instead of GDP use the happiness index, which includes along with the level of income and life expectancy. There is a need to "supplement" medical expertise with economic and environmental ones. We are talking about the "birth" of a new medical, economic and environmental examination of food products (MEEEFP). The higher the quality of food, the higher its competitiveness, better management in a saturated market, the quality of the environment and the quality of labor reproduction, increase life expectancy, GDP of the region and the country. This quality can be achieved only with the help of innovative technologies.

scholarly journals Determination Contents of Total Phenolic Pigments and Spectrophotometric Characterization of Crude Extracts of Ten Tinctorial Plants of Niger which is Usable in Solar Energy

2018 ◽  
Vol 14 (33) ◽  
pp. 389
Author(s):  
Souley Kallo Moutari ◽  
Ayouba Mahamane Abdoulkadri ◽  
Abdourahamane Saidou Boulhassane ◽  
Adamou Rabani ◽  
Ikhiri Khalid
Keyword(s):  
Solar Energy ◽  
Raw Materials ◽  
Dye Sensitized Solar Cells ◽  
Electrical Energy ◽  
Total Phenolic ◽  
Environmental Friendliness ◽  
Pigment Synthesis ◽  
Chlorophyll Pigments ◽  
Crude Extracts ◽  
High Concentrations

Dye Sensitized-Solar Cells (DSSCs) have been extensively investigated because of their environmental friendliness and low production cost. At the heart of these is the photosensitive pigment that plays a key role in the collection of sunlight radiations and its conversion into electrical energy. However, the toxicity and the cost of pigment synthesis limit the increased use of these prototypes. Natural pigments can be an effective, sustainable, and inexpensive alternative. This paper focuses on determining the main phenolic pigments contents and evaluating the solar light collection capacity of ten (10) tinctorial plants crude extracts, via UV-Visible Spectrophotometry. High concentrations of total polyphenols (46.54 mgEqAG/g), flavonoids (10.95 mgEqQuer/g), anthocyanins (181.9 mgL-1 ), and tannins (40.1 mgL-1 ) were recorded in some extracts of these plants. Absorption spectra showed intense absorption domains around 280 nm in the ultraviolet (UV), and also in the visible (400 to 700 nm). These absorptions would be attributed to the π-π* and n-π* electron transitions of the chromophores present in the anthocyanin, flavonoid, carotenoid, and chlorophyll pigments of these plants. The high contents of pigments and the appropriate spectrophotochemical properties make the extracts of these tinctorial plants to become potential raw materials that are useful in solar energy technology.

scholarly journals Identification of Free Radical in Main Stream Cigarette Smoke in Cigarette with Clove mix (Kretek) and Cigarette without Clove mix (White)

2020 ◽  
Vol 21 (2) ◽  
pp. 73
Author(s):  
Ni Kadek Nova Anggarani ◽  
D.J. Djoko H.S. ◽  
Unggul P. Juswono
Keyword(s):  
Cigarette Smoke ◽  
Combustion Process ◽  
Chemical Compounds ◽  
Current Data ◽  
Main Stream ◽  
A Value ◽  
Harmful Substances ◽  
Free Gases ◽  
Smoke Sample ◽  
Landé Factors

Cigarette smoke is a source of free radicals. Cigarette smoke is a component of Aerosols and free gases that contain large amounts of chemical compounds. Cigarette smoke can be divided into two: main smoke and side smoke. The main smoke of cigarettes inhaled by smokers is known to cause a buildup of harmful substances and causes of oxidative stress so that research is carried out using ESR Leybold Heraeus. The sample used is a smoke sample from two types of cigarettes that are popular in Indonesia. The measurement is done by pulling smoke directly into the measurement tube. Then the resonance pattern is observed and the external magnetic field is calculated and the value of the lande factor is based on frequency and current data. Measurements result showed resonance in both types of cigarettes, at a frequency of 32.4-70.8 MHz and obtained values of lande factors that vary and have a value between 1.9-2.1 with two acquisition values that are outside the range that is 1.8368; and 2.2060. There are differences in the number of resonances that occur for each sample. This difference can be due to differences in the constituent of content and the texture of cigarettes which can affect the results of the combustion process.

scholarly journals Synthesis of Deuterated Surrogate Standards for the Analysis of Legally Regulated Substances in Cosmetics

2020 ◽  
Author(s):  
Fariña Beatriz ◽  
Carlos González ◽  
Manuel Lolo ◽  
F. Javier Sardina
Keyword(s):  
European Union ◽  
Continuous Improvement ◽  
Analytical Methods ◽  
Raw Materials ◽  
Synthetic Methods ◽  
The European Union ◽  
Cosmetic Products ◽  
Musk Xylene ◽  
Harmful Substances ◽  
Musk Ambrette

<p>The presence of harmful substances in cosmetic products is regulated in most countries. In the European Union the Regulation (EC) No. 1223/2009 lays down the requirements for the marketing of cosmetic products. Among others, important families of compounds restricted in the Regulation are musks, allergenic fragrances and phthalates. To ensure product safety, improved analytical methods capable of reliably and reproducibly detecting the presence of traces of prohibited and/or restricted ingredients in raw materials and finished products are required. </p> <p>For the continuous improvement of the reliability of the analytical methods developed to check the compliance of cosmetic products with the Regulation, the use of appropriate surrogate standards or contaminants (substances that are added to the samples to be analyzed to establish the recovery and the reproducibility of the quantification of the analytes) are of utmost importance. One of the best kinds of surrogate standards are isotopically labeled analogs of the analytes of interest. In this work, several synthetic methods have been developed to prepare isotopically labeled analogs of atranol, chloroatranol, di-n-octylphthalate, musk xylene, and musk ambrette, which are restricted substances in cosmetic articles.</p>

scholarly journals Processes of heat and mass transfer during drying of red beetroot

2020 ◽  
Vol 6 (2) ◽  
pp. 81-87
Author(s):  
Zhanna Petrova ◽  
◽  
Kateryna Samoilenko ◽  
Vitaly Vishnevsky
Keyword(s):  
Mass Transfer ◽  
Energy Consumption ◽  
Heat And Mass Transfer ◽  
Raw Materials ◽  
Antioxidant Properties ◽  
Calculation Model ◽  
Experimental Results ◽  
Biologically Active ◽  
Raw Material ◽  
Drying Process

Red beetroot is the main raw material which has a high content of betanine with antioxidant properties. An important emphasis in the processing of antioxidant raw materials by drying is to reduce energy consumption for the dehydration process, the maximum preservation of biologically active substances, and to reduce the cost of the final product. Drying is a complex and energy-intensive process. Therefore, to optimize energy consumption during drying and selection of rational modes of dehydration, it is necessary to apply the calculated analysis of heat and mass transfer on the basis of adequate mathematical models. Calculated and experimental results are compared. In general, the comparison of the results of numerical modeling of convection drying processes of the red beetroot sample with the experimental results showed their rather satisfactory qualitative agreement. The calculation model can be used to approximate the characteristics of the drying process of red beetroot, in particular the time required for drying. The obtained results of calorimetric studies allow stating that with correctly selected compositions, not only the components of native raw materials are stabilized, but also the drying process is intensified with the reduction of energy consumption to process.

scholarly journals Impact of Simulated Biogas Compositions (CH4 and CO2) on Vibration, Sound Pressure and Performance of a Spark Ignition Engine

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7037
Author(s):  
Donatas Kriaučiūnas ◽  
Tadas Žvirblis ◽  
Kristina Kilikevičienė ◽  
Artūras Kilikevičius ◽  
Jonas Matijošius ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Negative Correlation ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Sound Pressure ◽  
Raw Materials ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Positive Correlation

Biogas has increasingly been used as an alternative to fossil fuels in the world due to a number of factors, including the availability of raw materials, extensive resources, relatively cheap production and sufficient energy efficiency in internal combustion engines. Tightening environmental and renewable energy requirements create excellent prospects for biogas (BG) as a fuel. A study was conducted on a 1.6-L spark ignition (SI) engine (HR16DE), testing simulated biogas with different methane and carbon dioxide contents (100CH4, 80CH4_20CO2, 60CH4_40CO2, and 50CH4_50CO2) as fuel. The rate of heat release (ROHR) was calculated for each fuel. Vibration acceleration time, sound pressure and spectrum characteristics were also analyzed. The results of the study revealed which vibration of the engine correlates with combustion intensity, which is directly related to the main measure of engine energy efficiency—break thermal efficiency (BTE). Increasing vibrations have a negative correlation with carbon monoxide (CO) and hydrocarbon (HC) emissions, but a positive correlation with nitrogen oxide (NOx) emissions. Sound pressure also relates to the combustion process, but, in contrast to vibration, had a negative correlation with BTE and NOx, and a positive correlation with emissions of incomplete combustion products (CO, HC).

Sign in / Sign up

Export Citation Format

Share Document